• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Formteile Optionen

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • 8 Tage oder weniger
  • 9 Tage oder weniger
  • 10 Tage oder weniger
  • 14 Tage oder weniger
  • Guardman II GII type freerate

    Guardman II GII type freerate

    MASARU INDUSTRIES

    [Features] · Use for floor outlets (cable removal) and branch wiring (1-4 directions). · 4-Direction knockout is provided. Cut with a nipper before use as required. · No. 1 and 2 are the combined type and can be used in 2 locations each with knockout. · For special No. 4 and No. 5, branching No. 5 should be used. · Double-sided tape for mounting is attached to the base.

    ab
    5.81€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Pura mold corner joint accessories (Box type)

    Pura mold corner joint accessories (Box type) [1-10 Stk. pro Packung]

    MIRAI INDUSTRY

    A plastic-mold corner joint (box type) for cable entry points from the ceiling and branches. [Features] - Used for cable entry points from the ceiling and branches. (Can be used even in break lines.) - Even where cable entry points are slightly away from corners, the corner joint direction can be changed to accommodate. - A multi-use knockout compatible with molding types 1-4. - Cables are secured in the base, so a hole is provided to feed in bound cables.

    ab
    1.46€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wagon guide accessories floor plate

    Wagon guide accessories floor plate

    MIRAI INDUSTRY

    [Features] Use when pulling the cable from the floor. It also can be installed in any direction (360°).

    ab
    5.62€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Puramall trunking external corner accessories

    Puramall trunking external corner accessories [1-10 Stk. pro Packung]

    MIRAI INDUSTRY

    [Features] · An external corner can be mounted simply by attaching to the top of the Puramall trunking cover. · 10 colors matching plastic models available. · Partitions can be mounted in conjunction with the plastic model (with partitions).

    ab
    1.46€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • · Cutter for Cable Protector

    · Cutter for Cable Protector

    MIRAI INDUSTRY

    [Features] · Right-angled and 45°. · A cable protector that can easily be cut ratchet style. · One-touch opening using one hand. ▪ 45° diagonal cutting can also be easily and accurately performed.

    ab
    164.89€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wagon guide accessories tees

    Wagon guide accessories tees

    MIRAI INDUSTRY

    This is a tee for use with cable protector molding. [Features] · Equipped with a base; the cover is just placed over the lid for the cable protector (not the end with an end taper). · Easy to position. · A nail hole is provided in the base and the rack can be nailed on (not the end). · A wide variety of colors is available to match to the cable protector.

    ab
    2.90€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Cable Protector stain cover accessories

    Cable Protector stain cover accessories

    MIRAI INDUSTRY

    [Features] • Cable Protector (OP5 type) stainless steel decorative cover. • Without tearing the Cable Protector, direct installation over the cover is easy.

    ab
    13.35€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Metal F-Molding Combination

    Metal F-Molding Combination [1-10 Stk. pro Packung]

    MASARU INDUSTRIES

    This product can be used for pulling wires from the ceiling and also connecting molding to outlet boxes. Includes a knockout piece for abandoned greenery.

    ab
    3.49€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Guard Man II Flat Magali

    Guard Man II Flat Magali [1-10 Stk. pro Packung]

    MASARU INDUSTRIES

    [Features] · Used for right angle connections on flat surfaces. ・This product can be connected in an overlapping format.

    ab
    2.90€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Inside Corner Molding

    Inside Corner Molding [10 Stk. pro Packung]

    FUSO-KASEI

    These are the options for inside corner molding.

    ab
    2.67€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Puramall trunking curved accessories

    Puramall trunking curved accessories [1-10 Stk. pro Packung]

    MIRAI INDUSTRY

    [Features] · A curvature for mounting simply by attaching to the top of the Puramall trunking cover.

    • Mengenrabatt
    ab
    1.46€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Tapered End Accessory for Cable Protector Molding

    Tapered End Accessory for Cable Protector Molding

    MIRAI INDUSTRY

    [Features] · This is a tapered end for use with cable protector molding.

    ab
    2.15€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Puramall trunking corners

    Puramall trunking corners [1-10 Stk. pro Packung]

    MIRAI INDUSTRY

    [Features] · An internal corner for mounting simply by attaching to the top of the Puramall trunking cover.

    ab
    1.46€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Divider Board Accessory for Plastic Ducts

    Divider Board Accessory for Plastic Ducts

    MIRAI INDUSTRY

    This divider board can be mounted to a molding duct, and used to separate weak and strong current wiring when these are used together. Attaches with an adhesive for use with PVC materials. [Features] ·Used to separate weak and strong current wiring when these are used together. The partitioning board is anchored in place with an adhesive (for PVC).

    ab
    6.48€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wagon guide accessories     branch box

    Wagon guide accessories branch box

    MIRAI INDUSTRY

    Branch box for cable protector molding. [Features] Use for cable protector molding branches. Comes with combined knockouts that respectively conform to OP4 to OP8 type molding for medium sizes and to OP4 to OP12 for large sizes. Knockout base, which is convenient for pulling out the cable from the floor. · Comes with combined knockouts that conform respectively to OP58101216 type molding without base.

    ab
    5.48€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wagon guide accessories

    Wagon guide accessories

    MIRAI INDUSTRY

    Accessories used for wagon guide [Features] · Equipped with a base; the cover is simply placed over the lid for the cable protector (not the end with an end taper). · Easy to position. · A nail hole is provided in the base and the rack can be nailed on (not the end). · Each color is arranged according to the cable protector.

    ab
    1.93€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wagon guide accessories guide joint S

    Wagon guide accessories guide joint S

    MIRAI INDUSTRY

    Molding joint (compact) used when changing over from cable protector molding to plastic molding. [Features] · Very compact. Use when changing over from cable protector molding to plastic molding.

    ab
    2.33€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Connector 1

    Connector 1

    JAPPY

    [Features] · All of your problems can be solved with the main unit / flexible cables / connectors. · Say goodbye to external corners, internal corners, and bends forever. · No. 1 connector used for wire molding

    ab
    1.23€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Outside Corner Molding

    Outside Corner Molding [10 Stk. pro Packung]

    FUSO-KASEI

    These are the options for outside corner molding.

    ab
    14.78€
    Minimum Lieferzeit
    9 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Cable Protector slope accessories

    Cable Protector slope accessories

    MIRAI INDUSTRY

    [Features] • Used to facilitate smooth running of dollies and carts by attaching to the Cable Protector.

    ab
    9.49€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Flexible No. 1

    Flexible No. 1

    JAPPY

    [Features] · All of your problems can be solved with the main unit / flexible cables / connectors. · Say goodbye to external corners, internal corners, and bends forever. · Small flexible cabling used for wire molding

    ab
    3.12€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Guard II T-type branching

    Guard II T-type branching [10 Stk. pro Packung]

    MASARU INDUSTRIES

    Used for T-shaped branch connections. Enables overlapping connections. [Features] ・Used for T-shaped branch connections. ・Enables overlapping connections.

    ab
    32.37€
    Minimum Lieferzeit
    9 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Metal F-Mall Flexi Joint

    Metal F-Mall Flexi Joint

    MASARU INDUSTRIES

    Use to connect large bends and bridge different levels. [Features] ・Use to connect large bends and bridge different levels.

    ab
    3.20€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • PuraMall straight accessories

    PuraMall straight accessories

    MIRAI INDUSTRY

    [Features] · A straight section that can be installed simply by laying it over the plastic cable protection cover. · A range of 10 colors are available to match the colors of the plastic cable protection covers. · Partitions can be mounted to match the plastic cable protection cover (with partitions).

    • Mengenrabatt
    ab
    1.46€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Puramall trunking free-joint accessories

    Puramall trunking free-joint accessories [1-10 Stk. pro Packung]

    MIRAI INDUSTRY

    [Features] · An end for mounting simply by attaching to the top of the Puramall trunking cover. · Ideal for use at curved and bridging points.

    • Mengenrabatt
    ab
    1.99€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • PuraMall corner joint accessories

    PuraMall corner joint accessories [1-10 Stk. pro Packung]

    MIRAI INDUSTRY

    [Features] · Corner joint can be installed simply by mounting on cover of PuraMall.

    • Mengenrabatt
    ab
    1.66€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carpet tape for wagon guide

    Carpet tape for wagon guide

    MIRAI INDUSTRY

    Carpet tape that easily anchors cable protector molding to carpet. [Features] Easily anchors cable protector molding to carpet. Shape allows an easy grip into carpets for powerful anchoring. Baseless adhesive tape allows for hardly any warping of the cable protector molding. The long type can be cut to a desired length.

    • Mengenrabatt
    ab
    1.57€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • New F-Molding External Corner

    New F-Molding External Corner [1-50 Stk. pro Packung]

    MASARU INDUSTRIES

    · Used for right angle connections bending outward. Mount with just one touch.

    ab
    1.46€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Metal F-Mall bushing

    Metal F-Mall bushing [1-10 Stk. pro Packung]

    MASARU INDUSTRIES

    [Features] ・Used to connect the metal F-mall to the box. · One-touch installation. ・S-type bushing compatible with box A-type knockout. ・Cannot be used with round-type junction boxes.

    ab
    1.49€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Cable protector accessories mall joint

    Cable protector accessories mall joint

    MIRAI INDUSTRY

    [Features] Mall joint used when installing PuraMall cable protector. Cut grooves allow support for uneven skirting boards, etc. along a wall surface.

    ab
    5.62€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Flexible No. 2

    Flexible No. 2

    JAPPY

    [Features] · All of your problems can be solved with the main unit / flexible cables / connectors. · Say goodbye to external corners, internal corners, and bends forever. · Medium sized flexible cabling used for wire molding

    ab
    3.52€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • New F-Molding Irizumi

    New F-Molding Irizumi

    MASARU INDUSTRIES

    [Features] ・Used for right angle connections bending inward. · One-touch installation.

    ab
    1.33€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • New F Molding Unit: Magali

    New F Molding Unit: Magali

    MASARU INDUSTRIES

    [Features] · Used for right angle connections on flat surfaces. · One-touch installation.

    ab
    1.33€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Metal F-Mall End.

    Metal F-Mall End. [1-10 Stk. pro Packung]

    MASARU INDUSTRIES

    [Features] · To block the end of the cable protector. · Can also be used to block holes through walls. · One-touch installation.

    ab
    2.30€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Metal enclosed joint cover

    Metal enclosed joint cover [1-10 Stk. pro Packung]

    MASARU INDUSTRIES

    Used for straight line connections. Mount with just one touch. [Features] Used for straight line connections. · One-touch installation.

    ab
    1.44€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Bending Woodgrain Molding

    Bending Woodgrain Molding

    FUSO-KASEI

    These are the bending options for woodgrain molding.

    ab
    4.08€
    Minimum Lieferzeit
    9 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Velour protector corner parts

    Velour protector corner parts

    FUSO-KASEI

    One part-four use design (L-type corner, T-shaped corner, cross corner, terminal) [Features] One part-four use design (L-type corner, T-shaped corner, cross corner, terminal)

    ab
    7.22€
    Minimum Lieferzeit
    9 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Puramall trunking end accessories

    Puramall trunking end accessories [1-10 Stk. pro Packung]

    MIRAI INDUSTRY

    [Features] · An end for mounting simply by attaching to the top of the Puramall trunking cover.

    ab
    1.46€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • PuraMall corner joint accessories (free type)

    PuraMall corner joint accessories (free type) [1-10 Stk. pro Packung]

    MIRAI INDUSTRY

    Corner joint for use with PuraMall (free type) [Features] Used with cables that exit from a point in the ceiling. ▪ With knockout that is compatible with a combination of Malls No. 1-5.

    ab
    3.33€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • New F-Molding Joint Cover

    New F-Molding Joint Cover [1-100 Stk. pro Packung]

    MASARU INDUSTRIES

    Used for straight line connection. Mount with just one touch.

    ab
    1.47€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Bending Cross Molding

    Bending Cross Molding

    FUSO-KASEI

    This is the bent section of the molding

    ab
    4.22€
    Minimum Lieferzeit
    9 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Molding Top

    Molding Top [10 Stk. pro Packung]

    FUSO-KASEI

    These are the top options for the molding.

    ab
    10.77€
    Minimum Lieferzeit
    9 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Metal F-Mall external corner

    Metal F-Mall external corner [10 Stk. pro Packung]

    MASARU INDUSTRIES

    [Features] · Used for right-angle connections on external bends. · One-touch installation.

    ab
    10.34€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Metal F-Mall

    Metal F-Mall [1-10 Stk. pro Packung]

    MASARU INDUSTRIES

    [Features] · Used for right angle connections on flat surfaces. · One-touch installation.

    ab
    1.94€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • End Accessory for Cable Protector Molding (Thin Model)

    End Accessory for Cable Protector Molding (Thin Model)

    MIRAI INDUSTRY

    This is an end piece for use with cable protector molding (thin model) products. [Features] · Is lower overall than conventional models, so that hand trucks and trolleys can pass through more smoothly. · Equipped with a base; the cover is just placed over the lid for the cable protector (not the end). · Easy to position. · A nail hole is provided in the base, and the rack can be nailed on (not the end). · Adhesive tape is attached to the end so it can simply be adhered to the cable protector. · Knock-outs are provided on both sides of the center on the end. · A selection of colors is available to match the cable protector molding (thin model) varieties.

    ab
    1.53€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen