• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Kunstharzschläuche Optionen(Seite2)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • 8 Tage oder weniger
  • 9 Tage oder weniger
  • 12 Tage oder weniger
  • Mall duct wall cover accessories

    Mall duct wall cover accessories

    MIRAI INDUSTRY

    [Features] Wall duct use wall cover for use at points where cable exits from wall. (Combination indoor/outdoor use).

    ab
    4.48€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Tees Accessory for Molding Ducts

    Tees Accessory for Molding Ducts

    MIRAI INDUSTRY

    [Features] · These are tees for use with duct branches of molding ducts (both indoor and outdoor use).

    ab
    6.48€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GP Adapter (for use with PF pipes without screws) G-Type

    GP Adapter (for use with PF pipes without screws) G-Type

    MIRAI INDUSTRY

    [Features] · CD pipe, PF pipe, and thick steel conduit pipe (non-threaded). · Used in a mutually connected manner. · Used for PF pipes and thick steel conduit pipe (without screws). · This GP adapter (G-type) provides mutual connections.

    ab
    2.72€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Feed End (for CD Pipe Use)

    Feed End (for CD Pipe Use)

    MIRAI INDUSTRY

    This is a CD pipe feed end for use with mounting sensors and other feed-pipe equipment. [Features] · Pipe Feed End "Okuriendo®" (G-type). · Used for mounting sensors, etc., by feed pipes. · This is a G type — connect/unlock in one go. · Equipped with seals for preventing intrusion of unset cement. · Equipped with an anchor: By drawing the VVF cable into a double ceiling, heavy objects, such as lighting equipment, etc., can be directly mounted. · Screw pegs: Secured by hammering in the nails provided. · These are also available in red color, which are convenient for distinguishing types of wires. · It can also be easily mounted to a deck plate. · Please use with the deck plate base (sold separately). · This product is used for mounting feed-end and feed piping sensors. · By using the product that is equipped with an anchor, it can be mounted by hanger bolts (for use with CD pipes).

    ab
    2.71€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • F-end (PF tube use with screw) G type

    F-end (PF tube use with screw) G type

    MIRAI INDUSTRY

    [Features] · For use with VVF cable false ceiling connections where sensors, etc. are mounted. · Four colors. · Useful for identifying complex wiring arrangements, etc. (Size 36 excluded). Can be fixed using a single screw. · Equipped with seal for preventing intrusion of unset cement.

    ab
    1.76€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Duct End Accessory for Molding Ducts

    Duct End Accessory for Molding Ducts

    MIRAI INDUSTRY

    This duct end is used for the ends of molding ducts (both outdoor and indoor use). Includes a knock unit for pulling out cables. Can be used for connecting VE pipes and PF pipes. [Features] · Used for the ends of ducts. ·Includes a knock unit for pulling out cables. ·Can be used for connecting VE pipes and PF pipes.

    ab
    2.15€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Guide duct accessories both saddles

    Guide duct accessories both saddles

    MIRAI INDUSTRY

    [Features] Use for duct cover fall prevention, duct deformation prevention, tamper proofing, and connection blind cover. Has a claw for preventing duct deviation inside the saddle. · Can be used for intermediate parts and connections of free joints.

    ab
    2.17€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • CD Pipe Connector (G-Type)

    CD Pipe Connector (G-Type) [1-10 Stk. pro Packung]

    MIRAI INDUSTRY

    This is a CD tube connector. Can instantly perform connection and unlocking. Cap attachment prevents intrusion of non-solidified concrete. [Features] · Connection and release are both possible with just one touch. · Attached cap prevents intrusion of unsolidified concrete.

    ab
    3.42€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • CD tube use bending connector (45°)

    CD tube use bending connector (45°)

    MIRAI INDUSTRY

    [Features] · Convenient for piping, etc., to avoid laterally knocking the pipes and reinforcing bars if the box is positioned low down. Connect/unlock in one go.

    ab
    2.46€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Duct Bend Accessory for Molding Ducts

    Duct Bend Accessory for Molding Ducts

    MIRAI INDUSTRY

    This duct bend for molding ducts is used for corners and other bending positions (both indoor and outdoor use). [Features] · Used for corners and other bending positions. · Model 60 can also be connected to free joints (bellows).

    ab
    4.62€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Divider Board Accessory for Molding Ducts

    Divider Board Accessory for Molding Ducts

    MIRAI INDUSTRY

    [Features] This divider board can be mounted to a molding duct, and used to separate weak and strong current wiring when these are used together.

    ab
    4.62€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Temporary frame bushing 45° (PF tube and compact type) G type

    Temporary frame bushing 45° (PF tube and compact type) G type

    MIRAI INDUSTRY

    Compact, with oscillating 45° temporary frame bushing (PF tube, G-type, compact). Optimal for situations where ferrous piping needs to be avoided. The bushing can be anchored with the included nails. [Features] · Compact, and has a freely adjustable oscillating angle. · Optimal for non-ferrous piping, etc. · Can be anchored with the included nails. · Equipped with seal for preventing intrusion of unset cement.

    ab
    1.73€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Feed end (CD tube-G type)

    Feed end (CD tube-G type)

    MIRAI INDUSTRY

    Used to mount sensors, etc. using a feed pipe. [Features] · Used to mount sensors, etc. using a feed pipe. · Because it is a G-type, it can be easily connected or unlocked. Comes with unset concrete leakage prevention seal. · With anchor: By pulling the VVF cable into double ceilings, heavy things such as lighting equipment can be directly mounted. · Screw grip: can be anchored with the included nails. · There is also a red color that is convenient for identifying the type of wiring. *Can also easily be attached to a deck plate. · Use with the separately sold deck plate pedestal.

    ab
    2.46€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Combination coupling (CD single-layer-wave tube ⇔ VE tube)

    Combination coupling (CD single-layer-wave tube ⇔ VE tube)

    MIRAI INDUSTRY

    [Features] Combination coupling between single-layer CD corrugated tube and VE tube.

    ab
    1.46€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Guide duct accessories entrance cover

    Guide duct accessories entrance cover

    MIRAI INDUSTRY

    [Features] Used in locations where cables are pulled in from drop ceilings.

    ab
    5.05€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • PF Coupling

    PF Coupling

    MIRAI INDUSTRY

    [Features] ·This is a coupling (screw type) unit for connections between PF pipes.

    ab
    5.90€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • End Cover 45 (PF tube use 45° Type)

    End Cover 45 (PF tube use 45° Type)

    MIRAI INDUSTRY

    [Features] · PF tube end cover use for wall-side installations etc. (45° · G type). · Product intermediate between an end cover (standard type) and a temporary frame bushing. · Connection and release are both possible with just one touch.

    ab
    2.03€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Duct Inside Corner Accessory for Molding Ducts

    Duct Inside Corner Accessory for Molding Ducts

    MIRAI INDUSTRY

    [Features] · This is a duct inside corner for use with corner connections of molding ducts (both indoor and outdoor use).

    ab
    4.62€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Guide duct accessories sliding cover

    Guide duct accessories sliding cover

    MIRAI INDUSTRY

    [Features] Use for cable sliding part. · Model 100 can also be connected to free joints (bellows).

    ab
    3.33€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Consolidated Socket Accessory for Molding Ducts

    Consolidated Socket Accessory for Molding Ducts

    MIRAI INDUSTRY

    [Features] This is a consolidated socket for molding ducts that is used in duct-to-duct fitting locations (both indoor and outdoor use).

    ab
    2.15€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • For the temporary frame bushing (CD tube)

    For the temporary frame bushing (CD tube)

    MIRAI INDUSTRY

    Centering coupling (CD tube, G-type) used for lowering into, raising, and penetrating partition walls. [Features] · Used for lowering into, raising, and penetrating partition walls, etc. · Connection and release are both possible with just one touch.

    ab
    1.75€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Feed end (PF tube-G type)

    Feed end (PF tube-G type)

    MIRAI INDUSTRY

    Used to mount a sensor, etc. using a feed pipe. [Features] · G-type design allows it to be easily connected or unlocked. Comes with Toro prevention seal. · With anchor: By pulling the VVF cable to the double ceiling, heavy objects such as lighting apparatus can be directly mounted. · Screw grip: Can be secured using the nails included. · The red color is convenient for identifying the type of wiring. *It can also be easily attached to a deck plate. Deck plate pedestal sold separately.

    ab
    2.46€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • CP Adapter (for use with CD pipes)

    CP Adapter (for use with CD pipes)

    MIRAI INDUSTRY

    [Features] ·For CD pipes and thin steel electrical conduits (with screws or without screws). · CP adapters (G type) used in a mutually connected manner.

    ab
    2.39€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • F Koro End (for use with PF tubes, compact)

    F Koro End (for use with PF tubes, compact)

    MIRAI INDUSTRY

    End cover (compact type for use with PF pipes) which can be used for purposes such as pulling VVF cables into two-layer ceilings and down into walls and partitions between walls. [Features] · Can be used for retraction of VVF cable, pulling cable into side walls, partition walls, etc. · Compact (a quarter of the size of the end cover) and offers easy bar arrangement. · Equipped with seal for preventing intrusion of unset cement. · Can be pulled and attached to a wall frame (with grappling hooks).

    ab
    1.99€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Coupling (for Miraflex Use)

    Coupling (for Miraflex Use)

    MIRAI INDUSTRY

    [Features] ·Miraflex (CD pipes and PF pipes). ·This is an adhesive for coupling (connection type) between these two pipes.

    ab
    1.48€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Temporary frame coupling (CD tube)

    Temporary frame coupling (CD tube)

    MIRAI INDUSTRY

    A centering cap ring used for mutual connection of pipes at concrete joint abutments, etc. Comes with an unhardened concrete leakage prevention seal. [Features] · Ideal for concrete abutments. Simple, one-touch insertion. · Used for mutual connection of pipes at concrete abutments. · Comes with an unhardened concrete leakage prevention seal.

    ab
    4.32€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GP Adapter (for use with CD pipes without screws) G-Type

    GP Adapter (for use with CD pipes without screws) G-Type

    MIRAI INDUSTRY

    [Features] · CD pipe, PF pipe, and thick steel conduit pipe (non-threaded). · Used in a mutually connected manner.

    ab
    2.72€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • End Cover 45 ( CD tube use · 45° type)

    End Cover 45 ( CD tube use · 45° type)

    MIRAI INDUSTRY

    [Features] · CD tube end cover use for wall-side installations etc. (45° · G type). · Product intermediate between an end cover (standard type) and a temporary frame bushing. · Connection and release are both possible with just one touch.

    ab
    2.03€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • New F Koro End (screw mounting, for use with CD pipes with coating included)

    New F Koro End (screw mounting, for use with CD pipes with coating included)

    MIRAI INDUSTRY

    With just a single nail, CD pipes can be anchored in place. This is an end cover (screw nails included) for use with VVF rolling wiring. [Features] · Can be secured simply by simply hammering in a single nail. ·The compact size makes construction a breeze even in confined spaces. · Includes a seal for preventing leakage.

    ab
    1.68€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Mold duct saddle accessories

    Mold duct saddle accessories

    MIRAI INDUSTRY

    [Features] · Cable protector duct saddle used for duct crosscut reinforcements, deformation prevention, and concealing joined sections with cover. · Can be used for the intermediate part and connections of the free joint.

    ab
    2.17€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Temporary frame coupling (CD tube and compact type)

    Temporary frame coupling (CD tube and compact type)

    MIRAI INDUSTRY

    A centering cap ring (compact type) used for mutual connection of pipes at concrete joint abutments, etc. Comes with an unhardened concrete leakage prevention seal. [Features] · Ideal for concrete abutments. Compact type. · Used for mutual connection of pipes at concrete abutments. · Compact type that can be anchored with included nails · Comes with an unhardened concrete leakage prevention seal.

    ab
    1.81€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Temporary frame bushing 45° (CD tube and compact type) G type

    Temporary frame bushing 45° (CD tube and compact type) G type

    MIRAI INDUSTRY

    Compact with swinging 45° temporary frame bushing (CD tube-G-type compact). The bushing can be fixed simply using the included nails. [Features] · Compact and freely adjustable oscillating angle. · Optimal for piping that does not use steel, etc. · Can be secured simply by driving in the attached nail. · Equipped with seal for preventing intrusion of unset cement.

    ab
    1.73€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Feed end (PF tube)

    Feed end (PF tube)

    MIRAI INDUSTRY

    [Features] · Used to mount sensors, etc. using a feed pipe.

    ab
    2.71€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen