• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Rechteckfräser (HSS)(Seite2)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • 12 Tage oder weniger
  • 33 Tage oder weniger
  • V Coated XPM End Mill (4-Flute Short Type), V-XPM-EMS

    V Coated XPM End Mill (4-Flute Short Type), V-XPM-EMS

    OSG

    V coating has been applied to high-speed steel powder XPM. Base Material Adopted Powdered High Speed Steel XPM 2-Flute Short Series

    • Mengenrabatt
    ab
    33.24€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • AS Coated High-Speed Steel Square End Mill, 4-Flute / Regular

    AS Coated High-Speed Steel Square End Mill, 4-Flute / Regular

    MISUMI

    The durability has been remarkably improved with the superior heat resistance and film hardness of the AS coating over conventional products

    • Mengenrabatt
    • AS
    • 4 Flutes
    • R (Regular)
    ab
    14.75€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

    Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

    MISUMI

    A lineup of powdered high speed steel non-coated type from short to long

    • Mengenrabatt
    • Non-Coated
    • 2 Flutes
    • R (Regular)
    ab
    12.76€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Multi-Flute Extra Long EXML

    Multi-Flute Extra Long EXML

    OSG

    30°- 45° helix angle, cobalt high-speed steel, extra long type end mill.

    • Mengenrabatt
    ab
    28.84€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular

    AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular

    MISUMI

    The strong helix of positive blade is ideal in the standing-wall finishing of raw materials

    • Mengenrabatt
    • AS
    • 4 Flutes
    • R (Regular)
    ab
    18.29€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Long Shank End Mills, 2-Flute

    Long Shank End Mills, 2-Flute

    FUKUDA

    Long Shank For Deep Engraving

    ab
    30.77€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • AS Coated High-Speed Steel Square End Mill, 2-Flute / Long

    AS Coated High-Speed Steel Square End Mill, 2-Flute / Long

    MISUMI

    AS coating that provides improved processing efficiency in high-speed steel end mill

    • Mengenrabatt
    • AS
    • 2 Flutes
    • L (Long)
    ab
    14.13€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • AS Coated High-Speed Steel Square End Mill, 4-Flute / Short

    AS Coated High-Speed Steel Square End Mill, 4-Flute / Short

    MISUMI

    The durability has been remarkably improved with the superior heat resistance and film hardness of the AS coating over conventional products

    • Mengenrabatt
    • AS
    • 4 Flutes
    • S (Short)
    ab
    13.58€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • High-Speed Steel Corner C End Mill, 2-Flute / Short Model

    High-Speed Steel Corner C End Mill, 2-Flute / Short Model

    MISUMI

    End mill series with the C surface that can be selected in 0.1 mm increments

    • Non-Coated
    • 2 Flutes
    • S (Short)
    Minimum Lieferzeit
    5 Arbeitstage
  • XPM End Mill, (2-Flute Short Type), XPM-EDS

    XPM End Mill, (2-Flute Short Type), XPM-EDS

    OSG

    Base Material Adopted Powdered High Speed Steel XPM 2-Flute Short Series

    • Mengenrabatt
    ab
    22.83€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • V Coated XPM End Mill (High-Helix Short Type), V-XPM-EHS

    V Coated XPM End Mill (High-Helix Short Type), V-XPM-EHS

    OSG

    Sharp high helix type. Widely used from heavy cutting to finish cutting.

    • Mengenrabatt
    ab
    34.74€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • End Mill (2-Flute Short Type for Aluminum), AL-EDS

    End Mill (2-Flute Short Type for Aluminum), AL-EDS

    OSG

    High speed square end-mill for aluminum.

    • Mengenrabatt
    ab
    16.82€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • P Coated 4-Flute Short Blade

    P Coated 4-Flute Short Blade

    SANKO MFG

    4-bladed end mill for finishing work. Has excellent surface smoothness and abrasion resistance.

    • Mengenrabatt
    ab
    21.13€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long

    AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long

    MISUMI

    High durability is achieved for a wide range of materials from raw materials to heat-treated steel

    • Mengenrabatt
    • AS
    • 4 Flutes
    • L (Long)
    ab
    19.98€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • HSP Long High Spiral End Mill, G2

    HSP Long High Spiral End Mill, G2

    ASAHI TOOLS

    Long blade specification. By adopting sinking center shape, re-polishing can be UP.

    • Mengenrabatt
    ab
    91.58€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • CPM End Mill (Medium for 2-Flute, Straight Blade Shape) CPM-STDN

    CPM End Mill (Medium for 2-Flute, Straight Blade Shape) CPM-STDN

    OSG

    It is molding straight blade end mill.

    • Mengenrabatt
    ab
    24.83€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • AS Coated High-Speed Steel Square End Mill, 2-Flute / Regular

    AS Coated High-Speed Steel Square End Mill, 2-Flute / Regular

    MISUMI

    AS coating that provides improved processing efficiency in high-speed steel end mill

    • Mengenrabatt
    • AS
    • 2 Flutes
    • R (Regular)
    ab
    13.13€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • BS Handle Long Spiral End Mill LSPE-BS (SKH51)
    ab
    68.28€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • V Coated XPM End Mill (2-Flute Medium Type), V-XPM-EDN

    V Coated XPM End Mill (2-Flute Medium Type), V-XPM-EDN

    OSG

    V coating has been applied to high-speed steel powder XPM. Base Material Adopted Powdered High Speed Steel XPM 2-Flute Short Series

    • Mengenrabatt
    ab
    30.34€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • End Mill (2 Flutes, for Stainless Steel), SUS-EDS

    End Mill (2 Flutes, for Stainless Steel), SUS-EDS

    OSG

    High-speed stainless square end mills for stainless steel.

    • Mengenrabatt
    ab
    18.42€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 4-Flute Regular Blade

    4-Flute Regular Blade

    SANKO MFG

    4-bladed end mill for finishing work. Plus outer diameter tolerance.

    • Mengenrabatt
    ab
    15.19€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • AG Mill 4-Flute 4AGE

    AG Mill 4-Flute 4AGE

    NACHI(FUJIKOSHI)

    Performs high-speed, high-efficiency machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for side surface processing.

    ab
    22.94€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long

    AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long

    MISUMI

    AS coating with the film hardness and heat resistance that withstand a various applications

    • Mengenrabatt
    • AS
    • 2 Flutes
    • L (Long)
    ab
    18.88€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Special Long Shank End Mill 2 Flute

    Special Long Shank End Mill 2 Flute

    FUKUDA

    The shank is particularly long for deep engraving use. Designed with a thin shank.

    ab
    34.95€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • G Long End Mill 4-Flute SL4GE

    G Long End Mill 4-Flute SL4GE

    NACHI(FUJIKOSHI)

    General-purpose coating end-mill. Suitable for wide side surfaces and side milling at depth.

    ab
    27.16€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • For 2-Flute Key Groove EX-TIN-EKD (OH1)

    For 2-Flute Key Groove EX-TIN-EKD (OH1)

    OSG

    Key Grooving (OH1)

    • Mengenrabatt
    ab
    21.13€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 2-Flute General Use, Medium

    2-Flute General Use, Medium

    OSG

    High speed steel square series.

    • Mengenrabatt
    ab
    16.12€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • End Mill (3-Flute General-Purpose Short Type), ETS

    End Mill (3-Flute General-Purpose Short Type), ETS

    OSG

    High speed steel square series.

    • Mengenrabatt
    ab
    18.62€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • End Mill (Multi-Flute Long-Shank Short Type), LS-EMS

    End Mill (Multi-Flute Long-Shank Short Type), LS-EMS

    OSG

    High speed steel square series.

    • Mengenrabatt
    ab
    30.84€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TIN Coated XPM End Mill (High Helix Short Type) TIN-XPM-EHS

    TIN Coated XPM End Mill (High Helix Short Type) TIN-XPM-EHS

    OSG

    TIN coating, helix angle 50°, short size end-mill.

    • Mengenrabatt
    ab
    39.05€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 4-Flute Short Blade

    4-Flute Short Blade

    SANKO MFG

    4-bladed end mill for finishing work.

    • Mengenrabatt
    ab
    15.19€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • AG Mill 4-Flute Long 4AGEL

    AG Mill 4-Flute Long 4AGEL

    NACHI(FUJIKOSHI)

    Suitable for wide side surfaces and side milling at depth.

    ab
    27.28€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • HSP Long High Spiral End Mill, MA

    HSP Long High Spiral End Mill, MA

    ASAHI TOOLS

    Long blade specification. By adopting sinking center shape, re-polishing can be UP.

    • Mengenrabatt
    ab
    92.12€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 4-Flute, Long, EX-TIN-EML

    4-Flute, Long, EX-TIN-EML

    OSG

    TIN coating, helix angle 30°, cobalt high speed steel square end-mill.

    • Mengenrabatt
    ab
    30.14€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • XPM End Mill (2-Flute Medium Type), XPM-EDN

    XPM End Mill (2-Flute Medium Type), XPM-EDN

    OSG

    Setting the short and long blade to middle length.

    • Mengenrabatt
    ab
    24.13€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TIN Coated End Mill (4-Flute Short Type) EX-TIN-EMS

    TIN Coated End Mill (4-Flute Short Type) EX-TIN-EMS

    OSG

    Adopted TIN coating of excellent abrasion resistance and anti-weldability

    • Mengenrabatt
    ab
    23.23€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • AG Mill 2-Flute 2AGE

    AG Mill 2-Flute 2AGE

    NACHI(FUJIKOSHI)

    Performs high-speed, high-efficiency machining of workpiece materials from carbon steel and stainless steel to aluminum.

    ab
    21.08€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SG-FAX End Mill Long 2-Flute SL2SGE

    SG-FAX End Mill Long 2-Flute SL2SGE

    NACHI(FUJIKOSHI)

    General-purpose coating end-mill. Suitable for deep grooving and grooving at depth.

    ab
    35.35€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • XPM End Mill (2-Flute Deep-Carving Medium Type), DE-XPM-EDN

    XPM End Mill (2-Flute Deep-Carving Medium Type), DE-XPM-EDN

    OSG

    Long shank form end mill with 2 blades for deep engraving. Set with a shank radius thinner than the blade bore.

    • Mengenrabatt
    ab
    31.88€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model

    Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model

    MISUMI

    Powdered high-speed steel and non-coated 4-flute series

    • Mengenrabatt
    • Non-Coated
    • 4 Flutes
    • R (Regular)
    ab
    13.66€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • DLC HSS Mill 2DLCHE

    DLC HSS Mill 2DLCHE

    NACHI(FUJIKOSHI)

    End-mill for aluminum. Suitable for grooving.

    ab
    19.32€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • G Medium End Mill 2-Flute 2MGE

    G Medium End Mill 2-Flute 2MGE

    NACHI(FUJIKOSHI)

    General-purpose coating end-mill.

    ab
    21.02€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • End Mill (Multi-Flute Center-Cutting Long Type), CC-EML

    End Mill (Multi-Flute Center-Cutting Long Type), CC-EML

    OSG

    30°helix angle, cobalt high-speed steel square, long size.

    • Mengenrabatt
    ab
    19.92€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SG-FAX End Mill 4-Flute 4SGE

    SG-FAX End Mill 4-Flute 4SGE

    NACHI(FUJIKOSHI)

    Performs high-speed, high-efficiency machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for side surface processing.

    ab
    32.65€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • XPM End Mill (High-Helix Short Type), XPM-EHS

    XPM End Mill (High-Helix Short Type), XPM-EHS

    OSG

    Sharp high helix series. Base material adopts powdered HSS XPM

    • Mengenrabatt
    ab
    26.73€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

  • Blade diameter (D)(φ)

    • 0.4~0.95
      • 0.4
      • 0.45
      • 0.55
      • 0.65
      • 0.7
      • 0.75
      • 0.8
      • 0.85
      • 0.9
      • 0.95
    • 1~1.95
      • 1
      • 1/2
      • 1.05
      • 1.1
      • 1.15
      • 1.2
      • 1.25
      • 1.3
      • 1.35
      • 1.4
      • 1.45
      • 1.5
      • 1.55
      • 1.59
      • 1.6
      • 1.65
      • 1.7
      • 1.75
      • 1.8
      • 1.85
      • 1.9
      • 1.95
    • 2~2.95
      • 2
      • 2.05
      • 2.1
      • 2.15
      • 2.2
      • 2.25
      • 2.3
      • 2.35
      • 2.38
      • 2.4
      • 2.45
      • 2.5
      • 2.55
      • 2.6
      • 2.65
      • 2.7
      • 2.75
      • 2.8
      • 2.85
      • 2.9
      • 2.95
    • 3~3.97
      • 3
      • 3/4
      • 3.05
      • 3.1
      • 3.15
      • 3.18
      • 3.2
      • 3.25
      • 3.3
      • 3.35
      • 3.4
      • 3.45
      • 3.5
      • 3.55
      • 3.6
      • 3.65
      • 3.7
      • 3.75
      • 3.8
      • 3.85
      • 3.9
      • 3.95
      • 3.97
    • 4~4.95
      • 4
      • 4.05
      • 4.1
      • 4.15
      • 4.2
      • 4.25
      • 4.3
      • 4.35
      • 4.4
      • 4.45
      • 4.5
      • 4.55
      • 4.6
      • 4.65
      • 4.7
      • 4.75
      • 4.76
      • 4.8
      • 4.85
      • 4.9
      • 4.95
    • 5~5.95
      • 5
      • 5/8
      • 5.05
      • 5.1
      • 5.15
      • 5.2
      • 5.25
      • 5.3
      • 5.35
      • 5.4
      • 5.45
      • 5.5
      • 5.55
      • 5.56
      • 5.6
      • 5.65
      • 5.7
      • 5.75
      • 5.8
      • 5.85
      • 5.9
      • 5.95
    • 6~6.95
      • 6
      • 6.05
      • 6.1
      • 6.15
      • 6.2
      • 6.25
      • 6.3
      • 6.35
      • 6.4
      • 6.45
      • 6.5
      • 6.55
      • 6.6
      • 6.65
      • 6.7
      • 6.75
      • 6.8
      • 6.85
      • 6.9
      • 6.95
    • 7~7.95
      • 7
      • 7/8
      • 7.05
      • 7.1
      • 7.15
      • 7.2
      • 7.25
      • 7.3
      • 7.35
      • 7.4
      • 7.45
      • 7.5
      • 7.55
      • 7.6
      • 7.65
      • 7.7
      • 7.75
      • 7.8
      • 7.85
      • 7.9
      • 7.94
      • 7.95
    • 8~8.95
      • 8
      • 8.05
      • 8.1
      • 8.15
      • 8.2
      • 8.25
      • 8.3
      • 8.35
      • 8.4
      • 8.45
      • 8.5
      • 8.55
      • 8.6
      • 8.65
      • 8.7
      • 8.75
      • 8.8
      • 8.85
      • 8.9
      • 8.95
    • 9~9.95
      • 9
      • 9.05
      • 9.1
      • 9.15
      • 9.2
      • 9.25
      • 9.3
      • 9.35
      • 9.4
      • 9.45
      • 9.5
      • 9.53
      • 9.55
      • 9.6
      • 9.65
      • 9.7
      • 9.75
      • 9.8
      • 9.85
      • 9.9
      • 9.95
    • 10~10.9
      • 10
      • 10.1
      • 10.2
      • 10.3
      • 10.4
      • 10.5
      • 10.6
      • 10.7
      • 10.8
      • 10.9
    • 11~11.9
      • 11
      • 11.1
      • 11.11
      • 11.2
      • 11.3
      • 11.4
      • 11.5
      • 11.6
      • 11.7
      • 11.8
      • 11.9
    • 12~12.9
      • 12
      • 12.1
      • 12.2
      • 12.3
      • 12.4
      • 12.5
      • 12.6
      • 12.7
      • 12.8
      • 12.9
    • 13~13.9
      • 13
      • 13.1
      • 13.2
      • 13.3
      • 13.4
      • 13.5
      • 13.6
      • 13.7
      • 13.8
      • 13.9
    • 14~14.9
      • 14
      • 14.1
      • 14.2
      • 14.29
      • 14.3
      • 14.4
      • 14.5
      • 14.6
      • 14.7
      • 14.8
      • 14.9
    • 15~15.9
      • 15
      • 15.1
      • 15.2
      • 15.3
      • 15.4
      • 15.5
      • 15.6
      • 15.7
      • 15.8
      • 15.88
      • 15.9
    • 16~16.9
      • 16
      • 16.1
      • 16.2
      • 16.3
      • 16.4
      • 16.5
      • 16.6
      • 16.7
      • 16.8
      • 16.9
    • 17~17.9
      • 17
      • 17.1
      • 17.2
      • 17.3
      • 17.4
      • 17.46
      • 17.5
      • 17.6
      • 17.7
      • 17.8
      • 17.9
    • 18~18.9
      • 18
      • 18.1
      • 18.2
      • 18.3
      • 18.4
      • 18.5
      • 18.6
      • 18.7
      • 18.8
      • 18.9
    • 19~19.9
      • 19
      • 19.05
      • 19.1
      • 19.2
      • 19.3
      • 19.4
      • 19.5
      • 19.6
      • 19.7
      • 19.8
      • 19.9
    • 20~20.9
      • 20
      • 20.1
      • 20.2
      • 20.3
      • 20.4
      • 20.5
      • 20.6
      • 20.64
      • 20.7
      • 20.8
      • 20.9
    • 21~21.9
      • 21
      • 21.1
      • 21.2
      • 21.3
      • 21.4
      • 21.5
      • 21.6
      • 21.7
      • 21.8
      • 21.9
    • 22~22.9
      • 22
      • 22.1
      • 22.2
      • 22.23
      • 22.3
      • 22.4
      • 22.5
      • 22.6
      • 22.7
      • 22.8
      • 22.9
    • 23~23.9
      • 23
      • 23.1
      • 23.2
      • 23.3
      • 23.4
      • 23.5
      • 23.6
      • 23.7
      • 23.8
      • 23.81
      • 23.9
    • 24~24.9
      • 24
      • 24.1
      • 24.2
      • 24.3
      • 24.4
      • 24.5
      • 24.6
      • 24.7
      • 24.8
      • 24.9
    • 25~25.9
      • 25
      • 25.1
      • 25.2
      • 25.3
      • 25.4
      • 25.5
      • 25.6
      • 25.7
      • 25.8
      • 25.9
    • 26~26.9
      • 26
      • 26.1
      • 26.2
      • 26.3
      • 26.4
      • 26.5
      • 26.6
      • 26.7
      • 26.8
      • 26.9
    • 27~27.9
      • 27
      • 27.1
      • 27.2
      • 27.3
      • 27.4
      • 27.5
      • 27.6
      • 27.7
      • 27.8
      • 27.9
    • 28~28.9
      • 28
      • 28.1
      • 28.2
      • 28.3
      • 28.4
      • 28.5
      • 28.6
      • 28.7
      • 28.8
      • 28.9
    • 29~29.9
      • 29
      • 29.1
      • 29.2
      • 29.3
      • 29.4
      • 29.5
      • 29.6
      • 29.7
      • 29.8
      • 29.9
    • 30~30.9
      • 30
      • 30.1
      • 30.2
      • 30.3
      • 30.4
      • 30.5
      • 30.6
      • 30.7
      • 30.8
      • 30.9
    • 31~31.9
      • 31
      • 31.1
      • 31.2
      • 31.3
      • 31.4
      • 31.5
      • 31.6
      • 31.7
      • 31.75
      • 31.8
      • 31.9
    • 32~32.9
      • 32
      • 32.1
      • 32.2
      • 32.3
      • 32.4
      • 32.5
      • 32.6
      • 32.7
      • 32.8
      • 32.9
    • 33~33.9
      • 33
      • 33.1
      • 33.2
      • 33.3
      • 33.4
      • 33.5
      • 33.6
      • 33.7
      • 33.8
      • 33.9
    • 34~34.9
      • 34
      • 34.1
      • 34.2
      • 34.3
      • 34.4
      • 34.5
      • 34.6
      • 34.7
      • 34.8
      • 34.9
    • 35~35.9
      • 35
      • 35.1
      • 35.2
      • 35.3
      • 35.4
      • 35.5
      • 35.6
      • 35.7
      • 35.8
      • 35.9
    • 36~36.9
      • 36
      • 36.1
      • 36.2
      • 36.3
      • 36.4
      • 36.5
      • 36.6
      • 36.7
      • 36.8
      • 36.9
    • 37~37.9
      • 37
      • 37.1
      • 37.2
      • 37.3
      • 37.4
      • 37.5
      • 37.6
      • 37.7
      • 37.8
      • 37.9
    • 38~38.9
      • 38
      • 38.1
      • 38.2
      • 38.3
      • 38.4
      • 38.5
      • 38.6
      • 38.7
      • 38.8
      • 38.9
    • 39~39.9
      • 39
      • 39.1
      • 39.2
      • 39.3
      • 39.4
      • 39.5
      • 39.6
      • 39.7
      • 39.8
      • 39.9
    • 40~40.9
      • 40
      • 40.1
      • 40.2
      • 40.3
      • 40.4
      • 40.5
      • 40.6
      • 40.7
      • 40.8
      • 40.9
    • 41~41.9
      • 41
      • 41.1
      • 41.2
      • 41.3
      • 41.4
      • 41.5
      • 41.6
      • 41.7
      • 41.8
      • 41.9
    • 42~42.9
      • 42
      • 42.1
      • 42.2
      • 42.3
      • 42.4
      • 42.5
      • 42.6
      • 42.7
      • 42.8
      • 42.9
    • 43~43.9
      • 43
      • 43.1
      • 43.2
      • 43.3
      • 43.4
      • 43.5
      • 43.6
      • 43.7
      • 43.8
      • 43.9
    • 44~44.9
      • 44
      • 44.1
      • 44.2
      • 44.3
      • 44.4
      • 44.5
      • 44.6
      • 44.7
      • 44.8
      • 44.9
    • 45~45.5
      • 45
      • 45.5
    • 46~46.5
      • 46
      • 46.5
    • 47~47.5
      • 47
      • 47.5
    • 48~48.5
      • 48
      • 48.5
    • 49~49.5
      • 49
      • 49.5
    • 50~50.8
      • 50
      • 50.5
      • 50.8
    • 51
    • 52
    • 53
    • 54
    • 55
    • 56
    • 57
    • 58
    • 59
    • 60
    • 61
    • 62
    • 63
    • 64
    • 65
    • 66
    • 67
    • 68
    • 69
    • 70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 77
    • 78
    • 79
    • 80
    • 85
    • 90
    • 95
    • 100
    [2.7-3/0.01φ-Schritte] [3.15-3.5/0.01φ-Schritte] [3.6-4/0.01φ-Schritte] [4.05-16/0.01φ-Schritte] [4.51-6.5/0.01φ-Schritte] [6.51-9.5/0.01φ-Schritte] [9.51-12/0.01φ-Schritte] [12.01-14.99/0.01φ-Schritte] [15.01-16/0.01φ-Schritte] [17-19.99/0.01φ-Schritte] [19.01-19.99/0.01φ-Schritte] [20.01-22.99/0.01φ-Schritte] [24-25/0.01φ-Schritte]
  • Blade length (ℓ)(mm)

    • 0.8
    • 1.1
    • 1.4
    • 1.5
    • 1.6
    • 1.8
    • 2
    • 2.2
    • 2.5
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 7.5
    • 8
    • 9
    • 10
    • 10.5
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
    • 17
    • 18
    • 19
    • 20
    • 22
    • 24
    • 25
    • 26
    • 28
    • 30
    • 32
    • 33
    • 34
    • 35
    • 36
    • 38
    • 39
    • 40
    • 45
    • 48
    • 50
    • 53
    • 55
    • 56
    • 58
    • 60
    • 63
    • 65
    • 67
    • 68
    • 70
    • 75
    • 80
    • 85
    • 90
    • 95
    • 100
    • 105
    • 106
    • 110
    • 112
    • 115
    • 120
    • 122
    • 125
    • 130
    • 145
    • 150
    • 155
    • 160
    • 180
    • 200
    • 205
    • 212
    • 250
    • 255
    • 300
  • work material

  • Blade shape type

  • Number of flutes(sheet)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 14
    • 16
    • 18
  • Tool Material Type

  • Machining Application

  • Shank diameter (d)(mm)

    • 5
    • BS5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 15
    • 16
    • 19
    • 20
    • 24
    • 25
    • 25F
    • 32
    • 32F
    • 42
    • 42F
    • 50.8
  • Coating

  • Overall Length (L)(mm)

    • 42~48
      • 42
      • 45
      • 48
    • 50~59
      • 50
      • 51
      • 52
      • 53
      • 54
      • 55
      • 56
      • 57
      • 58
      • 59
    • 60~69
      • 60
      • 62
      • 63
      • 64
      • 65
      • 66
      • 67
      • 68
      • 69
    • 70~79
      • 70
      • 72
      • 73
      • 74
      • 75
      • 76
      • 77
      • 78
      • 79
    • 80~89
      • 80
      • 82
      • 83
      • 84
      • 85
      • 86
      • 88
      • 89
    • 90~97
      • 90
      • 91
      • 92
      • 95
      • 97
    • 100~108
      • 100
      • 101
      • 102
      • 104
      • 105
      • 108
    • 110~119
      • 110
      • 115
      • 116
      • 119
    • 120~127
      • 120
      • 121
      • 122
      • 123
      • 124
      • 125
      • 127
    • 130~137
      • 130
      • 132
      • 133
      • 134
      • 135
      • 137
    • 140~149
      • 140
      • 141
      • 142
      • 143
      • 144
      • 145
      • 147
      • 149
    • 150~155
      • 150
      • 154
      • 155
    • 160~169
      • 160
      • 162
      • 165
      • 166
      • 169
    • 170~178
      • 170
      • 173
      • 175
      • 177
      • 178
    • 180~189
      • 180
      • 182
      • 183
      • 184
      • 185
      • 186
      • 188
      • 189
    • 190~198
      • 190
      • 191
      • 192
      • 193
      • 195
      • 197
      • 198
    • 200~208
      • 200
      • 202
      • 203
      • 205
      • 208
    • 210~215
      • 210
      • 213
      • 214
      • 215
    • 220~227
      • 220
      • 222
      • 224
      • 225
      • 227
    • 230~235.5
      • 230
      • 233
      • 235
      • 235.5
    • 240~245.5
      • 240
      • 245
      • 245.5
    • 250~255
      • 250
      • 250.5
      • 252
      • 253
      • 255
    • 260~265
      • 260
      • 265
    • 270~275
      • 270
      • 275
    • 280~288
      • 280
      • 282
      • 283
      • 285
      • 288
    • 290~295
      • 290
      • 295
    • 300~305
      • 300
      • 305
    • 310~315
      • 310
      • 314
      • 315
    • 320
    • 335
    • 340~345
      • 340
      • 345
    • 350~355
      • 350
      • 355
    • 370
    • 385
    • 390~395
      • 390
      • 395
    • 400
    • 420
  • Torsion Angle (θ)

  • Base Blade Y/N

  • Underneck length (ℓ1)(mm)

    • 10
    • 12
    • 14
    • 17
    • 22
    • 23
    • 27
    • 28
    • 29
    • 37
    • 38
    • 40
    • 44
    • 45
    • 46
    • 48
    • 49
    • 53
    • 54
    • 56
    • 57
    • 58
    • 60
    • 62
    • 64
    • 65
    • 66
    • 70
    • 72
    • 75
    • 80
    • 88
    • 90
    • 95
    • 100
    • 112
    • 113
    • 115
  • shank

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen