• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Rechteckfräser (Hartmetall)(Seite3)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • 12 Tage oder weniger
  • 32 Tage oder weniger
  • 33 Tage oder weniger
  • Carbide square end mill, 4-flute / 3D Flute Length (regular) model

    Carbide square end mill, 4-flute / 3D Flute Length (regular) model

    MISUMI

    The 3D flute length type that's capable of sophisticated grooving is also known for the producing the high-quality finish

    • Mengenrabatt
    • Non-Coated
    • General Steel
    • 4 Flutes
    • R (Regular)
    ab
    20.36€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Coated Carbide Square End Mill for Graphite Machining, 4-Flute / Long Model

    Diamond Coated Carbide Square End Mill for Graphite Machining, 4-Flute / Long Model

    MISUMI

    The premium diamond coated products are available at the industry's lowest price

    • Mengenrabatt
    • DIA
    • Graphite
    • 4 Flutes
    • L (Long)
    ab
    90.17€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Aurora Coat, Square End Mill, Model ASM4000DL

    Aurora Coat, Square End Mill, Model ASM4000DL

    SUMITOMO ELECTRIC HARDMETAL

    Welding with ultra-smooth auroral coat is reduced and finishes surface. Since the cutting resistance is small, high feed cutting and low rigidity workpiece machining is possible.

    ab
    54.25€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TAC2 2-Flute A Cut End Mill G2

    TAC2 2-Flute A Cut End Mill G2

    ASAHI TOOLS

    Has good tip spacing for good chip control. Uses G2 tip spec, suitable for cast iron and non-ferrous metal machining.

    ab
    65.21€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Micro Diameter Square End Mill 2 Flute

    Micro Diameter Square End Mill 2 Flute

    ATOM

    Ideal for strict machining accuracy of precision molds, precision components, etc. φ0.05 ~ φ0.09 stocks newly added to the standard.

    ab
    46.62€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • MUGEN Coating 4 Flute End Mill

    MUGEN Coating 4 Flute End Mill

    NS TOOL

    Our original MUGEN-COATING has been applied to the 4-flute end mill. Can Cut a Wide Range of Materials, From Raw to Hard

    • Mengenrabatt
    ab
    21.08€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SP Series Square End Mill 2-Flute Coating OK

    SP Series Square End Mill 2-Flute Coating OK

    OKAZAKI SEIKO

    A 2-bladed OK coated end mill that can be used for materials ranging from green timber to stainless steel.

    ab
    9.63€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 2-Flute, Short, WX-EDS

    2-Flute, Short, WX-EDS

    OSG

    General-purpose type of 2 blade end mill that uses a high toughness cemented carbide with excellent stability to the base material. Supports a wide range of work materials and achieves reliable machining.

    • Mengenrabatt
    ab
    16.35€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Corresponding Standing Wall Type for 3-Blade Steel / Aluminum Alloy CA-MFE

    Corresponding Standing Wall Type for 3-Blade Steel / Aluminum Alloy CA-MFE

    OSG

    Provides a wide variety of cutter paths, among high precision, high efficiency standing-wall machining, such as helical processing, contouring, ramping. Due to a long, slim shank, over-hang length is freely adjusted.

    • Mengenrabatt
    ab
    89.06€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • WX Super Coat, Multi-Flutes, Short, WXS-EMS

    WX Super Coat, Multi-Flutes, Short, WXS-EMS

    OSG

    High-rigidity type end mill that was subjected to a new development WX super coat of super-hard and ultra-heat-resistant. High-speed machining of general steel can be done for high-speed, high-precision machining of hardened steel.

    ab
    36.39€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • MUGEN Coating Lead 45 End Mill, 2 Flute

    MUGEN Coating Lead 45 End Mill, 2 Flute

    NS TOOL

    Minimized Runout on the Processing Surface Despite the Ultra Long Flute Length

    • Mengenrabatt
    ab
    27.66€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Aluminum End Mill Set, AL-SEES

    Aluminum End Mill Set, AL-SEES

    DIJET

    [Features] Demonstrates a long tool life due to its micro-grain cemented carbide with excellent wear resistance.

    ab
    123.17€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Square End Mill for Aluminum Machining, 2-Flute / Extra Long Model

    Carbide Square End Mill for Aluminum Machining, 2-Flute / Extra Long Model

    MISUMI

    Achieves the standing-wall machining of aluminum in the first shot! flute length of 5 Times the Blade Diameter

    • Mengenrabatt
    • Non-Coated
    • Aluminum
    • 2 Flutes
    • EXL (Extra Long)
    ab
    30.34€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Regular Model

    Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Regular Model

    MISUMI

    A non-coated type that has achieved both the cost reduction and processing performance

    • Mengenrabatt
    • Non-Coated
    • Copper
    • 2 Flutes
    • R (Regular)
    ab
    16.78€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Extra Long Solid Spiral End Mill, Model ELSM4000

    Extra Long Solid Spiral End Mill, Model ELSM4000

    SUMITOMO ELECTRIC HARDMETAL

    Super long type SSM model. Has the longest blade length in all the SSM series, making it the best in high-precision deep step machining.

    ab
    74.08€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Sumiboron Helical Master Model BNES

    Sumiboron Helical Master Model BNES

    SUMITOMO ELECTRIC HARDMETAL

    Implements a unique cutting debris pocket. Semi-Boron BN350 with excellent damage resistance.

    ab
    236.34€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Long Blade Length Square End Mills, 2-Flute

    Long Blade Length Square End Mills, 2-Flute

    ATOM

    Plentiful blade length variation to allow selection of the most suitable blade length. Suited for resin modeling work, non-ferous parts machining.

    ab
    51.33€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Lead 45 End Mills

    Lead 45 End Mills

    NS TOOL

    The flute length is 5 times the flute diameter, with a 45° helix angle. With sharp edge performs even deep side cutting

    • Mengenrabatt
    ab
    59.25€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • X's Mill, Geo Slot, GEOSLT

    X's Mill, Geo Slot, GEOSLT

    NACHI(FUJIKOSHI)

    Capable of everything from machining holes to grinding grooves in continuous high efficiency machining on materials ranging from green timber to quenched steel.

    ab
    44.61€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model

    TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model

    MISUMI

    In addition to the stock items, the outer diameter can be specified in 0.01 mm increments through additional processing

    • Mengenrabatt
    • TS
    • General Steel
    • 2 Flutes
    • B (Stub)
    ab
    9.42€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • X's Mill, Geo 4XSGEO

    X's Mill, Geo 4XSGEO

    NACHI(FUJIKOSHI)

    By grooving enables high feed and high efficiency machining. Supports wide range from mold steel to difficult-to-cut materials.

    ab
    48.29€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • DLC Mill Slot, Long Shank DLCSTLS

    DLC Mill Slot, Long Shank DLCSTLS

    NACHI(FUJIKOSHI)

    Continuous high efficiency processing from drilling to groove cutting of aluminum alloy is possible. Suitable for deep carving processing.

    ab
    40.03€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Slim Shank Model

    Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Slim Shank Model

    MISUMI

    2 types that are recommended in the standing-wall machining of aluminum

    • Mengenrabatt
    • Non-Coated
    • Aluminum
    • 3 Flutes
    • B (Stub)
    ab
    40.16€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Square End Mill for Graphite Machining, 4-Flute / Non-Coated, Long Model

    Carbide Square End Mill for Graphite Machining, 4-Flute / Non-Coated, Long Model

    MISUMI

    The price of the non-coated product with excellent cost performance has been further reduced

    • Mengenrabatt
    • Non-Coated
    • Graphite
    • 4 Flutes
    • L (Long)
    ab
    67.92€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • End Mill for Aluminum (for Non-Ferrous)

    End Mill for Aluminum (for Non-Ferrous)

    NS TOOL

    Machines with sharp cutting performance due to wide chip pocket

    • Mengenrabatt
    ab
    54.41€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • MUGEN Coating Lead 35 End Mill, 2 Flute

    MUGEN Coating Lead 35 End Mill, 2 Flute

    NS TOOL

    4x Blade Length Eliminates Troubles Such as When 2x Blade Length is Not Sufficient

    • Mengenrabatt
    ab
    12.52€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Multi-Flute Short (High Rigidity) FXS-EMS

    Multi-Flute Short (High Rigidity) FXS-EMS

    OSG

    Extremely tool rigidity end mill for high speed machining. Can perform high-speed machining of hardened steel.

    ab
    76.59€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • LSU Long Ultra 30 End Mill, AH10

    LSU Long Ultra 30 End Mill, AH10

    ASAHI TOOLS

    Long lower neck . . . . Well suited for deep end mill machining. Uses G2 chip material for good suitability for cast iron and non-ferrous metals.

    ab
    105.75€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • End Mill Micro Edges for Super Fine Processing, NSME100

    End Mill Micro Edges for Super Fine Processing, NSME100

    NS TOOL

    Carbide accuracy specifications, blade diameter tolerance ± 2μm, shank tolerance H3 (roundness 0.1μm). 1 straight blade type

    • Mengenrabatt
    ab
    90.82€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • MUGEN Coating Lead 30 End Mill, 2 Flute

    MUGEN Coating Lead 30 End Mill, 2 Flute

    NS TOOL

    Standard type that corresponds perfectly regardless of the groove and side

    • Mengenrabatt
    ab
    12.52€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 3-Flute, for Steel / Aluminum Alloy, Short, CA-ETS

    3-Flute, for Steel / Aluminum Alloy, Short, CA-ETS

    OSG

    Great cutting sharpness and wide flutes that removes swarf swiftly contribute to fast, efficient grooving and side surface machining.

    • Mengenrabatt
    ab
    40.78€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 4-Flute, Extra Long, FX-MG-EXML

    4-Flute, Extra Long, FX-MG-EXML

    OSG

    General-purpose 4-flute end-mill super long blade type with heat resistant FX coating.

    • Mengenrabatt
    ab
    79.05€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Router Series for CFRP, Iris Melter DIA-DCR

    Router Series for CFRP, Iris Melter DIA-DCR

    OSG

    Diamond coated knurled head routers. End mill cutting edge.

    • Mengenrabatt
    ab
    84.45€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • X's Mill, Multi-Flutes, XSMT

    X's Mill, Multi-Flutes, XSMT

    NACHI(FUJIKOSHI)

    Ultra-high-speed and ultra-high-precision machining is possible due to adoption of multi-blade.

    ab
    477.96€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GSX MILL 4-Flute, 2D GSX4C-2D
    ab
    21.50€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SAC 2 Solid Long 2-Flute A-Cut End Mill MA

    SAC 2 Solid Long 2-Flute A-Cut End Mill MA

    ASAHI TOOLS

    Longer edge length than that of solid 2-edge A-cut EM; Ideal choice for deep notching and deep multi-diameter machining.

    ab
    65.21€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • MUGEN Coating 3 Flute End Mill

    MUGEN Coating 3 Flute End Mill

    NS TOOL

    Our original MUGEN-COATING has been applied to the 3-flute end mill. Reduced Cutting Resistance Compared to 30 ゜ Helix Angles

    • Mengenrabatt
    ab
    42.14€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • MUGEN Coating Lead 30 End Mill, 4 Flute

    MUGEN Coating Lead 30 End Mill, 4 Flute

    NS TOOL

    Standard Type Compatible with Anything

    • Mengenrabatt
    ab
    17.79€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • MUGEN Coating Lead 40 End Mill, 4 Flute

    MUGEN Coating Lead 40 End Mill, 4 Flute

    NS TOOL

    Deep and Smooth Processing, with Minimal Runout on the Processing Surface Despite the Long Flute

    • Mengenrabatt
    ab
    25.69€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond-Coated 2-Flute End Mills DCSE235

    Diamond-Coated 2-Flute End Mills DCSE235

    NS TOOL

    By adoption of its own diamond coating, exhibit a high durability against processing of graphite and high silicon aluminum alloy

    • Mengenrabatt
    ab
    88.28€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • MUGEN Premium Lead 30 End Mill 2 Flute MXH230

    MUGEN Premium Lead 30 End Mill 2 Flute MXH230

    NS TOOL

    Supports heat resistant alloys such as stainless steel and titanium. A standard lineup of almighty square end mills capable of grooving and cutting side surfaces

    • Mengenrabatt
    ab
    15.81€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • End Mill Micro Edges for Super Fine Processing, NSME230

    End Mill Micro Edges for Super Fine Processing, NSME230

    NS TOOL

    Carbide accuracy specifications, blade diameter tolerance ± 2μm, shank tolerance H3 (roundness 0.1μm).

    • Mengenrabatt
    ab
    73.72€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Square End Mill, 4 Flutes (Non-Coated)

    Square End Mill, 4 Flutes (Non-Coated)

    OKAZAKI SEIKO

    End mill that performs machining from non-ferrous material to steel., with abundant variety of blade sizes.

    ab
    21.29€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SP Series Square End Mill 4-Flute Coating OK

    SP Series Square End Mill 4-Flute Coating OK

    OKAZAKI SEIKO

    A 4-bladed OK coated end mill that can be used for materials ranging from green timber to stainless steel.

    ab
    13.74€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 2-Flute, Long FX-MG-EDL

    2-Flute, Long FX-MG-EDL

    OSG

    General-purpose 2-flute end-mill long blade type with heat resistant FX coating.

    • Mengenrabatt
    ab
    57.55€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

  • Flute Diameter (D)(φ)

    • 0.01~0.99
      • 0.01
      • 0.02
      • 0.03
      • 0.04
      • 0.05
      • 0.06
      • 0.07
      • 0.08
      • 0.09
      • 0.1
      • 0.11
      • 0.12
      • 0.13
      • 0.14
      • 0.15
      • 0.16
      • 0.17
      • 0.18
      • 0.19
      • 0.2
      • 0.21
      • 0.22
      • 0.23
      • 0.24
      • 0.25
      • 0.26
      • 0.27
      • 0.28
      • 0.29
      • 0.3
      • 0.31
      • 0.32
      • 0.33
      • 0.34
      • 0.35
      • 0.36
      • 0.37
      • 0.38
      • 0.39
      • 0.4
      • 0.41
      • 0.42
      • 0.43
      • 0.44
      • 0.45
      • 0.46
      • 0.47
      • 0.48
      • 0.49
      • 0.5
      • 0.51
      • 0.52
      • 0.53
      • 0.54
      • 0.55
      • 0.56
      • 0.57
      • 0.58
      • 0.59
      • 0.6
      • 0.61
      • 0.62
      • 0.63
      • 0.64
      • 0.65
      • 0.66
      • 0.67
      • 0.68
      • 0.69
      • 0.7
      • 0.71
      • 0.72
      • 0.73
      • 0.74
      • 0.75
      • 0.76
      • 0.77
      • 0.78
      • 0.79
      • 0.8
      • 0.81
      • 0.82
      • 0.83
      • 0.84
      • 0.85
      • 0.86
      • 0.87
      • 0.88
      • 0.89
      • 0.9
      • 0.91
      • 0.92
      • 0.93
      • 0.94
      • 0.95
      • 0.96
      • 0.97
      • 0.98
      • 0.99
    • 1~1.99
      • 1
      • 1.01
      • 1.02
      • 1.03
      • 1.04
      • 1.05
      • 1.06
      • 1.07
      • 1.08
      • 1.09
      • 1.1
      • 1.11
      • 1.12
      • 1.13
      • 1.14
      • 1.15
      • 1.16
      • 1.17
      • 1.18
      • 1.19
      • 1.2
      • 1.21
      • 1.22
      • 1.23
      • 1.24
      • 1.25
      • 1.26
      • 1.27
      • 1.28
      • 1.29
      • 1.3
      • 1.31
      • 1.32
      • 1.33
      • 1.34
      • 1.35
      • 1.36
      • 1.37
      • 1.38
      • 1.39
      • 1.4
      • 1.41
      • 1.42
      • 1.43
      • 1.44
      • 1.45
      • 1.46
      • 1.47
      • 1.48
      • 1.49
      • 1.5
      • 1.51
      • 1.52
      • 1.53
      • 1.54
      • 1.55
      • 1.56
      • 1.57
      • 1.58
      • 1.59
      • 1.6
      • 1.61
      • 1.62
      • 1.63
      • 1.64
      • 1.65
      • 1.66
      • 1.67
      • 1.68
      • 1.69
      • 1.7
      • 1.71
      • 1.72
      • 1.73
      • 1.74
      • 1.75
      • 1.76
      • 1.77
      • 1.78
      • 1.79
      • 1.8
      • 1.81
      • 1.82
      • 1.83
      • 1.84
      • 1.85
      • 1.86
      • 1.87
      • 1.88
      • 1.89
      • 1.9
      • 1.91
      • 1.92
      • 1.93
      • 1.94
      • 1.95
      • 1.96
      • 1.97
      • 1.98
      • 1.99
    • 2~2.99
      • 2
      • 2.01
      • 2.02
      • 2.03
      • 2.04
      • 2.05
      • 2.06
      • 2.07
      • 2.08
      • 2.09
      • 2.1
      • 2.11
      • 2.12
      • 2.13
      • 2.14
      • 2.15
      • 2.16
      • 2.17
      • 2.18
      • 2.19
      • 2.2
      • 2.21
      • 2.22
      • 2.23
      • 2.24
      • 2.25
      • 2.26
      • 2.27
      • 2.28
      • 2.29
      • 2.3
      • 2.31
      • 2.32
      • 2.33
      • 2.34
      • 2.35
      • 2.36
      • 2.37
      • 2.38
      • 2.39
      • 2.4
      • 2.41
      • 2.42
      • 2.43
      • 2.44
      • 2.45
      • 2.46
      • 2.47
      • 2.48
      • 2.49
      • 2.5
      • 2.51
      • 2.52
      • 2.53
      • 2.54
      • 2.55
      • 2.56
      • 2.57
      • 2.58
      • 2.59
      • 2.6
      • 2.61
      • 2.62
      • 2.63
      • 2.64
      • 2.65
      • 2.66
      • 2.67
      • 2.68
      • 2.69
      • 2.7
      • 2.71
      • 2.72
      • 2.73
      • 2.74
      • 2.75
      • 2.76
      • 2.77
      • 2.78
      • 2.79
      • 2.8
      • 2.81
      • 2.82
      • 2.83
      • 2.84
      • 2.85
      • 2.86
      • 2.87
      • 2.88
      • 2.89
      • 2.9
      • 2.91
      • 2.92
      • 2.93
      • 2.94
      • 2.95
      • 2.96
      • 2.97
      • 2.98
      • 2.99
    • 3~3.99
      • 3
      • 3.01
      • 3.02
      • 3.03
      • 3.04
      • 3.05
      • 3.06
      • 3.07
      • 3.08
      • 3.09
      • 3.1
      • 3.11
      • 3.12
      • 3.13
      • 3.14
      • 3.15
      • 3.16
      • 3.17
      • 3.175
      • 3.18
      • 3.19
      • 3.2
      • 3.21
      • 3.22
      • 3.23
      • 3.24
      • 3.25
      • 3.26
      • 3.27
      • 3.28
      • 3.29
      • 3.3
      • 3.31
      • 3.32
      • 3.33
      • 3.34
      • 3.35
      • 3.36
      • 3.37
      • 3.38
      • 3.39
      • 3.4
      • 3.41
      • 3.42
      • 3.43
      • 3.44
      • 3.45
      • 3.46
      • 3.47
      • 3.48
      • 3.49
      • 3.5
      • 3.51
      • 3.52
      • 3.53
      • 3.54
      • 3.55
      • 3.56
      • 3.57
      • 3.58
      • 3.59
      • 3.6
      • 3.61
      • 3.62
      • 3.63
      • 3.64
      • 3.65
      • 3.66
      • 3.67
      • 3.68
      • 3.69
      • 3.7
      • 3.71
      • 3.72
      • 3.73
      • 3.74
      • 3.75
      • 3.76
      • 3.77
      • 3.78
      • 3.79
      • 3.8
      • 3.81
      • 3.82
      • 3.83
      • 3.84
      • 3.85
      • 3.86
      • 3.87
      • 3.88
      • 3.89
      • 3.9
      • 3.91
      • 3.92
      • 3.93
      • 3.94
      • 3.95
      • 3.96
      • 3.97
      • 3.98
      • 3.99
    • 4~4.99
      • 4
      • 4.01
      • 4.02
      • 4.03
      • 4.04
      • 4.05
      • 4.06
      • 4.07
      • 4.08
      • 4.09
      • 4.1
      • 4.11
      • 4.12
      • 4.13
      • 4.14
      • 4.15
      • 4.16
      • 4.17
      • 4.18
      • 4.19
      • 4.2
      • 4.21
      • 4.22
      • 4.23
      • 4.24
      • 4.25
      • 4.26
      • 4.27
      • 4.28
      • 4.29
      • 4.3
      • 4.31
      • 4.32
      • 4.33
      • 4.34
      • 4.35
      • 4.36
      • 4.37
      • 4.38
      • 4.39
      • 4.4
      • 4.41
      • 4.42
      • 4.43
      • 4.44
      • 4.45
      • 4.46
      • 4.47
      • 4.48
      • 4.49
      • 4.5
      • 4.51
      • 4.52
      • 4.53
      • 4.54
      • 4.55
      • 4.56
      • 4.57
      • 4.58
      • 4.59
      • 4.6
      • 4.61
      • 4.62
      • 4.63
      • 4.64
      • 4.65
      • 4.66
      • 4.67
      • 4.68
      • 4.69
      • 4.7
      • 4.71
      • 4.72
      • 4.73
      • 4.74
      • 4.75
      • 4.76
      • 4.77
      • 4.78
      • 4.79
      • 4.8
      • 4.81
      • 4.82
      • 4.83
      • 4.84
      • 4.85
      • 4.86
      • 4.87
      • 4.88
      • 4.89
      • 4.9
      • 4.91
      • 4.92
      • 4.93
      • 4.94
      • 4.95
      • 4.96
      • 4.97
      • 4.98
      • 4.99
    • 5~5.99
      • 5
      • 5.01
      • 5.02
      • 5.03
      • 5.04
      • 5.05
      • 5.06
      • 5.07
      • 5.08
      • 5.09
      • 5.1
      • 5.11
      • 5.12
      • 5.13
      • 5.14
      • 5.15
      • 5.16
      • 5.17
      • 5.18
      • 5.19
      • 5.2
      • 5.21
      • 5.22
      • 5.23
      • 5.24
      • 5.25
      • 5.26
      • 5.27
      • 5.28
      • 5.29
      • 5.3
      • 5.31
      • 5.32
      • 5.33
      • 5.34
      • 5.35
      • 5.36
      • 5.37
      • 5.38
      • 5.39
      • 5.4
      • 5.41
      • 5.42
      • 5.43
      • 5.44
      • 5.45
      • 5.46
      • 5.47
      • 5.48
      • 5.49
      • 5.5
      • 5.51
      • 5.52
      • 5.53
      • 5.54
      • 5.55
      • 5.56
      • 5.57
      • 5.58
      • 5.59
      • 5.6
      • 5.61
      • 5.62
      • 5.63
      • 5.64
      • 5.65
      • 5.66
      • 5.67
      • 5.68
      • 5.69
      • 5.7
      • 5.71
      • 5.72
      • 5.73
      • 5.74
      • 5.75
      • 5.76
      • 5.77
      • 5.78
      • 5.79
      • 5.8
      • 5.81
      • 5.82
      • 5.83
      • 5.84
      • 5.85
      • 5.86
      • 5.87
      • 5.88
      • 5.89
      • 5.9
      • 5.91
      • 5.92
      • 5.93
      • 5.94
      • 5.95
      • 5.96
      • 5.97
      • 5.98
      • 5.99
    • 6~6.9
      • 6
      • 6 H
      • 6.1
      • 6.2
      • 6.3
      • 6.35
      • 6.4
      • 6.5
      • 6.6
      • 6.7
      • 6.8
      • 6.9
    • 7~7.99
      • 7
      • 7.01
      • 7.02
      • 7.03
      • 7.04
      • 7.05
      • 7.06
      • 7.07
      • 7.08
      • 7.09
      • 7.1
      • 7.11
      • 7.12
      • 7.13
      • 7.14
      • 7.15
      • 7.16
      • 7.17
      • 7.18
      • 7.19
      • 7.2
      • 7.21
      • 7.22
      • 7.23
      • 7.24
      • 7.25
      • 7.26
      • 7.27
      • 7.28
      • 7.29
      • 7.3
      • 7.31
      • 7.32
      • 7.33
      • 7.34
      • 7.35
      • 7.36
      • 7.37
      • 7.38
      • 7.39
      • 7.4
      • 7.41
      • 7.42
      • 7.43
      • 7.44
      • 7.45
      • 7.46
      • 7.47
      • 7.48
      • 7.49
      • 7.5
      • 7.51
      • 7.52
      • 7.53
      • 7.54
      • 7.55
      • 7.56
      • 7.57
      • 7.58
      • 7.59
      • 7.6
      • 7.61
      • 7.62
      • 7.63
      • 7.64
      • 7.65
      • 7.66
      • 7.67
      • 7.68
      • 7.69
      • 7.7
      • 7.71
      • 7.72
      • 7.73
      • 7.74
      • 7.75
      • 7.76
      • 7.77
      • 7.78
      • 7.79
      • 7.8
      • 7.81
      • 7.82
      • 7.83
      • 7.84
      • 7.85
      • 7.86
      • 7.87
      • 7.88
      • 7.89
      • 7.9
      • 7.91
      • 7.92
      • 7.93
      • 7.94
      • 7.95
      • 7.96
      • 7.97
      • 7.98
      • 7.99
    • 8~8.9
      • 8
      • 8 H
      • 8.1
      • 8.2
      • 8.3
      • 8.4
      • 8.5
      • 8.6
      • 8.7
      • 8.8
      • 8.9
    • 9~9.99
      • 9
      • 9.01
      • 9.02
      • 9.03
      • 9.04
      • 9.05
      • 9.06
      • 9.07
      • 9.08
      • 9.09
      • 9.1
      • 9.11
      • 9.12
      • 9.13
      • 9.14
      • 9.15
      • 9.16
      • 9.17
      • 9.18
      • 9.19
      • 9.2
      • 9.21
      • 9.22
      • 9.23
      • 9.24
      • 9.25
      • 9.26
      • 9.27
      • 9.28
      • 9.29
      • 9.3
      • 9.31
      • 9.32
      • 9.33
      • 9.34
      • 9.35
      • 9.36
      • 9.37
      • 9.38
      • 9.39
      • 9.4
      • 9.41
      • 9.42
      • 9.43
      • 9.44
      • 9.45
      • 9.46
      • 9.47
      • 9.48
      • 9.49
      • 9.5
      • 9.51
      • 9.52
      • 9.53
      • 9.54
      • 9.55
      • 9.56
      • 9.57
      • 9.58
      • 9.59
      • 9.6
      • 9.61
      • 9.62
      • 9.63
      • 9.64
      • 9.65
      • 9.66
      • 9.67
      • 9.68
      • 9.69
      • 9.7
      • 9.71
      • 9.72
      • 9.73
      • 9.74
      • 9.75
      • 9.76
      • 9.77
      • 9.78
      • 9.79
      • 9.8
      • 9.81
      • 9.82
      • 9.83
      • 9.84
      • 9.85
      • 9.86
      • 9.87
      • 9.88
      • 9.89
      • 9.9
      • 9.91
      • 9.92
      • 9.93
      • 9.94
      • 9.95
      • 9.96
      • 9.97
      • 9.98
      • 9.99
    • 10~10.9
      • 10
      • 10 H
      • 10.1
      • 10.2
      • 10.3
      • 10.4
      • 10.5
      • 10.6
      • 10.7
      • 10.8
      • 10.9
    • 11~11.99
      • 11
      • 11.01
      • 11.02
      • 11.03
      • 11.04
      • 11.05
      • 11.06
      • 11.07
      • 11.08
      • 11.09
      • 11.1
      • 11.11
      • 11.12
      • 11.13
      • 11.14
      • 11.15
      • 11.16
      • 11.17
      • 11.18
      • 11.19
      • 11.2
      • 11.21
      • 11.22
      • 11.23
      • 11.24
      • 11.25
      • 11.26
      • 11.27
      • 11.28
      • 11.29
      • 11.3
      • 11.31
      • 11.32
      • 11.33
      • 11.34
      • 11.35
      • 11.36
      • 11.37
      • 11.38
      • 11.39
      • 11.4
      • 11.41
      • 11.42
      • 11.43
      • 11.44
      • 11.45
      • 11.46
      • 11.47
      • 11.48
      • 11.49
      • 11.5
      • 11.51
      • 11.52
      • 11.53
      • 11.54
      • 11.55
      • 11.56
      • 11.57
      • 11.58
      • 11.59
      • 11.6
      • 11.61
      • 11.62
      • 11.63
      • 11.64
      • 11.65
      • 11.66
      • 11.67
      • 11.68
      • 11.69
      • 11.7
      • 11.71
      • 11.72
      • 11.73
      • 11.74
      • 11.75
      • 11.76
      • 11.77
      • 11.78
      • 11.79
      • 11.8
      • 11.81
      • 11.82
      • 11.83
      • 11.84
      • 11.85
      • 11.86
      • 11.87
      • 11.88
      • 11.89
      • 11.9
      • 11.91
      • 11.92
      • 11.93
      • 11.94
      • 11.95
      • 11.96
      • 11.97
      • 11.98
      • 11.99
    • 12~12.9
      • 12
      • 12 H
      • 12.1
      • 12.2
      • 12.3
      • 12.4
      • 12.5
      • 12.6
      • 12.7
      • 12.8
      • 12.9
    • 13~13.9
      • 13
      • 13.1
      • 13.2
      • 13.3
      • 13.4
      • 13.5
      • 13.6
      • 13.7
      • 13.8
      • 13.9
    • 14~14.9
      • 14
      • 14.1
      • 14.2
      • 14.3
      • 14.4
      • 14.5
      • 14.6
      • 14.7
      • 14.8
      • 14.9
    • 15~15.99
      • 15
      • 15.1
      • 15.2
      • 15.3
      • 15.4
      • 15.5
      • 15.51
      • 15.52
      • 15.53
      • 15.54
      • 15.55
      • 15.56
      • 15.57
      • 15.58
      • 15.59
      • 15.6
      • 15.61
      • 15.62
      • 15.63
      • 15.64
      • 15.65
      • 15.66
      • 15.67
      • 15.68
      • 15.69
      • 15.7
      • 15.71
      • 15.72
      • 15.73
      • 15.74
      • 15.75
      • 15.76
      • 15.77
      • 15.78
      • 15.79
      • 15.8
      • 15.81
      • 15.82
      • 15.83
      • 15.84
      • 15.85
      • 15.86
      • 15.87
      • 15.88
      • 15.89
      • 15.9
      • 15.91
      • 15.92
      • 15.93
      • 15.94
      • 15.95
      • 15.96
      • 15.97
      • 15.98
      • 15.99
    • 16~16.9
      • 16
      • 16.1
      • 16.2
      • 16.3
      • 16.4
      • 16.5
      • 16.6
      • 16.7
      • 16.8
      • 16.9
    • 17~17.9
      • 17
      • 17.1
      • 17.2
      • 17.3
      • 17.4
      • 17.5
      • 17.6
      • 17.7
      • 17.8
      • 17.9
    • 18~18.9
      • 18
      • 18.1
      • 18.2
      • 18.3
      • 18.4
      • 18.5
      • 18.6
      • 18.7
      • 18.8
      • 18.9
    • 19~19.99
      • 19
      • 19..5
      • 19.1
      • 19.2
      • 19.3
      • 19.4
      • 19.5
      • 19.51
      • 19.52
      • 19.53
      • 19.54
      • 19.55
      • 19.56
      • 19.57
      • 19.58
      • 19.59
      • 19.6
      • 19.61
      • 19.62
      • 19.63
      • 19.64
      • 19.65
      • 19.66
      • 19.67
      • 19.68
      • 19.69
      • 19.7
      • 19.71
      • 19.72
      • 19.73
      • 19.74
      • 19.75
      • 19.76
      • 19.77
      • 19.78
      • 19.79
      • 19.8
      • 19.81
      • 19.82
      • 19.83
      • 19.84
      • 19.85
      • 19.86
      • 19.87
      • 19.88
      • 19.89
      • 19.9
      • 19.91
      • 19.92
      • 19.93
      • 19.94
      • 19.95
      • 19.96
      • 19.97
      • 19.98
      • 19.99
    • 20~20.5
      • 20
      • 20.5
    • 21~21.5
      • 21
      • 21.5
    • 22~22.5
      • 22
      • 22.5
    • 23~23.5
      • 23
      • 23.5
    • 24~24.5
      • 24
      • 24.5
    • 25~25.5
      • 25
      • 25.5
    • 26~26.5
      • 26
      • 26.5
    • 27~27.5
      • 27
      • 27.5
    • 28~28.5
      • 28
      • 28.5
    • 29~29.5
      • 29
      • 29.5
    • 30
    • 31
    • 32
    • 33
    • 34
    • 35
    • 36
    • 37
    • 38
    • 39
    • 40
    • 41
    • 42
    • 43
    • 44
    • 45
    • 46
    • 47
    • 48
    • 49
    • 50
    • 51
    • 52
    • 53
    • 54
    • 55
    • 56
    • 57
    • 58
    • 59
    • 60
  • Work Material

  • Flute Length (ℓ)(mm)

    • 0.01~0.9
      • 0.01
      • 0.02
      • 0.03
      • 0.04
      • 0.045
      • 0.05
      • 0.06
      • 0.07
      • 0.075
      • 0.08
      • 0.09
      • 0.1
      • 0.105
      • 0.12
      • 0.135
      • 0.15
      • 0.16
      • 0.2
      • 0.23
      • 0.24
      • 0.25
      • 0.3
      • 0.32
      • 0.4
      • 0.45
      • 0.5
      • 0.55
      • 0.6
      • 0.65
      • 0.7
      • 0.75
      • 0.8
      • 0.9
    • 1~1.9
      • 1
      • 1.05
      • 1.1
      • 1.2
      • 1.25
      • 1.3
      • 1.35
      • 1.4
      • 1.5
      • 1.6
      • 1.7
      • 1.75
      • 1.8
      • 1.9
    • 2~2.9
      • 2
      • 2.1
      • 2.2
      • 2.25
      • 2.3
      • 2.4
      • 2.5
      • 2.6
      • 2.7
      • 2.8
      • 2.9
    • 3~3.9
      • 3
      • 3.1
      • 3.2
      • 3.3
      • 3.4
      • 3.5
      • 3.6
      • 3.7
      • 3.75
      • 3.8
      • 3.9
    • 4~4.9
      • 4
      • 4.1
      • 4.2
      • 4.3
      • 4.4
      • 4.5
      • 4.6
      • 4.7
      • 4.8
      • 4.9
    • 5~5.9
      • 5
      • 5.1
      • 5.2
      • 5.25
      • 5.3
      • 5.4
      • 5.5
      • 5.6
      • 5.7
      • 5.8
      • 5.9
    • 6~6.9
      • 6
      • 6.1
      • 6.2
      • 6.25
      • 6.3
      • 6.4
      • 6.5
      • 6.6
      • 6.7
      • 6.75
      • 6.8
      • 6.9
    • 7~7.9
      • 7
      • 7.1
      • 7.2
      • 7.3
      • 7.4
      • 7.5
      • 7.6
      • 7.7
      • 7.8
      • 7.9
    • 8~8.9
      • 8
      • 8.1
      • 8.2
      • 8.25
      • 8.3
      • 8.4
      • 8.5
      • 8.6
      • 8.7
      • 8.8
      • 8.9
    • 9~9.9
      • 9
      • 9.1
      • 9.2
      • 9.3
      • 9.4
      • 9.5
      • 9.6
      • 9.7
      • 9.8
      • 9.9
    • 10~10.9
      • 10
      • 10.1
      • 10.2
      • 10.3
      • 10.4
      • 10.5
      • 10.6
      • 10.7
      • 10.8
      • 10.9
    • 11~11.9
      • 11
      • 11.1
      • 11.2
      • 11.3
      • 11.4
      • 11.5
      • 11.6
      • 11.7
      • 11.8
      • 11.9
    • 12~12.9
      • 12
      • 12.2
      • 12.3
      • 12.4
      • 12.5
      • 12.6
      • 12.8
      • 12.9
    • 13~13.8
      • 13
      • 13.1
      • 13.2
      • 13.3
      • 13.4
      • 13.5
      • 13.6
      • 13.7
      • 13.8
    • 14~14.9
      • 14
      • 14.1
      • 14.2
      • 14.3
      • 14.4
      • 14.5
      • 14.6
      • 14.7
      • 14.8
      • 14.9
    • 15~15.9
      • 15
      • 15.2
      • 15.3
      • 15.4
      • 15.5
      • 15.6
      • 15.8
      • 15.9
    • 16~16.8
      • 16
      • 16.2
      • 16.4
      • 16.5
      • 16.6
      • 16.8
    • 17~17.8
      • 17
      • 17.1
      • 17.2
      • 17.3
      • 17.4
      • 17.5
      • 17.6
      • 17.7
      • 17.8
    • 18~18.9
      • 18
      • 18.2
      • 18.3
      • 18.4
      • 18.5
      • 18.6
      • 18.8
      • 18.9
    • 19~19.8
      • 19
      • 19.2
      • 19.4
      • 19.5
      • 19.6
      • 19.8
    • 20~20.8
      • 20
      • 20.1
      • 20.2
      • 20.3
      • 20.4
      • 20.5
      • 20.6
      • 20.7
      • 20.8
    • 21~21.9
      • 21
      • 21.2
      • 21.3
      • 21.4
      • 21.5
      • 21.6
      • 21.8
      • 21.9
    • 22~22.8
      • 22
      • 22.2
      • 22.4
      • 22.5
      • 22.6
      • 22.8
    • 23~23.8
      • 23
      • 23.1
      • 23.2
      • 23.3
      • 23.4
      • 23.5
      • 23.6
      • 23.7
      • 23.8
    • 24~24.9
      • 24
      • 24.3
      • 24.4
      • 24.5
      • 24.6
      • 24.8
      • 24.9
    • 25~25.8
      • 25
      • 25.2
      • 25.5
      • 25.6
      • 25.8
    • 26~26.8
      • 26
      • 26.1
      • 26.4
      • 26.5
      • 26.7
      • 26.8
    • 27~27.9
      • 27
      • 27.2
      • 27.3
      • 27.5
      • 27.6
      • 27.9
    • 28~28.8
      • 28
      • 28.2
      • 28.4
      • 28.5
      • 28.8
    • 29~29.7
      • 29
      • 29.1
      • 29.2
      • 29.4
      • 29.5
      • 29.6
      • 29.7
    • 30~30.9
      • 30
      • 30.3
      • 30.4
      • 30.5
      • 30.6
      • 30.8
      • 30.9
    • 31~31.8
      • 31
      • 31.2
      • 31.5
      • 31.6
      • 31.8
    • 32~32.8
      • 32
      • 32.1
      • 32.4
      • 32.5
      • 32.7
      • 32.8
    • 33~33.9
      • 33
      • 33.2
      • 33.3
      • 33.5
      • 33.6
      • 33.9
    • 34~34.8
      • 34
      • 34.2
      • 34.4
      • 34.5
      • 34.8
    • 35~35.7
      • 35
      • 35.1
      • 35.2
      • 35.4
      • 35.5
      • 35.6
      • 35.7
    • 36~36.8
      • 36
      • 36.4
      • 36.5
      • 36.8
    • 37~37.6
      • 37
      • 37.2
      • 37.5
      • 37.6
    • 38~38.8
      • 38
      • 38.4
      • 38.5
      • 38.8
    • 39~39.6
      • 39
      • 39.2
      • 39.5
      • 39.6
    • 40~40.8
      • 40
      • 40.4
      • 40.5
      • 40.8
    • 41~41.6
      • 41
      • 41.2
      • 41.5
      • 41.6
    • 42~42.8
      • 42
      • 42.4
      • 42.5
      • 42.8
    • 43~43.6
      • 43
      • 43.2
      • 43.5
      • 43.6
    • 44~44.8
      • 44
      • 44.4
      • 44.5
      • 44.8
    • 45~45.6
      • 45
      • 45.2
      • 45.5
      • 45.6
    • 46~46.8
      • 46
      • 46.4
      • 46.5
      • 46.8
    • 47~47.6
      • 47
      • 47.2
      • 47.5
      • 47.6
    • 48~48.5
      • 48
      • 48.5
    • 49~49.5
      • 49
      • 49.5
    • 50~50.5
      • 50
      • 50.5
    • 51~51.5
      • 51
      • 51.5
    • 52~52.5
      • 52
      • 52.5
    • 53~53.5
      • 53
      • 53.5
    • 54~54.5
      • 54
      • 54.5
    • 55~55.5
      • 55
      • 55.5
    • 56~56.5
      • 56
      • 56.5
    • 57~57.5
      • 57
      • 57.5
    • 58~58.5
      • 58
      • 58.5
    • 59~59.5
      • 59
      • 59.5
    • 60
    • 62
    • 63
    • 64
    • 65
    • 66
    • 67
    • 70
    • 72
    • 75
    • 76
    • 78
    • 80
    • 82
    • 83
    • 85
    • 88
    • 90
    • 95
    • 100
    • 103
    • 106
    • 110
    • 112
    • 115
    • 120
    • 125
    • 130
    • 150
    • 200
    [4-90/1mm-Schritte]
  • Number of Flutes(Pieces)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 10
    • 12
    • 14
  • Model

  • Coating

  • Link Diameter (d)(mm)

    • 1
    • 1.5
    • 2
    • 3
    • 3.175
    • 4
    • 5
    • 5.8
    • 6
    • 6.35
    • 6.8
    • 7
    • 7.8
    • 8
    • 8.8
    • 9
    • 9.8
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
    • 17
    • 18
    • 20
    • 22
    • 24
    • 25
    • 30
    • 32
    • 42
  • Overall Length (L)(mm)

    • 35
    • 38
    • 38.1
    • 40
    • 45
    • 48
    • 49
    • 50
    • 52
    • 53
    • 54
    • 55
    • 57
    • 58
    • 60
    • 62
    • 63
    • 63.5
    • 64
    • 65
    • 66
    • 68
    • 69
    • 70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 80
    • 82
    • 83
    • 84
    • 85
    • 86
    • 87
    • 88
    • 89
    • 90
    • 92
    • 95
    • 96
    • 97
    • 100
    • 104
    • 105
    • 106
    • 107
    • 109
    • 110
    • 111
    • 113
    • 115
    • 116
    • 118
    • 120
    • 121
    • 123
    • 125
    • 128
    • 130
    • 132
    • 135
    • 136
    • 140
    • 145
    • 150
    • 155
    • 160
    • 165
    • 166
    • 170
    • 175
    • 180
    • 185
    • 190
    • 200
    • 205
    • 210
    • 215
    • 220
    • 225
    • 230
    • 240
    • 250
    • 260
    • 265
    • 270
    • 280
    • 300
    • 310
    • 320
    • 350
    • 800
  • Length Under Neck (ℓ1)(mm)

    • 0.1~0.8
      • 0.1
      • 0.2
      • 0.3
      • 0.4
      • 0.5
      • 0.6
      • 0.75
      • 0.8
    • 1~1.9
      • 1
      • 1.2
      • 1.25
      • 1.4
      • 1.5
      • 1.6
      • 1.7
      • 1.8
      • 1.9
    • 2~2.8
      • 2
      • 2.4
      • 2.5
      • 2.8
    • 3~3.8
      • 3
      • 3.2
      • 3.3
      • 3.5
      • 3.8
    • 4~4.8
      • 4
      • 4.5
      • 4.7
      • 4.8
    • 5~5.5
      • 5
      • 5.5
    • 6~6.8
      • 6
      • 6.5
      • 6.8
    • 7~7.5
      • 7
      • 7.2
      • 7.3
      • 7.5
    • 8~8.5
      • 8
      • 8.3
      • 8.5
    • 9~9.5
      • 9
      • 9.5
    • 10~10.5
      • 10
      • 10.3
      • 10.5
    • 11~11.5
      • 11
      • 11.5
    • 12~12.8
      • 12
      • 12.5
      • 12.8
    • 13~13.5
      • 13
      • 13.5
    • 14~14.5
      • 14
      • 14.5
    • 15
    • 16~16.5
      • 16
      • 16.5
    • 17~17.5
      • 17
      • 17.5
    • 18
    • 19.6
    • 20
    • 21~21.5
      • 21
      • 21.1
      • 21.5
    • 22
    • 23
    • 24~24.1
      • 24
      • 24.1
    • 25
    • 26
    • 27
    • 28
    • 29
    • 30~30.5
      • 30
      • 30.5
    • 31.5
    • 32
    • 33~33.5
      • 33
      • 33.5
    • 34
    • 35
    • 36
    • 37~37.5
      • 37
      • 37.5
    • 38
    • 39
    • 40
    • 41
    • 42
    • 45
    • 47
    • 48
    • 50
    • 52
    • 53
    • 55
    • 57
    • 60
    • 63
    • 64
    • 65
    • 66
    • 70
    • 75
    • 80
    • 82
    • 85
    • 90
    • 100
    • 108
    • 110
    • 120
    • 125
    • 130
    • 140
    • 150
    • 200
    [8-140/1mm-Schritte]
  • Processing Applications

  • Flute Shape

  • Torsion Angle (θ)

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen