• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Externe Teile

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • 8 Tage oder weniger
  • 13 Tage oder weniger
  • 52 Tage oder weniger
  • Rubber Feet

    Rubber Feet

    MISUMI

    Rich in size / load variation endurance

    • Mengenrabatt
    CAD
    2D
    ab
    0.23€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 1 Circuit, 2 Circuit 2 Split, 3 Split Interlock Plug

    1 Circuit, 2 Circuit 2 Split, 3 Split Interlock Plug

    MISUMI

    This is safety equipment mounted on safety doors and machines which prevents accidents caused by doors and machines being turned on carelessly. Standard Japanese manufactured products that are widely used by major automobile and steel manufacturers

    • Mengenrabatt
    ab
    22.63€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Waterproof Cap for Terminal Block Boxes

    Waterproof Cap for Terminal Block Boxes [10 Stk. pro Packung]

    TOYO GIKEN

    [Features] Waterproof Cap for Plugging Terminal Block Box Holes, IP67

    • Mengenrabatt
    ab
    19.09€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Plastic Terminal Block Box, BOXTM Series Accessories

    Plastic Terminal Block Box, BOXTM Series Accessories

    MISUMI

    Accessories for chemical-proof model terminal block box

    • Mengenrabatt
    • IP67
    • Plastic
    CAD
    2D
    ab
    3.02€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Interlock Plug Clasp

    Interlock Plug Clasp

    DAIWA DENGYO

    Fitting for interlock plugs. [Features] · After removing a plug, use the locking clasp to cover the plug and lock it with a key (not included) to prevent accidents caused by inadvertent energizing. Cannot be used with SPTL-11

    • Mengenrabatt
    ab
    20.09€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Box Door Lock, Door Lock, DL Series

    Box Door Lock, Door Lock, DL Series

    OHM ELECTRIC

    No need for cumbersome door opening and closing. One-touch lock requires just a push of the door [Features] ・Opening...a coin or straight slot screwdriver is sufficient. ・Closing...just push on the door. ・No special key is required. ・Simple mounting; does not take up space

    • Mengenrabatt
    CAD
    2D
    ab
    13.21€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • PC Connector BOX

    PC Connector BOX

    SHINOHARA ELECTRIC

    You can do the maintenance and adjustment of the sequencer without opening the door of the control panel. [Features] • AC 100 V outlet in the PC connector BOX (PCB type: 2P E with 2 outlets, PCBK type: 1P with ground) and (standard equipment), data communication connector can be set. You can carry out trial operation adjustments in dusty places without having to open the control panel door (to prevent the intrusion of dust and the like while carrying out the adjustment by test operation). • By attaching the PC connector BOX to the door surface of a sequencer panel or the like that is housed in a find location, adjustment by test operation and maintenance work can be easily carried out. Besides the standard connector for data communication, there are products compatible with the PLCs made by all companies, so please specify the connector and communication cable models.

    CAD
    2D
    ab
    169.58€
    Minimum Lieferzeit
    13 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Parts Mounting Parts-Less Lock OL-F Series

    Parts Mounting Parts-Less Lock OL-F Series [50 Stk. pro Packung]

    OHM ELECTRIC

    Indispensable product for TPMs used to raise wiring / piping, etc. [Features] ・Facilitates cleaning and washing around machinery and facilities. ・Either "screwing" or "banding" can be used for fixation. ・Cabling, flexible tubing, or air hose, etc. can be fixed in three different locations (top, left, right), depending on the application

    • Mengenrabatt
    CAD
    2D
    ab
    14.20€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Relay Box, Accessory (conversion adapter)

    Relay Box, Accessory (conversion adapter) [10 Stk. pro Packung]

    OHM ELECTRIC

    For use with a relay box (conversion adapter)

    • Mengenrabatt
    CAD
    2D
    ab
    18.55€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Coating Substitute Cover Joining Frame (Plastic)

    Coating Substitute Cover Joining Frame (Plastic)

    MIRAI INDUSTRY

    [Features] · No need to use different joining frames for different thicknesses. · This is a good value joining frame which can be cut to the exact thickness required (in 5 mm intervals). · Can be cut easily. · Can be easily cut with a knife.

    ab
    10.34€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Coating Substitute Cover (for octagonal configuration)

    Coating Substitute Cover (for octagonal configuration)

    MIRAI INDUSTRY

    [Features] · Electrodeposition coating (color: black).

    ab
    2.05€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • KBOX-Series Dedicated External Mounting Foot Accessories

    KBOX-Series Dedicated External Mounting Foot Accessories [4 Stk. pro Packung]

    MISUMI

    KBOXEN-Series, Dedicated, External-Mounting Foot

    • Mengenrabatt
    CAD
    2D
    ab
    7.07€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Flat Coating Substitute Cover (iron)

    Flat Coating Substitute Cover (iron)

    MIRAI INDUSTRY

    [Features] · Electrodeposition coating ( black).

    ab
    2.29€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Coating Thickness Cover (iron)

    Coating Thickness Cover (iron)

    MIRAI INDUSTRY

    [Features] · Electrodeposition coating (color: black).

    ab
    2.29€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • BCAS・BCAL dedicated hinge   BCH series

    BCAS・BCAL dedicated hinge BCH series

    BOXCO

    [Features] - BCAS/BCAL Dedicated Series (BCH)

    • Mengenrabatt
    ab
    5.23€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • BCAS・BCALdedicated latch   BCL series

    BCAS・BCALdedicated latch BCL series

    BOXCO

    [Features] -BCASBCAL Dedicated Latch (BCL)

    • Mengenrabatt
    ab
    6.13€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ventilation - VF series

    Ventilation - VF series

    ENSTO

    [Features] · Ventilation (VF)

    • Mengenrabatt
    ab
    5.93€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Extension frame   OPCe series

    Extension frame OPCe series

    ENSTO

    Extension frame (OPCE) [Features] ▪ OPCE includes 4 frame screws for fastening to the body and 1 screw head for turning with a screwdriver

    ab
    24.74€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Aluminum Plate for Engraving

    Aluminum Plate for Engraving [10 Stk. pro Packung]

    AIMARK

    [Features] - Anodized finish for scratch resistance and ease of working. [Use] - An indoor nameplate for small-scale interiors.

    ab
    19.67€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Adjustable Pressure Plug, (Optional) Accessory for Relay Box

    Adjustable Pressure Plug, (Optional) Accessory for Relay Box

    OHM ELECTRIC

    Keeps the pressure inside a relay box constant, while keeping the box waterproof and dustproof. Prevents fluctuations in internal pressure due to a faulty packaging seal and keeps the box from being damaged. The protective structure grade is IP67, ensuring the box is air-permeable. The interior of the box is both dustproof and waterproof, protecting it from condensation and water infiltration.

    ab
    13.45€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Thin jet-proof gallery. Grade: IP45.

    Thin jet-proof gallery. Grade: IP45.

    SHINOHARA ELECTRIC

    Replace the filter from the front. The newly-developed inner part ensures air permeability while keeping water out. Now with a much narrower depth. [Use] - An air-permeable gallery for cubicles and switchboards in harsh outdoor conditions exposed to wind and rain. [Features] - Greatly reduced depth while maintaining the same protection grade (IP45) as previous versions. - The inner part shields the filter surface from exposure to the weather, so rainwater will never affect filtration. - Filter can be maintained from the front. - A 160 mm square fan can be fitted to the rear face of the GTS-20W and GTS-45W. (Use for exhaust purposes.) [Material specifications] - Outer louver: SUS304, 1.5mm, painted with 5Y7/1 (semi-gloss) - Inner louver: Polypropylene - Dustproof filter: nonwoven filter - Filter case: SUS304, 1.2mm, painted with 5Y7/1 - Waterproof packing: CR sponge - Outer louver mounting screw: SUS cross-recessed pan-head flat washer, nylon captive washer, M5 - Conical spring nut: SUS M6

    • Mengenrabatt
    CAD
    2D
    ab
    121.12€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Thin jet-proof gallery (salt-resistant specification GTS-20W-ST). Grade IP55 (category 2)

    Thin jet-proof gallery (salt-resistant specification GTS-20W-ST). Grade IP55 (category 2)

    SHINOHARA ELECTRIC

    Replace the filter from the front. The new 20 type with anti-salt specifications available for our popular thin and jet-proof gallery. [Use] - An air-permeable gallery for cubicles and switchboards installed in environments prone to salt damage, such as coastal areas. [Features] - Greatly reduced depth while maintaining the same protection grade (IP45) as previous versions. - The inner part shields the filter surface from exposure to the weather, so rainwater will never affect filtration. - Filter can be maintained from the front. - A 160 mm square fan can be fitted to the rear face of the GTS-20W and GTS-45W. (Use for exhaust purposes.) [Material specifications] - Outer louver: SUS304, 1.5mm, painted with 5Y7/1 (semi-gloss) - Inner louver: Polypropylene - Salt filter: Salt filter (trapping efficiency: 90%) - Filter case: SUS304, 1.2mm, painted with 5Y7/1 - Waterproof packing: CR sponge - Outer louver mounting screw: SUS cross-recessed pan-head flat washer, nylon captive washer, M5 x 8 - Conical spring nut: SUS M6 x 8

    • Mengenrabatt
    CAD
    2D
    ab
    306.58€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Thin jet-proof gallery (salt-resistant specification GTS-45W-ST). Grade IP55 (category 2)

    Thin jet-proof gallery (salt-resistant specification GTS-45W-ST). Grade IP55 (category 2)

    SHINOHARA ELECTRIC

    Replace the filter from the front. The new 45 type with anti-salt specifications available for our popular thin and jet-proof gallery. [Use] - An air-permeable gallery for cubicles and switchboards installed in environments prone to salt damage, such as coastal areas. [Features] - Greatly reduced depth while maintaining the same protection grade (IP45) as previous versions. - The inner part shields the filter surface from exposure to the weather, so rainwater will never affect filtration. - Filter can be maintained from the front. - A 160 mm square fan can be fitted to the rear face of the GTS-20W and GTS-45W. (Use for exhaust purposes.) [Material specifications] - Outer louver: SUS304, 1.5mm, painted with 5Y7/1 (semi-gloss) - Inner louver: Polypropylene - Dust filter: Salt filter (trapping efficiency: 90%) - Filter case: SUS304, 1.2mm, painted with 5Y7/1 - Waterproof packing: CR sponge - Outer louver mounting screw: SUS cross-recessed pan-head flat washer, nylon captive washer, M5 x 8 - Conical spring nut: SUS M6 x 12

    • Mengenrabatt
    CAD
    2D
    ab
    410.20€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Adhesive Type Card Holder

    Adhesive Type Card Holder [1-50 Stk. pro Packung]

    SAKAZUME ELECTRIC

    [Features] - Card holder. - Adhesive design no need for screws. - Card included. - Double-sided tape included. - CH-PW is a twin type.

    • Mengenrabatt
    ab
    1.17€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Control Panel Easy Filter (flame-retardant / thick type)

    Control Panel Easy Filter (flame-retardant / thick type)

    TRUSCO NAKAYAMA

    [Features] • Easily fixed in place and long service life thanks to thick fabric padding • Protects equipment from oil mist and dust • Magnets on the holder for ease of mounting • Perforations allow easy replacement of dirty filters • Replaceable filters for low running costs [Applications] • For use as a control panel filter, or pre-filter for a compressor or oil conditioner. For equipment subject to large air flows

    ab
    19.38€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Control Panel Easy Filter (flame-retardant type)

    Control Panel Easy Filter (flame-retardant type)

    TRUSCO NAKAYAMA

    [Features] - Protects electrical components from oil, mist and dust. - Holder is equipped with a magnet for easy mounting. - Perforations allow dirty filters to be easily removed and replaced. - Replace the filter for more cost efficiency. [Use] - For control panel cooling fans, etc.

    ab
    19.58€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Panel Multi-Key

    Panel Multi-Key

    DENSAN

    [Features] - A duplicate key for switchboards and distribution boards. - Works with four different key types.

    ab
    10.08€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • DSHI type hinge

    DSHI type hinge

    ENSTO

    [Features] - A hinge for cover customization

    ab
    12.53€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Latch WQL Series

    Latch WQL Series [2 Stk. pro Packung]

    ENSTO

    [Features] Latch

    • Mengenrabatt
    ab
    28.66€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • “Control Panel Filter 2, H Type” (Flame Retardant)

    “Control Panel Filter 2, H Type” (Flame Retardant)

    HASHIMOTO CLOTH

    [Features] - Flame retardant. - Easy installation with a magnet; protects electronic parts from oil, mist, and dust. - Perforations make it easy to remove dirty filters. - Externally-mounted; check it for dirt at a glance. [Use] - Mount to the control panel air intake to prevent wear and tear on electric components and fans inside the control panel.

    • Mengenrabatt
    ab
    19.39€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Air Filter 2 A Type, A Type (Flame Retardant)

    Air Filter 2 A Type, A Type (Flame Retardant)

    HASHIMOTO CLOTH

    [Use] - As a pre-filter for compressors and oil conditioners.

    • Mengenrabatt
    ab
    19.34€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen