• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Lüftungsschlitze

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 9 Tage oder weniger
  • 17 Tage oder weniger
  • 22 Tage oder weniger
  • Round Louver (Resin)

    Round Louver (Resin)

    MISUMI

    Resin round louver with filter

    • Mengenrabatt
    CAD
    2D
    ab
    12.36€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Steel / Stainless Steel Louver (Small)

    Steel / Stainless Steel Louver (Small) [2 Stk. pro Packung]

    MISUMI

    12 cm fan can be mounted

    • Mengenrabatt
    • Steel
    • Stainless Steel
    CAD
    2D
    ab
    36.11€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Control Panel Filter

    Control Panel Filter [1-2 Stk. pro Packung]

    MISUMI

    Dirt in filter is obvious. Significantly reduces the time and effort needed for filter replacement

    • Mengenrabatt
    ab
    21.10€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ventilation Louver (Cast Iron / Stainless Steel)

    Ventilation Louver (Cast Iron / Stainless Steel)

    SHINOHARA ELECTRIC

    Please use as ventilation components for operation panels, control panels, cubicles, etc. [Features] - By using the ventilation louver, it is not necessary to process vents in panels as in the past enabling significant labor saving. - Mounting is extremely easy. - Mounting can be done simply by fitting the aluminum window frame to the panel from the surface and screwing it in while holding the frame from the back surface. - With blow-in prevention cover, anti-insect net and dust filter accessories, specification can be selected according to the purpose. - Blow-in prevention cover by using the (structure that sends out blow-in rainwater to the outside), it can also be used outdoors (IPX2).

    • Mengenrabatt
    CAD
    2D
    ab
    35.38€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Square Louver (Resin)

    Square Louver (Resin)

    MISUMI

    Resin square louver with filter

    • Mengenrabatt
    CAD
    2D
    ab
    36.75€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Steel Louver

    Steel Louver [2 Stk. pro Packung]

    MISUMI

    Easy Bolt-On Mounting

    • Mengenrabatt
    • Steel
    CAD
    2D
    ab
    43.01€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Jet-proof Type Louver IP45

    Jet-proof Type Louver IP45

    SHINOHARA ELECTRIC

    Please use it on cubicles that are installed in a harsh outdoor conditions such as ventilation part of switchboards and the like. [Features] - You do not need to process ventilation holes in large panels as has been done with conventional products. - Please retrofit this "ventilation gallery" as a part. - Since the ventilation louver and blow prevention cover has become an integrated, it has good waterproof characteristics and a structure that passes JIS C 4620, JIS C 0920 (jet-proof test). - There are stainless steel ventilation louvers available.

    • Mengenrabatt
    CAD
    2D
    ab
    87.41€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ventilation louver For indoor use.

    Ventilation louver For indoor use.

    KAMEDA DENKI

    Ventilation hole for switchboards, control panels and cubicles. For indoor use. [Features] - RoHS compliant product. - Easy to assemble press-in type. - Cutting out the panel the ventilation louver is inserted and a screw can secure the frame by pressing in from the rear surface. - There is a single piece frame for attaching the rear cover, attachment being simple. - The insect net and dust filter can be attached and detached easily with one recently developed knurled nut. So maintenance and replacement also can be easily performed. - The opening covers a wide area and has a beautiful finish.

    • Mengenrabatt
    ab
    37.56€
    Minimum Lieferzeit
    9 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ventilation louver For outdoor use.

    Ventilation louver For outdoor use.

    KAMEDA DENKI

    Ventilation hole for switchboards, control panels and cubicles. Can also be used outdoors. [Features] - RoHS compliant product. - Easy to assemble press-in type. - Cutting out the panel the ventilation louver is inserted and a screw can secure the frame by pressing in from the rear surface. - There is a single piece frame for attaching the rear cover, attachment being simple. - The insect net and dust filter can be attached and detached easily with one recently developed knurled nut. So maintenance and replacement also can be easily performed. - The opening covers a wide area and has a beautiful finish.

    • Mengenrabatt
    ab
    60.45€
    Minimum Lieferzeit
    9 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Small Ventilation Gallery (For Indoor Use)

    Small Ventilation Gallery (For Indoor Use)

    SHINOHARA ELECTRIC

    Indoor installation control panel, please use as a ventilation component for the distribution board, etc. [Features] - Directly on the panel as conventionally done, there is no need to the processing of the vent holes. - The "breathable Gallery" is retrofitted in order to make the work more efficient. - It is also possible to attach the 120 angle motor fan (SG1-10-4).

    • Mengenrabatt
    CAD
    2D
    ab
    16.07€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Round Shape Louvers with Hood

    Round Shape Louvers with Hood

    JAPPY

    [Features] - It has stainless steel outer wall vents for natural air supply and exhaust. - There are 2 design types; one with a round hood and one with a U-shaped hood. - You can choose to have an insect screen and water stop to match the purpose. - High corrosion resistant stainless SUS304 is used as the material.

    ab
    8.95€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Louver with Hood (For Outdoor: FG Type) IPX4

    Louver with Hood (For Outdoor: FG Type) IPX4

    SHINOHARA ELECTRIC

    With hood, so ideal for measures against wind and rain. [Features] - The gallery is equipped with a hood, an effective measure against wind and rain. - Mounting is easy. - Mounting can be done simply by fitting the frame to the panel hole from the front and screwing the press frame from the rear. - With blow-in prevention cover, anti-insect net and dust filter accessories, specification can be selected according to use. - (FG-15, FG-20 only). - Also available as a set with a salt filter.

    • Mengenrabatt
    CAD
    2D
    ab
    66.28€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Jet-proof Type Louver (Resin Cover Type) IP45

    Jet-proof Type Louver (Resin Cover Type) IP45

    SHINOHARA ELECTRIC

    Please use it on cubicles that are installed in a harsh outdoor conditions such as ventilation part of switchboards and the like. The protective cover is made of resin so it is lightweight. [Features] - Significant weight reduction has been achieved by employing resin for the back surface blow prevention cover, and workability has also been improved. - In addition, it is not necessary to paint the blow prevention cover, enabling a reduction in the cost. - It has a structure with excellent waterproof characteristics (IP45)and has passed JISC4620, JISC0920 (jet proof test).

    • Mengenrabatt
    CAD
    2D
    ab
    64.56€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Connected Plastic Louver (for Indoors) IPX2

    Connected Plastic Louver (for Indoors) IPX2

    SHINOHARA ELECTRIC

    Please use for control panels, instrument panels, etc. (Made of resin) [Features] - Installation is easy. - It is easily installed from the back with a mounting bracket; open cut dimension holes in the panel and snap in the plastic louver from the surface. - GP-9 92 angle and GP-12 120 angle fan motors can be mounted. - The mounting of the dust filter is also easy. - When plastic louver joints (PGJ-12, PGJW-12) are used there can be 2 stations, 3 stations.... consolidated (GP-12 only).

    ab
    2.19€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Free Aluminum Louver (FAG Type) 1P x 2

    Free Aluminum Louver (FAG Type) 1P x 2

    SHINOHARA ELECTRIC

    Aluminum ventilation gallery for ventilation of cubicles and distribution boards. [Features] - One of the gallery's features is that it can be made to the desired dimensions. - There is no need to drill holes directly into the panel, as is conventionally done. - Please attach this "free aluminum gallery" as a part afterwards. - High ventilation efficiency, non see through type. - Lightweight, with no danger of rust.

    • Mengenrabatt
    ab
    94.03€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • U-shape Louvers with Hood

    U-shape Louvers with Hood

    JAPPY

    It is a cover with a U-shape hood to make it difficult for rain water to enter. [Features] - It has stainless steel outer wall vents for natural air supply and exhaust. - There are 2 design types; one with a round hood and one with a U-shaped hood. - You can choose to have an insect screen and water stop to match the purpose. - High corrosion resistant stainless SUS304 is used as the material.

    ab
    12.73€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Louver with Fan (Stainless) IP45

    Louver with Fan (Stainless) IP45

    SHINOHARA ELECTRIC

    It is a fan with hood that is possible to use outdoors. [Features] - The water draining filter provides an excellent waterproof structure. - It can be mounted with just a square hole machined on the panel. - The fan comes with a finger guard and a power cord as a set. - The filter can be washed and reused. - For the color of the paint, you can choose beige 5Y7/1 and cream 2.5Y9/1.

    ab
    184.98€
    Minimum Lieferzeit
    22 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Plastic Gallery GPC Series

    Plastic Gallery GPC Series

    SHINOHARA ELECTRIC

    Please use for control panels, instrument panels, etc. The filter can be replaced from the front face. (Made of resin) [Features] - Since it can be mounted to the panel opening with one touch, work efficiency can be improved (it can also be attached with screws). - It can be mounted in succession in the longitudinal and lateral directions with excellent appearance, the commercial value of the panel is increased. - You can easily replace the filter by removing the front louver. - 4.90 angle, 12 angle and 160 angle fans can be mounted.

    ab
    8.34€
    Minimum Lieferzeit
    17 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ventilation Louver (Replaceable Front Filter Type)

    Ventilation Louver (Replaceable Front Filter Type)

    SHINOHARA ELECTRIC

    The filter can be maintained and replaced from the front. [Features] - The filter can be replaced from the front of the gallery, for a great reduction in maintenance work. - There is no need to drill ventilation holes directly into the panel, as is conventionally done, greatly reducing maintenance work. - Also, ventilation holes can be added easily.

    • Mengenrabatt
    ab
    52.55€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Jet-proof Ventilation Louver (Salt Damage Preventing Specification) IP55

    Jet-proof Ventilation Louver (Salt Damage Preventing Specification) IP55

    SHINOHARA ELECTRIC

    Please use as a IP55 ventilator component for the switchboard set up in coastal areas. [Features] - Low-voltage damage (approximately 2:1 compared to conventional products). - High-efficiency for sea salt particles. - Long service life (twice that or more of conventional products). - increased voltage damage is decreased, even when the sea salt particles collected by filters, even if it deliquesces. - Flows downstream and rescattering are significantly decreased, even if sea salt particles collected on filters deliquesces. - Has excellent impact resistance.

    • Mengenrabatt
    CAD
    2D
    ab
    432.67€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ventilation Gallery (Salt Damage Protection Specifications) IP4X

    Ventilation Gallery (Salt Damage Protection Specifications) IP4X

    SHINOHARA ELECTRIC

    Please use as a IP4X ventilator component for the switchboard set up in coastal areas.

    • Mengenrabatt
    CAD
    2D
    ab
    199.78€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • In-Wing Type Ventilating Louver (Jet-proof Type) IP45

    In-Wing Type Ventilating Louver (Jet-proof Type) IP45

    SHINOHARA ELECTRIC

    Please use as ventilation components for operation panels, control panels, cubicles, etc. It is a type that has a large opening area. [Features] - An opening area of 148cm²can be secured and the blow-in prevention cover has outdoors specification. - There is no need to drill ventilation holes directly into the panel, as is conventionally done, greatly reducing maintenance work. - Also, ventilation holes can be added easily. - Since the ventilation louver and blow-in prevention cover has become integrated, it has good waterproof characteristics and a structure that passes JIS C 4620, JIS C 0920 (jet-proof test). - A stainless steel is also available (built to order).

    • Mengenrabatt
    ab
    113.68€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen