• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Fräse / Wendeschaftfräser(Seite5)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • 11 Tage oder weniger
  • SEC-Wave Mill WAX3000 Model for Insert Edge Nose Radius of 3.2 or less

    SEC-Wave Mill WAX3000 Model for Insert Edge Nose Radius of 3.2 or less

    SUMITOMO ELECTRIC HARDMETAL

    High speed/high efficiency processing cutter that can do rough processing to finishing processing of aluminum alloys and nonferrous metals.

    ab
    386.50€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Wave Mill WAX4000E / EL Model for Insert Edge Nose Radius of 3.2 or less

    SEC-Wave Mill WAX4000E / EL Model for Insert Edge Nose Radius of 3.2 or less

    SUMITOMO ELECTRIC HARDMETAL

    High speed/high efficiency processing cutter that can do rough processing to finishing processing of aluminum alloys and nonferrous metals.

    ab
    264.58€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Wave Mill WAX4000 Model for Insert Edge Nose Radius of 4.0 or More

    SEC-Wave Mill WAX4000 Model for Insert Edge Nose Radius of 4.0 or More

    SUMITOMO ELECTRIC HARDMETAL

    High speed/high efficiency processing cutter that can do rough processing to finishing processing of aluminum alloys and nonferrous metals.

    ab
    369.08€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Wave Multi-Purpose Long Type / with Air Hole WMM2000ELH

    SEC-Wave Multi-Purpose Long Type / with Air Hole WMM2000ELH

    SUMITOMO ELECTRIC HARDMETAL

    Shoulder milling, grooving, and of course thrust processing possible with a single piece. Suitable for high-efficiency machining in incline processing, helical drilling, and pocket machining.

    ab
    206.48€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Wave Multi-Purpose Long Type WMM3000EL

    SEC-Wave Multi-Purpose Long Type WMM3000EL

    SUMITOMO ELECTRIC HARDMETAL

    Shoulder milling, grooving, and of course thrust processing possible with a single piece. Suitable for high-efficiency machining in incline processing, helical drilling, and pocket machining.

    ab
    177.62€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Wave Multi-Purpose Long Type / with Air Hole WMM3000ELH

    SEC-Wave Multi-Purpose Long Type / with Air Hole WMM3000ELH

    SUMITOMO ELECTRIC HARDMETAL

    Shoulder milling, grooving, and of course thrust processing possible with a single piece. Suitable for high-efficiency machining in incline processing, helical drilling, and pocket machining.

    ab
    231.22€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Metal Slash Mill (Modular Type) MSX08000M Model

    SEC-Metal Slash Mill (Modular Type) MSX08000M Model

    SUMITOMO ELECTRIC HARDMETAL

    Multi-functional cutter which dramatically increased the efficiency in various touring by enabling the crude processing at ultra-high feed.

    ab
    189.83€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SHE Shell End Mill G2

    SHE Shell End Mill G2

    ASAHI TOOLS

    Attach a large diameter φ50-125 EM main unit (blade part) to the arbor and use it

    • Mengenrabatt
    ab
    222.45€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • F3000 Series Milling Cutter F3000 Type

    F3000 Series Milling Cutter F3000 Type

    OSG

    Cartridge type. Face mill with 3 dimensional breaker chip. For general cutting of steel to aluminum.

    ab
    1,012.42€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • F4000 Series Porcupine Cutter, Shell Type

    F4000 Series Porcupine Cutter, Shell Type

    OSG

    Improved Corrosion Resistance by Applying a Special Surface Treatment to the Body

    ab
    1,158.25€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • F4000 Series, High-Rigidity Face Mill, F4033 Shell Type

    F4000 Series, High-Rigidity Face Mill, F4033 Shell Type

    OSG

    F4000 series, high rigidity type.

    ab
    776.17€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • F4000 Series, High-Rigidity Face Mill Cut Ridge

    F4000 Series, High-Rigidity Face Mill Cut Ridge

    OSG

    Throw-away type tools with high rigidity body and inserts.

    ab
    1,387.42€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • F3000 Series Positive Mill, Side Milling Cutter (Staggered Blades)

    F3000 Series Positive Mill, Side Milling Cutter (Staggered Blades)

    OSG

    Side cutter with adjustable flute width. Staggered blade (groove) cutter installing the cartridge of different liberty alternately

    ab
    1,567.42€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • F3000 Series Positive Mill, Neo Shell Type

    F3000 Series Positive Mill, Neo Shell Type

    OSG

    Shell type that uses 3-dimensional breaker inserts of good sharpness. For use with face mill arbor.

    ab
    578.58€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • F4000 Series Positive Mill, Shell Type

    F4000 Series Positive Mill, Shell Type

    OSG

    High efficiency cutter that achieves low cutting resistance, with adoption of strong torsion inserts. Used in face mill arbors.

    ab
    640.50€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • F4000 Series, High-Rigidity Shoulder Mill, Shell Type
    ab
    582.17€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Indexable Tool, Cyclone Type Milling Cutter (for General Cutting)

    Indexable Tool, Cyclone Type Milling Cutter (for General Cutting)

    OSG

    Cartridge type. General high rake type with low cutting resistance. Large depth of cut and high feed rate achieve high efficiency machining.

    ab
    1,012.42€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Phoenix Series High Feed Radius Cutters Threaded Type

    Phoenix Series High Feed Radius Cutters Threaded Type

    OSG

    PHC screw type radius cutter. Machining Application: Flat Surfaces, Side Surfaces, Grooving, Digging and Form Cutting

    ab
    389.48€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Small Diameter Cutter Series Octagon Cutter MINI Straight Shank

    Small Diameter Cutter Series Octagon Cutter MINI Straight Shank

    OSG

    Throw-away type tools with high rigidity body and inserts.

    ab
    391.67€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Phoenix Series Roughing End Mills Bore Type
    ab
    881.58€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • U-MAX Chamfering End Mill

    U-MAX Chamfering End Mill

    SANDVIK

    Suitable for high efficiency machining.

    ab
    250.83€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • Coromill 316 Head

    Coromill 316 Head

    SANDVIK

    Cutting edge is sharp and exhibits high performance.

    ab
    87.58€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • R Tipper ZPR-0203 Series

    R Tipper ZPR-0203 Series

    DIJET

    Excellent tool abrasion resistance.

    ab
    482.75€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Spalcut Mill, Model DLD90-4000, Hole Diameter in Inches

    Spalcut Mill, Model DLD90-4000, Hole Diameter in Inches

    DIJET

    Excellent tool abrasion resistance.

    ab
    730.42€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Spalcut Mill, Model DLD90H-4000

    Spalcut Mill, Model DLD90H-4000

    DIJET

    [Features] A Tool with Excellent Wear Resistance

    ab
    1,069.00€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Dimate DDM Type Shank Type Counterbores

    Dimate DDM Type Shank Type Counterbores

    DIJET

    [Features] Center-Through Support for Whole Series

    ab
    163.00€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Tips for Hosoi Chipper "S" SHC-C Type Peripheral Cutting Edge Attached
    ab
    430.42€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • High Feed Die Master SKS Type Bore Type Milling Cutter / Regular Type

    High Feed Die Master SKS Type Bore Type Milling Cutter / Regular Type

    DIJET

    Suitable for high efficiency machining.

    ab
    275.83€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hosoi Chipper, 2-Flute, 2-Corner Type, Straight Shank, SHCS

    Hosoi Chipper, 2-Flute, 2-Corner Type, Straight Shank, SHCS

    DIJET

    Suitable for high efficiency machining.

    ab
    302.58€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Mirror Radius End Mills RNML

    Mirror Radius End Mills RNML

    DIJET

    For high-precision machining.

    ab
    690.00€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Mirror Ball C Body BNM-T-C Shape
    ab
    250.00€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Mirror Ball C Body BNMU Shape
    ab
    442.00€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Dekasumi

    Dekasumi

    FUJIGEN

    Replacement tips enable various types of corner radius machining.

    ab
    202.33€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Skat Cut

    Skat Cut

    FUJIGEN

    May be used on 6 double sided corners for the negative.

    ab
    278.08€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Wave Mill WEX2000F Type

    SEC-Wave Mill WEX2000F Type

    SUMITOMO ELECTRIC HARDMETAL

    Special surface treatment improves both corrosion and abrasion resistance. Increased screw size improves clamp strength and durability.

    ab
    308.25€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Wave Radius Mill WRCX Type WRCX08000E

    SEC-Wave Radius Mill WRCX Type WRCX08000E

    SUMITOMO ELECTRIC HARDMETAL

    High durability body with special surface treatment greatly improves product life and reliability. Implements anti-vibration blade design that is highly resistant to chattering.

    ab
    140.50€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Wave Radius Mill WRCX Type WRCX10000E

    SEC-Wave Radius Mill WRCX Type WRCX10000E

    SUMITOMO ELECTRIC HARDMETAL

    High durability body with special surface treatment greatly improves product life and reliability. Implements anti-vibration blade design that is highly resistant to chattering.

    ab
    147.92€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Wave Radius Mill WRCX Type

    SEC-Wave Radius Mill WRCX Type

    SUMITOMO ELECTRIC HARDMETAL

    High durability body with special surface treatment greatly improves product life and reliability. Implements anti-vibration blade design that is highly resistant to chattering.

    ab
    140.50€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Sumidia Cutter, Model SAM (Body)

    Sumidia Cutter, Model SAM (Body)

    SUMITOMO ELECTRIC HARDMETAL

    Superior cutting performance is realized through cutting edge design suitable for processing aluminum alloys and nonferrous metal materials. High blade run out precision can be adjusted and processed finished surface quality is improved.

    ab
    363.00€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Metal Slash Mill MSX08000E Model

    SEC-Metal Slash Mill MSX08000E Model

    SUMITOMO ELECTRIC HARDMETAL

    Multi-functional cutter which dramatically increased the efficiency in various touring by enabling the crude processing at ultra-high feed.

    ab
    185.00€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Metal Slash Mill (Modular Type) MSX06000M Model

    SEC-Metal Slash Mill (Modular Type) MSX06000M Model

    SUMITOMO ELECTRIC HARDMETAL

    Multi-functional cutter which dramatically increased the efficiency in various touring by enabling the crude processing at ultra-high feed.

    ab
    158.33€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-Metal Slash Mill MSX08000R Model

    SEC-Metal Slash Mill MSX08000R Model

    SUMITOMO ELECTRIC HARDMETAL

    Multi-functional cutter which dramatically increased the efficiency in various touring by enabling the crude processing at ultra-high feed.

    ab
    274.58€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-DNHS 12000 Type for High Efficiency Processing of Cast Iron and Cast Steel

    SEC-DNHS 12000 Type for High Efficiency Processing of Cast Iron and Cast Steel

    SUMITOMO ELECTRIC HARDMETAL

    Achieves high efficiency machining with a maximum cutting ability of 8 mm. For high efficiency machining of cast iron, cast steel

    ab
    500.55€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SEC-DNH 12000 Model for High Efficiency Cutting of Cast Iron / Cast Steel

    SEC-DNH 12000 Model for High Efficiency Cutting of Cast Iron / Cast Steel

    SUMITOMO ELECTRIC HARDMETAL

    Achieves high efficiency machining with a maximum cutting ability of 8 mm. For high efficiency machining of cast iron, cast steel

    ab
    357.52€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • for SEC-DNX Model DNXF-R

    for SEC-DNX Model DNXF-R

    SUMITOMO ELECTRIC HARDMETAL

    Achieves high efficiency machining with a maximum cutting ability of 8 mm. For High Efficiency Machining of Cast Iron and Steel

    ab
    417.52€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

  • Processing Applications

  • Flute Diameter D(φ)

    • 6
    • 7
    • 8
    • 10
    • 10 mm
    • 11.68 mm
    • 12
    • 12 mm
    • 13.2
    • 13.4
    • 14
    • 15
    • 15 mm
    • 15.4
    • 16
    • 16 mm
    • 16.2
    • 17
    • 18
    • 18 mm
    • 18.2
    • 18.4
    • 18.9
    • 20
    • 20 mm
    • 20.2
    • 21
    • 22
    • 22 mm
    • 23.2
    • 23.4
    • 23.8
    • 24
    • 24 mm
    • 25
    • 25 mm
    • 26
    • 28
    • 28 mm
    • 28.2
    • 30
    • 30 mm
    • 30.7
    • 32
    • 32 mm
    • 32.5 mm
    • 33
    • 33.4
    • 34
    • 35
    • 35 mm
    • 36
    • 36.47 mm
    • 37
    • 38
    • 38.2
    • 39
    • 40
    • 40 mm
    • 40(42.9)
    • 40.7
    • 42
    • 42 mm
    • 43
    • 44
    • 44 mm
    • 46.4
    • 47
    • 48.7
    • 50
    • 50 (52.9)
    • 50 mm
    • 51
    • 51.2
    • 52
    • 52 mm
    • 53.7
    • 54 mm
    • 54.08 mm
    • 55
    • 56.7 mm
    • 60
    • 61.7
    • 62.5 mm
    • 63
    • 63 (65.9)
    • 63 mm
    • 63.4
    • 64
    • 64.08 mm
    • 65
    • 66
    • 66 mm
    • 68
    • 69.7 mm
    • 70
    • 72
    • 75
    • 75.5 mm
    • 77.08 mm
    • 78.08 mm
    • 78.7
    • 80
    • 80 (82.9)
    • 80 mm
    • 83.4
    • 84
    • 84 mm
    • 86.7 mm
    • 88
    • 90
    • 92 mm
    • 92.5mm
    • 94.08 mm
    • 98.7
    • 98.8 mm
    • 100
    • 100 (102.9)
    • 100 mm
    • 101.3 mm
    • 105
    • 106.7 mm
    • 110
    • 112 mm
    • 112.5 mm
    • 114.08 mm
    • 118.8 mm
    • 123.7
    • 125
    • 125 (127.9)
    • 125 mm
    • 130
    • 131.4 mm
    • 131.7 mm
    • 137.5 mm
    • 138.8 mm
    • 139.08 mm
    • 140
    • 143.8 mm
    • 145.2 mm
    • 150
    • 157
    • 160
    • 160 (162.9)
    • 160 mm
    • 166.4 mm
    • 166.7 mm
    • 172.5 mm
    • 174.08 mm
    • 178.8 mm
    • 180
    • 180.2 mm
    • 200
    • 200 (202.9)
    • 200 mm
    • 205.6 mm
    • 212.5 mm
    • 214.08 mm
    • 218.8 mm
    • 220.2 mm
    • 250
    • 250 (252.9)
    • 250 mm
    • 255.6 mm
    • 262.5 mm
    • 264.08 mm
    • 268.8 mm
    • 315
  • Work Material

  • Mounting Method

  • Finish Classification

  • Overall Length (L)(mm)

    • 26~27
      • 26
      • 27
    • 32~38
      • 32
      • 33
      • 35
      • 38
    • 40~49
      • 40
      • 42
      • 43
      • 45
      • 49
    • 50~57
      • 50
      • 53
      • 54
      • 55
      • 56
      • 57
    • 60~68
      • 60
      • 63
      • 68
    • 70~78
      • 70
      • 73
      • 74
      • 75
      • 76
      • 77.7
      • 78
    • 80~88
      • 80
      • 81
      • 82
      • 83
      • 84
      • 84.7
      • 85
      • 88
    • 90~98.7
      • 90
      • 91
      • 92
      • 93
      • 95
      • 98
      • 98.7
    • 100~109
      • 100
      • 104
      • 105
      • 107
      • 108
      • 109
    • 110~117
      • 110
      • 111
      • 112
      • 115
      • 117
    • 120~128
      • 120
      • 121
      • 123
      • 123.5
      • 124
      • 125
      • 125.2
      • 126
      • 127
      • 128
    • 130~137
      • 130
      • 131
      • 132
      • 133
      • 134
      • 134.6
      • 135
      • 136
      • 137
    • 140~147.5
      • 140
      • 141
      • 144
      • 145
      • 145.2
      • 147
      • 147.5
    • 150~156
      • 150
      • 155
      • 156
    • 160~166
      • 160
      • 161
      • 165
      • 166
    • 170~176
      • 170
      • 171
      • 173
      • 175
      • 176
    • 180~186
      • 180
      • 184.6
      • 185
      • 186
    • 190~191
      • 190
      • 191
    • 200~207
      • 200
      • 203.8
      • 207
    • 210~217
      • 210
      • 215
      • 217
    • 220~228
      • 220
      • 221
      • 223.8
      • 224
      • 228
    • 230~232
      • 230
      • 232
    • 240~249.5
      • 240
      • 243.8
      • 245
      • 247
      • 248
      • 249.5
    • 250~258
      • 250
      • 256
      • 257
      • 258
    • 260~268
      • 260
      • 262
      • 268
    • 270~278
      • 270
      • 275
      • 278
    • 280~284
      • 280
      • 284
    • 290~299.5
      • 290
      • 299.5
    • 300~306
      • 300
      • 306
    • 329
    • 350
  • Link Diameter (d)(mm)

    • MT5
    • MT5-M16
    • MT5-M24
    • 6
    • 8
    • 8.5
    • 10
    • 10.5
    • 12
    • 12.5
    • 15
    • 16
    • 17
    • 18
    • 20
    • 22
    • 23
    • 25
    • 25.4
    • 27
    • 28
    • 31.75
    • 31.8
    • 32
    • 35
    • 38.1
    • 40
    • 42
    • 44
    • 47.6
    • 47.62
    • 47.625
    • 50
    • 50.8
    • CN50.8
    • 55
    • 60
    • 180
    • 210
  • Number of Flutes(Pieces)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 8/2
    • 9
    • 10
    • 11
    • 12
    • 14
    • 15
    • 16
    • 16/4
    • 18
    • 20
    • 22
    • 24
    • 26
    • 28
    • 32
    • 36
  • Supported Tip Material Type

  • Max. Cutting Depth (Ad)(mm)

    • 0.1 ~ 0.4
    • 0.5
    • 0.7
    • 1
    • 1.2
    • 1.5
    • 2
    • 2.4
    • 2.5
    • 3
    • 3 (SumiDia Tip is Used), 10 (Carbide Tip is Used)
    • 4
    • 5
    • 5.5
    • 5.7
    • 5.8
    • 6
    • 6 (SNMT / SNET Tip) / 3 (ONMT / ONE Tip)
    • 6.5
    • 7
    • 7.5
    • 7.9/8.08
    • 8
    • 8 ~ 19
    • 8.9
    • 9
    • 9 ~ 22
    • 9.5
    • 9.6/9.99
    • 10
    • 10.7
    • 10.8
    • 11
    • 13
    • 14
    • 14.4
    • 14.5
    • 15
    • 15.4
    • 15.7
    • 16
    • 16 ~ 18
    • 17
    • 17 ~ 35
    • 17.9
    • 18
    • 18 ~ 36
    • 19
    • 20
    • 20 ~ 47
    • 22
    • 22.3
    • 23
    • 24
    • 26.9
    • 27
    • 28.6
    • 29.5
    • 30
    • 30 ~ 69
    • 35
    • 36
    • 36.5
    • 39
    • 41
    • 44
    • 44.6
    • 53
    • 57
  • Length Under Neck (ℓ1)(mm)

    • 4
    • 9
    • 10
    • 11
    • 15
    • 16
    • 17
    • 18
    • 19
    • 20
    • 22
    • 23
    • 24
    • 25
    • 25.7
    • 26
    • 27
    • 28
    • 30
    • 32
    • 32.7
    • 33
    • 34
    • 35
    • 36
    • 37.8
    • 38
    • 39
    • 40
    • 40.7
    • 43
    • 45
    • 50
    • 53
    • 54
    • 55
    • 56
    • 60
    • 62.5
    • 63
    • 64
    • 65
    • 69
    • 70
    • 72
    • 73
    • 75
    • 80
    • 82
    • 84
    • 85
    • 88
    • 90
    • 95
    • 96
    • 100
    • 105
    • 106
    • 110
    • 115
    • 120
    • 124
    • 125
    • 130
    • 135
    • 137.5
    • 140
    • 145
    • 150
    • 160
    • 165
    • 170
    • 176
    • 180
    • 184
    • 190
    • 200
    • 220
    • 250
    • 270

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen