• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Schrauben / Beilagscheiben(Seite2)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • 9 Tage oder weniger
  • 11 Tage oder weniger
  • 17 Tage oder weniger
  • Flathead Screw (Chromate Finish)

    Flathead Screw (Chromate Finish) [10-3,500 Stk. pro Packung]

    MISUMI

    Consists of flathead screw / iron (chromate finish)

    • Mengenrabatt
    ab
    0.50€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • U Bolts

    U Bolts [10 Stk. pro Packung]

    KAMEDA DENKI

    U shaped bolt for securing piping. (Note) There has been a change in the steel piping suitable for type UB8-40A (40A,11/4""→40A,11/2"") [Features] - U shaped bolt for securing piping

    • Mengenrabatt
    ab
    7.92€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Spacer / Insulation Model (Female-Female)

    Spacer / Insulation Model (Female-Female)

    MISUMI

    Hexagon spacer / insulation model

    • Mengenrabatt
    ab
    0.61€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Quick Nuts

    Quick Nuts [100 Stk. pro Packung]

    KAMEDA DENKI

    Nut specifically for multichannel KC type. [Features] - Can be fitted from the front in any position on the rail. - Can also be used with U fittings and C channel, the same way as a square nut.

    • Mengenrabatt
    ab
    14.84€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Quick Supports Knurled Screws

    Quick Supports Knurled Screws [50 Stk. pro Packung]

    KAMEDA DENKI

    Locking screw for the quick prop pin receiving side. [Features] - Hinged and fixed types are available. - Supports 5 distribution board depths. - Weight is reduced while keeping enough strength. - The middle door can be attached or removed by inserting/removing the hinge pin.

    • Mengenrabatt
    ab
    40.01€
    Minimum Lieferzeit
    9 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Y PCB Supporter (MCS Series)

    Y PCB Supporter (MCS Series) [100 Stk. pro Packung]

    MISUMI

    Easy-to-remove, single-prop model

    • Mengenrabatt
    • UL
    ab
    2.38€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Stainless Steel Supporters Hex Both Female Screws

    Stainless Steel Supporters Hex Both Female Screws [10-50 Stk. pro Packung]

    KAMEDA DENKI

    Supporter useful for supporting PCB, acrylic cover and other parts. Hex both ends female screw made of strong stainless steel. [Features] - Tough and attractive supporter made of stainless steel. - RoHS compliant product

    • Mengenrabatt
    ab
    13.92€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Washer (Chromate Finish)

    Washer (Chromate Finish) [10-20,000 Stk. pro Packung]

    MISUMI

    Made of washer / iron (chromate finish)

    • Mengenrabatt
    ab
    0.34€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Green Bolts with Washers

    Green Bolts with Washers [100 Stk. pro Packung]

    KAMEDA DENKI

    It is a green colored bolt with a washer for the ground terminals. [Features] - It is a bolt with the head painted green that is used for ground terminals. - RoHS compliant product. - Baked paint color that does not peel off is generously applied. - Either a flat-tip screwdriver or a Phillips-head screwdriver can be used. - BGS is equipped with a convenient washer.

    • Mengenrabatt
    ab
    47.12€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Snap Nuts

    Snap Nuts [100 Stk. pro Packung]

    KAMEDA DENKI

    Fall out prevention type nut for multi angle and U fittings. [Features] - Nut catches on the inside of hexagonal or square holes, so can be used for any fitting as long as it has a 10 – 11 mm wide hole.

    • Mengenrabatt
    ab
    76.99€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hexagonal Nut (Chromate Finish)

    Hexagonal Nut (Chromate Finish) [10-8,000 Stk. pro Packung]

    MISUMI

    Hexagon nut / iron (chromate finish)

    • Mengenrabatt
    ab
    0.60€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Square-Model Spacer / Brass Vertical Model with Duracon Seat

    Square-Model Spacer / Brass Vertical Model with Duracon Seat

    MISUMI

    Square model spacer, brass vertical model with Duracon seat

    • Mengenrabatt
    ab
    1.08€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Green Bolts

    Green Bolts [100 Stk. pro Packung]

    KAMEDA DENKI

    It is a green colored bolt for the ground terminals. [Features] - Baked paint color that does not peel off is generously applied. - Either a flat-tip screwdriver or a Phillips-head screwdriver can be used. - BGS is equipped with a convenient washer.

    • Mengenrabatt
    ab
    28.35€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Free Nuts

    Free Nuts [100 Stk. pro Packung]

    KAMEDA DENKI

    Nut specifically for free rail DA-201. [Features] - Advantage of free rail system. - Makes nearly all the components in a control board rail mountable. - Can easily adapt to design changes and component additions. - Heavy components can also be attached securely. - Design hours can be reduced significantly. - Some components cannot be fitted.

    • Mengenrabatt
    ab
    25.53€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Setscrews for Connecting Supporters

    Setscrews for Connecting Supporters

    SHINOHARA ELECTRIC

    Supporters can be jointed for use

    CAD
    2D
    ab
    1.27€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Decorative Screws

    Decorative Screws [5-500 Stk. pro Packung]

    SHINOHARA ELECTRIC

    Use these as decorative screws for decorative panels of distribution boards

    • Mengenrabatt
    CAD
    2D
    ab
    17.98€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Polyphenylene Sulfide Screws

    Polyphenylene Sulfide Screws [10 Stk. pro Packung]

    MISUMI

    Made of polyphenylene sulfide

    • Mengenrabatt
    ab
    3.38€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Punch Nuts

    Punch Nuts [100 Stk. pro Packung]

    KAMEDA DENKI

    Fall off prevention type nut for U metal fittings. [Features] - Use by pushing the U metal fitting into the concavity until it clicks. - Suitable for working in places where it's difficult to put your hand in as it doesn't fall even after letting go.

    • Mengenrabatt
    ab
    26.83€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen