• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Montagewinkel

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • 8 Tage oder weniger
  • 9 Tage oder weniger
  • 10 Tage oder weniger
  • 13 Tage oder weniger
  • 14 Tage oder weniger
  • ABC Channel

    ABC Channel [5-40 Stk. pro Packung]

    SHINOHARA ELECTRIC

    Use as structural material for wiring board, cubicle, and control panel, and the like. [Features] • You can perform design changes, expansions, and renovations as the user like. • Since outer box sheet metal processing and inner wiring are advanced through separate processes, the delivery time can be shortened. • If an equipment and parts wiring diagram is available, the user can proceed with assembly wiring without waiting for completion of the casing box. • Includes easy-to-use A.B.C. parts for the A.B.C. channel; improved efficiency. * The characteristics of molten zinc plating process result in plating film left on the angle length hole, and in roughness in the surface finish. Please be aware of this.

    • Mengenrabatt
    CAD
    2D
    ab
    25.49€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Multi-angle Z type

    Multi-angle Z type

    KAMEDA DENKI

    This is a Z-type angle with limitless applications in electrical work, air conditioning work, wiring boards etc.

    • Mengenrabatt
    ab
    68.39€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Flat bar

    Flat bar

    KAMEDA DENKI

    This is a flat bar with holes, with limitless applications in electrical work, piping, air conditioning work, wiring boards, etc.

    • Mengenrabatt
    ab
    10.75€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Multi-channel, KC Type

    Multi-channel, KC Type [1-20 Stk. pro Packung]

    KAMEDA DENKI

    Perforated C type channel with unlimited applications, including electrical work, piping, air-conditioning work, and switchboards. [Features] · Perforated C type channel with unlimited applications, including electrical work, piping, air-conditioning work, and switchboards.

    • Mengenrabatt
    ab
    13.01€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Cable Bracket (Cast Iron, Aluminum)

    Cable Bracket (Cast Iron, Aluminum) [1-3 Stk. pro Packung]

    SHINOHARA ELECTRIC

    Use as a terminal processing bracket for a power cable

    • Mengenrabatt
    ab
    11.18€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • L-Shaped Box Mounting Bracket

    L-Shaped Box Mounting Bracket

    MISUMI

    Fixing bracket suitable for fixing the box alongside the device, etc.

    • Mengenrabatt
    ab
    49.74€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Uni-Clasp

    Uni-Clasp [1-10 Stk. pro Packung]

    KAMEDA DENKI

    Multi-angle U connection clasp. [Features] · Very useful for putting clasps together in various positions. UN-26 coupler series works with the U-1 and U-26; the UN-38 series works with the U-38 and L-40, and the UN-40 series works with the L-40. · The UN-26 series includes parts with attractive nickel plating, making them useful support clasps for interior furniture as well

    • Mengenrabatt
    ab
    3.95€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Mini Fitting - Switch Mounting Platform S-14

    Mini Fitting - Switch Mounting Platform S-14 [1-10 Stk. pro Packung]

    KAMEDA DENKI

    Fitting for mounting switches and knobs. [Features] RoHS-compliant product (3C) S-14 is a space saving type. S-14Z is a Z-type for easy retrofitting. S-14F can be mounted onto free rail (DIN rail) at any location.

    • Mengenrabatt
    ab
    3.17€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Mini Bracket, Switch Mount, ZK

    Mini Bracket, Switch Mount, ZK [10 Stk. pro Packung]

    KAMEDA DENKI

    The ZK series of brackets is used to mount switches and volume controls. [Features] - A total of five different switch mounting hole sizes are provided: 9 φ, 13 φ, 22 φ, 25 φ, and 30 φ, providing compatibility with all switches and volume controls. - Each size supports both one mounting point and two mounting points; multiple mounting points of three or more are also supported by combining multiple instances of the above. - The switch mounting surface is wide, making mounting of nameplates easy. - For the 9 φ and 13 φ versions, there is a single small hole at the 0° and 90° positions for locking, so both vertical and horizontal uses are supported.

    • Mengenrabatt
    CAD
    2D
    ab
    17.61€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hexagonal Post

    Hexagonal Post [50-100 Stk. pro Packung]

    KASUGA ELECTRIC

    [Features] Hexagonal post for height adjustment.

    • Mengenrabatt
    ab
    36.98€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • U Canada

    U Canada [1-20 Stk. pro Packung]

    KAMEDA DENKI

    In addition to the switchboard’s construction material, it contains U-type channels that allow for electrical projects, etc.

    • Mengenrabatt
    ab
    7.23€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Centronics Connector Bracket

    Centronics Connector Bracket

    MISUMI

    2 models: flat plate and L-shaped which is convenient for mounting

    • Mengenrabatt
    CAD
    2D
    ab
    5.15€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Equipment mounting base (JD series)

    Equipment mounting base (JD series) [10-50 Stk. pro Packung]

    KASUGA ELECTRIC

    Rich variety of equipment mounting bases. Most suitable as an accessory to aid layout within the panel.

    • Mengenrabatt
    ab
    37.19€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Direct ground terminal

    Direct ground terminal

    KAMEDA DENKI

    Simply weld it to the box to complete the direct ground terminal. [Features] ・The terminal portion is joined to a copper plate, and the welded portion is joined to a steel plate so it won’t come off even if welded.

    • Mengenrabatt
    ab
    3.67€
    Minimum Lieferzeit
    9 Arbeitstage

    *Stückpreis Standardkonfiguration

  • L type bracket  L40 one hole type

    L type bracket L40 one hole type

    KAMEDA DENKI

    An L-bracket for supporting piping.

    • Mengenrabatt
    ab
    7.00€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Minikanagu mounting fitting, S

    Minikanagu mounting fitting, S [10 Stk. pro Packung]

    KAMEDA DENKI

    This product is an auxiliary metal fitting for mounting terminal blocks etc. [Features] ・A mounting hole has now been added, making it easier to use.

    • Mengenrabatt
    CAD
    2D
    ab
    8.15€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Mini brackets, mount brackets for terminal blocks S

    Mini brackets, mount brackets for terminal blocks S [10-50 Stk. pro Packung]

    KAMEDA DENKI

    Auxiliary brackets allow the terminal block to be mounted at an angle.

    • Mengenrabatt
    CAD
    2D
    ab
    5.25€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Short Bar

    Short Bar [10-50 Stk. pro Packung]

    KASUGA ELECTRIC

    An auxiliary accessory for simplifying cross-wiring.

    • Mengenrabatt
    ab
    6.24€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Metal support fitting (standard type)

    Metal support fitting (standard type) [50-100 Stk. pro Packung]

    KASUGA ELECTRIC

    Standard metal support fitting. Optimal as an accessory to aid layout inside the panel.

    • Mengenrabatt
    ab
    38.12€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • KBOX-Series Dedicated Accessory Locking Bracket

    KBOX-Series Dedicated Accessory Locking Bracket

    MISUMI

    Padlock can be mounted

    • Mengenrabatt
    CAD
    2D
    ab
    10.99€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Rail support

    Rail support [1-10 Stk. pro Packung]

    KASUGA ELECTRIC

    [Features] · Simplifies wiring by lifting the rail and changing the mounting angle. · Enables the mounting of terminal blocks to corners of boards and inside confined mounting spaces.

    • Mengenrabatt
    ab
    2.06€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Parts Mounting Parts-Less Lock OL Series

    Parts Mounting Parts-Less Lock OL Series [1-500 Stk. pro Packung]

    OHM ELECTRIC

    Simple mounting that does not require a lot of space. Part mounting is possible even in locations where door and other drilling taps, or welding processes, cannot be performed. [Features] ・Parts mounting is possible even in locations where door and other drilling taps, or welding processes, cannot be performed. ・OL-A, B type is fixed by adhesive. ・Simple usage can be performed. ・The OL-E type can be used as a 20 mm high spacer. ・Boosts the insulation and quake resistance of mounted parts.

    • Mengenrabatt
    CAD
    2D
    ab
    1.41€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SPCM Model Dedicated Accessory, Mounting Base

    SPCM Model Dedicated Accessory, Mounting Base

    MISUMI

    Perfect for the effective utilization of space!

    • Mengenrabatt
    • Aluminum
    • Hole Machining
    • Web Box
    CAD
    2D
    ab
    6.13€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Mini Bracket, Auxiliary Bracket

    Mini Bracket, Auxiliary Bracket [10 Stk. pro Packung]

    KAMEDA DENKI

    This auxiliary bracket is convenient for mounting wiring ducts and small components. [Features] · Can be flexibly used for the support of wiring and small components. · Grove conformation with series of holes allows for flexible positioning. · The product can be further bent for compatibility with hard-to-mount areas.

    • Mengenrabatt
    ab
    4.76€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Triangle Bracket

    Triangle Bracket

    KAMEDA DENKI

    This is a triangular bracket for piping support. [Features] · This is a bracket which is used to support wall surface piping. · The stay is welded and is sturdier than L type brackets. · Both sides are the same length, so it can be used facing either up, down, left or right.

    • Mengenrabatt
    ab
    20.59€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Metal support parts (small-type)

    Metal support parts (small-type) [100 Stk. pro Packung]

    KASUGA ELECTRIC

    Small-type metal support parts. Most suitable as an accessory to aid layout inside the panel.

    • Mengenrabatt
    ab
    69.14€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Channel end cap

    Channel end cap [50 Stk. pro Packung]

    SHINOHARA ELECTRIC

    Used to protect ABC channel terminals. [Features] ・cross-sectional burrs, etc. prevent damage and increase safety. ・This eliminates the need for cross-sectional processing with the intent of making work more efficient.

    • Mengenrabatt
    CAD
    2D
    ab
    47.66€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SPCM Model Dedicated Accessories, External Mounting Foot
    ab
    5.45€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • L-Type Bracket , L40 Two-Hole Type

    L-Type Bracket , L40 Two-Hole Type

    KAMEDA DENKI

    An L-type bracket with holes on both ends. [Features] · Connecting holes included for all mounting types. · Lightweight and easily handled. · Pre-manufactured for to reduce costs and delivery times. · Made of hygienic, rust-resistant stainless steel. · Screw holes included for easy attachment to a wooden base

    • Mengenrabatt
    ab
    6.89€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hexagonal post (with coating)

    Hexagonal post (with coating) [50 Stk. pro Packung]

    KASUGA ELECTRIC

    Height adjustment-use hexagonal posts with insulation coating

    • Mengenrabatt
    ab
    46.93€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Quick holder, KH

    Quick holder, KH [10 Stk. pro Packung]

    KAMEDA DENKI

    A bracket for mounting wiring and other things by gripping it at an angle. [Features] - Bracket is fixed with one screw, minimizing the work required to form holes. - With the KH-65 and KH-100, the wiring can be directly fixed in place using a zip tie. - Brackets with insulation coating also available.

    • Mengenrabatt
    ab
    12.72€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • FRP Structural Insulation Materials

    FRP Structural Insulation Materials

    SHINOHARA ELECTRIC

    Structural materials manufactured from fiberglass-reinforced plastic (FRP). For use in places where insulation properties are required. Note: The width dimension of model CF-45 has been partially modified (46 mm → 45 mm). [Features] · The angle/channel/square pipe structural materials (manufactured from FRP) are base materials that have been reinforced with glass fiber. These are structural materials that have been combined with a thermosetting resin and have insulating properties and strength not provided by ordinary plastics. · This material is widely used as a structural insulating material. · Easy to cut, drill, and process by machine, etc.

    CAD
    2D
    ab
    51.53€
    Minimum Lieferzeit
    23 Arbeitstage

    *Stückpreis Standardkonfiguration

  • MINI Canada duct mount

    MINI Canada duct mount [10 Stk. pro Packung]

    KAMEDA DENKI

    A tool for mounting a control panel rear door wiring duct. [Features] ・Inserting a metal bracket into the pilot lamp or operation switch to secure the duct avoids the need to place stud bolts. ・3 varieties for use with 22φ, 25φ, and 30φ.

    • Mengenrabatt
    CAD
    2D
    ab
    11.52€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Round post (with coating)

    Round post (with coating) [50 Stk. pro Packung]

    KASUGA ELECTRIC

    Unlike the hex type, the round type does not leave gaps in the corners when connected. With insulation coating.

    • Mengenrabatt
    ab
    53.84€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Protective cover stay S19

    Protective cover stay S19 [10 Stk. pro Packung]

    KAMEDA DENKI

    A support tool to attach DIN rail relay and other protective terminal covers. [Features] ・Jointly fasten terminal block stopping tools to more easily attach protective covers. ・Please use the stopping tool for each terminal block market product. ・Two varieties: 20 mm and 35 mm height.

    • Mengenrabatt
    CAD
    2D
    ab
    14.47€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SL Model Dedicated Accessory, Rack-Mount Brackets

    SL Model Dedicated Accessory, Rack-Mount Brackets [2 Stk. pro Packung]

    MISUMI

    Recommended for rack case

    • Mengenrabatt
    • Aluminum
    ab
    18.18€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wiring Bracket Hanger

    Wiring Bracket Hanger [100 Stk. pro Packung]

    KOWA KASEI

    Useful for dealing with wiring bracket vibration [Features] · Attach to the wiring bracket to protect it from shocks. · Can be installed on the top or bottom. · Can be installed after wiring work is complete. · Wiring work can be performed after installation

    • Mengenrabatt
    ab
    143.12€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Mini-Clasp, Strut Clasp

    Mini-Clasp, Strut Clasp [20 Stk. pro Packung]

    KAMEDA DENKI

    A clasp with adjustable height designed for panel doors and devices. [Features] · Easily adjustable with just a screwdriver. · Can be adjusted and fine-tuned after attaching it to a device

    • Mengenrabatt
    ab
    35.88€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Main Branch Bar

    Main Branch Bar [10-30 Stk. pro Packung]

    KASUGA ELECTRIC

    Optimal for main branches. A copper bar branch type with 40° twist machining is also available, further improving wiring work.

    • Mengenrabatt
    ab
    80.69€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Round Post

    Round Post [50 Stk. pro Packung]

    KASUGA ELECTRIC

    Round shape leaves no angle gap when connected, unlike hex posts. [Features] · Tightening using a Phillips screwdriver supported by machining the female threaded portion into a cross. · Unlike a hexagonal post, there is no need to worry about corner shifting during continuous use. · UL and CSA compliant polyolefin heat-shrinkable tubing is used for the side surfaces

    • Mengenrabatt
    ab
    40.29€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wire Holding Clasp

    Wire Holding Clasp

    KAMEDA DENKI

    A clasp for affixing high-voltage lines to epoxy insulators. [Features] - For wiring high-voltage switchboards, high-voltage support insulators, isolators, and shutoff switches. - Complies with RoHS. - Manufactured following the JIS standard for resin formation technology (JISC3851) for stable quality. - Smaller, lighter, more shock resistant, and provides better electrical and mechanical properties than traditional porcelain insulators. - EP-O wire clasp sold separately.

    • Mengenrabatt
    ab
    2.60€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Round Post (Phillips Head Screwdriver)

    Round Post (Phillips Head Screwdriver) [50 Stk. pro Packung]

    KASUGA ELECTRIC

    Round shape leaves no angle gap when connected, unlike with hex posts. For Phillips head screwdrivers (#2). With insulation coating. [Features] · Tightening using a Phillips screwdriver was achieved by machining the female threaded portion into a cross. · Unlike a hex post, there is no worry about corner shifting during continuous use. · UL and CSA standard polyolefin heat-shrinkable tubing is used in the side surfaces.

    • Mengenrabatt
    ab
    62.09€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Quick Strut, Hinge Receiver Side

    Quick Strut, Hinge Receiver Side

    KAMEDA DENKI

    A receiver-side strut for supporting and opening/closing the inside doors of panel boards. [Features] · Both hinge type and fixed type are available. ▪ Supports 5 types of distribution boards of varying depths. · Lightweight while retaining adequate strength. · The center door can be removed by removing the hinge pin

    • Mengenrabatt
    ab
    6.30€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Mini Bracket, Connection / Mounting

    Mini Bracket, Connection / Mounting [10 Stk. pro Packung]

    KAMEDA DENKI

    This is an auxiliary bracket for the mounting, connection, etc. of ducting, wiring, or small components. [Features] · All brackets include tap holes for component mounting, so there is no need for the use of nuts (excluding S-5). · S-11 and S-11B are used when directly connecting U-1 or U-26 (the S-11B includes a 9Φ hole rather than a tap hole). · The S-20-25 and S-20-32 are sturdy right-angle connection brackets. They can be used for anchoring heavy objects.

    • Mengenrabatt
    ab
    5.08€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Supporter-Tightening Auxiliary Tool

    Supporter-Tightening Auxiliary Tool

    SHINOHARA ELECTRIC

    This is an auxiliary tool for tightening supporters. [Features] · The pin element of this product is inserted into the pinhole on the top face of a supporter main body to prevent idling of the supporter during mounting, increasing work efficiency. · A total of 4 different pin pitches are set, making use with any kind of supporter possible.

    • Mengenrabatt
    CAD
    2D
    ab
    20.05€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen