• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Aluminum- / Kunststoffkasten

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • 12 Tage oder weniger
  • 16 Tage oder weniger
  • 19 Tage oder weniger
  • 22 Tage oder weniger
  • 32 Tage oder weniger
  • Breaker Box

    Breaker Box

    MIRAI INDUSTRY

    [Features] - Box for compact size; ideal for power supplies in vending machines and the like.

    ab
    6.72€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Waterproof Square Pull Box (With Cover / Without Knock)

    Waterproof Square Pull Box (With Cover / Without Knock)

    MIRAI INDUSTRY

    [Features] - Waterproof. - Square.

    ab
    21.25€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wall Box, Without Roof (Vertical Type)

    Wall Box, Without Roof (Vertical Type)

    MIRAI INDUSTRY

    [Features] - Excellent weather and impact resistance, rain-proof structure plastic box.

    ab
    9.81€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Electricity Meter Box

    Electricity Meter Box

    MIRAI INDUSTRY

    Decorative box that can be mounted on a pole band. [Features] - Installs neatly! Electricity meter box for concealed wiring. - Stylish 2-tone color finish. - Rainproof type that prevents entry of rainwater and insects.

    ab
    62.17€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Square Pull Box (Without Knock)

    Square Pull Box (Without Knock)

    MIRAI INDUSTRY

    [Features] - Excellent weather and impact resistance, resin box.

    ab
    10.29€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wall Box, Without Roof (Horizontal Type)

    Wall Box, Without Roof (Horizontal Type)

    MIRAI INDUSTRY

    [Features] - Excellent weather and impact resistance, rain-proof structure plastic box.

    ab
    26.55€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wall Box (Horizontal Type), With Wooden Board Base

    Wall Box (Horizontal Type), With Wooden Board Base

    MIRAI INDUSTRY

    [Features] - All box organizes poles for storage. (With hole for band). - Door can be separated from main body. - We also take orders for doors only.

    ab
    35.04€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Octagonal Concrete Box (Deep II Type)

    Octagonal Concrete Box (Deep II Type)

    MIRAI INDUSTRY

    Resin box with lid that can be removed simply by loosening screws. [Features] - JIS type (excluding spacing covers). - The lid can be removed simply by loosening screws. - Spacing cover (one touch type) compatible product. - Knockout can be opened using a screwdriver. - Environmentally friendly EM type.

    ab
    5.95€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Embedded Square Outlet Box

    Embedded Square Outlet Box

    MIRAI INDUSTRY

    [Features] - Prevents box tilting. Has convenient 4 mm bar mounting hole (no screw fastening required). - With studs. - When using studs, use by removing the knock-out at the back of the box. - Part for painted cover (one-touch type).

    ab
    3.37€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Aluminum Mobile Case AMA Series

    Aluminum Mobile Case AMA Series

    SETTSU METAL INDUSTRIAL

    A beautiful, luxurious lightweight and high-strength aluminum case for electronic equipment [Features] - By opening and closing the corner frame, it is possible to remove the upper panel in the upward direction; internal maintenance is easy. - The upper panel is easy to process because it is an inset flat plate. - Front panel unit is also easy to process because it is flat plate - We offer PCB board insertion groove the size of which is tailored to DIN standard board (width 100 mm) euro card size single (width 100 mm × depth 160 mm). - Portable or wall-mounted types are available. - It is possible to order special made products with a different depth dimension size. - When the the portable/table top is used, it is suited for use purposes such as office equipment, communication equipment, monitoring equipment, medical and research equipment, health equipment and measurement - control equipment. - When it is used on the wall it can be used in data collection terminals, entry management - storage management, computer and data systems of peripheral equipment, measurement and control systems, medical - research, and other electronics-related fields.

    ab
    54.04€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wall Box, With Roof (Horizontal Type)

    Wall Box, With Roof (Horizontal Type)

    MIRAI INDUSTRY

    Plastic box with rain-proof structure and excellent weather and impact resistance. [Features] - Roof doors can be disconnected from the body (Except for WB-5AJ). - You can also order the roof doors only. - The roof can also be attached or detached from the top of the body (Except for models WB-4AL, 5A). - It is possible to attach or detach the roof after construction. - A wooden panel can be attached or detached from the front face (Except for models WB-4AL, 5A).

    ab
    30.98€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wall Box, With Roof (Vertical Type)

    Wall Box, With Roof (Vertical Type)

    MIRAI INDUSTRY

    Plastic box with rain-proof structure and excellent weather and impact resistance. [Features] - Roof doors can be disconnected from the body (Except for WB-5AJ). - You can also order the roof doors only. - The roof can also be attached or detached from the top of the body (Except for models WB-4AL, 5A). - It is possible to attach or detach the roof after construction. - A wooden panel can be attached or detached from the front face (Except for models WB-4AL, 5A).

    ab
    12.10€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wall Box (Vertical Type), With Wooden Board Base

    Wall Box (Vertical Type), With Wooden Board Base

    MIRAI INDUSTRY

    Wall box that can be neatly attached to a pole. Door can be removed from unit. [Features] - Wall box that can be neatly attached to a pole (with hole for band). - Door can be separated from main body. - We also take orders for doors only.

    ab
    19.45€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Rectangular Pull Box (Without Knock)

    Rectangular Pull Box (Without Knock)

    MIRAI INDUSTRY

    [Features] - Excellent weather and impact resistance, resin box.

    ab
    17.59€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wall Box (Vertical Type), Plastic Base

    Wall Box (Vertical Type), Plastic Base

    MIRAI INDUSTRY

    Made of plastic, lightweight, no need to to make a ground connection. Rain-protective structure with excellent shock resistance and weather resistance. [Features] - Made of plastic, lightweight, no need to to make a ground connection. - Rain-protective structure with excellent shock resistance and weather resistance. - The vertical opening type has an opening at the bottom, so cord can be pulled while the lid is closed. - The reverse of the base has through holes so band fixing to poles, etc., is easy (please see reference to check for through holes).

    ab
    7.57€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Robust Box VCA Series

    Robust Box VCA Series

    SETTSU METAL INDUSTRIAL

    [Features] - A strong double structure waterproof, dust proof box that is suitable for various purposes. - An abundance of size variations. - Those made of ABS are for ordinary applications while those made of polycarbonate are for high temperature and harsh environments and boast of high strength. - With the built-in already-sealed packing, the high degree of IP66 protection class waterproof and dustproof performance has been achieved. - Since the assembly screws are placed outside the sealed packing, the waterproof properties are not lost. - In addition, the screws, which have excellent corrosion resistance, are screwed into the lower cover tapping holes as they are. - Tapping holes for inserting the assembly screws are provided in both convex type covers and concave type covers. - A reversible structure with which even if the convex or concave cover is used inverted, the appearance does not change. - For the cover strip, in addition to the standard accessory light gray item (without hole and with hole), five colors are available as an option.

    ab
    30.15€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wall Box (Horizontal Type), Plastic Rain-proof Switch Box

    Wall Box (Horizontal Type), Plastic Rain-proof Switch Box

    MIRAI INDUSTRY

    Plastic box with rain-proof structure and excellent weather and impact resistance. [Features] - Locking WB-4J5J lid. - Roof doors can be disconnected from the body (Except for WB-4J5J). - You can also order the doors only.

    ab
    29.32€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Aluminum Mobile Case AMB Series

    Aluminum Mobile Case AMB Series

    SETTSU METAL INDUSTRIAL

    A beautiful, luxurious lightweight and high-strength aluminum case for electronic equipment [Features] - The main body is aluminum extrusion, and a front panel made of resin is available. - By opening and closing the corner frame, it is possible to remove the upper panel in the upward direction making internal maintenance easy. - The upper panel is easy to process because it is an inset flat plate. - In the resin front panel portion there is a recessed portion of 1.0 mm in depth for a membrane sheet - We offer PCB board insertion groove the size of which is tailored to DIN standard board (width 100 mm) euro card size single (width 100 mm × depth 160 mm). - Portable or wall-mounted types are available. - It is possible to order special made products with a different depth dimension size. - When used as a portable/table top device, it is suited for use purposes such as office equipment, communication equipment, monitoring equipment, medical and research equipment, health equipment and measurement - control equipment. - When it is used on the wall it can be used in data collection terminals, entry management - storage management, computer and data systems of peripheral equipment, measurement and control systems, medical - research, and other electronics-related fields.

    ab
    40.16€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Plastic Case JM Series

    Plastic Case JM Series

    SETTSU METAL INDUSTRIAL

    Simple structure plastic case for standard panel-mounted electronic devices. [Features] - Plastic case for portable/desktop electronic devices. - Pocket sized, so conveniently portable, can easily be stored in drawer or attache chase. - Panel mounted, with simple internal construction. - As the panel is a flat plate, machining is easy. - The board is also secured by screws at up/down cover assembly part. - There are grooves on the inside for mounting the board vertically. - Various wrist straps, convenient for portability, are available as separate accessories.

    ab
    16.17€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Flat Pack Case GB Series

    Flat Pack Case GB Series

    SETTSU METAL INDUSTRIAL

    Plastic case for standard electronic devices used continuously for many years [Features] - The thin flat shape of the lower cover makes for easy access from the front and back surface, making installation and maintenance of parts easy. - Among similarly shaped models, is the GA series with a different height. - Can be used for a wide variety of computer peripheral equipment, such as a monitor for checking, signal generation equipment or control system, or for medical treatment and research.

    ab
    18.28€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Motech VAA Series

    Motech VAA Series

    SETTSU METAL INDUSTRIAL

    Modern, fashionable design plastic case for electronic devices. [Features] - Motec is a plastic case for portable/desktop electronic devices. - A lineup of easy to use sizes. - Types with sloping front panels, where the sloping face makes reading and operation more comfortable, are suggested as unique desktop cases. - The top/bottom cover is an insert type that needs no screws, reducing the time and cost needed for assembly. - the up/down cover lock can be released from the side with a small flat headed screwdriver. - Modern fashionable design. - The internal groove can be used for the vertical mounting of boards or the insertion of partitions. - Slope panel (inclined panel) can be used as an easy to use operation face. - The concave control face of the slope panel protects the membrane sheet. - Transparent rubber foot (stick-on type) has an anti-slip function for desktop cases. - For a wide range of uses such as for measurement/control feedback, interfaces/switchboxes/modems, medical/research fields etc.

    ab
    27.57€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • PVK Box

    PVK Box

    MIRAI INDUSTRY

    [Features] - Partition mounted inside box.

    ab
    5.57€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Plastic Case HP Series

    Plastic Case HP Series

    SETTSU METAL INDUSTRIAL

    Simple structure plastic case for electronic devices. [Features] - Plastic case for portable/desktop electronic devices. - Pocket sized, so conveniently portable, can easily be stored in drawer or attache chase. - The HPK series does not have a battery box, whereas the HP series does. - With the HPK series, the board is also secured by the up/down cover assembly part. - The control surface of the upper cover is indented and protected by a membrane sheet. - Various wrist straps and belt grips, convenient for portability are available as separate purchases.

    ab
    20.71€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Plastic Case HMK Series

    Plastic Case HMK Series

    SETTSU METAL INDUSTRIAL

    [Features] - Plastic case for portable or desktop electronic devices. - Convenient for carrying because it is pocket-size; easily stores in drawers or attache cases. - The HMK series has no battery box; HM series has a battery box. - With front panel; simple internal structure. - Panel is flat so processing is easy. - Top/bottom cover assembly; PCB fastened by screws. - Internally, has groove for directly mounting PCB. - Convenient for carrying as a separately sold accessory; wrist strap and belt clip are available.

    ab
    15.47€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Octagonal Concrete Box (With Coating Cover)

    Octagonal Concrete Box (With Coating Cover)

    MIRAI INDUSTRY

    Resin box with lid that can be removed simply by loosening screws. [Features] - With coated cover. - JIS type (excluding spacing covers). - The lid can be removed simply by loosening screws. - Spacing cover (one touch type) compatible product. - Knockout can be opened using a screwdriver. - Environmentally friendly EM type.

    ab
    5.95€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Aluminum Mobile Case AMC Series

    Aluminum Mobile Case AMC Series

    SETTSU METAL INDUSTRIAL

    A beautiful, luxurious lightweight and high-strength aluminum case for electronic equipment [Features] - The main body is aluminum extrusion, and a mount angle type front panel is available. - By opening and closing the corner frame, it is possible to remove the upper panel in the upward direction making internal maintenance easy. - The upper panel is easy to process because it is an inset flat plate. - We offer PCB board insertion groove the size of which is tailored to DIN standard board (width 100 mm) euro card size single (width 100 mm × depth 160 mm). - Portable or wall-mounted types are available. - It is possible to order special made products with a different depth dimension size. - When used as a portable/table top device, it is suited for use purposes such as office equipment, communication equipment, monitoring equipment, medical and research equipment, health equipment and measurement - control equipment. - When it is used on the wall it can be used in data collection terminals, entry management - storage management, computer and data systems of peripheral equipment, measurement and control systems, medical - research, and other electronics-related fields.

    ab
    45.60€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Graded Aluminum Case ASC Series

    Graded Aluminum Case ASC Series

    SETTSU METAL INDUSTRIAL

    Aluminum case of excellent design and functionality used for dual sided inclining type electronic devices. [Features] - Desktop type aluminum case for electronic equipment that can be used for a wide range of purposes. - Because of the inclination design it has good control and appearance. - It has both good design and functionality. - The upper surface of the case is easy for hole processing because it uses a flat shaped aluminum panel. - On the rear side there is a flat surface section very suitable for attaching USB and other connectors. The parts are divided up for easy processing. - With special specifications it is possible to adjust the size of the orientation of the width. - By attaching an optional battery compartment (GGBC series) up to five dry batteries of three types can be used. - There are a wide variety of uses including data collection, broadcasting systems, entrance and security management, medical field, research fields, machinery control at factories and sales management.

    ab
    91.09€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Shell Type Case GN Series

    Shell Type Case GN Series

    SETTSU METAL INDUSTRIAL

    Simple standard plastic cases for electronic devices that you can choose from many types and abundant sizes [Features] - Simple and basic, it is a plastic case for shell type electronic equipment. - The structure of concave and convex shapes achieves a strong and tight mating. - The front and rear surfaces of the case are processed flat plate configuration aluminum panel specification. - Inside, there is a groove for mounting the board vertically. - Boss for the substrate mounting are provided on the upper and lower covers. - In the same type model, these is GO type series with a battery box, and the GP series type with front and back panels. - As a peripheral device for a wide rage of uses such as for measurement and control, medical and research, interface, switch box, and modem.

    ab
    27.57€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Flat Pack Case GA Series

    Flat Pack Case GA Series

    SETTSU METAL INDUSTRIAL

    Plastic case for standard electronic devices used continuously for many years [Features] - The thin flat shape of the lower cover makes for easy access from the front and back surface, making installation and maintenance of parts easy. - Among similarly shaped models, is the GB series with a different height. - Can be used for a wide variety of computer peripheral equipment, such as a monitor for checking, signal generation equipment or control system, or for medical treatment and research.

    ab
    16.99€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Shell Type Case GL Series

    Shell Type Case GL Series

    SETTSU METAL INDUSTRIAL

    Simple standard plastic cases for electronic devices that you can choose from many types and abundant sizes [Features] - Simple and basic, it is a plastic case for shell type electronic equipment. - The structure of concave and convex shapes achieves a strong and tight mating. - Inside, there is a groove for mounting the board vertically. - Boss for the substrate mounting are provided on the upper and lower covers. - If you use the accessory sealing kit, it conforms to protection class IP65. - In the same type model, these is the GM series with a battery box. - As a peripheral device for a wide rage of uses such as for measurement and control, medical and research, interface, switch box, and modem.

    ab
    20.56€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Plastic Case HPLK Series

    Plastic Case HPLK Series

    SETTSU METAL INDUSTRIAL

    Simple structure plastic case for electronic devices [Features] - Plastic case for portable/desktop electronic devices. - Pocket sized, so conveniently portable, can easily be stored in drawer or attache chase. - The HPLK series does not have a battery box, whereas the HPL series does. - With the HPLK series, the board is also secured by the up/down cover assembly part. - The control surface of the upper cover is indented and protected by a membrane sheet. - Various wrist straps and belt grips, convenient for portability are available as separate purchases.

    ab
    23.57€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Sprint IT-ST Series

    Sprint IT-ST Series

    SETTSU METAL INDUSTRIAL

    A handy sized plastic case for portable electronic devices. [Features] - Modern design plastic case for electronic devices. - Handy size for easy portability. - Choose between the sealed type or the card reader type. - It can be used for remote controls, card reading terminals, data collection terminals, etc.

    ab
    16.99€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Tech Net IT-TN Series

    Tech Net IT-TN Series

    SETTSU METAL INDUSTRIAL

    Plastic case for portable electronic devices that uses elastic material in both sides. [Features] - Plastic case for portable electronic devices. - Using TPU material (synthetic rubber) in both sides, fits well into the hand with a good feel. - Equipped with operability and functionality due to its ergonomic design. - Produced using a new molding technology that uses a combination of 2 materials, ABS resin and TPU (synthetic rubber). - Choose from type without battery box or type with battery box that can house AA and 9V batteries. - It can be used for remote controls, measuring instruments, communication equipment, information collection terminals, various types of research and medical equipment.

    ab
    30.58€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Witech IT-WK Series

    Witech IT-WK Series

    SETTSU METAL INDUSTRIAL

    [Features] - Plastic case for compact electronic devices. - Component integrated with ABS resin and TPU (synthetic rubber). - Case top and bottom faces are made from TPU; does not slip on desk tops; gives a comfortable and soft fit to the hand. - Press-fitted type. Simple and easy to use structure. - Boss for mounting PCB; disposed at bottom cover. - Dedicated accessory intermediate ring (IT-RWK series) protects the inside from water and dirt. Seven color varieties give this an individual feel.

    ab
    16.84€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Plastic Case 9V Type Battery Type HM Series

    Plastic Case 9V Type Battery Type HM Series

    SETTSU METAL INDUSTRIAL

    [Features] - Plastic case for portable or desktop electronic devices. - Convenient for carrying because it is pocket-size; easily stores in drawers or attache cases. - The HMK series has no battery box; HM series has a battery box. - With front panel; simple internal structure. - Panel is flat so processing is easy. - Top/bottom cover assembly; PCB fastened by screws. - Internally, has groove for directly mounting PCB. - Convenient for carrying as a separately sold accessory; wrist strap and belt clip are available.

    ab
    16.73€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Shell Type Case GO Series

    Shell Type Case GO Series

    SETTSU METAL INDUSTRIAL

    Simple standard plastic cases for electronic devices that you can choose from many types and abundant sizes [Features] - Simple and basic, it is a plastic case for shell type electronic equipment. - The structure of concave and convex shapes achieves a strong and tight mating. - The front and rear surfaces of the case are processed flat plate configuration aluminum panel specification. - Inside, there is a groove for mounting the board vertically. - Boss for the substrate mounting are provided on the upper and lower covers. - It comes with a battery box. - In the same type model, these is the front panel type GN series, and the GP series type with front and back panels. - As a peripheral device for a wide rage of uses such as for measurement and control, medical and research, interface, switch box, and modem.

    ab
    28.58€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Shell Type Case GP Series

    Shell Type Case GP Series

    SETTSU METAL INDUSTRIAL

    Simple standard plastic cases for electronic devices that you can choose from many types and abundant sizes [Features] - Simple and basic, it is a plastic case for shell type electronic equipment. - It is a plastic case for shell type electronic equipment. - The structure of concave and convex shapes achieves a strong and tight mating. - The front and rear surfaces of the case are processed flat plate configuration aluminum panel specification. - Inside, there is a groove for mounting the board vertically. - Boss for the substrate mounting are provided on the upper and lower covers. - In the same type model, these is the front panel type GN series, and the GO series type with a front panel battery box. - As a peripheral device for a wide rage of uses such as for measurement and control, medical and research, interface, switch box, and modem.

    ab
    32.15€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Plastic Case HPK Series

    Plastic Case HPK Series

    SETTSU METAL INDUSTRIAL

    Simple structure plastic case for electronic devices [Features] - Plastic case for portable/desktop electronic devices. - Pocket sized, so conveniently portable, can easily be stored in drawer or attache chase. - The HPK series does not have a battery box, whereas the HP series does. - With the HPK series, the board is also secured by the up/down cover assembly part. - The control surface of the upper cover is indented and protected by a membrane sheet. - Various wrist straps and belt grips, convenient for portability are available as separate purchases.

    ab
    18.98€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Plastic Case HPL Series

    Plastic Case HPL Series

    SETTSU METAL INDUSTRIAL

    Simple structure plastic case for electronic devices. [Features] - Plastic case for portable/desktop electronic devices. - Pocket sized, so conveniently portable, can easily be stored in drawer or attache chase. - The HPLK series does not have a battery box, whereas the HPL series does. - With the HPLK series, the board is also secured by the up/down cover assembly part. - The control surface of the upper cover is indented and protected by a membrane sheet. - Various wrist straps and belt grips, convenient for portability are available as separate purchases.

    ab
    25.43€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Plastic Case LH Series

    Plastic Case LH Series

    SETTSU METAL INDUSTRIAL

    Simple structure plastic case for standard panel-mounted electronic devices. [Features] - Plastic case for portable/desktop electronic devices. - Pocket sized, so conveniently portable, can easily be stored in drawer or attache chase. - Panel mounted, with simple internal construction. - The panel is colored black, and as it is a flat plate, machining is easy. - There are grooves on the inside for mounting the board vertically. - Various wrist straps, convenient for portability, are available as separate accessories.

    ab
    36.16€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Plastic Case OD Series

    Plastic Case OD Series

    SETTSU METAL INDUSTRIAL

    Durable and inexpensive waterproof and dustproof type box for electronic devices [Features] - The OD series is a waterproof and dustproof plastic case suitable for electronic devices and can be hung on the wall or placed on a tabletop. - It is made of of polycarbonate UL94V-2 compliant material and when combined with the sealing rubber accessory it obtains protection class IP65 equivalent high waterproof and dustproof performance. - The OD models have a mount portion and can be screwed to the wall. - The ODNF model is the table-top type. - The maintenance of the ODTM model is easy because the assembly screw is on the top face and you only have to remove the top cover while it is still the wall surface or the like in order to do maintenance. - Use purposes include for the electrical control of heating, ventilation, machine control and construction machinery among other, as well as use in electronic fields such as for an outdoor wireless system, push-button switch, wall mount controller, security systems, etc.

    ab
    35.59€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Unitech VS Series

    Unitech VS Series

    SETTSU METAL INDUSTRIAL

    A plastic case for electronic devices designed to be able to operate from two directions and read display portion [Features] - The Unitech VSS/VSM series utilizes a "opposite-facing" concept for it's design, using a panel that operates from two directions and read LCD screens, among other things. - Assuming on-site use at medical facilities, it provides an ideally tilted angle for when the machine is being used as doctors and patients face each other during examinations. - It has a modern appearance, and can be used on tabletops or hung on walls. - Ergonomic designs were used to make operating the panel and reading the display easy, thereby making it user-friendly. - For the operating surface of the front cover and top cover, a concave surface with a depth of 1.4 mm for the membrane sheet and 0.6 mm for the digital print is provided. - The the print sheet covering both sides of the front cover and top cover allows for the printing of such things as logos, becoming a case full of creativity (suitable for top cover and front cover with a concavity of 0.6 mm). - A print wiring board can be mounted onto each cover. Each operating surface is created at their appropriate angles (18°/72°), making them suitable for communication in two directions. - "Battery box" and "no battery" options available. - It's suited for uses with, telecommunications, the medical field, research, factories, and other places with data storage devices, as well as for input information terminals and measurement/control systems.

    ab
    48.32€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carrytech VUA Series

    Carrytech VUA Series

    SETTSU METAL INDUSTRIAL

    [Features] - Plastic case for portable electronic devices with briefcase handle; easy to carry. - Broader possibilities for new usages and applications by disposing a handle on the case. - Handle is positioning on the line of the center of case gravity; provides operability with excellent ergonomic design; balanced product design. - Handle pad uses soft TPE material (elastomer). Attains a comfortable grip and slip-prevention effects. - Side face of back surface of case has a recess to make it easy to hold with operating by hand.

    ab
    66.77€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Net Box VWA Series

    Net Box VWA Series

    SETTSU METAL INDUSTRIAL

    It is a plastic case that can be used for electric devices that can be used as control units and it harmonizes with the surrounding space [Features] - It is a control unit that harmonizes with the surrounding space. - It is a plastic case for electronic equipment that can be used for control unit of various applications. It has a sophisticated appearance that seamlessly harmonizes with the surrounding space of a modern building. - The outlet plug/connector junction and screws for assembly are hidden in the trim, and the simple outer appearance of just the case and cable enhances the aesthetics. - Under the cover an abundant amount of space has been secured for embedding a small display and connectors. - The cover on which a smooth arc is drawn gives the information providing unit of the LED signals and the like a design that retains harmony. - The optional sealing kit sold separately offers dust-proof and drip-proof performance that meets that meets IP65 protection grade criteria and is made with materials excellent in durability so you can also take advantage of the unit as an outdoor terminal box. - The use purposes include management terminals - access control panels, personal computer peripherals, measurement - operation equipment, monitoring - recording equipment, cases for medical equipment, etc.

    ab
    47.60€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Smart Box VQA Series

    Smart Box VQA Series

    SETTSU METAL INDUSTRIAL

    Waterproof and dustproof box for plastic electronics with a rounded smart appearance [Features] - Smart rounded shape gives it an artistic appearance. - With the built-in already-sealed packing in the upper cover, we realized waterproof and dustproof performance of the degree of protection IP65 (66). - UL94V-0 compliant flame-retardant ABS is used. - Trim on the left and right hides the screw so it cannot be seen. - It comes with a retention set for preventing the the upper cover from falling off. - Operation surface has a concave structure that protects the membrane switch (1.8 mm). - There is a label display space on the lower surface. - A high-quality stainless steel screw with high corrosion resistance is used. - The use purpose is electrical and electronic control equipment such as heating, ventilation, air conditioning and security.

    ab
    45.46€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

  • Sizes Width W(mm)

    • 33.5~49
      • 33.5
      • 35
      • 35.5
      • 43.1
      • 43.5
      • 45
      • 46
      • 47
      • 49
    • 50~96.3
      • 50
      • 50.1
      • 50.2
      • 54
      • 55.9
      • 56
      • 57.8
      • 58
      • 60
      • 60.3
      • 61
      • 62
      • 62.2
      • 62.7
      • 65
      • 66.5
      • 67.8
      • 68
      • 69.9
      • 70
      • 72
      • 74
      • 74.4
      • 80
      • 81
      • 82
      • 82.4
      • 83
      • 84
      • 85
      • 86
      • 87
      • 88
      • 88.5
      • 90
      • 90.2
      • 90.7
      • 91
      • 91.2
      • 91.4
      • 93
      • 94
      • 95
      • 96
      • 96.3
    • 100~149.9
      • 100
      • 101
      • 101.6
      • 102
      • 104.3
      • 104.6
      • 104.9
      • 105
      • 106
      • 108
      • 108.2
      • 109
      • 110
      • 112
      • 114
      • 115
      • 116
      • 116.5
      • 117
      • 119
      • 120
      • 121
      • 122
      • 124
      • 125
      • 125.2
      • 126
      • 128
      • 128.6
      • 128.8
      • 129.1
      • 129.3
      • 130
      • 132.6
      • 133.5
      • 135
      • 136
      • 137
      • 138
      • 140
      • 142
      • 144
      • 144.3
      • 145
      • 146
      • 147
      • 149.9
    • 150~198
      • 150
      • 153.2
      • 154
      • 154.4
      • 155
      • 157
      • 159
      • 160
      • 166
      • 168
      • 170
      • 174.3
      • 180
      • 182
      • 184
      • 185
      • 188.5
      • 190
      • 194
      • 195
      • 196
      • 198
    • 200~244
      • 200
      • 201
      • 203
      • 205
      • 205.2
      • 210
      • 220
      • 222
      • 224.3
      • 228
      • 230
      • 235
      • 240
      • 244
    • 250~276
      • 250
      • 256
      • 260
      • 264
      • 265
      • 270
      • 274
      • 275
      • 276
    • 300~348
      • 300
      • 302
      • 310
      • 320
      • 321
      • 326
      • 330
      • 332
      • 335
      • 348
    • 364~384
      • 364
      • 380
      • 384
    • 400~435
      • 400
      • 412
      • 418
      • 435
    • 479
    • 500~530
      • 500
      • 530
    • 560~578
      • 560
      • 568
      • 578
    • 600~637
      • 600
      • 637
    • 780
  • Dimensions Vertical H(mm)

    • 12
    • 13
    • 13.3
    • 13.9
    • 14.8
    • 15
    • 15.5
    • 16
    • 17.8
    • 18
    • 18.5
    • 18.9
    • 19
    • 19.2
    • 20
    • 20.1
    • 20.2
    • 20.7
    • 21
    • 22
    • 22.9
    • 23.9
    • 24
    • 24.2
    • 24.5
    • 24.7
    • 25
    • 25.4
    • 25.5
    • 26
    • 26.2
    • 28
    • 28.2
    • 28.9
    • 29.6
    • 30
    • 30.5
    • 30.6
    • 31.5
    • 32
    • 32.6
    • 32.7
    • 33
    • 33.4
    • 33.5
    • 34.2
    • 34.4
    • 35
    • 35.4
    • 36.5
    • 37
    • 38
    • 38.5
    • 39.2
    • 39.3
    • 39.5
    • 40
    • 40.2
    • 40.6
    • 41.1
    • 42.7
    • 42.8
    • 44
    • 45
    • 45.4
    • 45.8
    • 46
    • 46.5
    • 47
    • 48
    • 48.5
    • 49.8
    • 50
    • 50.5
    • 51.5
    • 51.9
    • 52
    • 52.8
    • 53
    • 54
    • 55
    • 55.2
    • 55.5
    • 56
    • 56.5
    • 57
    • 57.2
    • 57.4
    • 58.6
    • 59
    • 60
    • 62.8
    • 64
    • 64.8
    • 65
    • 67.8
    • 68
    • 68.8
    • 69
    • 70
    • 71.3
    • 71.5
    • 75
    • 75.5
    • 75.8
    • 76.5
    • 80
    • 80.5
    • 80.6
    • 85
    • 90
    • 91
    • 91.8
    • 94.8
    • 97
    • 98
    • 100
    • 102
    • 103
    • 104.7
    • 105
    • 106
    • 106.5
    • 108
    • 110
    • 112
    • 114
    • 117
    • 119
    • 120
    • 120.5
    • 122
    • 123
    • 124
    • 125
    • 126
    • 130
    • 133
    • 135
    • 137
    • 140
    • 141
    • 145
    • 147
    • (149)
    • 149
    • 150
    • (151)
    • 151
    • 154
    • 155
    • 157
    • 159
    • 160
    • 163
    • 170
    • 179
    • 180
    • 185
    • 187
    • 189
    • 190
    • 198
    • 199
    • 200
    • 203
    • 205
    • 212
    • 213
    • 220
    • 236
    • 237
    • 247
    • 250
    • 256
    • 267
    • 270
    • 274
    • 275
    • 280
    • 283
    • 295
    • 297
    • 300
    • 302
    • 303
    • 315
    • 335
    • 337
    • 341
    • 347
    • 350
    • 361
    • 363
    • 377
    • 378
    • 400
    • 406
    • 410
    • 412
    • 420
    • 423
    • 430
    • 483
    • 484
    • 496
    • 500
    • 517
    • 550
    • 560
    • 571
    • 573
    • 600
  • Depth Size D(mm)

    • 7.3
    • 22
    • 23.5
    • 24
    • 25.5
    • 28
    • 29
    • 36
    • 36.5
    • 36.6
    • 38
    • 39
    • 39.6
    • 40.5
    • 41
    • 41.5
    • 42
    • 44
    • 44.5
    • 44.8
    • 45
    • 45.1
    • 46
    • 47
    • 48
    • 49
    • 50
    • 50.5
    • 51.2
    • 52
    • 52.5
    • 53
    • 53.5
    • 54
    • 56
    • 57
    • 57.6
    • 58
    • 58.5
    • 59
    • 59.8
    • 60
    • 61
    • 62.3
    • 62.7
    • 65.2
    • 68
    • 69
    • 69.5
    • 72.7
    • 74
    • 75
    • 76
    • 76.8
    • 77
    • 80
    • 80.1
    • 81.9
    • 82
    • 82.9
    • 83.5
    • 84
    • 85
    • 86.5
    • 88.3
    • 89.1
    • 90
    • 91
    • 91.9
    • 92
    • 95
    • 96
    • 96.5
    • 98
    • 98.2
    • 98.5
    • 100
    • 102
    • 102.5
    • 105
    • 106
    • 108.2
    • 113.3
    • 114
    • 115
    • 117
    • 120
    • 121
    • 123
    • 126
    • 128
    • 130
    • 133
    • 133.5
    • 135
    • 136
    • 138
    • 140
    • 140.5
    • 140.6
    • 143
    • 145
    • 146.1
    • 150
    • 152
    • 153
    • 154
    • 154.4
    • 155
    • 158
    • 160
    • 162
    • 163
    • 165
    • 166
    • 167
    • 168
    • 172
    • 173.8
    • 174.5
    • 176
    • 176.3
    • 178.7
    • 180
    • 181
    • 183.9
    • 186
    • 186.4
    • 187
    • 188.5
    • 189
    • 190
    • 190.5
    • 192
    • 192.3
    • 192.4
    • 192.6
    • 192.8
    • 194
    • 195
    • 196.1
    • 197
    • 198
    • 200
    • 206
    • 210
    • 212
    • 213
    • 215
    • 216
    • 220
    • 228
    • 229
    • 230
    • 237
    • 240
    • 243
    • 250
    • 252
    • 266
    • 278.5
    • 280
    • 300
    • 500
    • 600
  • Material

  • Protective Function (Environmental Resistance)

  • Intermediate Plate

  • Installation

  • Major Standards

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • MISUMI
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen