• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Bohrspitzen

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • 17 Tage oder weniger
  • 22 Tage oder weniger
    • Empfehlung
    Square Bit (Metric)

    Square Bit (Metric)

    SANWA SEISAKUSYO

    [Characteristics] Compared with conventional high-speed steel, this product uses a material with superior high-temperature hardness and wear-resistance. Shows its superiority when used for highly difficult cutting. This product conforms to JIS standards.

    ab
    16.13€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • High Speed Bits S700 Round Type Slot Bits

    High Speed Bits S700 Round Type Slot Bits

    SANWA SEISAKUSYO

    Brazing bytes Hythe

    • Mengenrabatt
    ab
    53.71€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Complete Bit

    Complete Bit

    TOYOBITES

    Flat Form Tool Holder

    • Mengenrabatt
    ab
    11.15€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Assab 17, Perfect Tool Bit, Square Bit (In Millimeters)

    Assab 17, Perfect Tool Bit, Square Bit (In Millimeters)

    ASSAB

    High-quality complete byte from Sweden characterized by excellent machinability and high hardness.

    ab
    15.18€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • JIS Compliant Single Edged Tool Models 33, 34

    JIS Compliant Single Edged Tool Models 33, 34

    HICUT

    JIS Compliant Single Edged Tool Models 33, 34

    • Mengenrabatt
    ab
    10.03€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Bit JIS33 Type Right Hand

    Carbide Bit JIS33 Type Right Hand

    SANWA SEISAKUSYO

    [Characteristics] This product conforms to JIS standards.

    ab
    12.84€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Trapezoidal Parting Tool

    Trapezoidal Parting Tool

    SANWA SEISAKUSYO

    [Characteristics] This product conforms to JIS standards.

    ab
    22.34€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • JIS Standard Series Boring Bit 11 Model (Former JIS Series)

    JIS Standard Series Boring Bit 11 Model (Former JIS Series)

    HICUT

    JIS Compliant Corner Tool Models 11 / 38

    • Mengenrabatt
    ab
    12.21€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • JIS Standard Series Parting Bit 21 Model (Former JIS Series)

    JIS Standard Series Parting Bit 21 Model (Former JIS Series)

    HICUT

    JIS Compliant Corner Tool Models 21 / 38

    • Mengenrabatt
    ab
    11.52€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Assab 17, Perfect Tool Bit, Flat Bit (in Millimeters)

    Assab 17, Perfect Tool Bit, Flat Bit (in Millimeters)

    ASSAB

    High-quality complete byte from Sweden characterized by excellent machinability and high hardness.

    ab
    25.37€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • JIS Standard Series Parting Bit 21 Model

    JIS Standard Series Parting Bit 21 Model

    HICUT

    JIS Standard Series Parting Bit 21 Model

    ab
    11.12€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Knurling Holders

    Knurling Holders

    NEW STRONG

    You can use it as a right hand by replacing the cartridge up and down

    ab
    80.53€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Bit JIS40 Type Left Hand

    Carbide Bit JIS40 Type Left Hand

    SANWA SEISAKUSYO

    [Characteristics] This product conforms to JIS standards.

    ab
    13.22€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Assab 17, Perfect Tool Bit, Square Bit (in Inches)

    Assab 17, Perfect Tool Bit, Square Bit (in Inches)

    ASSAB

    High-quality complete byte from Sweden characterized by excellent machinability and high hardness.

    ab
    15.41€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Stick Tool Holder (Tools Sold Separately)

    Stick Tool Holder (Tools Sold Separately)

    NEW STRONG

    Heru type softens shocks in meeting the bite for a comfortable operation.

    • Mengenrabatt
    ab
    69.97€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Boring Bevel Tool Bits

    Boring Bevel Tool Bits

    NEW STRONG

    For Boring

    • Mengenrabatt
    ab
    40.01€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • JIS Compliant Corner Tool Models 39 / 35

    JIS Compliant Corner Tool Models 39 / 35

    HICUT

    JIS Compliant Corner Tool Models 39 / 35

    ab
    10.78€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Trapezoidal Parting Tool

    Trapezoidal Parting Tool

    NEW STRONG

    Optimized For Cut-off Machining

    ab
    47.21€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Standard-Sized Square Bits

    Standard-Sized Square Bits

    NEW STRONG

    Finishing Bite for Lathing

    • Mengenrabatt
    ab
    28.23€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Square Bit (Inch)

    Square Bit (Inch)

    SANWA SEISAKUSYO

    [Characteristics] Compared with conventional high-speed steel, this product uses a material with superior high-temperature hardness and wear-resistance. Shows its superiority when used for highly difficult cutting. This product conforms to JIS standards.

    ab
    24.57€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • JIS Compliant Corner Tool Models 41 / 42

    JIS Compliant Corner Tool Models 41 / 42

    HICUT

    JIS Compliant Corner Tool Models 41 / 42

    • Mengenrabatt
    ab
    11.01€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Jig Borer Bit IJB Type

    Jig Borer Bit IJB Type

    SUMITOMO ELECTRIC HARDMETAL

    Model suffix of "C" indicates corner grinding model.

    ab
    63.76€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Assab 17, Perfect Tool Bit, φ Bit (in Millimeters)

    Assab 17, Perfect Tool Bit, φ Bit (in Millimeters)

    ASSAB

    High-quality complete byte from Sweden characterized by excellent machinability and high hardness.

    ab
    20.10€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • High Speed Bits JIS10 Type S501 Type Straight Blade

    High Speed Bits JIS10 Type S501 Type Straight Blade

    SANWA SEISAKUSYO

    [Characteristics] Compared with conventional high-speed steel, this product uses a material with superior high-temperature hardness and wear-resistance.

    ab
    26.02€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • JIS Standard Series Flat Bit 20 Model (Former JIS Series)

    JIS Standard Series Flat Bit 20 Model (Former JIS Series)

    HICUT

    JIS Compliant Flat Tool Model 20 (Old JIS Model)

    ab
    10.43€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • JIS Compliant Corner Tool Models 31 / 32

    JIS Compliant Corner Tool Models 31 / 32

    HICUT

    JIS Compliant Corner Tool Models 31 / 32

    ab
    11.01€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Trapezoidal Parting Tool

    Trapezoidal Parting Tool

    TOYOBITES

    Material SKH57

    • Mengenrabatt
    ab
    21.38€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • JIS Type Stick Bit

    JIS Type Stick Bit

    ASSAB

    A High Grade Solid Tool Bit from Sweden with Terrific High Hardness and Cutting Ability!

    • Mengenrabatt
    ab
    56.15€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Plain (Material) Bits

    Plain (Material) Bits

    TOYOBITES

    Material SKH57

    • Mengenrabatt
    ab
    21.77€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • JIS Standard Series Inner Thread Cutting Bit 15 Model (Former JIS Series)

    JIS Standard Series Inner Thread Cutting Bit 15 Model (Former JIS Series)

    HICUT

    JIS Compliant Corner Tool Models 15 / 38

    ab
    11.86€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • JIS Series Carbide Bit

    JIS Series Carbide Bit

    SUMITOMO ELECTRIC HARDMETAL

    JIS compliant tool.

    ab
    13.13€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • High Speed Bits JIS32 Type S513 Type Spring-Necked Cutting

    High Speed Bits JIS32 Type S513 Type Spring-Necked Cutting

    SANWA SEISAKUSYO

    [Characteristics] Compared with conventional high-speed steel, this product uses a material with superior high-temperature hardness and wear-resistance.

    • Mengenrabatt
    ab
    35.79€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Bit JIS36 Type Round Blade

    Carbide Bit JIS36 Type Round Blade

    SANWA SEISAKUSYO

    [Characteristics] This product conforms to JIS standards.

    ab
    12.32€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • High Speed Bits JIS51 Type S509 Type Threading

    High Speed Bits JIS51 Type S509 Type Threading

    SANWA SEISAKUSYO

    [Characteristics] Compared with conventional high-speed steel, this product uses a material with superior high-temperature hardness and wear-resistance.

    ab
    25.38€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • High Speed Bits JIS22 Type S511 Type Spring-Necked Finish

    High Speed Bits JIS22 Type S511 Type Spring-Necked Finish

    SANWA SEISAKUSYO

    [Characteristics] Compared with conventional high-speed steel, this product uses a material with superior high-temperature hardness and wear-resistance.

    • Mengenrabatt
    ab
    34.07€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • High Speed Bits JIS11 Type S502 Type Round Blade

    High Speed Bits JIS11 Type S502 Type Round Blade

    SANWA SEISAKUSYO

    [Characteristics] Compared with conventional high-speed steel, this product uses a material with superior high-temperature hardness and wear-resistance.

    • Mengenrabatt
    ab
    23.54€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Bit JIS35 Type Real

    Carbide Bit JIS35 Type Real

    SANWA SEISAKUSYO

    [Characteristics] This product conforms to JIS standards.

    ab
    12.32€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • High Speed Bits S700 Square Type Slot Bits

    High Speed Bits S700 Square Type Slot Bits

    SANWA SEISAKUSYO

    Brazing bytes Hythe

    ab
    53.71€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • JIS Compliant Corner Tool Models 39 / 36

    JIS Compliant Corner Tool Models 39 / 36

    HICUT

    JIS Compliant Corner Tool Models 39 / 36

    ab
    10.32€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Precision Automatic Lathe Tool Holder L Type

    Precision Automatic Lathe Tool Holder L Type

    HICUT

    Precision Automatic Lathe Tool Holder L Type

    • Mengenrabatt
    ab
    14.74€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • JIS Standard Series Outer Thread Cutting Bit 13 Model (Former JIS Series)

    JIS Standard Series Outer Thread Cutting Bit 13 Model (Former JIS Series)

    HICUT

    JIS Compliant Corner Tool Models 13 / 38

    • Mengenrabatt
    ab
    11.86€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Flat Type Bite for Bench Lathe

    Flat Type Bite for Bench Lathe

    HICUT

    Flat Type Bite for Bench Lathe

    • Mengenrabatt
    ab
    12.81€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Sumiboron Jigs, Boring Bits SJB Type

    Sumiboron Jigs, Boring Bits SJB Type

    SUMITOMO ELECTRIC HARDMETAL

    Recommended Cutting Conditions: Spindle Rotation Speed 800MIN-1 or Above, AP: 0.03 to 0.3 mm / radius, Feed Rate F: 0.03 to 0.1 mm / REV

    ab
    197.02€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Automatic Lathe Bit

    Automatic Lathe Bit

    TOYOBITES

    Carbide bytes

    • Mengenrabatt
    ab
    12.78€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • Precision Automatic Lathe Tool Holder Flat Type

    Precision Automatic Lathe Tool Holder Flat Type

    HICUT

    Precision Automatic Lathe Tool Holder Flat Type

    • Mengenrabatt
    ab
    14.23€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

  • JIS Standard

    • Shape 10 point nose straight tool
    • Type 11 Boring Tool (Right)
    • Type 11 Similar product
    • Type 11 Straight Turning Tool with Rounded Corner
    • 13L Type Left Single-edged Bit
    • 13R Type Right Single-edged Bit
    • Type 13 Outer Thread Cutting Bit (Right)
    • 14L Type Left Rough Blade Bit
    • 14R Type Right Rough Blade Bit
    • 15L Type Left Horizontal Finishing Tool Bit
    • 15R Type Right Horizontal Finishing Tool Bit
    • Type 15 Inner Thread Cutting Bit (Right)
    • 20 Type Flat Bit
    • 21 Type Projecting Bit (Right)
    • 22 Type Hale Finishing Tool
    • 31 Type (Right-Handed)
    • 31 Type Asymmetric Cutting Edge Bit (Right)
    • 31 Type Projecting Bit
    • 32 Type (Left Handed)
    • 32 Type Asymmetric Cutting Edge Bit (Left)
    • 32 Type Hale Projecting Bit
    • 33 Type (Right-Handed)
    • 33 Type Single Cutting Edge Bit (Right)
    • 34 Type (Left Handed)
    • 34 Type Single Cutting Edge Bit (Left)
    • 35 Type
    • 35 Type Straight Cutting Edge Bit
    • 36 Type
    • 36 Type Round Tip Cutting Edge Bit
    • 37 Type (Right-Handed)
    • 37 Type Corner Bit (Right)
    • 38 Type (Left Handed)
    • 38 Type Corner Bit (Left)
    • 39 Type (Right-Handed)
    • 39 Type Round Tip Corner Bit (Right)
    • 40 type (Left-hand)
    • Type 40 Round tip hole tool
    • Type 40 Round tip tool (Left)
    • Type 41 (Right-hand)
    • Type 41 hole tool
    • Type 41 twin tool (Right)
    • 42 type (Left-hand)
    • Type 42 hole finish tool
    • Type 42 twin tool (Left)
    • 43 Type
    • Type 43 punching tool (Right)
    • Type 45 (Right-hand)
    • Type 47 (Right-hand)
    • Type 49 (Right-hand)
    • Type 51 (Right-hand)
    • Type 51 outer threading tool
    • Type 52 threading tool
    • Type 53 Hale threading tool
    • 60 Type Real Byte
    • 64 Type Square Nose Straight Tool
    • 95 Type
    • Box Tool Bits for Turret
    • Flat Bit for Bench Lathe
    • Precise Automatic Lathe Tool - Conventional Type
    • Precise Automatic Lathe Tool - External Cutting Type
    • Precise Automatic Lathe Tool - Flat Type
    • Precise Automatic Lathe Tool - L Type
    • Precise Automatic Lathe Tool - Plunging Type
    • Square bit (inch)
    • Square bit (millimeter)
    • Sticking Tool
  • Product Type

  • Width(mm)

    • 1
    • 1/2
    • 1/4
    • 1/8
    • 1.5
    • 2
    • 2.4
    • 2.5
    • 3
    • 3/16
    • 3/4
    • 3/8
    • 3.17
    • 3.2
    • 3.5
    • 4
    • 4.5
    • 4.76
    • 4.8
    • 5
    • 5/16
    • 5/8
    • 5.5
    • 6
    • 6.35
    • 6.4
    • 6.5
    • 7
    • 7/16
    • 7/8
    • 7.5
    • 7.93
    • 8
    • 8.5
    • 9
    • 9.5
    • 9.52
    • 9.53
    • 10
    • 10.5
    • 12
    • 12.7
    • 13
    • 14
    • 15
    • 15.87
    • 15.9
    • 16
    • 17
    • 18
    • 19
    • 19.05
    • 20
    • 22
    • 24
    • 25
    • 25.4
    • 28
    • 32
    • 34
    • 38
  • Material

    • H1
    • H2
    • MF2
    • FXR20
    • STI20
    • UTI20
    • NXR30
    • A40
    • SKH57
    • HT103
    • HT105
    • HT110
    • ST110
    • UT110
    • HT120
    • ST120
    • UT120
    • ST130
    • UT140
    • BN250
    • Carbide
    • Cobalt HSS
    • High-speed steel
  • Overall Length(mm)

    • 2-1/2
    • 3
    • 4
    • 5
    • 6
    • 8
    • 15
    • 21/2
    • 25
    • 32
    • 33
    • 38
    • 45
    • 50
    • 60
    • 63
    • 65
    • 70
    • 75
    • 76
    • 80
    • 90
    • 100
    • 101
    • 110
    • 115
    • 120
    • 125
    • 127
    • 135
    • 140
    • 145
    • 150
    • 152
    • 160
    • 165
    • 175
    • 180
    • 190
    • 195
    • 200
    • 203
    • 210
    • 220
    • 230
    • 240
    • 250
    • 255
    • 260
    • 270
    • 280
    • 290
    • 300
    • 320
    • 330
    • 380
  • Height(mm)

    • 1
    • 1/2
    • 1/4
    • 1/8
    • 1.5
    • 2
    • 2.5
    • 3
    • 3/16
    • 3/4
    • 3/8
    • 3.5
    • 4
    • 4.5
    • 4.76
    • 5
    • 5/16
    • 5/8
    • 5.5
    • 6
    • 6.35
    • 6.4
    • 6.5
    • 7
    • 7/16
    • 7/8
    • 7.5
    • 7.93
    • 8
    • 8.5
    • 9
    • 9.5
    • 9.52
    • 9.53
    • 10
    • 10.5
    • 12
    • 12.7
    • 13
    • 14
    • 15
    • 15.87
    • 15.9
    • 16
    • 18
    • 19
    • 19.05
    • 20
    • 22
    • 24
    • 25
    • 25.4
    • 28
    • 30
    • 32
    • 38
    • 65
  • Compatible Bit

    • Ru -4
    • To -4
    • Ru -3
    • To -3
    • Ru -2
    • To -2
    • Ru -1
    • To -1
    • 01-0
    • 01-1
    • 01-2
    • 01-3
    • 01-4
    • Parting tool with trapezoidal section NO. 1 (3.2 x 1/2 x 90)
    • Round Completed Cutting Bit 1x100
    • Round Completed Cutting Bit 1x50
    • Square Completed Cutting Bit 1/2x1/2x4
    • Square Completed Cutting Bit 1/2x1/2x6
    • Square Completed Cutting Bit 1/2x1/2x8
    • Square Completed Cutting Bit 1/4x1/4x21/2
    • Square Completed Cutting Bit 1/4x1/4x4
    • Square Completed Cutting Bit 1/4x1/4x6
    • Square Completed Cutting Bit 1/8x1/8x21/2
    • Square Completed Cutting Bit 1x1x8
    • Square Material Cutter Bit (Plain Cutter Bit) 1/2x1/2x300
    • Square Material Cutter Bit (Plain Cutter Bit) 1/4x1/4x300
    • Square Material Cutter Bit (Plain Cutter Bit) 1x1x300
    • Round Completed Cutting Bit 1.5x100
    • Round Completed Cutting Bit 1.5x65
    • 02-0
    • 02-1
    • 02-2
    • 02-3
    • 02-4
    • Flat finishing bit 2x10x200
    • Flat finishing bit 2x12x115
    • Flat finishing bit 2x12x200
    • Flat finishing bit 2x13x200
    • Flat finishing bit 2x16x200
    • Flat finishing bit 2x19x150
    • Flat finishing bit 2x19x200
    • Flat finishing bit 2x6x200
    • Flat finishing bit 2x6x65
    • Flat finishing bit 2x8x200
    • Parting tool with trapezoidal section NO. 2 (3.2 x 16 x 115)
    • Parting tool with trapezoidal section NO. 2 (4 x 16 x 115)
    • Parting tool with trapezoidal section NO. 2 (4 x 16 x 200)
    • Round Completed Cutting Bit 2x65
    • Round Completed Cutting Bit 2.5x100
    • Round Completed Cutting Bit 2.5x65
    • 03-0
    • 03-1
    • 03-2
    • 03-3
    • 03-4
    • Flat finishing bit 3x10x100
    • Flat finishing bit 3x10x150
    • Flat finishing bit 3x10x200
    • Flat finishing bit 3x13x150
    • Flat finishing bit 3x13x200
    • Flat finishing bit 3x16x150
    • Flat finishing bit 3x16x200
    • Flat finishing bit 3x18x200
    • Flat finishing bit 3x19x150
    • Flat finishing bit 3x19x200
    • Flat finishing bit 3x25x200
    • Flat finishing bit 3x32x200
    • Flat finishing bit 3x5x65
    • Flat finishing bit 3x6x100
    • Flat finishing bit 3x6x150
    • Flat finishing bit 3x6x200
    • Flat finishing bit 3x6x65
    • Flat finishing bit 3x8x100
    • Flat finishing bit 3x8x150
    • Flat finishing bit 3x8x200
    • Flat finishing bit 3x8x75
    • Flat plain bit (plain bit) 3x13x300
    • Flat plain bit (plain bit) 3x16x300
    • Flat plain bit (plain bit) 3x19x300
    • Flat plain bit (plain bit) 3x25x300
    • Flat plain bit (plain bit) 3x32x300
    • Parting tool with trapezoidal section NO. 3 (4.8 x 19 x 140)
    • Round Completed Cutting Bit 3x100
    • Round Completed Cutting Bit 3x65
    • Square Completed Cutting Bit 3/16x3/16x2-1/2
    • Square Completed Cutting Bit 3/16x3/16x4
    • Square Completed Cutting Bit 3/16x3/16x6
    • Square Completed Cutting Bit 3/4x3/4x6
    • Square Completed Cutting Bit 3/4x3/4x8
    • Square Completed Cutting Bit 3/8x3/8x3
    • Square Completed Cutting Bit 3/8x3/8x4
    • Square Completed Cutting Bit 3/8x3/8x6
    • Square Completed Cutting Bit 3x3x65
    • Square Material Cutter Bit (Plain Cutter Bit) 3/4x3/4x300
    • Square Material Cutter Bit (Plain Cutter Bit) 3/8x3/8x300
    • Round Completed Cutting Bit 3.5x100
    • Round Completed Cutting Bit 3.5x65
    • 04-0
    • 04-1
    • 04-2
    • 04-3
    • 04-4
    • Flat finishing bit 4x10x150
    • Flat finishing bit 4x10x200
    • Flat finishing bit 4x13x150
    • Flat finishing bit 4x13x200
    • Flat finishing bit 4x16x150
    • Flat finishing bit 4x16x200
    • Flat finishing bit 4x19x150
    • Flat finishing bit 4x19x200
    • Flat finishing bit 4x25x200
    • Flat finishing bit 4x32x200
    • Flat finishing bit 4x8x100
    • Flat finishing bit 4x8x150
    • Parting tool with trapezoidal section NO. 4 (6 x 25 x 165)
    • Round Completed Cutting Bit 4x100
    • Round Completed Cutting Bit 4x65
    • Square Completed Cutting Bit 4x4x100
    • Square Completed Cutting Bit 4x4x65
    • Round Completed Cutting Bit 4.5x100
    • Round Completed Cutting Bit 4.5x65
    • 05-1
    • 05-2
    • 05-3
    • 05-4
    • Flat finishing bit 5x10x150
    • Flat finishing bit 5x10x200
    • Flat finishing bit 5x13x150
    • Flat finishing bit 5x13x200
    • Flat finishing bit 5x16x150
    • Flat finishing bit 5x16x200
    • Flat finishing bit 5x19x150
    • Flat finishing bit 5x19x200
    • Flat finishing bit 5x25x200
    • Flat finishing bit 5x32x200
    • Flat finishing bit 5x8x150
    • Flat plain bit (plain bit) 5x13x300
    • Flat plain bit (plain bit) 5x16x300
    • Flat plain bit (plain bit) 5x19x300
    • Flat plain bit (plain bit) 5x25x300
    • Flat plain bit (plain bit) 5x32x300
    • Round Completed Cutting Bit 5x100
    • Round Completed Cutting Bit 5x65
    • Square Completed Cutting Bit 5/16x5/16x2-1/2
    • Square Completed Cutting Bit 5/16x5/16x4
    • Square Completed Cutting Bit 5/16x5/16x6
    • Square Completed Cutting Bit 5/8x5/8x5
    • Square Completed Cutting Bit 5/8x5/8x6
    • Square Completed Cutting Bit 5/8x5/8x8
    • Square Completed Cutting Bit 5x5x100
    • Square Completed Cutting Bit 5x5x150
    • Square Completed Cutting Bit 5x5x65
    • Square Material Cutter Bit (Plain Cutter Bit) 5/16x5/16x300
    • Square Material Cutter Bit (Plain Cutter Bit) 5/8x5/8x300
    • Round Completed Cutting Bit 5.5x100
    • Round Completed Cutting Bit 5.5x65
    • 06-0
    • 06-1
    • 06-2
    • 06-3
    • 06-4
    • Automatic Lathe Bit Finishing 6x150-H1
    • Automatic Lathe Bit Finishing 6x150-H2
    • Automatic Lathe Bit Finishing 6x150-MF2
    • Automatic Lathe Bit Finishing 6x150-STi20
    • Automatic Lathe Bit Finishing 6x150-UTi20
    • Automatic Lathe Bit Left Plunging 6x150-H1
    • Automatic Lathe Bit Left Plunging 6x150-H2
    • Automatic Lathe Bit Left Plunging 6x150-MF2
    • Automatic Lathe Bit Left Plunging 6x150-STi20
    • Automatic Lathe Bit Left Plunging 6x150-UTi20
    • Automatic Lathe Bit Left Single Flute 6x150-H1
    • Automatic Lathe Bit Left Single Flute 6x150-H2
    • Automatic Lathe Bit Left Single Flute 6x150-MF2
    • Automatic Lathe Bit Left Single Flute 6x150-STi20
    • Automatic Lathe Bit Left Single Flute 6x150-UTi20
    • Automatic Lathe Bit Right Plunging 6x150-H1
    • Automatic Lathe Bit Right Plunging 6x150-H2
    • Automatic Lathe Bit Right Plunging 6x150-MF2
    • Automatic Lathe Bit Right Plunging 6x150-STi20
    • Automatic Lathe Bit Right Plunging 6x150-UTi20
    • Automatic Lathe Bit Right Single Flute 6x150-H1
    • Automatic Lathe Bit Right Single Flute 6x150-H2
    • Automatic Lathe Bit Right Single Flute 6x150-MF2
    • Automatic Lathe Bit Right Single Flute 6x150-STi20
    • Automatic Lathe Bit Right Single Flute 6x150-UTi20
    • Flat finishing bit 6x10x150
    • Flat finishing bit 6x10x200
    • Flat finishing bit 6x12x150
    • Flat finishing bit 6x12x200
    • Flat finishing bit 6x13x150
    • Flat finishing bit 6x13x200
    • Flat finishing bit 6x16x150
    • Flat finishing bit 6x16x200
    • Flat finishing bit 6x19x150
    • Flat finishing bit 6x19x200
    • Flat finishing bit 6x25x200
    • Flat finishing bit 6x32x200
    • Flat finishing bit 6x8x150
    • Flat finishing bit 6x8x200
    • Flat plain bit (plain bit) 6x13x300
    • Flat plain bit (plain bit) 6x16x300
    • Flat plain bit (plain bit) 6x19x300
    • Flat plain bit (plain bit) 6x25x300
    • Flat plain bit (plain bit) 6x32x300
    • Round Completed Cutting Bit 6x100
    • Round Completed Cutting Bit 6x200
    • Round Completed Cutting Bit 6x65
    • Round Material Cutter Bit (Plain Cutter Bit) 6x300
    • Square Completed Cutting Bit 6x6x100
    • Square Completed Cutting Bit 6x6x150
    • Square Completed Cutting Bit 6x6x65
    • Round Completed Cutting Bit 6.5x100
    • Round Completed Cutting Bit 6.5x65
    • 07-0
    • 07-1
    • 07-2
    • 07-3
    • 07-4
    • Automatic Lathe Bit Finishing 7x150-H1
    • Automatic Lathe Bit Finishing 7x150-H2
    • Automatic Lathe Bit Finishing 7x150-MF2
    • Automatic Lathe Bit Finishing 7x150-STi20
    • Automatic Lathe Bit Finishing 7x150-UTi20
    • Automatic Lathe Bit Left Plunging 7x150-H1
    • Automatic Lathe Bit Left Plunging 7x150-H2
    • Automatic Lathe Bit Left Plunging 7x150-MF2
    • Automatic Lathe Bit Left Plunging 7x150-STi20
    • Automatic Lathe Bit Left Plunging 7x150-UTi20
    • Automatic Lathe Bit Left Single Flute 7x150-H1
    • Automatic Lathe Bit Left Single Flute 7x150-H2
    • Automatic Lathe Bit Left Single Flute 7x150-MF2
    • Automatic Lathe Bit Left Single Flute 7x150-STi20
    • Automatic Lathe Bit Left Single Flute 7x150-UTi20
    • Automatic Lathe Bit Right Plunging 7x150-H1
    • Automatic Lathe Bit Right Plunging 7x150-H2
    • Automatic Lathe Bit Right Plunging 7x150-MF2
    • Automatic Lathe Bit Right Plunging 7x150-STi20
    • Automatic Lathe Bit Right Plunging 7x150-UTi20
    • Automatic Lathe Bit Right Single Flute 7x150-H1
    • Automatic Lathe Bit Right Single Flute 7x150-H2
    • Automatic Lathe Bit Right Single Flute 7x150-MF2
    • Automatic Lathe Bit Right Single Flute 7x150-STi20
    • Automatic Lathe Bit Right Single Flute 7x150-UTi20
    • Round Completed Cutting Bit 7x100
    • Round Completed Cutting Bit 7x200
    • Square Completed Cutting Bit 7/16x7/16x4
    • Square Completed Cutting Bit 7/8x7/8x8
    • Square Completed Cutting Bit 7x7x100
    • Square Completed Cutting Bit 7x7x150
    • Square Completed Cutting Bit 7x7x65
    • Round Completed Cutting Bit 7.5x100
    • 08-1
    • 08-3
    • 08-4
    • Automatic Lathe Bit Finishing 8x150-H1
    • Automatic Lathe Bit Finishing 8x150-H2
    • Automatic Lathe Bit Finishing 8x150-MF2
    • Automatic Lathe Bit Finishing 8x150-STi20
    • Automatic Lathe Bit Finishing 8x150-UTi20
    • Automatic Lathe Bit Left Plunging 8x150-H1
    • Automatic Lathe Bit Left Plunging 8x150-H2
    • Automatic Lathe Bit Left Plunging 8x150-MF2
    • Automatic Lathe Bit Left Plunging 8x150-STi20
    • Automatic Lathe Bit Left Plunging 8x150-UTi20
    • Automatic Lathe Bit Left Single Flute 8x150-H1
    • Automatic Lathe Bit Left Single Flute 8x150-H2
    • Automatic Lathe Bit Left Single Flute 8x150-MF2
    • Automatic Lathe Bit Left Single Flute 8x150-STi20
    • Automatic Lathe Bit Left Single Flute 8x150-UTi20
    • Automatic Lathe Bit Right Plunging 8x15-H1
    • Automatic Lathe Bit Right Plunging 8x150-H2
    • Automatic Lathe Bit Right Plunging 8x150-MF2
    • Automatic Lathe Bit Right Plunging 8x150-STi20
    • Automatic Lathe Bit Right Plunging 8x150-UTi20
    • Automatic Lathe Bit Right Single Flute 8x150-H1
    • Automatic Lathe Bit Right Single Flute 8x150-H2
    • Automatic Lathe Bit Right Single Flute 8x150-MF2
    • Automatic Lathe Bit Right Single Flute 8x150-STi20
    • Automatic Lathe Bit Right Single Flute 8x150-UTi20
    • Flat finishing bit 8x10x150
    • Flat finishing bit 8x10x200
    • Flat finishing bit 8x12x150
    • Flat finishing bit 8x12x200
    • Flat finishing bit 8x13x150
    • Flat finishing bit 8x13x200
    • Flat finishing bit 8x16x150
    • Flat finishing bit 8x16x200
    • Flat finishing bit 8x19x150
    • Flat finishing bit 8x19x200
    • Flat finishing bit 8x25x200
    • Flat finishing bit 8x32x200
    • Flat plain bit (plain bit) 8x13x300
    • Flat plain bit (plain bit) 8x16x300
    • Flat plain bit (plain bit) 8x19x300
    • Flat plain bit (plain bit) 8x25x300
    • Flat plain bit (plain bit) 8x32x300
    • Round Completed Cutting Bit 8x100
    • Round Completed Cutting Bit 8x200
    • Round Completed Cutting Bit 8x80
    • Round Material Cutter Bit (Plain Cutter Bit) 8x300
    • Square Completed Cutting Bit 8x65
    • Square Completed Cutting Bit 8x8x100
    • Square Completed Cutting Bit 8x8x150
    • Square Completed Cutting Bit 8x8x65
    • Square Completed Cutting Bit 8x8x75
    • Square Material Cutter Bit (Plain Cutter Bit) 8x8x300
    • Round Completed Cutting Bit 8.5x100
    • Round Completed Cutting Bit 9x150
    • Round Completed Cutting Bit 9.5x100
    • Automatic Lathe Bit Finishing 10x150-H1
    • Automatic Lathe Bit Finishing 10x150-H2
    • Automatic Lathe Bit Finishing 10x150-MF2
    • Automatic Lathe Bit Finishing 10x150-STi20
    • Automatic Lathe Bit Finishing 10x150-UTi20
    • Automatic Lathe Bit Left Plunging 10x150-H1
    • Automatic Lathe Bit Left Plunging 10x150-H2
    • Automatic Lathe Bit Left Plunging 10x150-MF2
    • Automatic Lathe Bit Left Plunging 10x150-STi20
    • Automatic Lathe Bit Left Plunging 10x150-UTi20
    • Automatic Lathe Bit Left Single Flute 10x150- UTi20
    • Automatic Lathe Bit Left Single Flute 10x150-H1
    • Automatic Lathe Bit Left Single Flute 10x150-H2
    • Automatic Lathe Bit Left Single Flute 10x150-MF2
    • Automatic Lathe Bit Left Single Flute 10x150-STi20
    • Automatic Lathe Bit Right Plunging 10x15-MF2
    • Automatic Lathe Bit Right Plunging 10x150-H1
    • Automatic Lathe Bit Right Plunging 10x150-H2
    • Automatic Lathe Bit Right Plunging 10x150-STi20
    • Automatic Lathe Bit Right Plunging 10x150-UTi20
    • Automatic Lathe Bit Right Single Flute 10x150-H1
    • Automatic Lathe Bit Right Single Flute 10x150-H2
    • Automatic Lathe Bit Right Single Flute 10x150-MF2
    • Automatic Lathe Bit Right Single Flute 10x150-STi20
    • Automatic Lathe Bit Right Single Flute 10x150-UTi20
    • Flat finishing bit 10x13x150
    • Flat finishing bit 10x13x200
    • Flat finishing bit 10x16x150
    • Flat finishing bit 10x16x200
    • Flat finishing bit 10x19x150
    • Flat finishing bit 10x19x200
    • Flat finishing bit 10x25x200
    • Flat finishing bit 10x32x200
    • Flat plain bit (plain bit) 10x13x300
    • Flat plain bit (plain bit) 10x16x300
    • Flat plain bit (plain bit) 10x19x300
    • Flat plain bit (plain bit) 10x25x300
    • Flat plain bit (plain bit) 10x32x300
    • Round Completed Cutting Bit 10x100
    • Round Completed Cutting Bit 10x150
    • Round Completed Cutting Bit 10x200
    • Round Completed Cutting Bit 10x80
    • Round Material Cutter Bit (Plain Cutter Bit) 10x300
    • Square Completed Cutting Bit 10x10x100
    • Square Completed Cutting Bit 10x10x150
    • Square Completed Cutting Bit 10x10x200
    • Square Completed Cutting Bit 10x10x75
    • Square Material Cutter Bit (Plain Cutter Bit) 10x10x300
    • Round Completed Cutting Bit 10.5x100
    • Automatic Lathe Bit Finishing 12x150-H1
    • Automatic Lathe Bit Finishing 12x150-H2
    • Automatic Lathe Bit Finishing 12x150-MF2
    • Automatic Lathe Bit Finishing 12x150-STi20
    • Automatic Lathe Bit Finishing 12x150-UTi20
    • Automatic Lathe Bit Left Plunging 12x150-H1
    • Automatic Lathe Bit Left Plunging 12x150-H2
    • Automatic Lathe Bit Left Plunging 12x150-MF2
    • Automatic Lathe Bit Left Plunging 12x150-STi20
    • Automatic Lathe Bit Left Plunging 12x150-UTi20
    • Automatic Lathe Bit Left Single Flute 12x150-H1
    • Automatic Lathe Bit Left Single Flute 12x150-H2
    • Automatic Lathe Bit Left Single Flute 12x150-MF2
    • Automatic Lathe Bit Left Single Flute 12x150-STi20
    • Automatic Lathe Bit Left Single Flute 12x150-UTi20
    • Automatic Lathe Bit Right Plunging 12x150-H1
    • Automatic Lathe Bit Right Plunging 12x150-H2
    • Automatic Lathe Bit Right Plunging 12x150-MF2
    • Automatic Lathe Bit Right Plunging 12x150-STi20
    • Automatic Lathe Bit Right Plunging 12x150-UTi20
    • Automatic Lathe Bit Right Single Flute 12x150-H1
    • Automatic Lathe Bit Right Single Flute 12x150-H2
    • Automatic Lathe Bit Right Single Flute 12x150-MF2
    • Automatic Lathe Bit Right Single Flute 12x150-STi20
    • Automatic Lathe Bit Right Single Flute 12x150-UTi20
    • Round Completed Cutting Bit 12x100
    • Round Completed Cutting Bit 12x150
    • Round Completed Cutting Bit 12x200
    • Square Completed Cutting Bit 12x12x100
    • Square Completed Cutting Bit 12x12x150
    • Square Completed Cutting Bit 12x12x200
    • Flat finishing bit 13x16x150
    • Flat finishing bit 13x16x200
    • Flat finishing bit 13x19x150
    • Flat finishing bit 13x19x200
    • Flat finishing bit 13x25x200
    • Flat finishing bit 13x32x200
    • Flat plain bit (plain bit) 13x16x300
    • Flat plain bit (plain bit) 13x19x300
    • Flat plain bit (plain bit) 13x25x300
    • Flat plain bit (plain bit) 13x32x300
    • Round Completed Cutting Bit 13x200
    • Round Material Cutter Bit (Plain Cutter Bit) 13x300
    • Square Completed Cutting Bit 13x13x150
    • Square Material Cutter Bit (Plain Cutter Bit) 13x13x300
    • Round Completed Cutting Bit 14x100
    • Round Completed Cutting Bit 14x200
    • Square Completed Cutting Bit 14x14x150
    • Round Completed Cutting Bit 15x200
    • Square Completed Cutting Bit 15x15x150
    • Automatic Lathe Bit Finishing 16x200-H1
    • Automatic Lathe Bit Finishing 16x200-H2
    • Automatic Lathe Bit Finishing 16x200-MF2
    • Automatic Lathe Bit Finishing 16x200-STi20
    • Automatic Lathe Bit Finishing 16x200-UTi20
    • Automatic Lathe Bit Left Plunging 16x200-H1
    • Automatic Lathe Bit Left Plunging 16x200-H2
    • Automatic Lathe Bit Left Plunging 16x200-MF2
    • Automatic Lathe Bit Left Plunging 16x200-STi20
    • Automatic Lathe Bit Left Plunging 16x200-UTi20
    • Automatic Lathe Bit Left Single Flute 16x200-H1
    • Automatic Lathe Bit Left Single Flute 16x200-H2
    • Automatic Lathe Bit Left Single Flute 16x200-MF2
    • Automatic Lathe Bit Left Single Flute 16x200-STi20
    • Automatic Lathe Bit Left Single Flute 16x200-UTi20
    • Automatic Lathe Bit Right Plunging 16x200-H1
    • Automatic Lathe Bit Right Plunging 16x200-H2
    • Automatic Lathe Bit Right Plunging 16x200-MF2
    • Automatic Lathe Bit Right Plunging 16x200-STi20
    • Automatic Lathe Bit Right Plunging 16x200-UTi20
    • Automatic Lathe Bit Right Single Flute 16x200-H1
    • Automatic Lathe Bit Right Single Flute 16x200-H2
    • Automatic Lathe Bit Right Single Flute 16x200-MF2
    • Automatic Lathe Bit Right Single Flute 16x200-STi20
    • Automatic Lathe Bit Right Single Flute 16x200-UTi20
    • Flat finishing bit 16x19x200
    • Flat finishing bit 16x25x200
    • Flat finishing bit 16x32x200
    • Flat plain bit (plain bit) 16x25x300
    • Round Completed Cutting Bit 16x150
    • Round Completed Cutting Bit 16x200
    • Round Material Cutter Bit (Plain Cutter Bit) 16x300
    • Square Completed Cutting Bit 16x16x125
    • Square Completed Cutting Bit 16x16x150
    • Square Material Cutter Bit (Plain Cutter Bit) 16x16x300
    • Round Completed Cutting Bit 18x200
    • Square Completed Cutting Bit 18x18x150
    • Flat finishing bit 19x25x200
    • Flat finishing bit 19x32x200
    • Round Material Cutter Bit (Plain Cutter Bit) 19x300
    • Square Completed Cutting Bit 19x19x150
    • Square Completed Cutting Bit 19x19x200
    • Square Material Cutter Bit (Plain Cutter Bit) 19x19x300
    • Round Completed Cutting Bit 20x150
    • Square Completed Cutting Bit 20x20x150
    • Round Completed Cutting Bit 22x150
    • Square Completed Cutting Bit 22x22x200
    • Flat finishing bit 25x32x200
    • Round Completed Cutting Bit 25x150
    • Round Completed Cutting Bit 25x200
    • Round Material Cutter Bit (Plain Cutter Bit) 25x300
    • Square Completed Cutting Bit 25x25x200
    • Square Material Cutter Bit (Plain Cutter Bit) 25x25x300

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen