• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Schnittstellen-Klemmenträger (Rund- / Y-Klemmen)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 5 Tage oder weniger
  • 7 Tage oder weniger
  • 16 Tage oder weniger
  • 17 Tage oder weniger
  • 19 Tage oder weniger
  • 22 Tage oder weniger
  • 27 Tage oder weniger
  • 32 Tage oder weniger
  • 33 Tage oder weniger
  • Connector Terminal Block Conversion Unit (Slim Type) XW2D

    Connector Terminal Block Conversion Unit (Slim Type) XW2D

    OMRON

    [Features] - Slim connector terminal block conversion unit. - Mounting area reduced 35% (compared to the manufacturer's XW2B 40 pole); contributes to a more compact control panel and automated equipment. - Terminal screws adopt a drop-prevention structure. - Crimped terminal uses both rounded terminals and Y-terminals. - Supports both DIN rails and screw mounting. - Keeps the open state when mounting/dismounting to DIN rails. - Adopts a unique DIN rail lock. - Fastens terminal cover in an open state. - Screw terminal disposes differently colored terminal screws for each of the five terminals to be able easily to count terminal number.

    • Mengenrabatt
    ab
    29.99€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Connector Terminal Block Conversion Unit (Standard Type) XW2B (Standard Type)

    Connector Terminal Block Conversion Unit (Standard Type) XW2B (Standard Type)

    OMRON

    [Features] - Connector and terminal block are easy to replace, so wiring is conserved in the control panel. - Supports both DIN rail mounting and screw mounting. - Connector side is standardized to MIL flat cable connector and the multi-polar rectangular connectors. - M3 screw type, and M3.5 screw type are available for terminal blocks. - Specialized for manufacturer programmable controllers. - Prepare connector cables (sold separately).

    ab
    30.20€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Connector Terminal Block Conversion Unit XW2R (PLC Connection Type)

    Connector Terminal Block Conversion Unit XW2R (PLC Connection Type)

    OMRON

    Reduced the trouble of checking the signal wiring by the PLC specialized wiring pattern. PLC connecting type Connector terminal block conversion unit.

    • Mengenrabatt
    ab
    28.38€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Interface Terminal Pitch Slim Shape 7 mm Terminal Pitch

    Interface Terminal Pitch Slim Shape 7 mm Terminal Pitch

    KASUGA ELECTRIC

    Realized Industry's smallest 7 mm pitch using M3 screws!! Pursuing further space saving compared to the TIFA 7 series!! [Features] - A slim type with abundant number of poles held by the TIFA series. - A series pursuing further space saving, approximately 12% reduction of the mounting space, compared to the TIFA 7 series. - Other than self up screw, prepared a fall prevention screw structure where the screws do not fall even if you turn the terminal board upside down. - For KASUGA interface terminal board, you can choose from a wide variation according to usage. - RoHS directive compliant.

    • Mengenrabatt
    CAD
    2D
    ab
    24.21€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Connector Terminal Block Conversion Unit XW2R (General-purpose Type)

    Connector Terminal Block Conversion Unit XW2R (General-purpose Type)

    OMRON

    [Features] - A general use type of connector terminal block conversion unit that can be used for various kinds of wiring saving.

    ab
    27.44€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Angled Shape 7 mm Terminal Pitch

    Angled Shape 7 mm Terminal Pitch

    KASUGA ELECTRIC

    Realized Industry's smallest 7 mm pitch using M3 screw!! Made a slope on the terminal board considering the wiring work. [Features] - This is a series which the work has been improved towards downward and side surface mounting, having a slope on the terminal parts of the interface terminal board (standard type). - RoHS directive compliant.

    • Mengenrabatt
    CAD
    2D
    ab
    26.19€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Interface Terminal - Standard 8.5 mm Pitch

    Interface Terminal - Standard 8.5 mm Pitch

    KASUGA ELECTRIC

    Considering current drop etc., 1 size larger 2 mm2electric wire can also be used for wiring. [Features] - Interface terminal board of a standard 1 to 1 connecting wire. - The space-saving design terminal pitch 7 mm type is 150 mm wide for 40 electrodes, and JIS standard crimping terminals can be used even though it is compact. - A fall prevention screw structure type is available in which the screws do not fall out even if turned upside down. - The terminal pitch 8.5 mm type prioritizes usability, and maintains sufficient space between the upper and lower terminal screws, making it possible to re-tighten the upper and lower terminal screws after wiring. - It is possible to exchange the bottom wiring without removing the top wiring. - Moreover, considering current drop etc., it is possible to use 2 mm²electric wire wiring, which is 1 size bigger than the other series. - Other than that, there is a line up of terminal pitch 3.8 mm and 5 mm types that have adopted the re-tightening type screws, saving more space and realizing miniaturization. - Compliant with RoHS directives.

    • Mengenrabatt
    CAD
    2D
    ab
    28.61€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Circuit Pattern Compatible

    Circuit Pattern Compatible

    KASUGA ELECTRIC

    Aligned in order from left of the terminal board to make the signal circuit wiring easy, matching the PLC. Realized space saving as there are no empty terminals.

    • Mengenrabatt
    CAD
    2D
    ab
    36.23€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Clutch Lock Y Terminal Block, Round Terminal Block

    Clutch Lock Y Terminal Block, Round Terminal Block

    KASUGA ELECTRIC

    The removal of wiring or wires inserted in the crimp (Round/Y-shaped) terminal can be done by using a screw driver or such to press the release button and just pulling (saving man-hours). The terminal portion has a 5 mm pitch and is compact (space-saving). [Features] - It is a one-to-one connection clutch lock type (screwless type) crimping terminal dedicated connection.

    • Mengenrabatt
    CAD
    2D
    ab
    31.38€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Connector Terminal Block Conversion Unit (Common Type) XW2C-20G5-IN16

    Connector Terminal Block Conversion Unit (Common Type) XW2C-20G5-IN16

    OMRON

    [Features] - Equipped with power source common terminal and action indication LED, realized wire saving between the input device and control inner board. - Equipped with power source common terminal for input devices. - With LED, where you can see if the input signal is ON, OFF. - DIN rail, and screw mounting common type. - Prepared exclusive connection cable (sold separately).

    ab
    53.21€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Power Source Common Terminal

    Power Source Common Terminal

    KASUGA ELECTRIC

    Interface terminal board with power source common terminal.

    • Mengenrabatt
    CAD
    2D
    ab
    39.60€
    Minimum Lieferzeit
    16 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Connector Terminal Block Conversion Unit Common Terminal Block (2-stage Type for Input and Output) XW2C-20G6-IO16

    Connector Terminal Block Conversion Unit Common Terminal Block (2-stage Type for Input and Output) XW2C-20G6-IO16

    OMRON

    [Features] - Supports any input/output unit of PLC with the common terminal, and by switching the accessory short circuit bar.

    ab
    40.83€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Connector Terminal Block Conversion Unit XW2B

    Connector Terminal Block Conversion Unit XW2B

    OMRON

    Connector terminal block conversion unit XW2B.

    ab
    90.54€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Angled Shape Terminal Block Common Unit

    Angled Shape Terminal Block Common Unit

    KASUGA ELECTRIC

    Realized Industry's smallest 7 mm pitch using M3 screw!! Unit for power source common. Made a slope on the terminal board considering the wiring work. [Features] - A series with power source common terminal made into units. - 3 types lined up according to connecting model. - RoHS directive compliant.

    • Mengenrabatt
    CAD
    2D
    ab
    24.23€
    Minimum Lieferzeit
    16 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Connector Terminal Block Conversion Unit Common Terminal Block (3-stage Type for Input and Output) XW2E

    Connector Terminal Block Conversion Unit Common Terminal Block (3-stage Type for Input and Output) XW2E

    OMRON

    [Features] - 3 step terminal block type which is easy to wire and is a common terminal block with power supply terminal. - Exclusively for PLC 16 point input. - Easy wiring work due to adopting the 3 step terminal block, which connects 1 crimping terminal to the power terminal block.

    ab
    40.83€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Interface Terminal - Common Unit 8.5 mm Pitch

    Interface Terminal - Common Unit 8.5 mm Pitch

    KASUGA ELECTRIC

    Unit for power source common. Considering current drop etc., 1 size larger 2 mm²electric wire can also be used for wiring. [Features] - A series with power source common terminals made into units. - 3 types lined up according to connecting model. - Compliant with RoHS directives.

    • Mengenrabatt
    CAD
    2D
    ab
    26.75€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen