• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Ständer / Halter / Klemmen / Laborhubtische

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • Laboratory Jack (Knob Type)

    Laboratory Jack (Knob Type)

    WASEPH

    Used for moving heavy objects up and down. Allows the smooth parallel vertical movement by rotating the knob.

    ab
    77.18€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Laboratory Jack (Ratchet Type)

    Laboratory Jack (Ratchet Type)

    WASEPH

    Used for moving heavy objects up and down. Allows the smooth parallel vertical movement by rotating the ratchet.

    ab
    109.00€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Laboratory Jack (Ratchet Handle Type with Rotating Grip, Standard Type)

    Laboratory Jack (Ratchet Handle Type with Rotating Grip, Standard Type)

    TERAOKA

    Faster up and down movement possible when attaching a rotation grip to the ratchet handle.

    ab
    207.67€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Laboratory Jack (Knob Handle Type, Stainless Steel Type)

    Laboratory Jack (Knob Handle Type, Stainless Steel Type)

    TERAOKA

    A lab jack intended for inspection and experiment, which can perform a smooth, repetitive hoisting motion by the operation of a light handle, equipped with a thrust bearing on the handle shaft, such that safe hoisting is possible with little or no sideways play.

    ab
    293.83€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Laboratory Jack (Ratchet Handle Type, Stainless Steel Type)

    Laboratory Jack (Ratchet Handle Type, Stainless Steel Type)

    TERAOKA

    The ratchet handle has a lever switchover setup so that there's no need to detach it from the shaft to flip it over during up and down movement.

    ab
    438.83€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Square Clamp, T-1

    Square Clamp, T-1

    TERAOKA

    The pipe can be made firm due to centering and it is always stable due to the clamping screw in the center. The assembly stand for experiments and the simple equipment post can be used as a connecting tool.

    ab
    6.75€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Clamp Head

    Clamp Head

    TERAOKA

    Please use for the retention of PH meters, measuring equipment and simple devices, observation of plants, etc.

    ab
    93.25€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Test Tube Rack

    Test Tube Rack

    SANWA KAKEN

    The stainless steel (SUS304) has excellent chemical resistance and can be autoclaved.

    ab
    22.22€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Stainless Steel H-Type Stand

    Stainless Steel H-Type Stand

    TERAOKA

    Adjustment screws are included for stability even on uneven surfaces.

    ab
    250.75€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Stainless Steel Angle Clamp

    Stainless Steel Angle Clamp

    TERAOKA

    The angle frame is used to connect round bars / pipes. Due to the difference of groove direction of SU-1 and SU-2, The direction of the angle frame used to connect round bars / pipes can be selected.

    ab
    40.13€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Laboratory Jack (Ratchet Handle Type with Rotating Grip, Stainless Steel Type)

    Laboratory Jack (Ratchet Handle Type with Rotating Grip, Stainless Steel Type)

    TERAOKA

    Faster up and down movement possible when attaching a rotation grip to the ratchet handle.

    ab
    466.25€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Stainless Steel Ball Clamp

    Stainless Steel Ball Clamp

    TERAOKA

    Glassware / clamps to make sure the joints etc stay fixed.

    ab
    8.73€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Square Clamp, T-2

    Square Clamp, T-2

    TERAOKA

    To insert the nail more firmly into column stands, arm fixing pipes of instruments and fixed cross-shaped round rods.

    ab
    11.88€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Stainless Steel Flat Stand

    Stainless Steel Flat Stand

    TERAOKA

    Flat base made of beautiful hairline finish with sufficient weight to achieve balance and stability. Uses double clamp system to prevent loosening of column during use.

    ab
    201.42€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Stainless Steel Angle Clamp, T-18A

    Stainless Steel Angle Clamp, T-18A

    TERAOKA

    As it fits the diameter of up to 18 mm, it is convenient for fixing arms and struts of various experiment equipment as well as vertical and horizontal consolidation of pipes and round bars. The claw clamp firmly secures the pipe.

    ab
    58.94€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Double Door Clamp

    Double Door Clamp

    TERAOKA

    For fixing and holding test equipments and glass apparatus. Vinyl sol finish on hook prevent glass equipment breakage and slippage.

    ab
    14.48€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Chain Clamp

    Chain Clamp

    TERAOKA

    A design that's capable of securely fixing heavy objects. With a wide tightening range, it can be fine-tuned at will. Ideal for fixing large beakers and thick cylindrical items.

    ab
    84.52€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Separable Clamp

    Separable Clamp

    TERAOKA

    Glassware / clamps to make sure the separable flasks and separable covers stay fixed. For 1 set of separable flasks and separable covers, 3 separable clamps are used.

    ab
    14.32€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Side Lock SEE-13

    Side Lock SEE-13

    TERAOKA

    Component for assembling stand on test bench by effectively using wall areas of reagent shelves and storage shelves. By combining Side Lock with optional C holders and pipes, wall stand of desired size can be assembled.

    ab
    21.35€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Stainless Steel Can and Bottle Stand / Lid

    Stainless Steel Can and Bottle Stand / Lid

    SANWA KAKEN

    The stainless steel (SUS304) has excellent chemical resistance and can be autoclaved.

    ab
    28.25€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Stainless Steel Angle Clamp, T-13A

    Stainless Steel Angle Clamp, T-13A

    TERAOKA

    Ideal for use with laboratory stand. Can be used in draft chamber or acid / alkali environments.

    ab
    33.16€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Stainless Steel Angle Clamp, T-20A

    Stainless Steel Angle Clamp, T-20A

    TERAOKA

    As it fits the diameter of up to 20 mm, it is suitable for fixing the small motor arm and strut together. Please use it as a assembly stand of pipes with thick diameter, etc.

    ab
    86.18€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Stainless Steel Double Door Clamp

    Stainless Steel Double Door Clamp

    TERAOKA

    SUS304 is used for the excellent durability and corrosion resistance. Vinyl sol processed to prevent breakage and slippage of the glassware.

    ab
    63.30€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Free Clamp

    Free Clamp

    TERAOKA

    What was until now bothersome activities like removal of experimental apparatus and adjustment of angles for example can be done without removing the MUFU.

    ab
    44.43€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • C Clamp "C-13"

    C Clamp "C-13"

    TERAOKA

    Allows smooth and easy attachment. Wide thumb screw and hook for powerful clamping with light tightening. A tightening device convenient for crossing φ13 mm pipes or round bars. This is used for assembling the stand.

    ab
    7.01€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Spoon and Stirring Rod Holder

    Spoon and Stirring Rod Holder

    RISU

    The bottom surface has anti-slip as well as a detachable drainboard. Hood specified for preventing dust from stored items. Can still be used even when the hood is removed.

    ab
    11.05€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Mayonnaise Bottle Stand

    Mayonnaise Bottle Stand

    SANWA KAKEN

    The stainless steel (SUS304) has excellent chemical resistance and can be autoclaved.

    ab
    74.06€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • System Stand for The Base Stopper

    System Stand for The Base Stopper

    TERAOKA

    A part for fixing the assembly type stainless system stand to floors or lab benches. Please always use the stand for the safe use. (Fixing screws are not included)

    ab
    29.20€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Stainless Steel C Clamp "C-13SUS"

    Stainless Steel C Clamp "C-13SUS"

    TERAOKA

    A tightening device convenient for crossing φ13 mm pipes or round bars. This is used for assembling the stand.

    ab
    13.66€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen