• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Schrupp-Schaftfräser (Hartmetall)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • XAC series carbide roughing end mill, fine pitch / regular model

    XAC series carbide roughing end mill, fine pitch / regular model

    MISUMI

    Strongly supports the cost reduction of roughing with the limited special price for standard sizes

    • Mengenrabatt
    • TiAlN
    • General Steel
    • R (Regular)
    ab
    38.31€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TSC series carbide roughing end mill, fine pitch / regular model

    TSC series carbide roughing end mill, fine pitch / regular model

    MISUMI

    The fine pitch achieves excellent surface roughness after machining

    • Mengenrabatt
    • TS
    • General Steel
    • R (Regular)
    ab
    32.40€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TSC series carbide roughing end mill, fine pitch / short model

    TSC series carbide roughing end mill, fine pitch / short model

    MISUMI

    Achieves long life and high-speed machining at the same time

    • Mengenrabatt
    • TS
    • General Steel
    • 4 Flutes
    • S (Short)
    ab
    28.13€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • VAC Series Carbide Roughing End Mill
    ab
    25.99€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model

    TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model

    MISUMI

    45° helix roughing that's capable of high-efficiency machining by high-speed rotation

    • Mengenrabatt
    • TS
    • General Steel
    • R (Regular)
    ab
    39.74€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model

    DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model

    MISUMI

    Popular DLC coated type of aluminum roughing

    • Mengenrabatt
    • DLC
    • Aluminum
    • 3 Flutes
    • R (Regular)
    ab
    35.34€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model

    Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model

    MISUMI

    Significantly reduces the roughing time of aluminum

    • Mengenrabatt
    • Non-Coated
    • Aluminum
    • 3 Flutes
    • R (Regular)
    ab
    26.29€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TSC series carbide roughing end mill, fine pitch / long model

    TSC series carbide roughing end mill, fine pitch / long model

    MISUMI

    A single unit supports both the roughing and medium roughing

    • Mengenrabatt
    • TS
    • General Steel
    • 4 Flutes
    • L (Long)
    ab
    53.24€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide End Mill CFRP Router Series With Fine Pitch Nick

    Carbide End Mill CFRP Router Series With Fine Pitch Nick

    OSG

    Diamond-coated router with an superior abrasion resistance.

    ab
    122.83€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Silent Roughing End Mill SI-WC-RESF
    ab
    90.48€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TSC series carbide roughing end mill, fine pitch / long regular model

    TSC series carbide roughing end mill, fine pitch / long regular model

    MISUMI

    A long shank type that's ideal for deep engraving

    • Mengenrabatt
    • TS
    • General Steel
    • R (Regular)
    ab
    38.72€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TSC series carbide roughing end mill, 45° spiral / fine pitch / short model

    TSC series carbide roughing end mill, 45° spiral / fine pitch / short model

    MISUMI

    45° helix roughing that's capable of high-efficiency machining by high-speed rotation

    • Mengenrabatt
    • TS
    • General Steel
    • S (Short)
    ab
    30.08€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TSC series carbide roughing end mill, 45° spiral / fine pitch / long model

    TSC series carbide roughing end mill, 45° spiral / fine pitch / long model

    MISUMI

    45° helix roughing that's capable of high-efficiency machining by high-speed rotation

    • Mengenrabatt
    • TS
    • General Steel
    • L (Long)
    ab
    63.02€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Roughing End Mill for Processing Aluminum, Model AL-OCRS-XLS

    Roughing End Mill for Processing Aluminum, Model AL-OCRS-XLS

    DIJET

    Diamond-coated router with an superior abrasion resistance.

    ab
    93.39€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GS MILL Heavy GSHV

    GS MILL Heavy GSHV

    NACHI(FUJIKOSHI)

    Suitable for roughing and medium finishing of workpiece materials such as steel and stainless steel. Performs high-efficiency machining even in BT30 machine with low cutting resistance

    ab
    77.80€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model

    TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model

    MISUMI

    45° helix roughing that's capable of high-efficiency machining by high-speed rotation

    • Mengenrabatt
    • TS
    • General Steel
    • R (Regular)
    ab
    62.25€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GS Mill Roughing End Mill GSRE4000SF Type

    GS Mill Roughing End Mill GSRE4000SF Type

    SUMITOMO ELECTRIC HARDMETAL

    By adoption of low-CO carbide base material, improves the rigidity and abrasion resistance simultaneously. By adopting ultra-smooth TIALN diameter coat, the cutting resistance is reduced along with the improvement of abrasion resistance, and high-efficiency roughing can be performed.

    ab
    82.95€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Roughing End Mill for Processing Aluminum, Model AL-OCRS-LS

    Roughing End Mill for Processing Aluminum, Model AL-OCRS-LS

    DIJET

    Diamond-coated router with an superior abrasion resistance.

    ab
    84.97€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GS MILL Roughing GSRE

    GS MILL Roughing GSRE

    NACHI(FUJIKOSHI)

    Performs high-speed, high-efficiency machining of workpiece materials such as carbon steel and stainless steel.

    ab
    77.85€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GSX MILL Roughing 2.5D GSXRE-2.5D

    GSX MILL Roughing 2.5D GSXRE-2.5D

    NACHI(FUJIKOSHI)

    Fracture resistance during high-speed, high efficiency machining has been increased. Heat resistance and wear resistance has further improved due to GSX coating.

    ab
    69.06€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SP Series Roughing End Mill 4-Flute Coating OK

    SP Series Roughing End Mill 4-Flute Coating OK

    OKAZAKI SEIKO

    Heavy-duty cutting and high-speed processing is possible by the effect of its own luffing shape and OK coating.

    ab
    45.32€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • STN Tornado End Mill MA

    STN Tornado End Mill MA

    ASAHI TOOLS

    Ideal for the side milling / grooving of difficult-to-cut materials (-HRC65), castings and carbon steel, stainless steel, etc. During middle / finishing cutting of high hardness steel, cut depth of up to 1/8D is possible in the radial direction.

    ab
    58.13€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide End Mill CFRP Router Series Herringbone Type

    Carbide End Mill CFRP Router Series Herringbone Type

    OSG

    Diamond-coated router with an superior abrasion resistance.

    ab
    109.00€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Coromill Plura, Carbide Shoulder Grinding End Mill

    Coromill Plura, Carbide Shoulder Grinding End Mill

    SANDVIK

    It will deliver high performance by the unique shape

    ab
    84.88€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Roughing End Mill for Processing Aluminum, Model AL-OCRL

    Roughing End Mill for Processing Aluminum, Model AL-OCRL

    DIJET

    Demonstrates long tool lif, due to ultrafine cemented carbide with excellent wear resistance.

    ab
    106.92€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Roughing Spiral End Mills, RSM4000 Type

    Roughing Spiral End Mills, RSM4000 Type

    SUMITOMO ELECTRIC HARDMETAL

    Nicked cutting edge quickly lifts swarf out of the hole, ensuring efficient drilling. Also provides vibration control effect and reduces cutting resistance.

    ab
    62.26€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SCT Long S-Cut End Mill MX30

    SCT Long S-Cut End Mill MX30

    ASAHI TOOLS

    JIS use classification symbols. For rough machining that uses M30 equivalent tip materials. Increases rough machining efficiency for materials such as non-ferrous metals, cast iron and steel

    ab
    326.92€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Roughing End Mill for Aluminum, 3 Flutes, Pure DLC Coated

    Roughing End Mill for Aluminum, 3 Flutes, Pure DLC Coated

    OKAZAKI SEIKO

    Due to wear prevention effect on pure DLC coat, long life can be gained unexpectedly.

    ab
    126.35€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Powerful Roughing Mill 4 Flute OK Tough Coating

    Powerful Roughing Mill 4 Flute OK Tough Coating

    OKAZAKI SEIKO

    By the synergistic effect of its own damping structure and OK tough coat, reduces the cutting resistance, and increases the durability.

    ab
    70.73€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Roughing Series WX Coated Roughing

    Carbide Roughing Series WX Coated Roughing

    OSG

    Since the wavy blade shape reduces the cutting power, big cutting is possible. High efficiency of strong roughing can be done even in chatter vibration.

    ab
    84.77€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • FA Coated Carbide Nα Nick

    FA Coated Carbide Nα Nick

    SANKO MFG

    Can process materials ranging from green wood to hardened steel. Has good chipping resistance and debris removal properties. Blade length incorporates a new standard developed with ease of use in mind.

    ab
    73.90€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Roughing End Mill for Processing Aluminum, Model AL-OCRS

    Roughing End Mill for Processing Aluminum, Model AL-OCRS

    DIJET

    Demonstrates long tool lif, due to ultrafine cemented carbide with excellent wear resistance.

    ab
    71.15€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SCT S-Cut End Mill MX30

    SCT S-Cut End Mill MX30

    ASAHI TOOLS

    JIS use classification symbols. For rough machining (roughing) using M30 equivalent tip materials. Increases rough machining efficiency for materials such as non-ferrous metals, cast iron and steel

    ab
    270.33€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SPSRD3ZA <Vertical-Running, Strengthening Roughing> SP Series Roughing Mill 3-Flute, Coating OK

    SPSRD3ZA SP Series Roughing Mill 3-Flute, Coating OK

    OKAZAKI SEIKO

    Versatile roughing end mills with enhanced traversing feed strength added to ZAKKURI MILL.

    ab
    50.14€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SA Coated Carbide Alpha Nick

    SA Coated Carbide Alpha Nick

    SANKO MFG

    Capable of heavy machining / high speed machining.

    ab
    81.11€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Roughing Series FX Coated Roughing

    Carbide Roughing Series FX Coated Roughing

    OSG

    Unique wavy cutting edge and cutting edge processing, carbide roughing end mill that enables heavy cutting of steel by FX coating.

    ab
    83.58€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SA Coated Carbide VICTORY Alpha Nick

    SA Coated Carbide VICTORY Alpha Nick

    SANKO MFG

    Can process materials ranging from green wood to hardened steel. Has good chipping resistance and debris removal properties.

    ab
    67.29€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GS MILL Heavy End Mill GSHV4000SF Type

    GS MILL Heavy End Mill GSHV4000SF Type

    SUMITOMO ELECTRIC HARDMETAL

    By adoption of low-CO carbide base material, improves the rigidity and abrasion resistance simultaneously. By adopting ultra-smooth TIALN diameter coat, the cutting resistance is reduced along with the improvement of abrasion resistance, and high-efficiency roughing can be performed.

    ab
    82.95€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Roughing Soldering End Mills, RMES4000 Type

    Roughing Soldering End Mills, RMES4000 Type

    SUMITOMO ELECTRIC HARDMETAL

    Brazed 4 flute roughing end mill for hogging. With anti-vibration effect and cutting resistance reduction

    ab
    184.68€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Coromill Plura, Carbide Solid End Mill, Roughing

    Coromill Plura, Carbide Solid End Mill, Roughing

    SANDVIK

    It will deliver high performance by the unique shape

    ab
    87.83€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • High Efficiency Chip Extraction Quantity Emphasized Roughing / Nick Cutting Edge 4RFSM

    High Efficiency Chip Extraction Quantity Emphasized Roughing / Nick Cutting Edge 4RFSM

    KYOCERA

    By the synergistic effect of its own damping structure and OK tough coat, reduces the cutting resistance, and increases the durability.

    ab
    72.67€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • High Efficiency Chip Extraction Quantity Emphasized Roughing / Nick Cutting Edge / Radius 3RFRS (Radius)

    High Efficiency Chip Extraction Quantity Emphasized Roughing / Nick Cutting Edge / Radius 3RFRS (Radius)

    KYOCERA

    Achieves excellent chatter performance in its own unequal spacing / unequal lead.

    ab
    122.79€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • Roughing End Mills, 4-Flute, OK-Tough-Coated

    Roughing End Mills, 4-Flute, OK-Tough-Coated

    OKAZAKI SEIKO

    Due To The Usage of The OK Tough Coat, it is Effective Against Stainless Steel and Viscous, Difficult-to-Machine Materials

    ab
    81.72€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Zakkuri Roughing Mill, OK Tough Coated 3 Flutes

    Zakkuri Roughing Mill, OK Tough Coated 3 Flutes

    OKAZAKI SEIKO

    Roughing end mill that allows vertical feeding. OK Tough Coating Achieves Excellent Machining Performance with Hard to Machine Materials

    ab
    65.93€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Roughing End Mill for Aluminum, 3 Flutes, Non-Coated

    Roughing End Mill for Aluminum, 3 Flutes, Non-Coated

    OKAZAKI SEIKO

    High helix roughing end-mill demonstrating excellent power against rough processing of aluminum material.

    ab
    70.73€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

  • Flute Diameter (D)(φ)

    • 0.01~0.99
      • 0.01
      • 0.02
      • 0.03
      • 0.04
      • 0.05
      • 0.06
      • 0.07
      • 0.08
      • 0.09
      • 0.1
      • 0.11
      • 0.12
      • 0.13
      • 0.14
      • 0.15
      • 0.16
      • 0.17
      • 0.18
      • 0.19
      • 0.2
      • 0.21
      • 0.22
      • 0.23
      • 0.24
      • 0.25
      • 0.26
      • 0.27
      • 0.28
      • 0.29
      • 0.3
      • 0.31
      • 0.32
      • 0.33
      • 0.34
      • 0.35
      • 0.36
      • 0.37
      • 0.38
      • 0.39
      • 0.4
      • 0.41
      • 0.42
      • 0.43
      • 0.44
      • 0.45
      • 0.46
      • 0.47
      • 0.48
      • 0.49
      • 0.5
      • 0.51
      • 0.52
      • 0.53
      • 0.54
      • 0.55
      • 0.56
      • 0.57
      • 0.58
      • 0.59
      • 0.6
      • 0.61
      • 0.62
      • 0.63
      • 0.64
      • 0.65
      • 0.66
      • 0.67
      • 0.68
      • 0.69
      • 0.7
      • 0.71
      • 0.72
      • 0.73
      • 0.74
      • 0.75
      • 0.76
      • 0.77
      • 0.78
      • 0.79
      • 0.8
      • 0.81
      • 0.82
      • 0.83
      • 0.84
      • 0.85
      • 0.86
      • 0.87
      • 0.88
      • 0.89
      • 0.9
      • 0.91
      • 0.92
      • 0.93
      • 0.94
      • 0.95
      • 0.96
      • 0.97
      • 0.98
      • 0.99
    • 1~1.99
      • 1
      • 1.01
      • 1.02
      • 1.03
      • 1.04
      • 1.05
      • 1.06
      • 1.07
      • 1.08
      • 1.09
      • 1.1
      • 1.11
      • 1.12
      • 1.13
      • 1.14
      • 1.15
      • 1.16
      • 1.17
      • 1.18
      • 1.19
      • 1.2
      • 1.21
      • 1.22
      • 1.23
      • 1.24
      • 1.25
      • 1.26
      • 1.27
      • 1.28
      • 1.29
      • 1.3
      • 1.31
      • 1.32
      • 1.33
      • 1.34
      • 1.35
      • 1.36
      • 1.37
      • 1.38
      • 1.39
      • 1.4
      • 1.41
      • 1.42
      • 1.43
      • 1.44
      • 1.45
      • 1.46
      • 1.47
      • 1.48
      • 1.49
      • 1.5
      • 1.51
      • 1.52
      • 1.53
      • 1.54
      • 1.55
      • 1.56
      • 1.57
      • 1.58
      • 1.59
      • 1.6
      • 1.61
      • 1.62
      • 1.63
      • 1.64
      • 1.65
      • 1.66
      • 1.67
      • 1.68
      • 1.69
      • 1.7
      • 1.71
      • 1.72
      • 1.73
      • 1.74
      • 1.75
      • 1.76
      • 1.77
      • 1.78
      • 1.79
      • 1.8
      • 1.81
      • 1.82
      • 1.83
      • 1.84
      • 1.85
      • 1.86
      • 1.87
      • 1.88
      • 1.89
      • 1.9
      • 1.91
      • 1.92
      • 1.93
      • 1.94
      • 1.95
      • 1.96
      • 1.97
      • 1.98
      • 1.99
    • 2~2.99
      • 2
      • 2.01
      • 2.02
      • 2.03
      • 2.04
      • 2.05
      • 2.06
      • 2.07
      • 2.08
      • 2.09
      • 2.1
      • 2.11
      • 2.12
      • 2.13
      • 2.14
      • 2.15
      • 2.16
      • 2.17
      • 2.18
      • 2.19
      • 2.2
      • 2.21
      • 2.22
      • 2.23
      • 2.24
      • 2.25
      • 2.26
      • 2.27
      • 2.28
      • 2.29
      • 2.3
      • 2.31
      • 2.32
      • 2.33
      • 2.34
      • 2.35
      • 2.36
      • 2.37
      • 2.38
      • 2.39
      • 2.4
      • 2.41
      • 2.42
      • 2.43
      • 2.44
      • 2.45
      • 2.46
      • 2.47
      • 2.48
      • 2.49
      • 2.5
      • 2.51
      • 2.52
      • 2.53
      • 2.54
      • 2.55
      • 2.56
      • 2.57
      • 2.58
      • 2.59
      • 2.6
      • 2.61
      • 2.62
      • 2.63
      • 2.64
      • 2.65
      • 2.66
      • 2.67
      • 2.68
      • 2.69
      • 2.7
      • 2.71
      • 2.72
      • 2.73
      • 2.74
      • 2.75
      • 2.76
      • 2.77
      • 2.78
      • 2.79
      • 2.8
      • 2.81
      • 2.82
      • 2.83
      • 2.84
      • 2.85
      • 2.86
      • 2.87
      • 2.88
      • 2.89
      • 2.9
      • 2.91
      • 2.92
      • 2.93
      • 2.94
      • 2.95
      • 2.96
      • 2.97
      • 2.98
      • 2.99
    • 3~3.99
      • 3
      • 3.01
      • 3.02
      • 3.03
      • 3.04
      • 3.05
      • 3.06
      • 3.07
      • 3.08
      • 3.09
      • 3.1
      • 3.11
      • 3.12
      • 3.13
      • 3.14
      • 3.15
      • 3.16
      • 3.17
      • 3.175
      • 3.18
      • 3.19
      • 3.2
      • 3.21
      • 3.22
      • 3.23
      • 3.24
      • 3.25
      • 3.26
      • 3.27
      • 3.28
      • 3.29
      • 3.3
      • 3.31
      • 3.32
      • 3.33
      • 3.34
      • 3.35
      • 3.36
      • 3.37
      • 3.38
      • 3.39
      • 3.4
      • 3.41
      • 3.42
      • 3.43
      • 3.44
      • 3.45
      • 3.46
      • 3.47
      • 3.48
      • 3.49
      • 3.5
      • 3.51
      • 3.52
      • 3.53
      • 3.54
      • 3.55
      • 3.56
      • 3.57
      • 3.58
      • 3.59
      • 3.6
      • 3.61
      • 3.62
      • 3.63
      • 3.64
      • 3.65
      • 3.66
      • 3.67
      • 3.68
      • 3.69
      • 3.7
      • 3.71
      • 3.72
      • 3.73
      • 3.74
      • 3.75
      • 3.76
      • 3.77
      • 3.78
      • 3.79
      • 3.8
      • 3.81
      • 3.82
      • 3.83
      • 3.84
      • 3.85
      • 3.86
      • 3.87
      • 3.88
      • 3.89
      • 3.9
      • 3.91
      • 3.92
      • 3.93
      • 3.94
      • 3.95
      • 3.96
      • 3.97
      • 3.98
      • 3.99
    • 4~4.99
      • 4
      • 4.01
      • 4.02
      • 4.03
      • 4.04
      • 4.05
      • 4.06
      • 4.07
      • 4.08
      • 4.09
      • 4.1
      • 4.11
      • 4.12
      • 4.13
      • 4.14
      • 4.15
      • 4.16
      • 4.17
      • 4.18
      • 4.19
      • 4.2
      • 4.21
      • 4.22
      • 4.23
      • 4.24
      • 4.25
      • 4.26
      • 4.27
      • 4.28
      • 4.29
      • 4.3
      • 4.31
      • 4.32
      • 4.33
      • 4.34
      • 4.35
      • 4.36
      • 4.37
      • 4.38
      • 4.39
      • 4.4
      • 4.41
      • 4.42
      • 4.43
      • 4.44
      • 4.45
      • 4.46
      • 4.47
      • 4.48
      • 4.49
      • 4.5
      • 4.51
      • 4.52
      • 4.53
      • 4.54
      • 4.55
      • 4.56
      • 4.57
      • 4.58
      • 4.59
      • 4.6
      • 4.61
      • 4.62
      • 4.63
      • 4.64
      • 4.65
      • 4.66
      • 4.67
      • 4.68
      • 4.69
      • 4.7
      • 4.71
      • 4.72
      • 4.73
      • 4.74
      • 4.75
      • 4.76
      • 4.77
      • 4.78
      • 4.79
      • 4.8
      • 4.81
      • 4.82
      • 4.83
      • 4.84
      • 4.85
      • 4.86
      • 4.87
      • 4.88
      • 4.89
      • 4.9
      • 4.91
      • 4.92
      • 4.93
      • 4.94
      • 4.95
      • 4.96
      • 4.97
      • 4.98
      • 4.99
    • 5~5.99
      • 5
      • 5.01
      • 5.02
      • 5.03
      • 5.04
      • 5.05
      • 5.06
      • 5.07
      • 5.08
      • 5.09
      • 5.1
      • 5.11
      • 5.12
      • 5.13
      • 5.14
      • 5.15
      • 5.16
      • 5.17
      • 5.18
      • 5.19
      • 5.2
      • 5.21
      • 5.22
      • 5.23
      • 5.24
      • 5.25
      • 5.26
      • 5.27
      • 5.28
      • 5.29
      • 5.3
      • 5.31
      • 5.32
      • 5.33
      • 5.34
      • 5.35
      • 5.36
      • 5.37
      • 5.38
      • 5.39
      • 5.4
      • 5.41
      • 5.42
      • 5.43
      • 5.44
      • 5.45
      • 5.46
      • 5.47
      • 5.48
      • 5.49
      • 5.5
      • 5.51
      • 5.52
      • 5.53
      • 5.54
      • 5.55
      • 5.56
      • 5.57
      • 5.58
      • 5.59
      • 5.6
      • 5.61
      • 5.62
      • 5.63
      • 5.64
      • 5.65
      • 5.66
      • 5.67
      • 5.68
      • 5.69
      • 5.7
      • 5.71
      • 5.72
      • 5.73
      • 5.74
      • 5.75
      • 5.76
      • 5.77
      • 5.78
      • 5.79
      • 5.8
      • 5.81
      • 5.82
      • 5.83
      • 5.84
      • 5.85
      • 5.86
      • 5.87
      • 5.88
      • 5.89
      • 5.9
      • 5.91
      • 5.92
      • 5.93
      • 5.94
      • 5.95
      • 5.96
      • 5.97
      • 5.98
      • 5.99
    • 6~6.9
      • 6
      • 6 H
      • 6.1
      • 6.2
      • 6.3
      • 6.35
      • 6.4
      • 6.5
      • 6.6
      • 6.7
      • 6.8
      • 6.9
    • 7~7.99
      • 7
      • 7.01
      • 7.02
      • 7.03
      • 7.04
      • 7.05
      • 7.06
      • 7.07
      • 7.08
      • 7.09
      • 7.1
      • 7.11
      • 7.12
      • 7.13
      • 7.14
      • 7.15
      • 7.16
      • 7.17
      • 7.18
      • 7.19
      • 7.2
      • 7.21
      • 7.22
      • 7.23
      • 7.24
      • 7.25
      • 7.26
      • 7.27
      • 7.28
      • 7.29
      • 7.3
      • 7.31
      • 7.32
      • 7.33
      • 7.34
      • 7.35
      • 7.36
      • 7.37
      • 7.38
      • 7.39
      • 7.4
      • 7.41
      • 7.42
      • 7.43
      • 7.44
      • 7.45
      • 7.46
      • 7.47
      • 7.48
      • 7.49
      • 7.5
      • 7.51
      • 7.52
      • 7.53
      • 7.54
      • 7.55
      • 7.56
      • 7.57
      • 7.58
      • 7.59
      • 7.6
      • 7.61
      • 7.62
      • 7.63
      • 7.64
      • 7.65
      • 7.66
      • 7.67
      • 7.68
      • 7.69
      • 7.7
      • 7.71
      • 7.72
      • 7.73
      • 7.74
      • 7.75
      • 7.76
      • 7.77
      • 7.78
      • 7.79
      • 7.8
      • 7.81
      • 7.82
      • 7.83
      • 7.84
      • 7.85
      • 7.86
      • 7.87
      • 7.88
      • 7.89
      • 7.9
      • 7.91
      • 7.92
      • 7.93
      • 7.94
      • 7.95
      • 7.96
      • 7.97
      • 7.98
      • 7.99
    • 8~8.9
      • 8
      • 8 H
      • 8.1
      • 8.2
      • 8.3
      • 8.4
      • 8.5
      • 8.6
      • 8.7
      • 8.8
      • 8.9
    • 9~9.99
      • 9
      • 9.01
      • 9.02
      • 9.03
      • 9.04
      • 9.05
      • 9.06
      • 9.07
      • 9.08
      • 9.09
      • 9.1
      • 9.11
      • 9.12
      • 9.13
      • 9.14
      • 9.15
      • 9.16
      • 9.17
      • 9.18
      • 9.19
      • 9.2
      • 9.21
      • 9.22
      • 9.23
      • 9.24
      • 9.25
      • 9.26
      • 9.27
      • 9.28
      • 9.29
      • 9.3
      • 9.31
      • 9.32
      • 9.33
      • 9.34
      • 9.35
      • 9.36
      • 9.37
      • 9.38
      • 9.39
      • 9.4
      • 9.41
      • 9.42
      • 9.43
      • 9.44
      • 9.45
      • 9.46
      • 9.47
      • 9.48
      • 9.49
      • 9.5
      • 9.51
      • 9.52
      • 9.53
      • 9.54
      • 9.55
      • 9.56
      • 9.57
      • 9.58
      • 9.59
      • 9.6
      • 9.61
      • 9.62
      • 9.63
      • 9.64
      • 9.65
      • 9.66
      • 9.67
      • 9.68
      • 9.69
      • 9.7
      • 9.71
      • 9.72
      • 9.73
      • 9.74
      • 9.75
      • 9.76
      • 9.77
      • 9.78
      • 9.79
      • 9.8
      • 9.81
      • 9.82
      • 9.83
      • 9.84
      • 9.85
      • 9.86
      • 9.87
      • 9.88
      • 9.89
      • 9.9
      • 9.91
      • 9.92
      • 9.93
      • 9.94
      • 9.95
      • 9.96
      • 9.97
      • 9.98
      • 9.99
    • 10~10.9
      • 10
      • 10 H
      • 10.1
      • 10.2
      • 10.3
      • 10.4
      • 10.5
      • 10.6
      • 10.7
      • 10.8
      • 10.9
    • 11~11.99
      • 11
      • 11.01
      • 11.02
      • 11.03
      • 11.04
      • 11.05
      • 11.06
      • 11.07
      • 11.08
      • 11.09
      • 11.1
      • 11.11
      • 11.12
      • 11.13
      • 11.14
      • 11.15
      • 11.16
      • 11.17
      • 11.18
      • 11.19
      • 11.2
      • 11.21
      • 11.22
      • 11.23
      • 11.24
      • 11.25
      • 11.26
      • 11.27
      • 11.28
      • 11.29
      • 11.3
      • 11.31
      • 11.32
      • 11.33
      • 11.34
      • 11.35
      • 11.36
      • 11.37
      • 11.38
      • 11.39
      • 11.4
      • 11.41
      • 11.42
      • 11.43
      • 11.44
      • 11.45
      • 11.46
      • 11.47
      • 11.48
      • 11.49
      • 11.5
      • 11.51
      • 11.52
      • 11.53
      • 11.54
      • 11.55
      • 11.56
      • 11.57
      • 11.58
      • 11.59
      • 11.6
      • 11.61
      • 11.62
      • 11.63
      • 11.64
      • 11.65
      • 11.66
      • 11.67
      • 11.68
      • 11.69
      • 11.7
      • 11.71
      • 11.72
      • 11.73
      • 11.74
      • 11.75
      • 11.76
      • 11.77
      • 11.78
      • 11.79
      • 11.8
      • 11.81
      • 11.82
      • 11.83
      • 11.84
      • 11.85
      • 11.86
      • 11.87
      • 11.88
      • 11.89
      • 11.9
      • 11.91
      • 11.92
      • 11.93
      • 11.94
      • 11.95
      • 11.96
      • 11.97
      • 11.98
      • 11.99
    • 12~12.9
      • 12
      • 12 H
      • 12.1
      • 12.2
      • 12.3
      • 12.4
      • 12.5
      • 12.6
      • 12.7
      • 12.8
      • 12.9
    • 13~13.9
      • 13
      • 13.1
      • 13.2
      • 13.3
      • 13.4
      • 13.5
      • 13.6
      • 13.7
      • 13.8
      • 13.9
    • 14~14.9
      • 14
      • 14.1
      • 14.2
      • 14.3
      • 14.4
      • 14.5
      • 14.6
      • 14.7
      • 14.8
      • 14.9
    • 15~15.99
      • 15
      • 15.1
      • 15.2
      • 15.3
      • 15.4
      • 15.5
      • 15.51
      • 15.52
      • 15.53
      • 15.54
      • 15.55
      • 15.56
      • 15.57
      • 15.58
      • 15.59
      • 15.6
      • 15.61
      • 15.62
      • 15.63
      • 15.64
      • 15.65
      • 15.66
      • 15.67
      • 15.68
      • 15.69
      • 15.7
      • 15.71
      • 15.72
      • 15.73
      • 15.74
      • 15.75
      • 15.76
      • 15.77
      • 15.78
      • 15.79
      • 15.8
      • 15.81
      • 15.82
      • 15.83
      • 15.84
      • 15.85
      • 15.86
      • 15.87
      • 15.88
      • 15.89
      • 15.9
      • 15.91
      • 15.92
      • 15.93
      • 15.94
      • 15.95
      • 15.96
      • 15.97
      • 15.98
      • 15.99
    • 16~16.9
      • 16
      • 16.1
      • 16.2
      • 16.3
      • 16.4
      • 16.5
      • 16.6
      • 16.7
      • 16.8
      • 16.9
    • 17~17.9
      • 17
      • 17.1
      • 17.2
      • 17.3
      • 17.4
      • 17.5
      • 17.6
      • 17.7
      • 17.8
      • 17.9
    • 18~18.9
      • 18
      • 18.1
      • 18.2
      • 18.3
      • 18.4
      • 18.5
      • 18.6
      • 18.7
      • 18.8
      • 18.9
    • 19~19.99
      • 19
      • 19..5
      • 19.1
      • 19.2
      • 19.3
      • 19.4
      • 19.5
      • 19.51
      • 19.52
      • 19.53
      • 19.54
      • 19.55
      • 19.56
      • 19.57
      • 19.58
      • 19.59
      • 19.6
      • 19.61
      • 19.62
      • 19.63
      • 19.64
      • 19.65
      • 19.66
      • 19.67
      • 19.68
      • 19.69
      • 19.7
      • 19.71
      • 19.72
      • 19.73
      • 19.74
      • 19.75
      • 19.76
      • 19.77
      • 19.78
      • 19.79
      • 19.8
      • 19.81
      • 19.82
      • 19.83
      • 19.84
      • 19.85
      • 19.86
      • 19.87
      • 19.88
      • 19.89
      • 19.9
      • 19.91
      • 19.92
      • 19.93
      • 19.94
      • 19.95
      • 19.96
      • 19.97
      • 19.98
      • 19.99
    • 20~20.5
      • 20
      • 20.5
    • 21~21.5
      • 21
      • 21.5
    • 22~22.5
      • 22
      • 22.5
    • 23~23.5
      • 23
      • 23.5
    • 24~24.5
      • 24
      • 24.5
    • 25~25.5
      • 25
      • 25.5
    • 26~26.5
      • 26
      • 26.5
    • 27~27.5
      • 27
      • 27.5
    • 28~28.5
      • 28
      • 28.5
    • 29~29.5
      • 29
      • 29.5
    • 30
    • 31
    • 32
    • 33
    • 34
    • 35
    • 36
    • 37
    • 38
    • 39
    • 40
    • 41
    • 42
    • 43
    • 44
    • 45
    • 46
    • 47
    • 48
    • 49
    • 50
    • 51
    • 52
    • 53
    • 54
    • 55
    • 56
    • 57
    • 58
    • 59
    • 60
  • Work Material

  • Flute Length (ℓ)(mm)

    • 0.01~0.9
      • 0.01
      • 0.02
      • 0.03
      • 0.04
      • 0.045
      • 0.05
      • 0.06
      • 0.07
      • 0.075
      • 0.08
      • 0.09
      • 0.1
      • 0.105
      • 0.12
      • 0.135
      • 0.15
      • 0.16
      • 0.2
      • 0.23
      • 0.24
      • 0.25
      • 0.3
      • 0.32
      • 0.4
      • 0.45
      • 0.5
      • 0.55
      • 0.6
      • 0.65
      • 0.7
      • 0.75
      • 0.8
      • 0.9
    • 1~1.9
      • 1
      • 1.05
      • 1.1
      • 1.2
      • 1.25
      • 1.3
      • 1.35
      • 1.4
      • 1.5
      • 1.6
      • 1.7
      • 1.75
      • 1.8
      • 1.9
    • 2~2.9
      • 2
      • 2.1
      • 2.2
      • 2.25
      • 2.3
      • 2.4
      • 2.5
      • 2.6
      • 2.7
      • 2.8
      • 2.9
    • 3~3.9
      • 3
      • 3.1
      • 3.2
      • 3.3
      • 3.4
      • 3.5
      • 3.6
      • 3.7
      • 3.75
      • 3.8
      • 3.9
    • 4~4.9
      • 4
      • 4.1
      • 4.2
      • 4.3
      • 4.4
      • 4.5
      • 4.6
      • 4.7
      • 4.8
      • 4.9
    • 5~5.9
      • 5
      • 5.1
      • 5.2
      • 5.25
      • 5.3
      • 5.4
      • 5.5
      • 5.6
      • 5.7
      • 5.8
      • 5.9
    • 6~6.9
      • 6
      • 6.1
      • 6.2
      • 6.25
      • 6.3
      • 6.4
      • 6.5
      • 6.6
      • 6.7
      • 6.75
      • 6.8
      • 6.9
    • 7~7.9
      • 7
      • 7.1
      • 7.2
      • 7.3
      • 7.4
      • 7.5
      • 7.6
      • 7.7
      • 7.8
      • 7.9
    • 8~8.9
      • 8
      • 8.1
      • 8.2
      • 8.25
      • 8.3
      • 8.4
      • 8.5
      • 8.6
      • 8.7
      • 8.8
      • 8.9
    • 9~9.9
      • 9
      • 9.1
      • 9.2
      • 9.3
      • 9.4
      • 9.5
      • 9.6
      • 9.7
      • 9.8
      • 9.9
    • 10~10.9
      • 10
      • 10.1
      • 10.2
      • 10.3
      • 10.4
      • 10.5
      • 10.6
      • 10.7
      • 10.8
      • 10.9
    • 11~11.9
      • 11
      • 11.1
      • 11.2
      • 11.3
      • 11.4
      • 11.5
      • 11.6
      • 11.7
      • 11.8
      • 11.9
    • 12~12.9
      • 12
      • 12.2
      • 12.3
      • 12.4
      • 12.5
      • 12.6
      • 12.8
      • 12.9
    • 13~13.8
      • 13
      • 13.1
      • 13.2
      • 13.3
      • 13.4
      • 13.5
      • 13.6
      • 13.7
      • 13.8
    • 14~14.9
      • 14
      • 14.1
      • 14.2
      • 14.3
      • 14.4
      • 14.5
      • 14.6
      • 14.7
      • 14.8
      • 14.9
    • 15~15.9
      • 15
      • 15.2
      • 15.3
      • 15.4
      • 15.5
      • 15.6
      • 15.8
      • 15.9
    • 16~16.8
      • 16
      • 16.2
      • 16.4
      • 16.5
      • 16.6
      • 16.8
    • 17~17.8
      • 17
      • 17.1
      • 17.2
      • 17.3
      • 17.4
      • 17.5
      • 17.6
      • 17.7
      • 17.8
    • 18~18.9
      • 18
      • 18.2
      • 18.3
      • 18.4
      • 18.5
      • 18.6
      • 18.8
      • 18.9
    • 19~19.8
      • 19
      • 19.2
      • 19.4
      • 19.5
      • 19.6
      • 19.8
    • 20~20.8
      • 20
      • 20.1
      • 20.2
      • 20.3
      • 20.4
      • 20.5
      • 20.6
      • 20.7
      • 20.8
    • 21~21.9
      • 21
      • 21.2
      • 21.3
      • 21.4
      • 21.5
      • 21.6
      • 21.8
      • 21.9
    • 22~22.8
      • 22
      • 22.2
      • 22.4
      • 22.5
      • 22.6
      • 22.8
    • 23~23.8
      • 23
      • 23.1
      • 23.2
      • 23.3
      • 23.4
      • 23.5
      • 23.6
      • 23.7
      • 23.8
    • 24~24.9
      • 24
      • 24.3
      • 24.4
      • 24.5
      • 24.6
      • 24.8
      • 24.9
    • 25~25.8
      • 25
      • 25.2
      • 25.5
      • 25.6
      • 25.8
    • 26~26.8
      • 26
      • 26.1
      • 26.4
      • 26.5
      • 26.7
      • 26.8
    • 27~27.9
      • 27
      • 27.2
      • 27.3
      • 27.5
      • 27.6
      • 27.9
    • 28~28.8
      • 28
      • 28.2
      • 28.4
      • 28.5
      • 28.8
    • 29~29.7
      • 29
      • 29.1
      • 29.2
      • 29.4
      • 29.5
      • 29.6
      • 29.7
    • 30~30.9
      • 30
      • 30.3
      • 30.4
      • 30.5
      • 30.6
      • 30.8
      • 30.9
    • 31~31.8
      • 31
      • 31.2
      • 31.5
      • 31.6
      • 31.8
    • 32~32.8
      • 32
      • 32.1
      • 32.4
      • 32.5
      • 32.7
      • 32.8
    • 33~33.9
      • 33
      • 33.2
      • 33.3
      • 33.5
      • 33.6
      • 33.9
    • 34~34.8
      • 34
      • 34.2
      • 34.4
      • 34.5
      • 34.8
    • 35~35.7
      • 35
      • 35.1
      • 35.2
      • 35.4
      • 35.5
      • 35.6
      • 35.7
    • 36~36.8
      • 36
      • 36.4
      • 36.5
      • 36.8
    • 37~37.6
      • 37
      • 37.2
      • 37.5
      • 37.6
    • 38~38.8
      • 38
      • 38.4
      • 38.5
      • 38.8
    • 39~39.6
      • 39
      • 39.2
      • 39.5
      • 39.6
    • 40~40.8
      • 40
      • 40.4
      • 40.5
      • 40.8
    • 41~41.6
      • 41
      • 41.2
      • 41.5
      • 41.6
    • 42~42.8
      • 42
      • 42.4
      • 42.5
      • 42.8
    • 43~43.6
      • 43
      • 43.2
      • 43.5
      • 43.6
    • 44~44.8
      • 44
      • 44.4
      • 44.5
      • 44.8
    • 45~45.6
      • 45
      • 45.2
      • 45.5
      • 45.6
    • 46~46.8
      • 46
      • 46.4
      • 46.5
      • 46.8
    • 47~47.6
      • 47
      • 47.2
      • 47.5
      • 47.6
    • 48~48.5
      • 48
      • 48.5
    • 49~49.5
      • 49
      • 49.5
    • 50~50.5
      • 50
      • 50.5
    • 51~51.5
      • 51
      • 51.5
    • 52~52.5
      • 52
      • 52.5
    • 53~53.5
      • 53
      • 53.5
    • 54~54.5
      • 54
      • 54.5
    • 55~55.5
      • 55
      • 55.5
    • 56~56.5
      • 56
      • 56.5
    • 57~57.5
      • 57
      • 57.5
    • 58~58.5
      • 58
      • 58.5
    • 59~59.5
      • 59
      • 59.5
    • 60
    • 62
    • 63
    • 64
    • 65
    • 66
    • 67
    • 70
    • 72
    • 75
    • 76
    • 78
    • 80
    • 82
    • 83
    • 85
    • 88
    • 90
    • 95
    • 100
    • 103
    • 106
    • 110
    • 112
    • 115
    • 120
    • 125
    • 130
    • 150
    • 200
    [4-90/1mm-Schritte]
  • Number of Flutes(Pieces)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 10
    • 12
    • 14
  • Model

  • Coating

  • Link Diameter (d)(mm)

    • 1
    • 1.5
    • 2
    • 3
    • 3.175
    • 4
    • 5
    • 5.8
    • 6
    • 6.35
    • 6.8
    • 7
    • 7.8
    • 8
    • 8.8
    • 9
    • 9.8
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
    • 17
    • 18
    • 20
    • 22
    • 24
    • 25
    • 30
    • 32
    • 42
  • Overall Length (L)(mm)

    • 35
    • 38
    • 38.1
    • 40
    • 45
    • 48
    • 49
    • 50
    • 52
    • 53
    • 54
    • 55
    • 57
    • 58
    • 60
    • 62
    • 63
    • 63.5
    • 64
    • 65
    • 66
    • 68
    • 69
    • 70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 80
    • 82
    • 83
    • 84
    • 85
    • 86
    • 87
    • 88
    • 89
    • 90
    • 92
    • 95
    • 96
    • 97
    • 100
    • 104
    • 105
    • 106
    • 107
    • 109
    • 110
    • 111
    • 113
    • 115
    • 116
    • 118
    • 120
    • 121
    • 123
    • 125
    • 128
    • 130
    • 132
    • 135
    • 136
    • 140
    • 145
    • 150
    • 155
    • 160
    • 165
    • 166
    • 170
    • 175
    • 180
    • 185
    • 190
    • 200
    • 205
    • 210
    • 215
    • 220
    • 225
    • 230
    • 240
    • 250
    • 260
    • 265
    • 270
    • 280
    • 300
    • 310
    • 320
    • 350
    • 800
  • Length Under Neck (ℓ1)(mm)

    • 0.1~0.8
      • 0.1
      • 0.2
      • 0.3
      • 0.4
      • 0.5
      • 0.6
      • 0.75
      • 0.8
    • 1~1.9
      • 1
      • 1.2
      • 1.25
      • 1.4
      • 1.5
      • 1.6
      • 1.7
      • 1.8
      • 1.9
    • 2~2.8
      • 2
      • 2.4
      • 2.5
      • 2.8
    • 3~3.8
      • 3
      • 3.2
      • 3.3
      • 3.5
      • 3.8
    • 4~4.8
      • 4
      • 4.5
      • 4.7
      • 4.8
    • 5~5.5
      • 5
      • 5.5
    • 6~6.8
      • 6
      • 6.5
      • 6.8
    • 7~7.5
      • 7
      • 7.2
      • 7.3
      • 7.5
    • 8~8.5
      • 8
      • 8.3
      • 8.5
    • 9~9.5
      • 9
      • 9.5
    • 10~10.5
      • 10
      • 10.3
      • 10.5
    • 11~11.5
      • 11
      • 11.5
    • 12~12.8
      • 12
      • 12.5
      • 12.8
    • 13~13.5
      • 13
      • 13.5
    • 14~14.5
      • 14
      • 14.5
    • 15
    • 16~16.5
      • 16
      • 16.5
    • 17~17.5
      • 17
      • 17.5
    • 18
    • 19.6
    • 20
    • 21~21.5
      • 21
      • 21.1
      • 21.5
    • 22
    • 23
    • 24~24.1
      • 24
      • 24.1
    • 25
    • 26
    • 27
    • 28
    • 29
    • 30~30.5
      • 30
      • 30.5
    • 31.5
    • 32
    • 33~33.5
      • 33
      • 33.5
    • 34
    • 35
    • 36
    • 37~37.5
      • 37
      • 37.5
    • 38
    • 39
    • 40
    • 41
    • 42
    • 45
    • 47
    • 48
    • 50
    • 52
    • 53
    • 55
    • 57
    • 60
    • 63
    • 64
    • 65
    • 66
    • 70
    • 75
    • 80
    • 82
    • 85
    • 90
    • 100
    • 108
    • 110
    • 120
    • 125
    • 130
    • 140
    • 150
    • 200
    [8-140/1mm-Schritte]
  • Processing Applications

  • Flute Shape

  • Torsion Angle (θ)

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen