• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Fräse / Wendeschaftfräser(Seite4)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • 11 Tage oder weniger
  • SEC-Metal Slash Mill MSX06000E Model

    SEC-Metal Slash Mill MSX06000E Model

    SUMITOMO ELECTRIC HARDMETAL

    Multi-functional cutter which dramatically increased the efficiency in various touring by enabling the crude processing at ultra-high feed.

    ab
    162.53€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • DGC-R for SEC-Sumi Dual Mill DGC Type

    DGC-R for SEC-Sumi Dual Mill DGC Type

    SUMITOMO ELECTRIC HARDMETAL

    By employing maximum 16-corner inserts on both sides, it has excellent economical efficiency.

    ab
    218.69€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Sumi Power Mill for PWC Series PWC-R

    SEC-Sumi Power Mill for PWC Series PWC-R

    SUMITOMO ELECTRIC HARDMETAL

    For High Efficiency Semi-Shoulder Machining of Cast Iron

    ab
    495.00€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Sumi Power Mill for PWS Series PWS-R

    SEC-Sumi Power Mill for PWS Series PWS-R

    SUMITOMO ELECTRIC HARDMETAL

    Vertical insert equipped with high reliability corner shaving cutters that combine high cutting edge power and sharpness.

    ab
    436.81€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Metal Slash Mill MSX Model MSX-E

    SEC-Metal Slash Mill MSX Model MSX-E

    SUMITOMO ELECTRIC HARDMETAL

    Multi-functional cutter which dramatically increased the efficiency in various touring by enabling the crude processing at ultra-high feed.

    ab
    200.15€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • For SEC-Wave Mill WGC Type WGC(F)-RS

    For SEC-Wave Mill WGC Type WGC(F)-RS

    SUMITOMO ELECTRIC HARDMETAL

    A general use cutter with a wide range of uses and world beater level performance and machining precision.

    ab
    151.08€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Wave Radius Mill for WRCX Series WRCXF-RS

    SEC-Wave Radius Mill for WRCX Series WRCXF-RS

    SUMITOMO ELECTRIC HARDMETAL

    Multi-function cutter that achieves high efficiency in various processing such as mold engraving, tilt machining, helical processing.

    ab
    273.22€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Milling Cutters for Shoulder Cutting (General Cutting for Steel / Cast Iron) Micro Face

    Milling Cutters for Shoulder Cutting (General Cutting for Steel / Cast Iron) Micro Face

    OSG

    Throw-away type tools with high rigidity body and inserts.

    ab
    1,304.92€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Milling Cutters for Shoulder Cutting (General Cutting for Steel / Cast Iron) Standard

    Milling Cutters for Shoulder Cutting (General Cutting for Steel / Cast Iron) Standard

    OSG

    Throw-away type tools with high rigidity body and inserts.

    ab
    1,042.42€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • F3000 Series for Positive End Mill

    F3000 Series for Positive End Mill

    OSG

    End mill type cutter that uses 3-dimensional breaker inserts of good sharpness. Possible high-efficiency, multi-functional machining of aluminum material (helical machining, ramping, pocketing, side milling, grooving).

    ab
    375.00€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Side Cutter Series, Half Side Cutter, Single Positive Edge

    Side Cutter Series, Half Side Cutter, Single Positive Edge

    OSG

    Throw-away type tools with high rigidity body and inserts.

    ab
    1,799.92€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Phoenix Series High Feed Radius Cutters Bore Type

    Phoenix Series High Feed Radius Cutters Bore Type

    OSG

    PHC bore type radius cutter. Machining Application: Flat Surfaces, Side Surfaces, Grooving, Digging and Form Cutting

    ab
    307.50€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Roughing Series Radius Cutter Bull Nose Cutter Straight Shank

    Roughing Series Radius Cutter Bull Nose Cutter Straight Shank

    OSG

    Radius cutters suited for high-speed three-dimensional machining; superior rigidity of tip and clamp. With oil holes.

    ab
    654.75€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Small Diameter Cutter Series Octagon Cutter MINI Shell Type

    Small Diameter Cutter Series Octagon Cutter MINI Shell Type

    OSG

    Small diameter cutter series Octagon Mini.

    ab
    390.00€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Small Diameter Cutter Series Cutter Routing Cutter Multi-Function Type

    Small Diameter Cutter Series Cutter Routing Cutter Multi-Function Type

    OSG

    An end-mill with center blade that can feed towards the Z direction. Enables various processing such as contouring processing.

    ab
    188.17€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Phoenix Series Roughing End Mills Straight Shank Type
    ab
    582.17€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Phoenix Series 4-Corner Shoulder Cutting Cutters Straight Shank Type
    ab
    213.58€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • CoroMill 290 Cutter

    CoroMill 290 Cutter

    SANDVIK

    Suitable for high efficiency machining.

    ab
    358.00€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • CoroMill 328 Cutter

    CoroMill 328 Cutter

    SANDVIK

    Suitable for high efficiency machining.

    ab
    284.25€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • CoroMill 390 Cutter

    CoroMill 390 Cutter

    SANDVIK

    Suitable for high efficiency machining.

    ab
    443.33€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Model ALX Aero Chipper, for Bore Type Milling Cutter

    Model ALX Aero Chipper, for Bore Type Milling Cutter

    DIJET

    Excellent tool abrasion resistance.

    ab
    488.00€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Super Diemaster, Model HDM, Bore Type Milling Cutter / Regular Type

    Super Diemaster, Model HDM, Bore Type Milling Cutter / Regular Type

    DIJET

    Capable of Dealing With Cast Iron / Standard Steel to Stainless Steel / Titanium / Inconel

    ab
    300.17€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hosoi Chipper "S" SHC-S Shape

    Hosoi Chipper "S" SHC-S Shape

    DIJET

    Excellent tool abrasion resistance.

    ab
    334.95€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • High Feed Die Master (With Shim) SKS-RS Type

    High Feed Die Master (With Shim) SKS-RS Type

    DIJET

    Excellent tool abrasion resistance.

    ab
    612.08€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • QM Max Modular Head MQX

    QM Max Modular Head MQX

    DIJET

    Suitable for high efficiency machining.

    ab
    153.33€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Mirror Ball C Body BNM

    Mirror Ball C Body BNM

    DIJET

    For high-precision machining.

    ab
    198.67€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Swing Ball, Model SWB, Straight Shank Type
    ab
    344.83€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Super End Chipper Model SEC, Long / Extra Long / MT Shank / Weldon Shank Type
    ab
    254.67€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Aeromill (Negative Type)

    Aeromill (Negative Type)

    FUJIGEN

    With a line-up of small diameter shanks, allows use for small size machining.

    ab
    187.92€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • New Nice Cut (NT Type)

    New Nice Cut (NT Type)

    FUJIGEN

    [Features] The Return of Innovative Evolution! Two types, 3-flute and 6-flute, support high-speed cutting. The machining diameter can be changed by simply exchanging the base, and the type of machining can be also be changed easily by exchanging the arm. A Multi-Structure Supporting 3 Types: NS (Negative S Type), PS (Positive S Type), and NT (Negative T Type)

    ab
    563.75€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Ace Mill DNF4000 Model

    SEC-Ace Mill DNF4000 Model

    SUMITOMO ELECTRIC HARDMETAL

    For general cutting of steel and cast iron

    ab
    240.00€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Sumidia Cutter, Model FAM (Body)

    Sumidia Cutter, Model FAM (Body)

    SUMITOMO ELECTRIC HARDMETAL

    Superior cutting performance is realized through cutting edge design suitable for processing aluminum alloys and nonferrous metal materials. High blade run out precision can be adjusted and processed finished surface quality is improved.

    ab
    363.00€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Sumidia Cutter, Model SAM-E, Mini-Type with Handle

    Sumidia Cutter, Model SAM-E, Mini-Type with Handle

    SUMITOMO ELECTRIC HARDMETAL

    High Stiffness Body Design With Excellent Cutting Ability, Durability, and High Blade Touch Precision

    ab
    333.00€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Cutter for Cutting Difficult-To-Cut Materials

    Cutter for Cutting Difficult-To-Cut Materials

    SUMITOMO ELECTRIC HARDMETAL

    Cut hard-to-cut materials like stainless steel and inconel.

    ab
    357.52€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • DGCM-R for SEC-Sumi Dual Mill DGC Type

    DGCM-R for SEC-Sumi Dual Mill DGC Type

    SUMITOMO ELECTRIC HARDMETAL

    By employing maximum 16-corner inserts on both sides, it has excellent economical efficiency.

    ab
    273.22€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Sumi Power Mill for PWC Series PWCF-R

    SEC-Sumi Power Mill for PWC Series PWCF-R

    SUMITOMO ELECTRIC HARDMETAL

    For High Efficiency Semi-Shoulder Machining of Cast Iron

    ab
    595.05€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • For SEC-Wave Mill WGX Type WGX-EW

    For SEC-Wave Mill WGX Type WGX-EW

    SUMITOMO ELECTRIC HARDMETAL

    Dedicated breaker achieves low resistance. For general machining of steel / cast iron.

    ab
    207.79€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Wave Radius Mill for WRCX Series WRCX-M-Z

    SEC-Wave Radius Mill for WRCX Series WRCX-M-Z

    SUMITOMO ELECTRIC HARDMETAL

    Multi-function cutter that achieves high efficiency in various processing such as mold engraving, tilt machining, helical processing.

    ab
    219.79€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Wave Repeater for WRX Series WRX-E

    SEC-Wave Repeater for WRX Series WRX-E

    SUMITOMO ELECTRIC HARDMETAL

    Achieves low-resistant low-vibration machining by optimizing the flute arrangement. With lead and special pocket design, achieves both smooth chip discharge and high body rigidity.

    ab
    355.02€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • For SEC-Wave Mill WEX Type WEX-M-Z

    For SEC-Wave Mill WEX Type WEX-M-Z

    SUMITOMO ELECTRIC HARDMETAL

    A variety of combinations corresponding with carbide arbor and steel arbor. It can be easily exchanged with screw stopper type.

    ab
    137.45€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Wave Mill WAX3000 Model for Insert Edge Nose Radius of 3.2 or less

    SEC-Wave Mill WAX3000 Model for Insert Edge Nose Radius of 3.2 or less

    SUMITOMO ELECTRIC HARDMETAL

    High speed/high efficiency processing cutter that can do rough processing to finishing processing of aluminum alloys and nonferrous metals.

    ab
    399.74€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Wave Mill WAX4000E / EL Model for Insert Edge Nose Radius of 3.2 or less

    SEC-Wave Mill WAX4000E / EL Model for Insert Edge Nose Radius of 3.2 or less

    SUMITOMO ELECTRIC HARDMETAL

    High speed/high efficiency processing cutter that can do rough processing to finishing processing of aluminum alloys and nonferrous metals.

    ab
    273.78€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Wave Mill WAX4000 Model for Insert Edge Nose Radius of 4.0 or More

    SEC-Wave Mill WAX4000 Model for Insert Edge Nose Radius of 4.0 or More

    SUMITOMO ELECTRIC HARDMETAL

    High speed/high efficiency processing cutter that can do rough processing to finishing processing of aluminum alloys and nonferrous metals.

    ab
    381.74€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Wave Multi-Purpose Long Type / with Air Hole WMM2000ELH

    SEC-Wave Multi-Purpose Long Type / with Air Hole WMM2000ELH

    SUMITOMO ELECTRIC HARDMETAL

    Shoulder milling, grooving, and of course thrust processing possible with a single piece. Suitable for high-efficiency machining in incline processing, helical drilling, and pocket machining.

    ab
    208.34€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Wave Multi-Purpose Long Type WMM3000EL

    SEC-Wave Multi-Purpose Long Type WMM3000EL

    SUMITOMO ELECTRIC HARDMETAL

    Shoulder milling, grooving, and of course thrust processing possible with a single piece. Suitable for high-efficiency machining in incline processing, helical drilling, and pocket machining.

    ab
    181.07€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

  • Processing Applications

  • Flute Diameter D(φ)

    • 6
    • 7
    • 8
    • 10
    • 10 mm
    • 11.68 mm
    • 12
    • 12 mm
    • 13.2
    • 13.4
    • 14
    • 15
    • 15 mm
    • 15.4
    • 16
    • 16 mm
    • 16.2
    • 17
    • 18
    • 18 mm
    • 18.2
    • 18.4
    • 18.9
    • 20
    • 20 mm
    • 20.2
    • 21
    • 22
    • 22 mm
    • 23.2
    • 23.4
    • 23.8
    • 24
    • 24 mm
    • 25
    • 25 mm
    • 26
    • 28
    • 28 mm
    • 28.2
    • 30
    • 30 mm
    • 30.7
    • 32
    • 32 mm
    • 32.5 mm
    • 33
    • 33.4
    • 34
    • 35
    • 35 mm
    • 36
    • 36.47 mm
    • 37
    • 38
    • 38.2
    • 39
    • 40
    • 40 mm
    • 40(42.9)
    • 40.7
    • 42
    • 42 mm
    • 43
    • 44
    • 44 mm
    • 46.4
    • 47
    • 48.7
    • 50
    • 50 (52.9)
    • 50 mm
    • 51
    • 51.2
    • 52
    • 52 mm
    • 53.7
    • 54 mm
    • 54.08 mm
    • 55
    • 56.7 mm
    • 60
    • 61.7
    • 62.5 mm
    • 63
    • 63 (65.9)
    • 63 mm
    • 63.4
    • 64
    • 64.08 mm
    • 65
    • 66
    • 66 mm
    • 68
    • 69.7 mm
    • 70
    • 72
    • 75
    • 75.5 mm
    • 77.08 mm
    • 78.08 mm
    • 78.7
    • 80
    • 80 (82.9)
    • 80 mm
    • 83.4
    • 84
    • 84 mm
    • 86.7 mm
    • 88
    • 90
    • 92 mm
    • 92.5mm
    • 94.08 mm
    • 98.7
    • 98.8 mm
    • 100
    • 100 (102.9)
    • 100 mm
    • 101.3 mm
    • 105
    • 106.7 mm
    • 110
    • 112 mm
    • 112.5 mm
    • 114.08 mm
    • 118.8 mm
    • 123.7
    • 125
    • 125 (127.9)
    • 125 mm
    • 130
    • 131.4 mm
    • 131.7 mm
    • 137.5 mm
    • 138.8 mm
    • 139.08 mm
    • 140
    • 143.8 mm
    • 145.2 mm
    • 150
    • 157
    • 160
    • 160 (162.9)
    • 160 mm
    • 166.4 mm
    • 166.7 mm
    • 172.5 mm
    • 174.08 mm
    • 178.8 mm
    • 180
    • 180.2 mm
    • 200
    • 200 (202.9)
    • 200 mm
    • 205.6 mm
    • 212.5 mm
    • 214.08 mm
    • 218.8 mm
    • 220.2 mm
    • 250
    • 250 (252.9)
    • 250 mm
    • 255.6 mm
    • 262.5 mm
    • 264.08 mm
    • 268.8 mm
    • 315
  • Work Material

  • Mounting Method

  • Finish Classification

  • Overall Length (L)(mm)

    • 26~27
      • 26
      • 27
    • 32~38
      • 32
      • 33
      • 35
      • 38
    • 40~49
      • 40
      • 42
      • 43
      • 45
      • 49
    • 50~57
      • 50
      • 53
      • 54
      • 55
      • 56
      • 57
    • 60~68
      • 60
      • 63
      • 68
    • 70~77.7
      • 70
      • 73
      • 74
      • 75
      • 76
      • 77.7
    • 80~88
      • 80
      • 81
      • 82
      • 83
      • 84
      • 84.7
      • 85
      • 88
    • 90~98.7
      • 90
      • 91
      • 92
      • 93
      • 95
      • 98
      • 98.7
    • 100~109
      • 100
      • 104
      • 105
      • 107
      • 108
      • 109
    • 110~117
      • 110
      • 111
      • 112
      • 115
      • 117
    • 120~127
      • 120
      • 121
      • 123
      • 123.5
      • 124
      • 125
      • 125.2
      • 126
      • 127
    • 130~137
      • 130
      • 131
      • 132
      • 133
      • 134
      • 134.6
      • 135
      • 137
    • 140~147.5
      • 140
      • 141
      • 144
      • 145
      • 145.2
      • 147
      • 147.5
    • 150~155
      • 150
      • 155
    • 160~166
      • 160
      • 161
      • 165
      • 166
    • 170~175
      • 170
      • 171
      • 173
      • 175
    • 180~186
      • 180
      • 184.6
      • 185
      • 186
    • 190~191
      • 190
      • 191
    • 200~207
      • 200
      • 203.8
      • 207
    • 210~217
      • 210
      • 215
      • 217
    • 220~228
      • 220
      • 221
      • 223.8
      • 224
      • 228
    • 230~232
      • 230
      • 232
    • 240~249.5
      • 240
      • 243.8
      • 245
      • 247
      • 248
      • 249.5
    • 250~258
      • 250
      • 256
      • 257
      • 258
    • 260~268
      • 260
      • 262
      • 268
    • 270~278
      • 270
      • 275
      • 278
    • 280~284
      • 280
      • 284
    • 290~299.5
      • 290
      • 299.5
    • 300~306
      • 300
      • 306
    • 329
    • 350
  • Link Diameter (d)(mm)

    • MT5
    • MT5-M16
    • MT5-M24
    • 6
    • 8
    • 8.5
    • 10
    • 10.5
    • 12
    • 12.5
    • 15
    • 16
    • 17
    • 18
    • 20
    • 22
    • 23
    • 25
    • 25.4
    • 27
    • 28
    • 31.75
    • 31.8
    • 32
    • 35
    • 38.1
    • 40
    • 42
    • 44
    • 47.6
    • 47.62
    • 47.625
    • 50
    • 50.8
    • CN50.8
    • 55
    • 60
    • 180
    • 210
  • Number of Flutes(Pieces)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 8/2
    • 9
    • 10
    • 11
    • 12
    • 14
    • 15
    • 16
    • 16/4
    • 18
    • 20
    • 22
    • 24
    • 26
    • 28
    • 32
    • 36
  • Supported Tip Material Type

  • Max. Cutting Depth (Ad)(mm)

    • 0.1 ~ 0.4
    • 0.5
    • 0.7
    • 1
    • 1.2
    • 1.5
    • 2
    • 2.4
    • 2.5
    • 3
    • 3 (SumiDia Tip is Used), 10 (Carbide Tip is Used)
    • 4
    • 5
    • 5.5
    • 5.7
    • 5.8
    • 6
    • 6 (SNMT / SNET Tip) / 3 (ONMT / ONE Tip)
    • 6.5
    • 7
    • 7.5
    • 7.9/8.08
    • 8
    • 8 ~ 19
    • 8.9
    • 9
    • 9 ~ 22
    • 9.5
    • 9.6/9.99
    • 10
    • 10.7
    • 10.8
    • 11
    • 13
    • 14
    • 14.4
    • 14.5
    • 15
    • 15.4
    • 15.7
    • 16
    • 16 ~ 18
    • 17
    • 17 ~ 35
    • 17.9
    • 18
    • 18 ~ 36
    • 19
    • 20
    • 20 ~ 47
    • 22
    • 22.3
    • 23
    • 24
    • 26.9
    • 27
    • 28.6
    • 29.5
    • 30
    • 30 ~ 69
    • 35
    • 36
    • 36.5
    • 39
    • 41
    • 44
    • 44.6
    • 53
    • 57
  • Length Under Neck (ℓ1)(mm)

    • 4
    • 9
    • 10
    • 11
    • 15
    • 17
    • 18
    • 20
    • 22
    • 23
    • 24
    • 25
    • 25.7
    • 26
    • 27
    • 28
    • 30
    • 32
    • 32.7
    • 33
    • 34
    • 35
    • 36
    • 37.8
    • 38
    • 39
    • 40
    • 40.7
    • 43
    • 45
    • 50
    • 53
    • 54
    • 55
    • 56
    • 60
    • 62.5
    • 63
    • 64
    • 65
    • 69
    • 70
    • 72
    • 73
    • 75
    • 80
    • 82
    • 84
    • 85
    • 88
    • 90
    • 95
    • 96
    • 100
    • 105
    • 106
    • 110
    • 115
    • 120
    • 124
    • 125
    • 130
    • 135
    • 137.5
    • 140
    • 145
    • 150
    • 160
    • 165
    • 170
    • 176
    • 180
    • 184
    • 190
    • 200
    • 220
    • 250
    • 270

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen