TYPENCODE Suche | *NOT READY*: #CODE

Suchwort-Vorschlag

Vorgeschlagene Teilenummer

Auslaufprodukte

TSC series carbide long neck ball end mill, 2-flute / long neck model

Klicken Sie auf dieses Bild, um es zu vergrößern.

Mengenrabatt

[Merkmale]
-Lange Halsform geeignet für tiefes Hohlraumfräsen
-Es hat eine Beschichtung mit hoher Oxidationsbeständigkeit und hoher Härte, und erreicht eine lange Lebensdauer. Effektiv bei Hochgeschwindigkeitsbearbeitung und Trockenbearbeitung als Beschichtungseigenschaften
-Kann nachgeschliffen werden. Bitte beachten Sie die Seite "Nachschleifservice" für Anwendungsprozeduren, Leistungsspektrum, Preise, etc.

TS
General Steel
2 Flutes

Teilenummer

Hier finden Sie die Teilenummern
zu dem gesuchten Artikel

Zeichnung
Teilenummern
Spezifikationen und Preis
Funktionen und Beispiele

TSC series carbide long neck ball end mill, 2-flute / long neck model:Related Image

Daten, die angezeigt werden sollen: 30; 45; 60

1
2
3
4
5
Weiter >>

Teilenummer
LN-TSC-BEM2S0.8-[8-20/1]
LN-TSC-BEM2S0.9-[8-20/1]
LN-TSC-BEM2S0.75-[8-20/1]
LN-TSC-BEM2S1-[8-21/1]
LN-TSC-BEM2S1.5-[9-23/1]
LN-TSC-BEM2S1.25-[9-22/1]
LN-TSC-BEM2S1.75-[10-24/1]
LN-TSC-BEM2S2-[11-28/1]
LN-TSC-BEM2S2.5-[13-30/1]
TSC-BEM2LB0.05-0.2
TSC-BEM2LB0.05-0.3
TSC-BEM2LB0.05-0.5
TSC-BEM2LB0.1-0.3
TSC-BEM2LB0.1-0.5
TSC-BEM2LB0.1-0.75
TSC-BEM2LB0.1-1
TSC-BEM2LB0.1-1-6
TSC-BEM2LB0.1-1.5
TSC-BEM2LB0.1-1.5-6
TSC-BEM2LB0.1-1.25
TSC-BEM2LB0.1-2
TSC-BEM2LB0.1-2-6
TSC-BEM2LB0.1-2.5
TSC-BEM2LB0.1-3
TSC-BEM2LB0.2-0.5
TSC-BEM2LB0.2-0.75
TSC-BEM2LB0.2-1
TSC-BEM2LB0.2-1-6
TSC-BEM2LB0.2-1.5
TSC-BEM2LB0.2-1.5-6
TSC-BEM2LB0.2-2
TSC-BEM2LB0.2-2-6
TSC-BEM2LB0.2-2.5
TSC-BEM2LB0.2-3
TSC-BEM2LB0.2-3-6
TSC-BEM2LB0.2-3.5
TSC-BEM2LB0.2-4
TSC-BEM2LB0.2-4-6
TSC-BEM2LB0.2-4.5
TSC-BEM2LB0.2-5
TSC-BEM2LB0.2-6
TSC-BEM2LB0.3-1
TSC-BEM2LB0.3-1.5
TSC-BEM2LB0.3-1.5-6
TSC-BEM2LB0.3-2
TSC-BEM2LB0.3-2-6
TSC-BEM2LB0.3-2.5
TSC-BEM2LB0.3-2.5-6
TSC-BEM2LB0.3-3
TSC-BEM2LB0.3-3-6
TSC-BEM2LB0.3-3.5
TSC-BEM2LB0.3-4
TSC-BEM2LB0.3-4-6
TSC-BEM2LB0.3-4.5
TSC-BEM2LB0.3-5
TSC-BEM2LB0.3-5-6
TSC-BEM2LB0.3-6
TSC-BEM2LB0.3-6-6
TSC-BEM2LB0.3-6.5
TSC-BEM2LB0.3-7

Standard-Stückpreis	Mindestbestellmenge	Mengenrabatt	Reguläre Versanddauer ?	R Size (mm)	Flute Length (ℓ) (mm)	Overall Length (L) (mm)	Length Under Neck (ℓ1) (mm)	Shank Diameter (d) (mm)	R Precision (μm)	Inventory Classification	Outer Diameter D (mm)	Figure	Length Under Neck (θ) (Degree)	Under Neck Diameter d1 (mm)	Actual Effective Length Depends on Work Inclination Angle 30' (mm)	Actual Effective Length Depends on Work Inclination Angle 1° (mm)	Actual Effective Length Depends on Work Inclination Angle 2° (mm)	Actual Effective Length Depends on Work Inclination Angle 3° (mm)
-	1		8 Arbeitstage	0.8	3	40	8 ～ 20	4	±0.005	Manufactured Product	1.6	3	-	1.55	-	-	-	-
-	1		8 Arbeitstage	0.9	3	40	8 ～ 20	4	±0.005	Manufactured Product	1.8	3	-	1.75	-	-	-	-
-	1		8 Arbeitstage	0.75	3	40	8 ～ 20	4	±0.005	Manufactured Product	1.5	3	-	1.45	-	-	-	-
-	1		8 Arbeitstage	1	3	40	8 ～ 21	4	±0.005	Manufactured Product	2	3	-	1.95	-	-	-	-
-	1		8 Arbeitstage	1.5	4	60	9 ～ 23	4	±0.005	Manufactured Product	3	3	-	2.9	-	-	-	-
-	1		8 Arbeitstage	1.25	3.5	40	9 ～ 22	4	±0.005	Manufactured Product	2.5	3	-	2.4	-	-	-	-
-	1		8 Arbeitstage	1.75	5	40	10 ～ 24	4	±0.005	Manufactured Product	3.5	3	-	3.3	-	-	-	-
-	1		8 Arbeitstage	2	6	50	11 ～ 28	6	±0.005	Manufactured Product	4	3	-	3.8	-	-	-	-
-	1		8 Arbeitstage	2.5	8	50	13 ～ 30	8	±0.005	Manufactured Product	5	3	-	3.8	-	-	-	-
51.25 €	1	Verfügbar	5 Arbeitstage	0.05	0.07	50	0.2	4	±0.005	Stocked Product	0.1	1	10°	0.085	0.2	0.21	0.23	0.26
49.33 €	1	Verfügbar	5 Arbeitstage	0.05	0.07	50	0.3	4	±0.005	Stocked Product	0.1	1	10°	0.085	0.31	0.32	0.35	0.39
53.17 €	1	Verfügbar	5 Arbeitstage	0.05	0.07	50	0.5	4	±0.005	Stocked Product	0.1	1	10°	0.085	0.52	0.54	0.59	0.65
50.51 €	1	Verfügbar	5 Arbeitstage	0.1	0.15	50	0.3	4	±0.005	Stocked Product	0.2	1	10°	0.18	0.31	0.32	0.35	0.39
47.90 €	1	Verfügbar	5 Arbeitstage	0.1	0.15	50	0.5	4	±0.005	Stocked Product	0.2	1	10°	0.18	0.52	0.54	0.59	0.65
45.57 €	1	Verfügbar	5 Arbeitstage	0.1	0.15	50	0.75	4	±0.005	Stocked Product	0.2	1	10°	0.18	0.78	0.81	0.88	0.98
45.84 €	1	Verfügbar	5 Arbeitstage	0.1	0.15	50	1	4	±0.005	Stocked Product	0.2	1	10°	0.18	1.04	1.08	1.18	1.3
60.32 €	1	Verfügbar	5 Arbeitstage	0.1	0.15	50	1	6	±0.005	Stocked Product	0.2	1	15°	0.18	1.04	1.08	1.18	1.31
43.65 €	1	Verfügbar	5 Arbeitstage	0.1	0.15	50	1.5	4	±0.005	Stocked Product	0.25	1	10°	0.18	1.56	1.62	1.77	1.95
59.38 €	1	Verfügbar	5 Arbeitstage	0.1	0.15	50	1.5	6	±0.005	Stocked Product	0.2	1	15°	0.18	1.56	1.62	1.77	1.97
50.30 €	1	Verfügbar	5 Arbeitstage	0.1	0.15	50	1.25	4	±0.005	Stocked Product	0.2	1	10°	0.18	1.3	1.35	1.47	1.64
53.37 €	1	Verfügbar	5 Arbeitstage	0.1	0.15	50	2	4	±0.005	Stocked Product	0.2	1	10°	0.18	2.08	2.16	2.36	2.59
69.81 €	1	Verfügbar	5 Arbeitstage	0.1	0.15	50	2	6	±0.005	Stocked Product	0.2	1	15°	0.18	2.08	2.16	2.36	2.63
54.13 €	1	Verfügbar	5 Arbeitstage	0.1	0.15	50	2.5	4	±0.005	Stocked Product	0.2	1	10°	0.18	2.6	2.71	2.95	3.24
61.80 €	1	Verfügbar	5 Arbeitstage	0.1	0.15	50	3	4	±0.005	Stocked Product	0.2	1	10°	0.18	3.12	3.25	3.54	3.89
36.03 €	1	Verfügbar	5 Arbeitstage	0.2	0.3	50	0.5	4	±0.005	Stocked Product	0.4	1	10°	0.37	0.52	0.54	0.59	0.65
31.04 €	1	Verfügbar	5 Arbeitstage	0.2	0.3	50	0.75	4	±0.005	Stocked Product	0.4	1	10°	0.37	0.78	0.81	0.88	0.98
26.63 €	1	Verfügbar	5 Arbeitstage	0.2	0.3	50	1	4	±0.005	Stocked Product	0.4	1	10°	0.37	1.04	1.08	1.18	1.3
41.01 €	1	Verfügbar	5 Arbeitstage	0.2	0.3	50	1	6	±0.005	Stocked Product	0.4	1	10°	0.37	1.04	1.08	1.18	1.31
27.39 €	1	Verfügbar	5 Arbeitstage	0.2	0.3	50	1.5	4	±0.005	Stocked Product	0.4	1	10°	0.37	1.56	1.62	1.77	1.95
39.86 €	1	Verfügbar	5 Arbeitstage	0.2	0.3	50	1.5	6	±0.005	Stocked Product	0.4	1	10°	0.37	1.56	1.62	1.77	1.97
27.00 €	1	Verfügbar	5 Arbeitstage	0.2	0.3	50	2	4	±0.005	Stocked Product	0.4	1	10°	0.37	2.08	2.16	2.36	2.59
43.05 €	1	Verfügbar	5 Arbeitstage	0.2	0.3	50	2	6	±0.005	Stocked Product	0.4	1	10°	0.37	2.08	2.16	2.36	2.63
30.76 €	1	Verfügbar	5 Arbeitstage	0.2	0.3	50	2.5	4	±0.005	Stocked Product	0.4	1	10°	0.37	2.6	2.71	2.95	3.24
28.66 €	1	Verfügbar	5 Arbeitstage	0.2	0.3	50	3	4	±0.005	Stocked Product	0.4	1	10°	0.37	3.12	3.25	3.54	3.89
45.57 €	1	Verfügbar	5 Arbeitstage	0.2	0.3	50	3	6	±0.005	Stocked Product	0.4	1	10°	0.37	3.12	3.24	3.55	3.94
32.13 €	1	Verfügbar	5 Arbeitstage	0.2	0.3	50	3.5	4	±0.005	Stocked Product	0.4	1	10°	0.37	3.64	3.79	4.14	4.6
30.78 €	1	Verfügbar	5 Arbeitstage	0.2	0.3	50	4	4	±0.005	Stocked Product	0.4	1	10°	0.37	4.16	4.33	4.72	5.19
50.30 €	1	Verfügbar	5 Arbeitstage	0.2	0.3	50	4	6	±0.005	Stocked Product	0.4	1	10°	0.37	4.16	4.33	4.73	5.26
38.34 €	1	Verfügbar	5 Arbeitstage	0.2	0.3	50	4.5	4	±0.005	Stocked Product	0.4	1	10°	0.37	4.68	4.87	5.32	5.91
36.08 €	1	Verfügbar	5 Arbeitstage	0.2	0.3	50	5	4	±0.005	Stocked Product	0.4	1	10°	0.37	5.2	5.41	5.9	6.49
37.60 €	1	Verfügbar	5 Arbeitstage	0.2	0.3	50	6	4	±0.005	Stocked Product	0.4	1	10°	0.37	6.24	6.49	7.1	7.89
25.08 €	1	Verfügbar	5 Arbeitstage	0.3	0.45	50	1	4	±0.005	Stocked Product	0.6	1	10°	0.56	1.04	1.08	1.18	1.31
26.40 €	1	Verfügbar	5 Arbeitstage	0.3	0.45	50	1.5	4	±0.005	Stocked Product	0.6	1	10°	0.56	1.56	1.62	1.77	1.97
37.95 €	1	Verfügbar	5 Arbeitstage	0.3	0.45	50	1.5	6	±0.005	Stocked Product	0.6	1	10°	0.56	1.56	1.62	1.77	1.97
20.92 €	1	Verfügbar	5 Arbeitstage	0.3	0.45	50	2	4	±0.005	Stocked Product	0.6	1	10°	0.56	2.08	2.16	2.36	2.59
30.97 €	1	Verfügbar	5 Arbeitstage	0.3	0.45	50	2	6	±0.005	Stocked Product	0.6	1	10°	0.56	2.08	2.16	2.36	2.63
25.89 €	1	Verfügbar	5 Arbeitstage	0.3	0.45	50	2.5	4	±0.005	Stocked Product	0.6	1	10°	0.56	2.6	2.7	2.95	3.28
37.60 €	1	Verfügbar	5 Arbeitstage	0.3	0.45	50	2.5	6	±0.005	Stocked Product	0.6	1	10°	0.56	2.6	2.7	2.95	3.28
23.99 €	1	Verfügbar	5 Arbeitstage	0.3	0.45	50	3	4	±0.005	Stocked Product	0.6	1	10°	0.56	3.12	3.25	3.54	3.89
28.45 €	1	Verfügbar	5 Arbeitstage	0.3	0.45	50	3	6	±0.005	Stocked Product	0.6	1	10°	0.56	3.12	3.24	3.55	3.94
25.89 €	1	Verfügbar	5 Arbeitstage	0.3	0.45	50	3.5	4	±0.005	Stocked Product	0.6	1	10°	0.56	3.64	3.79	4.14	4.6
20.92 €	1	Verfügbar	5 Arbeitstage	0.3	0.45	50	4	4	±0.005	Stocked Product	0.6	1	10°	0.56	4.16	4.33	4.72	5.19
34.57 €	1	Verfügbar	5 Arbeitstage	0.3	0.45	50	4	6	±0.005	Stocked Product	0.6	1	15°	0.56	4.16	4.33	4.73	5.26
27.02 €	1	Verfügbar	5 Arbeitstage	0.3	0.45	50	4.5	4	±0.005	Stocked Product	0.6	1	10°	0.56	4.68	4.87	5.32	5.91
23.72 €	1	Verfügbar	5 Arbeitstage	0.3	0.45	50	5	4	±0.005	Stocked Product	0.6	1	10°	0.56	5.2	5.41	5.9	6.49
31.46 €	1	Verfügbar	5 Arbeitstage	0.3	0.45	50	5	6	±0.005	Stocked Product	0.6	1	15°	0.56	5.2	5.41	5.91	6.57
19.96 €	1	Verfügbar	5 Arbeitstage	0.3	0.45	50	6	4	±0.005	Stocked Product	0.6	1	10°	0.56	6.24	6.49	7.08	7.78
30.78 €	1	Verfügbar	5 Arbeitstage	0.3	0.45	50	6	6	±0.005	Stocked Product	0.6	1	15°	0.56	6.24	6.49	7.1	7.89
36.84 €	1	Verfügbar	5 Arbeitstage	0.3	0.45	50	6.5	4	±0.005	Stocked Product	0.6	1	10°	0.56	6.76	7.04	7.69	8.54
26.61 €	1	Verfügbar	5 Arbeitstage	0.3	0.45	50	7	4	±0.005	Stocked Product	0.6	1	10°	0.56	7.28	7.57	8.26	9.08

1
2
3
4
5
Weiter >>

Spezifikationen

TSC series carbide long neck ball end mill, 2-flute / long neck model:Related Image
Model Number
TSC-BEM2LB (Stocked Product)

Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
0.05	0.2	-	4	0.07	0.085	50	10°	0.20	0.21	0.23	0.26	1
	0.3							0.31	0.32	0.35	0.39
	0.5							0.52	0.54	0.59	0.65
0.1	0.3	-	4	0.15	0.18	50	10°	0.31	0.32	0.35	0.39	1
	0.5	-	4				10°	0.52	0.54	0.59	0.65
	0.75	-	4				10°	0.78	0.81	0.88	0.98
	1	-	4				10°	1.04	1.08	1.18	1.30
	1	6	6				15°	1.04	1.08	1.18	1.31
	1.25	-	4				10°	1.30	1.35	1.47	1.64
	1.5	-	4				10°	1.56	1.62	1.77	1.95
	1.5	6	6				15°	1.56	1.62	1.77	1.97
	1.75	-	4				10°	1.82	1.89	2.07	2.30
	2	-	4				10°	2.08	2.16	2.36	2.59
	2	6	6				15°	2.08	2.16	2.36	2.63
	2.5	-	4				10°	2.60	2.71	2.95	3.24
	3	-	4				10°	3.12	3.25	3.54	3.89
0.15	0.5	-	4	0.2	0.28	50	10°	0.52	0.54	0.59	0.65	1
	0.6	-	4				10°	0.62	0.64	0.71	0.78
	0.75	-	4				10°	0.78	0.81	0.88	0.98
	1	-	4				10°	1.04	1.08	1.18	1.30
	1	6	6				15°	1.04	1.08	1.18	1.31
	1.25	-	4				10°	1.30	1.35	1.47	1.64
	1.5	-	4				10°	1.56	1.62	1.77	1.95
	2	-	4				10°	2.08	2.16	2.36	2.59
	2.25	-	4				10°	2.34	2.43	2.66	2.95
	2.5	-	4				10°	2.60	2.70	2.95	3.28
	2.75	-	4				10°	2.86	2.97	3.25	3.61
	3	-	4				10°	3.12	3.24	3.55	3.94	1
	3.5	-	4				10°	3.64	3.79	4.14	4.60
	4	-	4				10°	4.16	4.33	4.73	5.26
	4.5	-	4				10°	4.68	4.87	5.32	5.91
	5	-	4				10°	5.20	5.41	5.91	6.57

[ ! ]For shank diameter (d) specifications listed in blue, specify a tip (R), under neck length (ℓ1) and shank diameter (d).

Model Number
TSC-BEM2LB (Stocked Product)

Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
0.2	0.5	-	4	0.3	0.37	50	10°	0.52	0.54	0.59	0.65	1
	0.75	-	4				10°	0.78	0.81	0.88	0.98
	1	-	4				10°	1.04	1.08	1.18	1.30
	1	6	6				15°	1.04	1.08	1.18	1.31
	1.5	-	4				10°	1.56	1.62	1.77	1.95
	1.5	6	6				15°	1.56	1.62	1.77	1.97
	2	-	4				10°	2.08	2.16	2.36	2.59
	2	6	6				15°	2.08	2.16	2.36	2.63
	2.5	-	4				10°	2.60	2.71	2.95	3.24
	2.5	6	6				15°	2.60	2.70	2.95	3.28
	3	-	4				10°	3.12	3.25	3.54	3.89
	3	6	6				15°	3.12	3.24	3.55	3.94
	3.5	-	4				10°	3.64	3.79	4.14	4.60
	4	-	4				10°	4.16	4.33	4.72	5.19
	4	6	6				15°	4.16	4.33	4.73	5.26
	4.5	-	4				10°	4.68	4.87	5.32	5.91
	5	-	4				10°	5.20	5.41	5.90	6.49
	5.5	-	4				10°	5.72	5.95	6.51	7.23
	6	-	4				10°	6.24	6.49	7.10	7.89
	6	6	6				15°	6.24	6.49	7.10	7.89
0.25	1	-	4	0.35	0.46	50	10°	1.04	1.08	1.18	1.31	1
	1.5	-	4				10°	1.56	1.62	1.77	1.97
	1.5	6	6				15°	1.56	1.62	1.77	1.97
	2	-	4				10°	2.08	2.16	2.36	2.59
	2.5	-	4				10°	2.60	2.70	2.95	3.28
	2.5	6	6				15°	2.60	2.70	2.95	3.28
	3	-	4				10°	3.12	3.25	3.54	3.89
	3	6	6				15°	3.12	3.24	3.55	3.94
	3.5	-	4				10°	3.64	3.79	4.14	4.60
	4	-	4				10°	4.16	4.33	4.72	5.19
	4	6	6				15°	4.16	4.33	4.73	5.26
	4.5	-	4				10°	4.68	4.87	5.32	5.91
	5	-	4				10°	5.20	5.41	5.90	6.49
	5	6	6				15°	5.20	5.41	5.91	6.57
	5.5	-	4				10°	5.72	5.95	6.51	7.23
	6	-	4				10°	6.24	6.49	7.08	7.78
	6	6	6				15°	6.24	6.49	7.10	7.89
	7	-	4				10°	7.28	7.58	8.28	9.20
	8	-	4				10°	8.31	8.66	9.44	10.38
	8	6	6				15°	8.32	8.66	9.46	10.52
	9	-	4				10°	9.36	9.74	10.65	11.83
	10	-	4				10°	10.39	10.82	11.80	12.97
0.3	1	-	4	0.45	0.56	50	10°	1.04	1.08	1.18	1.31	1
	1.5	-	4				10°	1.56	1.62	1.77	1.97
	1.5	6	6				15°	1.56	1.62	1.77	1.97
	2	-	4				10°	2.08	2.16	2.36	2.59
	2	6	6				15°	2.08	2.16	2.36	2.63
	2.5	-	4				10°	2.60	2.70	2.95	3.28
	2.5	6	6				15°	2.60	2.70	2.95	3.28
	3	-	4				10°	3.12	3.25	3.54	3.89
	3	6	6				15°	3.12	3.24	3.55	3.94
	3.5	-	4				10°	3.64	3.79	4.14	4.60
	4	-	4				10°	4.16	4.33	4.72	5.19
	4	6	6				15°	4.16	4.33	4.73	5.26
	4.5	-	4				10°	4.68	4.87	5.32	5.91

[ ! ]For shank diameter (d) specifications listed in blue, specify a tip (R), under neck length (ℓ1) and shank diameter (d).

Model Number
TSC-BEM2LB (Stocked Product)

Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
0.3	5	-	4	0.45	0.56	50	10°	5.20	5.41	5.90	6.49	1
	5	6	6				15°	5.20	5.41	5.91	6.57
	5.5	-	4				10°	5.72	5.95	6.51	7.23
	6	-	4				10°	6.24	6.49	7.08	7.78
	6	6	6				15°	6.24	6.49	7.10	7.89
	6.5	-	4				10°	6.76	7.04	7.69	8.54
	7	-	4				10°	7.28	7.57	8.26	9.08
	7.5	-	4				10°	7.80	8.12	8.87	9.86
	8	-	4				10°	8.31	8.66	9.44	10.38
	8	6	6				15°	8.32	8.66	9.46	10.52
	8.5	-	4				10°	8.84	9.20	10.06	11.17
	9	-	4				10°	9.36	9.74	10.65	11.83
	9.5	-	4				10°	9.88	10.29	11.24	12.49
	10	-	4				10°	10.39	10.82	11.80	12.97
	10	6	6				15°	10.40	10.83	11.83	13.15
	11	-	4				10°	11.44	11.91	13.02	14.46
	12	-	4				10°	12.47	12.99	14.16	15.57
0.4	2	-	4	0.6	0.76	50	10°	2.08	2.16	2.36	2.59	1
	2	6	6				15°	2.08	2.16	2.36	2.63
	3	-	4				10°	3.12	3.24	3.55	3.94
	3	6	6				15°	3.12	3.24	3.55	3.94
	4	-	4				10°	4.16	4.33	4.72	5.19
	4	6	6				15°	4.16	4.33	4.73	5.26
	5	-	4				10°	5.20	5.41	5.90	6.49
	5	6	6				15°	5.20	5.41	5.91	6.57
	6	-	4				10°	6.24	6.49	7.08	7.78
	6	6	6				15°	6.24	6.49	7.10	7.89
	7	-	4				10°	7.28	7.57	8.26	9.08
	8	-	4				10°	8.31	8.66	9.44	10.38
	8	6	6				15°	8.32	8.66	9.46	10.52
	9	-	4				10°	9.36	9.74	10.65	11.83
	10	-	4				10°	10.39	10.82	11.80	12.97
	10	6	6				15°	10.40	10.83	11.83	13.15
	12	-	4				10°	12.48	12.99	14.20	15.78
0.5	2.5	-	4	0.75	0.95	50	10°	2.60	2.70	2.95	3.28	1
	3	-	4				10°	3.12	3.25	3.54	3.89
	3	6	6				15°	3.12	3.24	3.55	3.94
	4	-	4				10°	4.16	4.33	4.72	5.19
	4	6	6				15°	4.11	4.23	4.49	4.78
	5	-	4				10°	5.20	5.41	5.90	5.98
	5	6	6				15°	5.20	5.41	5.91	6.57
	6	-	4				10°	6.24	6.49	7.08	7.78
	6	6	6				15°	6.17	6.34	6.73	7.17
	7	-	4				10°	7.28	7.57	8.26	9.08
	7	6	6				15°	7.28	7.58	8.28	9.20
	8	-	4				10°	8.31	8.66	9.44	10.38
	8	6	6				15°	8.22	8.46	8.97	9.57
	9	-	4				10°	9.35	9.74	10.62	11.68
	10	-	4				10°	10.39	10.82	11.80	12.97
	10	6	6				15°	10.28	10.57	11.22	11.96
	12	-	4				10°	12.47	12.99	14.16	15.57
	12	6	6				15°	12.48	12.99	14.20	15.78
	14	-	4				10°	14.55	15.15	16.52	18.16
	14	6	6				15°	14.57	15.16	16.57	18.41
	16	-	4				10°	16.63	17.31	18.87	20.76
	16	6	6			70	15°	16.65	17.33	18.93	21.04
	18	-	4			70	10°	18.71	19.48	21.23	23.35

[ ! ]For shank diameter (d) specifications listed in blue, specify a tip (R), under neck length (ℓ1) and shank diameter (d).

Model Number
TSC-BEM2LB (Stocked Product)

Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
0.5	20	-	4	0.75	0.95	70	10°	20.79	21.64	23.59	25.95	1
	20	6	6				15°	20.81	21.66	23.67	26.30
	22	-	6				15°	22.89	23.83	26.04	28.93
0.6	4	-	4	0.9	1.15	50	10°	4.16	4.33	4.73	5.26	1
	6	-	4				10°	6.24	6.49	7.08	7.78
	6	6	6				15°	6.24	6.49	7.10	7.89
	8	-	4				10°	8.31	8.66	9.44	10.38
	8	6	6				15°	8.32	8.66	9.46	10.52
	10	-	4				10°	10.39	10.82	11.80	12.97
	10	6	6				15°	10.40	10.83	11.83	13.15
	12	-	4				10°	12.47	12.99	14.16	15.57
	14	-	4				10°	14.57	15.16	16.57	18.41
	16	-	4				10°	16.65	17.33	18.93	21.04
	16	6	6			70	15°	16.65	17.33	18.93	21.04
	18	-	4				10°	18.73	19.49	21.30	23.67
	20	-	4				10°	20.81	21.66	23.67	26.30
	24	-	4				10°	24.97	25.99	28.40	31.56
0.7	8	-	4	1	1.35	50	10°	8.31	8.66	9.44	10.38	1
	12						10°	12.47	12.99	14.16	15.57
	16						10°	16.63	17.31	18.87	20.76
0.75	3	-	4	1.1	1.45	50	10°	3.12	3.24	3.55	3.94	1
	4	-	4				10°	4.16	4.33	4.73	5.26
	6	-	4				10°	6.24	6.49	7.08	7.78
	6	6	6				15°	6.24	6.49	7.10	7.89
	8	-	4				10°	8.31	8.66	9.44	10.38
	8	6	6				15°	8.32	8.66	9.46	10.52
	10	-	4				10°	10.39	10.82	11.80	12.97
	10	6	6				15°	10.40	10.83	11.83	13.15
	12	-	4				10°	12.47	12.99	14.16	15.57
	12	6	6				15°	12.48	12.99	14.20	15.78
	14	-	4				10°	14.55	15.15	16.52	18.16
	16	-	4				10°	16.63	17.31	18.87	20.76
	16	6	6			70	15°	16.65	17.33	18.93	21.04
	18	-	4				10°	18.71	19.48	21.23	23.35
	20	-	4				10°	20.79	21.64	23.59	Without Interference
	20	6	6				15°	20.81	21.66	23.67	26.30
	22	-	4				10°	22.89	23.83	26.04	Without Interference
	30	-	4				10°	31.22	32.49	35.51	Without Interference
0.8	4	-	4	1.2	1.55	50	10°	4.16	4.33	4.73	Without Interference	1
	8							8.31	8.66	9.44	10.38
	12							12.47	12.99	14.16	15.57
	16							16.63	17.31	18.87	20.76
	20							20.79	21.64	23.59	Without Interference
0.9	8	-	4	1.3	1.75	50	10°	8.32	8.66	9.46	10.52	1
	12							12.48	12.99	14.20	15.78
	16							16.65	17.33	18.93	21.04
	20							20.81	21.66	23.67	Without Interference
1	3	-	4	1.5	1.95	50	10°	3.12	3.24	3.55	3.94	1
	4	-	4				10°	4.16	4.33	4.72	5.19
	4	6	6				15°	4.16	4.33	4.73	5.26
	6	-	4				10°	6.24	6.49	7.08	7.78
	6	6	6				15°	6.17	6.34	6.73	7.17
	8	-	4				10°	8.31	8.66	9.44	10.38
	8	6	6				15°	8.22	8.46	8.97	9.57
	10	-	4				10°	10.39	10.82	11.80	12.97
	10	6	6				15°	10.28	10.57	11.22	11.96

[ ! ]For shank diameter (d) specifications listed in blue, specify a tip (R), under neck length (ℓ1) and shank diameter (d).

Model Number
TSC-BEM2LB (Stocked Product)

Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
1	12	-	4	1.5	1.95	50	10°	12.47	12.99	14.16	15.57	1
	12	6	6				15°	12.33	12.69	13.46	14.35
	14	-	4				10°	14.55	15.15	16.52	18.16
	16	-	4				10°	16.63	17.31	18.87	Without Interference
	16	6	6			70	15°	16.65	17.33	18.93	21.04
	18	-	4				10°	18.71	19.48	21.23	Without Interference
	20	-	4				10°	20.79	21.64	23.59	Without Interference
	20	6	6				15°	20.81	21.66	23.67	26.30
	22	-	4				10°	22.87	23.81	25.95	Without Interference
	25	-	4				10°	25.98	27.05	29.49	Without Interference
	25	6	6			110	15°	26.02	27.08	29.59	32.87
	30	-	4			70	10°	31.18	32.46	Without Interference	Without Interference
	30	6	6			110	15°	31.22	32.49	35.51	Without Interference
	35	-	4				10°	36.38	37.87	Without Interference	Without Interference
	35	6	6				15°	36.42	37.91	41.42	Without Interference
	40	-	4				10°	41.57	43.28	Without Interference	Without Interference
	40	6	6				15°	41.63	43.32	47.34	Without Interference
	50	-	4				10°	51.97	54.11	Without Interference	Without Interference
1.25	8	-	4	2.3	2.4	50	10°	8.32	8.66	9.46	10.52	1
	10							10.40	10.83	11.83	13.15
	15							15.61	16.24	17.75	Without Interference
	20					70		20.81	21.66	Without Interference	Without Interference
	25							26.02	27.08	Without Interference	Without Interference
	30							31.22	32.49	Without Interference	Without Interference
	35							36.42	37.91	Without Interference	Without Interference
1.5	6	3	3	2.4	2.9	50	-	6.24	6.49	7.10	7.89	1
	6	4	4				10°	6.24	6.49	7.10	7.89
	6	-	6					6.24	6.49	7.10	7.89
	8	-	6					8.31	8.66	9.44	10.38
	10	-	6					10.39	10.82	11.80	12.97
	12	-	6					12.47	12.99	14.16	15.57
	14	-	6					14.57	15.16	17.75	18.41
	15	-	6					15.61	16.24	23.67	19.72
	16	-	6			70		16.63	17.31	18.87	20.76
	20	-	6					20.79	21.64	23.59	25.95
	25	-	6					25.98	27.05	29.49	Without Interference
	30	-	6					31.18	32.46	35.39	Without Interference
	35	-	6			110		36.38	37.87	41.29	Without Interference
	40	-	6					41.57	43.28	Without Interference	Without Interference
	50	-	6					51.97	54.11	Without Interference	Without Interference
1.75	10	-	6	2.8	3.35	50	10°	10.40	10.83	11.83	13.15	1
	15					70		15.61	16.24	17.75	19.72
	20							20.81	21.66	23.67	Without Interference
	25							26.02	27.08	29.59	Without Interference
	30							31.22	32.49	Without Interference	Without Interference
	35					110		36.42	37.91	Without Interference	Without Interference
	45					110		46.83	48.74	Without Interference	Without Interference
2	8	4	4	3	3.85	50	-	Without Interference	Without Interference	Without Interference	Without Interference	1
	8	-	6				10°	8.33	8.70	9.59	10.38
	10	-	6					10.39	10.82	11.80	12.97
	12	-	6					12.47	12.99	14.16	15.57
	14	-	6					16.65	17.33	18.93	Without Interference
	15	-	6					15.61	16.24	17.75	Without Interference
	16	-	6					16.63	17.31	18.87	Without Interference
	20	-	6			70		20.79	21.64	23.59	Without Interference
	25	-	6					25.98	27.05	29.49	Without Interference
	30	-	6					31.18	32.46	Without Interference	Without Interference
	35	-	6			110		36.38	37.87	Without Interference	Without Interference
	40	-	6					41.57	43.28	Without Interference	Without Interference
	45	-	6					46.77	48.70	Without Interference	Without Interference

[ ! ]For shank diameter (d) specifications listed in blue, specify a tip (R), under neck length (ℓ1) and shank diameter (d).

For Cutting Conditions, Refer to >>Click here.

Model Number
TSC-BEM2LB (Stocked Product)

Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
2	50	-	6	3	3.85	110	10°	51.97	54.11	Without Interference	Without Interference	1
2	60	-	6	3	3.85	110	10°	62.36	Without Interference	Without Interference	Without Interference	1
2.5	10	-	6	5	4.85	70	10°	10.40	10.82	11.80	Without Interference	1
	15							15.61	16.24	Without Interference	Without Interference
	20							20.81	21.66	Without Interference	Without Interference
	25							26.02	27.08	Without Interference	Without Interference
	30							31.22	Without Interference	Without Interference	Without Interference
	35					110		36.42	Without Interference	Without Interference	Without Interference
	40							41.63	Without Interference	Without Interference	Without Interference
	45							46.83	Without Interference	Without Interference	Without Interference
	50							52.04	Without Interference	Without Interference	Without Interference
3	10	-	6	6	5.85	70	-	Without Interference	Without Interference	Without Interference	Without Interference	2
	20						-	Without Interference	Without Interference	Without Interference	Without Interference
	25						-	Without Interference	Without Interference	Without Interference	Without Interference
	30						-	Without Interference	Without Interference	Without Interference	Without Interference
	35					110	-	Without Interference	Without Interference	Without Interference	Without Interference
	40						-	Without Interference	Without Interference	Without Interference	Without Interference
	45						-	Without Interference	Without Interference	Without Interference	Without Interference
	50						-	Without Interference	Without Interference	Without Interference	Without Interference
	60						-	Without Interference	Without Interference	Without Interference	Without Interference

[ ! ]For shank diameter (d) specifications listed in blue, specify a tip (R), under neck length (ℓ1) and shank diameter (d).

Model Number
LN-TSC-BEM2S (Manufactured Product)

Tip R	Length Under Neck ℓ1 1 mm Increment Designation	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Figure
0.75	8 ~ 20	4	3	1.45	40	3
0.8	8 ~ 20	4	3	1.55	40	3
0.9	8 ~ 20	4	3	1.75	40	3
1	8 ~ 21	4	3	1.95	40	3
1.25	9 ~ 22	4	3.5	2.4	40	3
1.5	9 ~ 23	4	4	2.9	40	3
1.5	9 ~ 36	4	4	2.9	60	3
1.75	10 ~ 24	4	5	3.3	40	3
2	11 ~ 28	6	6	3.8	50	3
2.5	13 ~ 30	8	8	4.8	50	3

[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number

For Cutting Conditions, Refer to >>Click here.

Weitere Informationen

TSC series carbide long neck ball end mill, 2-flute / long neck model:Related Image

Grundlegende Informationen

Model	Long Neck Bore	Work Material	General Steel / Heat-Treated Steel / Edelstahl / Gusseisen / Aluminium / Kupfer	Number of Flutes(sheet)	2
Coating	For High Hardness (Silicone-Based)	Processing Applications	Curved Surface / Side Surface / Carving / R-Groove	Torsion Availability	Included

Konfigurieren

270Vorgeschlagene Teilenummer

Teilenummern anzeigen

Einige Spezifikationen sind bisher nicht festgelegt.

Die Teilenummer wurde erkannt.

Basiseigenschaften

R Size(mm)
0.05

0.1

0.15

0.2

0.25

0.3

0.4

0.5

0.6

0.7

0.75

0.8

0.9

1

1.25

1.5

1.75

2

2.5

3
Zurücksetzen
Flute Length (ℓ)(mm)
0.07

0.15

0.2

0.3

0.35

0.45

0.6

0.75

0.9

1

1.1

1.2

1.3

1.5

2.3

2.4

2.8

3

3.5

4

5

6

8
Zurücksetzen
Overall Length (L)(mm)
40

50

60

70

110
Zurücksetzen
Length Under Neck (ℓ1)(mm)
0.2

0.3

0.5

0.6

0.75

1

1.25

1.5

2

2.5

3

3.5

4

4.5

5

6

6.5

7

7.5

8

9

10

11

12

14

15

16

18

20

22

24

25

30

35

40

45

50

60
[8-30/1mmTeile]
Zurücksetzen
Shank Diameter (d)(mm)
3

4

6

8
Zurücksetzen
R Precision(μm)
-0.007 ~ +0.003

±0.005
Zurücksetzen
Inventory Classification
- Manufactured Product
- Stocked Product
Zurücksetzen
Ausführung
- LN-TSC-BEM2S
- TSC-BEM2LB
Zurücksetzen