• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Rechteckfräser (Hartmetall)(Seite9)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • 12 Tage oder weniger
  • 33 Tage oder weniger
  • X's Mill, Geo Long Shank, 4GEOLS

    X's Mill, Geo Long Shank, 4GEOLS

    NACHI(FUJIKOSHI)

    Can perform high precision machining even during deep carving.

    ab
    56.55€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • X'S Mill Geo Kovar 2 Blades 2GEOKV

    X'S Mill Geo Kovar 2 Blades 2GEOKV

    NACHI(FUJIKOSHI)

    Suitable for machining kovar material used in IT components while inhibiting burring. Suitable for grooving.

    ab
    25.54€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GSX MILL Slot 1.5D GSXSLT-1.5D

    GSX MILL Slot 1.5D GSXSLT-1.5D

    NACHI(FUJIKOSHI)

    Can go from drilling holes to grooving in continuous high efficiency machining. Well suited for small machines and thin lamenates with weak clamping force.

    ab
    28.22€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • ZX Coated, UP MILL, Slot, Model SSUP3000ZX

    ZX Coated, UP MILL, Slot, Model SSUP3000ZX

    SUMITOMO ELECTRIC HARDMETAL

    Adoption of ZX coating achieves hardness similar to CBN sintering and improves wear resistance, oxidation resistance, peel resistance. Lifespan is about 6 times more compared to non-coated product.

    ab
    58.22€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • ZX Coated, High Lead End Mill, Model HSM2000ZX

    ZX Coated, High Lead End Mill, Model HSM2000ZX

    SUMITOMO ELECTRIC HARDMETAL

    Adoption of ZX coating achieves hardness similar to CBN sintering and improves wear resistance, oxidation resistance, peel resistance. Lifespan is about 6 times more compared to non-coated product.

    ab
    58.39€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • ZX Coated, High Lead End Mill, Model HSM3000ZX

    ZX Coated, High Lead End Mill, Model HSM3000ZX

    SUMITOMO ELECTRIC HARDMETAL

    Adoption of ZX coating achieves hardness similar to CBN sintering and improves wear resistance, oxidation resistance, peel resistance. Lifespan is about 6 times more compared to non-coated product.

    ab
    80.59€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • ZX Coated, High Lead End Mill, Model HSM4000ZX

    ZX Coated, High Lead End Mill, Model HSM4000ZX

    SUMITOMO ELECTRIC HARDMETAL

    Adoption of ZX coating achieves hardness similar to CBN sintering and improves wear resistance, oxidation resistance, peel resistance. Lifespan is about 6 times more compared to non-coated product.

    ab
    399.75€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • ZX Coated, UPMILL, Model SSUP4000ZX

    ZX Coated, UPMILL, Model SSUP4000ZX

    SUMITOMO ELECTRIC HARDMETAL

    Adoption of ZX coating achieves hardness similar to CBN sintering and improves wear resistance, oxidation resistance, peel resistance. Lifespan is about 6 times more compared to non-coated product.

    ab
    58.22€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • ZX Deep Coat UPMILL SSUPR4000ZX Type

    ZX Deep Coat UPMILL SSUPR4000ZX Type

    SUMITOMO ELECTRIC HARDMETAL

    Adoption of ZX coating achieves hardness similar to CBN sintering and improves wear resistance, oxidation resistance, peel resistance. Lifespan is about 6 times more compared to non-coated product.

    ab
    70.53€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GSX MILL 2-Flute End Mill GSX20000C-4D Type

    GSX MILL 2-Flute End Mill GSX20000C-4D Type

    SUMITOMO ELECTRIC HARDMETAL

    Improves reliability of wet machining due to adoption of super-hard base metal particles superior to high transverse rupture strength and thermal shock resistance. Improved reliability and lifetime due to adoption of GSX coating with enhanced wear resistance and heat resistance.

    ab
    25.13€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GSX MILL 3-Flute Slot End Mill GSXSLT30000C-1.5D

    GSX MILL 3-Flute Slot End Mill GSXSLT30000C-1.5D

    SUMITOMO ELECTRIC HARDMETAL

    Improves reliability of wet machining due to adoption of super-hard base metal particles superior to high transverse rupture strength and thermal shock resistance. Improved reliability and lifetime due to adoption of GSX coating with enhanced wear resistance and heat resistance.

    ab
    29.69€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • ZX Coated, Spiral End Mill (JIS Standard), Model JSM4000ZX

    ZX Coated, Spiral End Mill (JIS Standard), Model JSM4000ZX

    SUMITOMO ELECTRIC HARDMETAL

    Adoption of ZX coating achieves hardness similar to CBN sintering and improves wear resistance, oxidation resistance, peel resistance. Lifespan is about 6 times more compared to non-coated product.

    ab
    51.21€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • ZX Coated, Spiral End Mill, Model SSM20000ZX

    ZX Coated, Spiral End Mill, Model SSM20000ZX

    SUMITOMO ELECTRIC HARDMETAL

    Good cutting qualities and superior cutting debris removal. Standard type suitable to wide ranging applications from finishing to general machining.

    ab
    37.79€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Long Solid Spiral End Mills, LSM2000 Type

    Long Solid Spiral End Mills, LSM2000 Type

    SUMITOMO ELECTRIC HARDMETAL

    Long type SSM models. The blade length makes a long and deep cut possible.

    ab
    40.41€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • ZX Coated, Spiral Long End Mill, Model LSM2000ZX

    ZX Coated, Spiral Long End Mill, Model LSM2000ZX

    SUMITOMO ELECTRIC HARDMETAL

    Long type SSM-ZX model. The blade length makes a long and deep cut possible.

    ab
    54.67€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • ZX Coated, Long Hard End Mill, Model LHHM4000ZX

    ZX Coated, Long Hard End Mill, Model LHHM4000ZX

    SUMITOMO ELECTRIC HARDMETAL

    Long blade type HHM-ZX model. A rigid end mill with a long flute length that allows for high accuracy processing of deep steps.

    ab
    54.75€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • ZX Coated, Long Hard End Mill, Model LHHM6000ZX

    ZX Coated, Long Hard End Mill, Model LHHM6000ZX

    SUMITOMO ELECTRIC HARDMETAL

    Long blade type HHM-ZX model. A rigid end mill with a long flute length that allows for high accuracy processing of deep steps.

    ab
    65.81€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Solid End Mill for Non-Ferrous Metals ASM2000 Type

    Solid End Mill for Non-Ferrous Metals ASM2000 Type

    SUMITOMO ELECTRIC HARDMETAL

    Square end-mill for aluminum processing. Innovation of cross-sectional shape improves chip dischargeability greatly. End-mill suitable for cutting aluminum and copper.

    ab
    49.52€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GSX MILL, 4-Flute End Mill, GSX40000C-1.5D Type

    GSX MILL, 4-Flute End Mill, GSX40000C-1.5D Type

    SUMITOMO ELECTRIC HARDMETAL

    Improves reliability of wet machining due to adoption of super-hard base metal particles superior to high transverse rupture strength and thermal shock resistance. Improved reliability and lifetime due to adoption of GSX coating with enhanced wear resistance and heat resistance.

    ab
    22.51€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Lead 30 End Mills

    Lead 30 End Mills

    NS TOOL

    The Flute Length is Double the Flute Diameter with a 30° Helix Angle Can Perform Multi-Purpose Cutting from Coarse to Finish

    ab
    23.05€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • MUGEN Coating Flute Diameter Display 2 Flute End Mill

    MUGEN Coating Flute Diameter Display 2 Flute End Mill

    NS TOOL

    Blade diameter is display in units of 1 micron

    ab
    20.42€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • MUGEN Coating Lead 25 End Mill, 4 Flute

    MUGEN Coating Lead 25 End Mill, 4 Flute

    NS TOOL

    design with enhanced rigidity for minimized chatter and runout during grooving

    ab
    19.76€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • X Coated, Lead 30 End Mill, NX-30X

    X Coated, Lead 30 End Mill, NX-30X

    NS TOOL

    Shaves tempered steel up to 50-70 HRC. Run-Out Accuracy is in Microns

    ab
    31.67€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • CBN Square End Mill SSE400

    CBN Square End Mill SSE400

    NS TOOL

    Allows machining of corner edges in high hardness material Adopted unique multi-blade design increases wear resistance

    ab
    158.78€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • MUGEN Premium Sharp Corner Lead 25 End Mill 2 Flute MXH225P

    MUGEN Premium Sharp Corner Lead 25 End Mill 2 Flute MXH225P

    NS TOOL

    Supports heat resistant alloys such as stainless steel and titanium. Blade length is of equal magnification as blade diameter, with a 25° helix angle.

    ab
    15.81€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Soldering Square End Mills, 6-Flute Non-Coated

    Soldering Square End Mills, 6-Flute Non-Coated

    OKAZAKI SEIKO

    By ultra-fine chip (Z-10), wide range of machining can be done from cast iron up to steel.

    • Mengenrabatt
    ab
    343.76€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Medium Square End Mills, 4-Flute Non-Coated

    Medium Square End Mills, 4-Flute Non-Coated

    OKAZAKI SEIKO

    Medium length edges allow deeper machining.

    • Mengenrabatt
    ab
    24.04€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Medium Square End Mills, 4-Flute OK-Coated

    Medium Square End Mills, 4-Flute OK-Coated

    OKAZAKI SEIKO

    Medium length edges allow deeper machining; 4-edge OK coat end mills.

    • Mengenrabatt
    ab
    32.97€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEE4VA <Vibration Control Mill> 4-Flute, Coating OK

    SEE4VA 4-Flute, Coating OK

    OKAZAKI SEIKO

    End mill where chatter can be significantly suppressed by adopting unequal spacing shape

    • Mengenrabatt
    ab
    30.91€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 2-Flute, Stub Shape, FX-MG-EDSS

    2-Flute, Stub Shape, FX-MG-EDSS

    OSG

    Ultra-short blade with blade length 1.5 times the blade diameter, Ideal for high-speed machining with high-speed machining center.

    ab
    61.38€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 2-Flute, for Steel / Aluminum Alloy / Plus Check (HSK Compatible) CRN-HS-EDS

    2-Flute, for Steel / Aluminum Alloy / Plus Check (HSK Compatible) CRN-HS-EDS

    OSG

    A minimum tool protrusion amount can be set with 2-plane binding HSK holder. Suitable for high-speed mass production of copper electrodes.

    • Mengenrabatt
    ab
    61.87€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 3-Flute, Short, DLC-ETS

    3-Flute, Short, DLC-ETS

    OSG

    Its own ultra-smooth new DLC coating prevents welding. Achieves high-speed high-efficiency machining in aircraft aluminum parts.

    • Mengenrabatt
    ab
    56.43€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 4-Flute, Stub Shape, FX-MG-EMSS

    4-Flute, Stub Shape, FX-MG-EMSS

    OSG

    Ultra-short blade with blade length 1.5 times the blade diameter, Ideal for high-speed machining with high-speed machining center.

    ab
    70.14€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 4-Flute Long Shank for Graphite, Regular Type, GF-LS-EMR

    4-Flute Long Shank for Graphite, Regular Type, GF-LS-EMR

    OSG

    Cemented carbide with superior abrasion resistance adopted as a base material. Achieves long-life graphite processing.

    • Mengenrabatt
    ab
    114.56€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SA Coated Carbide 4-Flute Short Blade

    SA Coated Carbide 4-Flute Short Blade

    SANKO MFG

    Can process materials ranging from green wood to hardened steel. General purpose 4 bladed type with a sharp edge configuration.

    • Mengenrabatt
    ab
    43.51€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Solid End Mill OCFS2-M Shape

    Solid End Mill OCFS2-M Shape

    DIJET

    Cemented carbide with superior abrasion resistance adopted as a base material. Achieves long-life graphite processing.

    ab
    55.49€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Solid End Mill OCFS4-S Shape

    Solid End Mill OCFS4-S Shape

    DIJET

    Cemented carbide with superior abrasion resistance adopted as a base material. Achieves long-life graphite processing.

    ab
    49.32€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Beam End Mills (for Aluminum) VN-ALES2 Type

    Beam End Mills (for Aluminum) VN-ALES2 Type

    DIJET

    Demonstrates long tool lif, due to ultrafine cemented carbide with excellent wear resistance.

    ab
    471.75€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Welded Edge End Mills, DZ-OCPS

    Welded Edge End Mills, DZ-OCPS

    DIJET

    Demonstrates long tool lif, due to ultrafine cemented carbide with excellent wear resistance.

    ab
    44.70€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Graphite Solid End Mill 4 Flute Long Type

    Carbide Graphite Solid End Mill 4 Flute Long Type

    EIKOSHA

    Graphite Electrode Processing Long Hilt

    ab
    139.17€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Air Hole End Mill, 4-Flute, Standard Type

    Carbide Air Hole End Mill, 4-Flute, Standard Type

    EIKOSHA

    Graphite Electrode Processing With Air Hole

    ab
    55.50€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Importance to Precision / Surface Finishing 2 Flute Sharp Corner 2FESS (Short)

    Importance to Precision / Surface Finishing 2 Flute Sharp Corner 2FESS (Short)

    KYOCERA

    The sharp cutting edge keeps burrs to a minimum.

    ab
    17.04€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Importance to Precision / Surface Finishing 2 Flute Strong Cutting Edge Type 2FEKS (Short)

    Importance to Precision / Surface Finishing 2 Flute Strong Cutting Edge Type 2FEKS (Short)

    KYOCERA

    Burrs are suppressed using the abrasion- and heat-resistant MEGACOAT coating, together with a high-grade cutting edge, to allow machining to be carried out with high accuracy.

    ab
    21.85€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Importance to Precision / Surface Finishing 2 Flute Strong Cutting Edge Type 2FEKM (Medium)

    Importance to Precision / Surface Finishing 2 Flute Strong Cutting Edge Type 2FEKM (Medium)

    KYOCERA

    Achieves high precision machining by preventing burring through a high quality blade tip and a high abrasion and heat resistant coating MEGACOAT.

    ab
    21.85€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Importance to Precision / Surface Finishing 4FEKM

    Importance to Precision / Surface Finishing 4FEKM

    KYOCERA

    Can simultaneously drill and chamfer.

    ab
    25.97€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

  • Blade diameter (D)(φ)

    • 0.01~0.95
      • 0.01
      • 0.02
      • 0.03
      • 0.04
      • 0.05
      • 0.06
      • 0.07
      • 0.08
      • 0.09
      • 0.1
      • 0.15
      • 0.2
      • 0.25
      • 0.3
      • 0.35
      • 0.4
      • 0.45
      • 0.5
      • 0.55
      • 0.6
      • 0.65
      • 0.7
      • 0.75
      • 0.8
      • 0.85
      • 0.9
      • 0.95
    • 1~1.99
      • 1
      • 1.05
      • 1.1
      • 1.15
      • 1.2
      • 1.25
      • 1.3
      • 1.35
      • 1.4
      • 1.45
      • 1.5
      • 1.55
      • 1.6
      • 1.65
      • 1.7
      • 1.75
      • 1.8
      • 1.85
      • 1.9
      • 1.91
      • 1.92
      • 1.93
      • 1.94
      • 1.95
      • 1.96
      • 1.97
      • 1.98
      • 1.99
    • 2~2.99
      • 2
      • 2.05
      • 2.1
      • 2.15
      • 2.2
      • 2.25
      • 2.26
      • 2.27
      • 2.28
      • 2.29
      • 2.3
      • 2.31
      • 2.32
      • 2.33
      • 2.34
      • 2.35
      • 2.36
      • 2.37
      • 2.38
      • 2.39
      • 2.4
      • 2.41
      • 2.42
      • 2.43
      • 2.44
      • 2.45
      • 2.46
      • 2.47
      • 2.48
      • 2.49
      • 2.5
      • 2.51
      • 2.52
      • 2.53
      • 2.54
      • 2.55
      • 2.56
      • 2.57
      • 2.58
      • 2.59
      • 2.6
      • 2.61
      • 2.62
      • 2.63
      • 2.64
      • 2.65
      • 2.66
      • 2.67
      • 2.68
      • 2.69
      • 2.7
      • 2.71
      • 2.72
      • 2.73
      • 2.74
      • 2.75
      • 2.76
      • 2.77
      • 2.78
      • 2.79
      • 2.8
      • 2.81
      • 2.82
      • 2.83
      • 2.84
      • 2.85
      • 2.86
      • 2.87
      • 2.88
      • 2.89
      • 2.9
      • 2.91
      • 2.92
      • 2.93
      • 2.94
      • 2.95
      • 2.96
      • 2.97
      • 2.98
      • 2.99
    • 3~3.99
      • 3
      • 3.01
      • 3.02
      • 3.03
      • 3.04
      • 3.05
      • 3.06
      • 3.07
      • 3.08
      • 3.09
      • 3.1
      • 3.11
      • 3.12
      • 3.13
      • 3.14
      • 3.15
      • 3.16
      • 3.17
      • 3.175
      • 3.18
      • 3.19
      • 3.2
      • 3.21
      • 3.22
      • 3.23
      • 3.24
      • 3.25
      • 3.26
      • 3.27
      • 3.28
      • 3.29
      • 3.3
      • 3.31
      • 3.32
      • 3.33
      • 3.34
      • 3.35
      • 3.36
      • 3.37
      • 3.38
      • 3.39
      • 3.4
      • 3.41
      • 3.42
      • 3.43
      • 3.44
      • 3.45
      • 3.46
      • 3.47
      • 3.48
      • 3.49
      • 3.5
      • 3.51
      • 3.52
      • 3.53
      • 3.54
      • 3.55
      • 3.56
      • 3.57
      • 3.58
      • 3.59
      • 3.6
      • 3.61
      • 3.62
      • 3.63
      • 3.64
      • 3.65
      • 3.66
      • 3.67
      • 3.68
      • 3.69
      • 3.7
      • 3.71
      • 3.72
      • 3.73
      • 3.74
      • 3.75
      • 3.76
      • 3.77
      • 3.78
      • 3.79
      • 3.8
      • 3.81
      • 3.82
      • 3.83
      • 3.84
      • 3.85
      • 3.86
      • 3.87
      • 3.88
      • 3.89
      • 3.9
      • 3.91
      • 3.92
      • 3.93
      • 3.94
      • 3.95
      • 3.96
      • 3.97
      • 3.98
      • 3.99
    • 4~4.99
      • 4
      • 4.01
      • 4.02
      • 4.03
      • 4.04
      • 4.05
      • 4.06
      • 4.07
      • 4.08
      • 4.09
      • 4.1
      • 4.11
      • 4.12
      • 4.13
      • 4.14
      • 4.15
      • 4.16
      • 4.17
      • 4.18
      • 4.19
      • 4.2
      • 4.21
      • 4.22
      • 4.23
      • 4.24
      • 4.25
      • 4.26
      • 4.27
      • 4.28
      • 4.29
      • 4.3
      • 4.31
      • 4.32
      • 4.33
      • 4.34
      • 4.35
      • 4.36
      • 4.37
      • 4.38
      • 4.39
      • 4.4
      • 4.41
      • 4.42
      • 4.43
      • 4.44
      • 4.45
      • 4.46
      • 4.47
      • 4.48
      • 4.49
      • 4.5
      • 4.51
      • 4.52
      • 4.53
      • 4.54
      • 4.55
      • 4.56
      • 4.57
      • 4.58
      • 4.59
      • 4.6
      • 4.61
      • 4.62
      • 4.63
      • 4.64
      • 4.65
      • 4.66
      • 4.67
      • 4.68
      • 4.69
      • 4.7
      • 4.71
      • 4.72
      • 4.73
      • 4.74
      • 4.75
      • 4.76
      • 4.77
      • 4.78
      • 4.79
      • 4.8
      • 4.81
      • 4.82
      • 4.83
      • 4.84
      • 4.85
      • 4.86
      • 4.87
      • 4.88
      • 4.89
      • 4.9
      • 4.91
      • 4.92
      • 4.93
      • 4.94
      • 4.95
      • 4.96
      • 4.97
      • 4.98
      • 4.99
    • 5~5.99
      • 5
      • 5.01
      • 5.02
      • 5.03
      • 5.04
      • 5.05
      • 5.06
      • 5.07
      • 5.08
      • 5.09
      • 5.1
      • 5.11
      • 5.12
      • 5.13
      • 5.14
      • 5.15
      • 5.16
      • 5.17
      • 5.18
      • 5.19
      • 5.2
      • 5.21
      • 5.22
      • 5.23
      • 5.24
      • 5.25
      • 5.26
      • 5.27
      • 5.28
      • 5.29
      • 5.3
      • 5.31
      • 5.32
      • 5.33
      • 5.34
      • 5.35
      • 5.36
      • 5.37
      • 5.38
      • 5.39
      • 5.4
      • 5.41
      • 5.42
      • 5.43
      • 5.44
      • 5.45
      • 5.46
      • 5.47
      • 5.48
      • 5.49
      • 5.5
      • 5.51
      • 5.52
      • 5.53
      • 5.54
      • 5.55
      • 5.56
      • 5.57
      • 5.58
      • 5.59
      • 5.6
      • 5.61
      • 5.62
      • 5.63
      • 5.64
      • 5.65
      • 5.66
      • 5.67
      • 5.68
      • 5.69
      • 5.7
      • 5.71
      • 5.72
      • 5.73
      • 5.74
      • 5.75
      • 5.76
      • 5.77
      • 5.78
      • 5.79
      • 5.8
      • 5.81
      • 5.82
      • 5.83
      • 5.84
      • 5.85
      • 5.86
      • 5.87
      • 5.88
      • 5.89
      • 5.9
      • 5.91
      • 5.92
      • 5.93
      • 5.94
      • 5.95
      • 5.96
      • 5.97
      • 5.98
      • 5.99
    • 6~6.9
      • 6
      • 6H
      • 6.1
      • 6.2
      • 6.3
      • 6.35
      • 6.4
      • 6.5
      • 6.6
      • 6.7
      • 6.8
      • 6.9
    • 7~7.99
      • 7
      • 7.01
      • 7.02
      • 7.03
      • 7.04
      • 7.05
      • 7.06
      • 7.07
      • 7.08
      • 7.09
      • 7.1
      • 7.11
      • 7.12
      • 7.13
      • 7.14
      • 7.15
      • 7.16
      • 7.17
      • 7.18
      • 7.19
      • 7.2
      • 7.21
      • 7.22
      • 7.23
      • 7.24
      • 7.25
      • 7.26
      • 7.27
      • 7.28
      • 7.29
      • 7.3
      • 7.31
      • 7.32
      • 7.33
      • 7.34
      • 7.35
      • 7.36
      • 7.37
      • 7.38
      • 7.39
      • 7.4
      • 7.41
      • 7.42
      • 7.43
      • 7.44
      • 7.45
      • 7.46
      • 7.47
      • 7.48
      • 7.49
      • 7.5
      • 7.51
      • 7.52
      • 7.53
      • 7.54
      • 7.55
      • 7.56
      • 7.57
      • 7.58
      • 7.59
      • 7.6
      • 7.61
      • 7.62
      • 7.63
      • 7.64
      • 7.65
      • 7.66
      • 7.67
      • 7.68
      • 7.69
      • 7.7
      • 7.71
      • 7.72
      • 7.73
      • 7.74
      • 7.75
      • 7.76
      • 7.77
      • 7.78
      • 7.79
      • 7.8
      • 7.81
      • 7.82
      • 7.83
      • 7.84
      • 7.85
      • 7.86
      • 7.87
      • 7.88
      • 7.89
      • 7.9
      • 7.91
      • 7.92
      • 7.93
      • 7.94
      • 7.95
      • 7.96
      • 7.97
      • 7.98
      • 7.99
    • 8~8.9
      • 8
      • 8H
      • 8.1
      • 8.2
      • 8.3
      • 8.4
      • 8.5
      • 8.6
      • 8.7
      • 8.8
      • 8.9
    • 9~9.99
      • 9
      • 9.01
      • 9.02
      • 9.03
      • 9.04
      • 9.05
      • 9.06
      • 9.07
      • 9.08
      • 9.09
      • 9.1
      • 9.11
      • 9.12
      • 9.13
      • 9.14
      • 9.15
      • 9.16
      • 9.17
      • 9.18
      • 9.19
      • 9.2
      • 9.21
      • 9.22
      • 9.23
      • 9.24
      • 9.25
      • 9.26
      • 9.27
      • 9.28
      • 9.29
      • 9.3
      • 9.31
      • 9.32
      • 9.33
      • 9.34
      • 9.35
      • 9.36
      • 9.37
      • 9.38
      • 9.39
      • 9.4
      • 9.41
      • 9.42
      • 9.43
      • 9.44
      • 9.45
      • 9.46
      • 9.47
      • 9.48
      • 9.49
      • 9.5
      • 9.51
      • 9.52
      • 9.53
      • 9.54
      • 9.55
      • 9.56
      • 9.57
      • 9.58
      • 9.59
      • 9.6
      • 9.61
      • 9.62
      • 9.63
      • 9.64
      • 9.65
      • 9.66
      • 9.67
      • 9.68
      • 9.69
      • 9.7
      • 9.71
      • 9.72
      • 9.73
      • 9.74
      • 9.75
      • 9.76
      • 9.77
      • 9.78
      • 9.79
      • 9.8
      • 9.81
      • 9.82
      • 9.83
      • 9.84
      • 9.85
      • 9.86
      • 9.87
      • 9.88
      • 9.89
      • 9.9
      • 9.91
      • 9.92
      • 9.93
      • 9.94
      • 9.95
      • 9.96
      • 9.97
      • 9.98
      • 9.99
    • 10~10.9
      • 10
      • 10H
      • 10.1
      • 10.2
      • 10.3
      • 10.4
      • 10.5
      • 10.6
      • 10.7
      • 10.8
      • 10.9
    • 11~11.99
      • 11
      • 11.01
      • 11.02
      • 11.03
      • 11.04
      • 11.05
      • 11.06
      • 11.07
      • 11.08
      • 11.09
      • 11.1
      • 11.11
      • 11.12
      • 11.13
      • 11.14
      • 11.15
      • 11.16
      • 11.17
      • 11.18
      • 11.19
      • 11.2
      • 11.21
      • 11.22
      • 11.23
      • 11.24
      • 11.25
      • 11.26
      • 11.27
      • 11.28
      • 11.29
      • 11.3
      • 11.31
      • 11.32
      • 11.33
      • 11.34
      • 11.35
      • 11.36
      • 11.37
      • 11.38
      • 11.39
      • 11.4
      • 11.41
      • 11.42
      • 11.43
      • 11.44
      • 11.45
      • 11.46
      • 11.47
      • 11.48
      • 11.49
      • 11.5
      • 11.51
      • 11.52
      • 11.53
      • 11.54
      • 11.55
      • 11.56
      • 11.57
      • 11.58
      • 11.59
      • 11.6
      • 11.61
      • 11.62
      • 11.63
      • 11.64
      • 11.65
      • 11.66
      • 11.67
      • 11.68
      • 11.69
      • 11.7
      • 11.71
      • 11.72
      • 11.73
      • 11.74
      • 11.75
      • 11.76
      • 11.77
      • 11.78
      • 11.79
      • 11.8
      • 11.81
      • 11.82
      • 11.83
      • 11.84
      • 11.85
      • 11.86
      • 11.87
      • 11.88
      • 11.89
      • 11.9
      • 11.91
      • 11.92
      • 11.93
      • 11.94
      • 11.95
      • 11.96
      • 11.97
      • 11.98
      • 11.99
    • 12~12.9
      • 12
      • 12H
      • 12.1
      • 12.2
      • 12.3
      • 12.4
      • 12.5
      • 12.6
      • 12.7
      • 12.8
      • 12.9
    • 13~13.9
      • 13
      • 13.1
      • 13.2
      • 13.3
      • 13.4
      • 13.5
      • 13.6
      • 13.7
      • 13.8
      • 13.9
    • 14~14.9
      • 14
      • 14.1
      • 14.2
      • 14.3
      • 14.4
      • 14.5
      • 14.6
      • 14.7
      • 14.8
      • 14.9
    • 15~15.99
      • 15
      • 15.1
      • 15.2
      • 15.3
      • 15.4
      • 15.5
      • 15.51
      • 15.52
      • 15.53
      • 15.54
      • 15.55
      • 15.56
      • 15.57
      • 15.58
      • 15.59
      • 15.6
      • 15.61
      • 15.62
      • 15.63
      • 15.64
      • 15.65
      • 15.66
      • 15.67
      • 15.68
      • 15.69
      • 15.7
      • 15.71
      • 15.72
      • 15.73
      • 15.74
      • 15.75
      • 15.76
      • 15.77
      • 15.78
      • 15.79
      • 15.8
      • 15.81
      • 15.82
      • 15.83
      • 15.84
      • 15.85
      • 15.86
      • 15.87
      • 15.88
      • 15.89
      • 15.9
      • 15.91
      • 15.92
      • 15.93
      • 15.94
      • 15.95
      • 15.96
      • 15.97
      • 15.98
      • 15.99
    • 16~16.9
      • 16
      • 16.1
      • 16.2
      • 16.3
      • 16.4
      • 16.5
      • 16.6
      • 16.7
      • 16.8
      • 16.9
    • 17~17.9
      • 17
      • 17.1
      • 17.2
      • 17.3
      • 17.4
      • 17.5
      • 17.6
      • 17.7
      • 17.8
      • 17.9
    • 18~18.9
      • 18
      • 18.1
      • 18.2
      • 18.3
      • 18.4
      • 18.5
      • 18.6
      • 18.7
      • 18.8
      • 18.9
    • 19~19.99
      • 19
      • 19..5
      • 19.1
      • 19.2
      • 19.3
      • 19.4
      • 19.5
      • 19.51
      • 19.52
      • 19.53
      • 19.54
      • 19.55
      • 19.56
      • 19.57
      • 19.58
      • 19.59
      • 19.6
      • 19.61
      • 19.62
      • 19.63
      • 19.64
      • 19.65
      • 19.66
      • 19.67
      • 19.68
      • 19.69
      • 19.7
      • 19.71
      • 19.72
      • 19.73
      • 19.74
      • 19.75
      • 19.76
      • 19.77
      • 19.78
      • 19.79
      • 19.8
      • 19.81
      • 19.82
      • 19.83
      • 19.84
      • 19.85
      • 19.86
      • 19.87
      • 19.88
      • 19.89
      • 19.9
      • 19.91
      • 19.92
      • 19.93
      • 19.94
      • 19.95
      • 19.96
      • 19.97
      • 19.98
      • 19.99
    • 20~20.5
      • 20
      • 20.5
    • 21~21.5
      • 21
      • 21.5
    • 22~22.5
      • 22
      • 22.5
    • 23~23.5
      • 23
      • 23.5
    • 24~24.5
      • 24
      • 24.5
    • 25~25.5
      • 25
      • 25.5
    • 26~26.5
      • 26
      • 26.5
    • 27~27.5
      • 27
      • 27.5
    • 28~28.5
      • 28
      • 28.5
    • 29~29.5
      • 29
      • 29.5
    • 30
    • 31
    • 32
    • 33
    • 34
    • 35
    • 36
    • 37
    • 38
    • 39
    • 40
    • 41
    • 42
    • 43
    • 44
    • 45
    • 46
    • 47
    • 48
    • 49
    • 50
    • 51
    • 52
    • 53
    • 54
    • 55
    • 56
    • 57
    • 58
    • 59
    • 60
  • work material

  • Blade length (ℓ)(mm)

    • 0.01~0.9
      • 0.01
      • 0.02
      • 0.03
      • 0.04
      • 0.045
      • 0.05
      • 0.06
      • 0.07
      • 0.075
      • 0.08
      • 0.09
      • 0.1
      • 0.105
      • 0.12
      • 0.135
      • 0.15
      • 0.16
      • 0.2
      • 0.23
      • 0.24
      • 0.25
      • 0.3
      • 0.32
      • 0.4
      • 0.45
      • 0.5
      • 0.55
      • 0.6
      • 0.65
      • 0.7
      • 0.75
      • 0.8
      • 0.9
    • 1~1.9
      • 1
      • 1.05
      • 1.1
      • 1.2
      • 1.25
      • 1.3
      • 1.35
      • 1.4
      • 1.5
      • 1.6
      • 1.7
      • 1.75
      • 1.8
      • 1.9
    • 2~2.9
      • 2
      • 2.1
      • 2.2
      • 2.25
      • 2.3
      • 2.4
      • 2.5
      • 2.6
      • 2.7
      • 2.8
      • 2.9
    • 3~3.9
      • 3
      • 3.1
      • 3.2
      • 3.3
      • 3.4
      • 3.5
      • 3.6
      • 3.7
      • 3.75
      • 3.8
      • 3.9
    • 4~4.9
      • 4
      • 4.1
      • 4.2
      • 4.3
      • 4.4
      • 4.5
      • 4.6
      • 4.7
      • 4.8
      • 4.9
    • 5~5.9
      • 5
      • 5.1
      • 5.2
      • 5.25
      • 5.3
      • 5.4
      • 5.5
      • 5.6
      • 5.7
      • 5.8
      • 5.9
    • 6~6.9
      • 6
      • 6.1
      • 6.2
      • 6.25
      • 6.3
      • 6.4
      • 6.5
      • 6.6
      • 6.7
      • 6.75
      • 6.8
      • 6.9
    • 7~7.9
      • 7
      • 7.1
      • 7.2
      • 7.3
      • 7.4
      • 7.5
      • 7.6
      • 7.7
      • 7.8
      • 7.9
    • 8~8.9
      • 8
      • 8.1
      • 8.2
      • 8.25
      • 8.3
      • 8.4
      • 8.5
      • 8.6
      • 8.7
      • 8.8
      • 8.9
    • 9~9.9
      • 9
      • 9.1
      • 9.2
      • 9.3
      • 9.4
      • 9.5
      • 9.6
      • 9.7
      • 9.8
      • 9.9
    • 10~10.9
      • 10
      • 10.1
      • 10.2
      • 10.3
      • 10.4
      • 10.5
      • 10.6
      • 10.7
      • 10.8
      • 10.9
    • 11~11.9
      • 11
      • 11.1
      • 11.2
      • 11.3
      • 11.4
      • 11.5
      • 11.6
      • 11.7
      • 11.8
      • 11.9
    • 12~12.9
      • 12
      • 12.2
      • 12.3
      • 12.4
      • 12.5
      • 12.6
      • 12.8
      • 12.9
    • 13~13.8
      • 13
      • 13.1
      • 13.2
      • 13.3
      • 13.4
      • 13.5
      • 13.6
      • 13.7
      • 13.8
    • 14~14.9
      • 14
      • 14.1
      • 14.2
      • 14.3
      • 14.4
      • 14.5
      • 14.6
      • 14.7
      • 14.8
      • 14.9
    • 15~15.9
      • 15
      • 15.2
      • 15.3
      • 15.4
      • 15.5
      • 15.6
      • 15.8
      • 15.9
    • 16~16.8
      • 16
      • 16.2
      • 16.4
      • 16.5
      • 16.6
      • 16.8
    • 17~17.8
      • 17
      • 17.1
      • 17.2
      • 17.3
      • 17.4
      • 17.5
      • 17.6
      • 17.7
      • 17.8
    • 18~18.9
      • 18
      • 18.2
      • 18.3
      • 18.4
      • 18.5
      • 18.6
      • 18.8
      • 18.9
    • 19~19.8
      • 19
      • 19.2
      • 19.4
      • 19.5
      • 19.6
      • 19.8
    • 20~20.8
      • 20
      • 20.1
      • 20.2
      • 20.3
      • 20.4
      • 20.5
      • 20.6
      • 20.7
      • 20.8
    • 21~21.9
      • 21
      • 21.2
      • 21.3
      • 21.4
      • 21.5
      • 21.6
      • 21.8
      • 21.9
    • 22~22.8
      • 22
      • 22.2
      • 22.4
      • 22.5
      • 22.6
      • 22.8
    • 23~23.8
      • 23
      • 23.1
      • 23.2
      • 23.3
      • 23.4
      • 23.5
      • 23.6
      • 23.7
      • 23.8
    • 24~24.9
      • 24
      • 24.3
      • 24.4
      • 24.5
      • 24.6
      • 24.8
      • 24.9
    • 25~25.8
      • 25
      • 25.2
      • 25.5
      • 25.6
      • 25.8
    • 26~26.8
      • 26
      • 26.1
      • 26.4
      • 26.5
      • 26.7
      • 26.8
    • 27~27.9
      • 27
      • 27.2
      • 27.3
      • 27.5
      • 27.6
      • 27.9
    • 28~28.8
      • 28
      • 28.2
      • 28.4
      • 28.5
      • 28.8
    • 29~29.7
      • 29
      • 29.1
      • 29.2
      • 29.4
      • 29.5
      • 29.6
      • 29.7
    • 30~30.9
      • 30
      • 30.3
      • 30.4
      • 30.5
      • 30.6
      • 30.8
      • 30.9
    • 31~31.8
      • 31
      • 31.2
      • 31.5
      • 31.6
      • 31.8
    • 32~32.8
      • 32
      • 32.1
      • 32.4
      • 32.5
      • 32.7
      • 32.8
    • 33~33.9
      • 33
      • 33.2
      • 33.3
      • 33.5
      • 33.6
      • 33.9
    • 34~34.8
      • 34
      • 34.2
      • 34.4
      • 34.5
      • 34.8
    • 35~35.7
      • 35
      • 35.1
      • 35.2
      • 35.4
      • 35.5
      • 35.6
      • 35.7
    • 36~36.8
      • 36
      • 36.4
      • 36.5
      • 36.8
    • 37~37.6
      • 37
      • 37.2
      • 37.5
      • 37.6
    • 38~38.8
      • 38
      • 38.4
      • 38.5
      • 38.8
    • 39~39.6
      • 39
      • 39.2
      • 39.5
      • 39.6
    • 40~40.8
      • 40
      • 40.4
      • 40.5
      • 40.8
    • 41~41.6
      • 41
      • 41.2
      • 41.5
      • 41.6
    • 42~42.8
      • 42
      • 42.4
      • 42.5
      • 42.8
    • 43~43.6
      • 43
      • 43.2
      • 43.5
      • 43.6
    • 44~44.8
      • 44
      • 44.4
      • 44.5
      • 44.8
    • 45~45.6
      • 45
      • 45.2
      • 45.5
      • 45.6
    • 46~46.8
      • 46
      • 46.4
      • 46.5
      • 46.8
    • 47~47.6
      • 47
      • 47.2
      • 47.5
      • 47.6
    • 48~48.5
      • 48
      • 48.5
    • 49~49.5
      • 49
      • 49.5
    • 50~50.5
      • 50
      • 50.5
    • 51~51.5
      • 51
      • 51.5
    • 52~52.5
      • 52
      • 52.5
    • 53~53.5
      • 53
      • 53.5
    • 54~54.5
      • 54
      • 54.5
    • 55~55.5
      • 55
      • 55.5
    • 56~56.5
      • 56
      • 56.5
    • 57~57.5
      • 57
      • 57.5
    • 58~58.5
      • 58
      • 58.5
    • 59~59.5
      • 59
      • 59.5
    • 60
    • 62
    • 63
    • 64
    • 65
    • 66
    • 67
    • 70
    • 72
    • 75
    • 76
    • 78
    • 80
    • 82
    • 83
    • 85
    • 88
    • 90
    • 95
    • 100
    • 103
    • 106
    • 110
    • 112
    • 115
    • 120
    • 125
    • 130
    • 150
    • 200
    [4-90/1mm-Schritte]
  • Number of flutes(sheet)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 10
    • 12
    • 14
  • Type

  • Coating

  • Shank diameter (d)(mm)

    • 1
    • 1.5
    • 2
    • 3
    • 3.175
    • 4
    • 5
    • 5.8
    • 6
    • 6.35
    • 6.8
    • 7
    • 7.8
    • 8
    • 8.8
    • 9
    • 9.8
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
    • 17
    • 18
    • 20
    • 22
    • 24
    • 25
    • 30
    • 32
    • 42
  • Overall Length (L)(mm)

    • 35
    • 38
    • 38.1
    • 40
    • 45
    • 48
    • 49
    • 50
    • 52
    • 53
    • 54
    • 55
    • 57
    • 58
    • 60
    • 62
    • 63
    • 63.5
    • 64
    • 65
    • 66
    • 68
    • 69
    • 70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 80
    • 82
    • 83
    • 84
    • 85
    • 86
    • 87
    • 88
    • 89
    • 90
    • 92
    • 94
    • 95
    • 96
    • 97
    • 100
    • 104
    • 105
    • 106
    • 107
    • 109
    • 110
    • 111
    • 113
    • 115
    • 116
    • 118
    • 120
    • 121
    • 123
    • 125
    • 128
    • 130
    • 132
    • 135
    • 136
    • 140
    • 145
    • 150
    • 155
    • 160
    • 165
    • 166
    • 170
    • 175
    • 180
    • 185
    • 190
    • 200
    • 205
    • 210
    • 215
    • 220
    • 225
    • 230
    • 240
    • 250
    • 260
    • 265
    • 270
    • 280
    • 300
    • 310
    • 320
    • 350
    • 800
  • Underneck length (ℓ1)(mm)

    • 0.1~0.8
      • 0.1
      • 0.2
      • 0.3
      • 0.4
      • 0.5
      • 0.6
      • 0.75
      • 0.8
    • 1~1.9
      • 1
      • 1.2
      • 1.25
      • 1.4
      • 1.5
      • 1.6
      • 1.7
      • 1.8
      • 1.9
    • 2~2.8
      • 2
      • 2.4
      • 2.5
      • 2.8
    • 3~3.8
      • 3
      • 3.2
      • 3.3
      • 3.5
      • 3.8
    • 4~4.8
      • 4
      • 4.5
      • 4.7
      • 4.8
    • 5~5.5
      • 5
      • 5.5
    • 6~6.8
      • 6
      • 6.5
      • 6.8
    • 7~7.5
      • 7
      • 7.2
      • 7.3
      • 7.5
    • 8~8.5
      • 8
      • 8.3
      • 8.5
    • 9~9.5
      • 9
      • 9.5
    • 10~10.5
      • 10
      • 10.3
      • 10.5
    • 11~11.5
      • 11
      • 11.5
    • 12~12.8
      • 12
      • 12.5
      • 12.8
    • 13~13.5
      • 13
      • 13.5
    • 14~14.5
      • 14
      • 14.5
    • 15
    • 16~16.5
      • 16
      • 16.5
    • 17~17.5
      • 17
      • 17.5
    • 18
    • 19.6
    • 20
    • 21~21.5
      • 21
      • 21.1
      • 21.5
    • 22
    • 23
    • 24~24.1
      • 24
      • 24.1
    • 25
    • 26
    • 27
    • 28
    • 29
    • 30~30.5
      • 30
      • 30.5
    • 31.5
    • 32
    • 33~33.5
      • 33
      • 33.5
    • 34
    • 35
    • 36
    • 37~37.5
      • 37
      • 37.5
    • 38
    • 39
    • 40
    • 41
    • 42
    • 45
    • 47
    • 48
    • 50
    • 52
    • 53
    • 55
    • 57
    • 60
    • 63
    • 64
    • 65
    • 66
    • 70
    • 75
    • 80
    • 82
    • 85
    • 90
    • 100
    • 108
    • 110
    • 120
    • 125
    • 130
    • 140
    • 150
    • 200
    [8-140/1mm-Schritte]
  • Machining Application

  • Blade tip shape

  • Torsion Angle (θ)

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen