• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Standfüße mit Isolierung

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • Insulation Bushing

    Insulation Bushing [100 Stk. pro Packung]

    SHINOHARA ELECTRIC

    Use for floating insulation in sequencers, etc. [Features] · The bushings are provided in male and female sets. The base units of equipment can be securely insulated by the method written below. · The bushings can be used with M4, M5, M6, M8, M10, and M12 bolts.

    • Mengenrabatt
    CAD
    2D
    ab
    34.24€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Bar holder

    Bar holder [50-100 Stk. pro Packung]

    SHINOHARA ELECTRIC

    Use the bus bar to support insulation. [Features] · The copper band and bar holder S are secured and tightened with a mounting bolt for a wide range of band thicknesses. · Reduced manual work compared to conventional insulation materials. · Copper bands can be mounted from both surfaces in a row by inserting the separator into the interstitial space.

    • Mengenrabatt
    CAD
    2D
    ab
    193.80€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Mounting Bracket for Indoor Supporting Insulator

    Mounting Bracket for Indoor Supporting Insulator

    SHINOHARA ELECTRIC

    Can be used as a mounting bracket for indoor support insulators used in bus bars and wires. [Features] - A wide array of different sizes designed to match various mounting hole pitches used for indoor support insulators are available. - Different models can be selected based on the intended application, such as a clamp for round wires (high pressure covered wires) or a clamp for bus bar use (vertical support/horizontal support).

    CAD
    2D
    ab
    5.32€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Resin Insulator

    Resin Insulator [50 Stk. pro Packung]

    SHINOHARA ELECTRIC

    A high-pressure insulating support. [Features] · Smaller and lighter than conventional porcelain insulators, with excellent durability. Useful for streamlining. Features excellent electrical and mechanical properties. · Produced in accordance with JIS standards (JIS-C3851).

    • Mengenrabatt
    CAD
    2D
    ab
    325.00€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Insulating support

    Insulating support [50 Stk. pro Packung]

    KASUGA ELECTRIC

    Convenient for supporting the main and branch bars. Optimal as an accessory to aid layout inside the panel.

    • Mengenrabatt
    ab
    102.18€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • FRP Cleat

    FRP Cleat

    SHINOHARA ELECTRIC

    Please use as a mother wire support mount. Made by FRP [Features] ・FRP materials are used as the machining material for a light weight. ・Does not rust. ・Strong ・Good insulation. · Machining can easily be performed. ・Good resistance to water absorption. · Has superior arc resistance. ・There is no need for post-machining treatment like with Bakelite.

    • Mengenrabatt
    CAD
    2D
    ab
    16.55€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Insulating support, fit-direct-to-panel type

    Insulating support, fit-direct-to-panel type [50 Stk. pro Packung]

    KASUGA ELECTRIC

    Convenient for supporting the main and branch bars. This product attaches directly to the panel and is optimal as an accessory to aid layout inside the panel.

    • Mengenrabatt
    ab
    102.18€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Bus Bar Supporters

    Bus Bar Supporters [20 Stk. pro Packung]

    SHINOHARA ELECTRIC

    Use the polycarbonate bus bar supporters as supports for bus bars. [Features] · Copper strips can be supported by simply sandwiching the tops and bottoms of the strips.

    • Mengenrabatt
    CAD
    2D
    ab
    109.04€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • PP Holders

    PP Holders [100 Stk. pro Packung]

    SHINOHARA ELECTRIC

    Use the PP holders for retaining insulated wires on the inside of high-voltage equipment. [Features] · The PP holders can fully secure wires by tightening a single screw due to their hinged opening and closing type clamp covers. · By using the adapters, wires of various sizes can be fully protected and supported. · Has excellent insulating properties (creepage plugs-circuit voltage of 22 kV or more), is lightweight, and won’t crack.

    • Mengenrabatt
    CAD
    2D
    ab
    16.91€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • PP Holder, G Type

    PP Holder, G Type [25-50 Stk. pro Packung]

    SHINOHARA ELECTRIC

    Can be used to maintain insulation wiring within a high-pressure device. Secured using a cable tie. [Features] · Possible to easily and firmly maintain wiring via tightening with a cable band. · A total of three different types of varying heights are available for use with your preferred application. · Has excellent insulating properties, is lightweight, and won’t crack.

    • Mengenrabatt
    CAD
    2D
    ab
    48.38€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Branching Bus Support Base

    Branching Bus Support Base

    SHINOHARA ELECTRIC

    Use to support bus lines [Features] · No need to manually treat insulation like before. · Made of lightweight, non-breakable plastic. · Excellent insulation (for low voltages)

    CAD
    2D
    ab
    2.83€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Three-Stage Support Base

    Three-Stage Support Base [1-25 Stk. pro Packung]

    SHINOHARA ELECTRIC

    Can be used as a bus support base. Achieves space savings with three-stage design. [Features] · Can easily support a copper band by simple insertion of square nut(s). · Resin molding ensures that the product is lightweight and will not crack.

    • Mengenrabatt
    CAD
    2D
    ab
    6.39€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Free Cleat Mount

    Free Cleat Mount

    SHINOHARA ELECTRIC

    Use the free cleat mount for damping wire vibrations. [Features] · Holes have been drilled into the extruded resin material at 20 mm intervals. · Cables can be simply supported at intermediate locations by using zip ties.

    • Mengenrabatt
    CAD
    2D
    ab
    8.25€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • EI Supporters

    EI Supporters

    SHINOHARA ELECTRIC

    Use the EI supporters to support the conductors on the inside of low-voltage equipment. The supporters are manufactured from epoxy resin. [Features] · The load-bearing capacity is superior to that of conventional supporters. Therefore, the scope of application has been expanded further. · Has excellent insulating properties, is lightweight, and won’t crack.

    CAD
    2D
    ab
    3.22€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • WS Wire Supporter

    WS Wire Supporter

    SHINOHARA ELECTRIC

    Use as a wire support base [Features] · Three types, from WS-1 to WS-3. Combine WS-1 with WS-2 to support a wide variety of electrical lines

    CAD
    2D
    ab
    1.73€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Sloped Bus Support Base

    Sloped Bus Support Base [1-10 Stk. pro Packung]

    SHINOHARA ELECTRIC

    Can be used as a bus support base (sloped bus support base) [Features] · The sloped bus makes wire connection work easy. · Allows for a reduction in mounting space.

    CAD
    2D
    ab
    2.83€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Insulating Supports for Main Branches

    Insulating Supports for Main Branches [10 Stk. pro Packung]

    KASUGA ELECTRIC

    Supports for Branches

    • Mengenrabatt
    ab
    51.78€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • EP Holders

    EP Holders [80-100 Stk. pro Packung]

    SHINOHARA ELECTRIC

    Use the emergency power holders for retaining the insulated wires on the inside of high-voltage equipment. This type of holder is secured by bolts on both sides. [Features] · This product has been manufactured based on the criteria that have been established in the guidelines for certification of electrical equipment receiving cubicle-type, dedicated, emergency power supply, enacted by the Japan Electric Association. · By using the adapters, wires of 5.5–250 ksi can be fully secured. · Excellent insulating properties (creepage plugs-circuit voltage of 22 kV or more), is lightweight, and will not crack.

    • Mengenrabatt
    CAD
    2D
    ab
    25.49€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 20Stage support mount

    20Stage support mount

    SHINOHARA ELECTRIC

    Please use as an ELB ground support mount. [Features] ・By arranging copper bus bars on 2 vertical levels, particularly when ELB and general purpose ground bars need to be distinguished, this product can be used in the ELB vicinity within a small space so as to install 2 ground bars.

    CAD
    2D
    ab
    3.77€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen