• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Punktgewindebohrer

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • Point Tap Series, for General, EX-POT

    Point Tap Series, for General, EX-POT

    OSG

    Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference

    • Mengenrabatt
    ab
    7.45€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • A Tap Series for Pipes Point Tap A-POT

    A Tap Series for Pipes Point Tap A-POT

    OSG

    Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

    • Mengenrabatt
    ab
    16.16€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Trapezoid Screw Machine Tap

    Trapezoid Screw Machine Tap

    SKC

    Thread Angle TM30°, Thread Angle TW29°

    ab
    90.67€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap PO (N - PO)

    Point Tap PO (N - PO)

    YAMAWA MFG

    * N-PO will be replaced with PO as soon as there is no more in stock.

    • Mengenrabatt
    ab
    7.02€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, for Stainless Steel, EX-SUS-POT

    Point Tap Series, for Stainless Steel, EX-SUS-POT

    OSG

    Shows the great sharpness and durability when used in through holes of machinability bad stainless steel

    • Mengenrabatt
    ab
    8.65€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TiN Coated High-Speed Steel Point Tap

    TiN Coated High-Speed Steel Point Tap [1-5 Stk. pro Packung]

    MISUMI

    Limited special price is available for the standard sizes

    • Mengenrabatt
    ab
    9.09€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • High-Speed Steel Point Tap

    High-Speed Steel Point Tap [10 Stk. pro Packung]

    MISUMI

    Limited special price is available for the standard sizes

    • Mengenrabatt
    ab
    35.27€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap for Stainless Steel SU + PO / SU - PO

    Point Tap for Stainless Steel SU + PO / SU - PO

    YAMAWA MFG

    Work hardening suited for hole drilling of significantly gummy materials, from stainless steel and chrome steel to molybdenum steel.

    • Mengenrabatt
    ab
    6.99€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • MT Series High-Speed Steel Point Tap

    MT Series High-Speed Steel Point Tap

    MISUMI

    [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping. [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

    • Mengenrabatt
    ab
    4.90€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Long Shank Point Taps, LS - PO (LS - N - PO)

    Long Shank Point Taps, LS - PO (LS - N - PO)

    YAMAWA MFG

    * LS-N-PO will be replaced with LS-PO as soon as there is no more in stock.

    • Mengenrabatt
    ab
    12.15€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Stainless Steel Machining Tap, Point Tap / Spiral Tap

    Stainless Steel Machining Tap, Point Tap / Spiral Tap

    MISUMI

    in order to allow the small diameter tapping of stainless steel that's most prone to breakage, it is given the special surface treatment.

    • Mengenrabatt
    ab
    46.55€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Super Hard Taps for Super High Hardness Steel, UH-CT

    Super Hard Taps for Super High Hardness Steel, UH-CT

    YAMAWA MFG

    SKD Material "Pre-hardened" Best suited for Tapping of 55 to 60 HRC (MAX; 63HRC) Screw Processing Length is 1.5D, with a chamfer length of 5 pitches in order to give a greater lifespan. Female screws with a maximum internal diameter of 6H are recommended for pilot holes.

    • Mengenrabatt
    ab
    76.18€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, General Long Shank, EX-LT-POT

    Point Tap Series, General Long Shank, EX-LT-POT

    OSG

    Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

    • Mengenrabatt
    ab
    14.02€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Plus Series Point Tap, + PO (N + PO)

    Plus Series Point Tap, + PO (N + PO)

    YAMAWA MFG

    * N+SP will be replaced with +SP as soon as there is no more in stock.

    • Mengenrabatt
    ab
    7.16€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, Tin Coated, TIN-POT

    Point Tap Series, Tin Coated, TIN-POT

    OSG

    Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

    • Mengenrabatt
    ab
    16.12€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, for Stainless Steel, EX-SUS-POT

    Point Tap Series, for Stainless Steel, EX-SUS-POT

    OSG

    Great sharpness and durability when used in through holes of machinability bad stainless steel. It is also suitable in various kinds of heat-resistant steel and tough nickel chrome manganese steel, other stainless steels.

    • Mengenrabatt
    ab
    10.10€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, for Thin Plates, EX-SS-POT

    Point Tap Series, for Thin Plates, EX-SS-POT

    OSG

    Well suited for thread cutting of soft steel sheets with a pull strength of 700N or below. Achieves Beautiful Finishing Surfaces by Preventing Whiskers, Burrs, and Tears on Punched Holes and Buring Holes

    • Mengenrabatt
    ab
    7.61€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Titanium Coating Point Taps, PO - V (N - PO - V)

    Titanium Coating Point Taps, PO - V (N - PO - V)

    YAMAWA MFG

    * N-PO-V will be replaced with PO-V as soon as there is no more in stock.

    • Mengenrabatt
    ab
    13.57€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, for Deep Holes, EX-DH-POT

    Point Tap Series, for Deep Holes, EX-DH-POT

    OSG

    Suitable for through holes with extra long threads and materials that easily suffer sticking.

    • Mengenrabatt
    ab
    8.65€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Machine Nut Type, Fine Threads

    Machine Nut Type, Fine Threads

    SKC

    Meter (Left Screw, Right Screw)

    ab
    13.28€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, for Difficult-to-Machine Material, CPM-POT

    Point Tap Series, for Difficult-to-Machine Material, CPM-POT

    OSG

    Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

    • Mengenrabatt
    ab
    10.08€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Jet Taps

    Jet Taps [1-3 Stk. pro Packung]

    ISHIHASHI

    Large diameter of the tap core improves torsion strength; almost zero breakage occurrence.

    ab
    9.38€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Oversize Point Taps

    Oversize Point Taps

    SKC

    Enables High Speed High Longevity Machining by Delivering Machining Oil and Providing Effective Debris Removal From the Lubrication Hole

    ab
    15.07€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • A Tap Series Point Tap Long Shank A-LT-POT

    A Tap Series Point Tap Long Shank A-LT-POT

    OSG

    Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

    ab
    23.31€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • T Gun Tap TGN

    T Gun Tap TGN

    NACHI(FUJIKOSHI)

    General-use tap for threading of through holes.

    ab
    8.05€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, Long Shank for Deep Holes, EX-LT-DH-POT
    ab
    18.72€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Long Shank Titanium Coating Point Taps, LS-PO-V (LS-N-PO-V)

    Long Shank Titanium Coating Point Taps, LS-PO-V (LS-N-PO-V)

    YAMAWA MFG

    * LS-N-PO-V will be replaced with LS-PO-V as soon as there is no more in stock.

    • Mengenrabatt
    ab
    22.16€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Machine Nut Taps for Meter Coarse Screws (60° Angle)

    Machine Nut Taps for Meter Coarse Screws (60° Angle)

    SKC

    Meter (Left Screw, Right Screw)

    ab
    8.99€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Taps for Nickel - Base Alloys ZEN - P

    Taps for Nickel - Base Alloys ZEN - P

    YAMAWA MFG

    With nickel as the main component, the nickel based alloy tap is much more superior in its corrosion and heat-resisting properties compared to steel.

    • Mengenrabatt
    ab
    13.92€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Super Hard Taps for Super High Speed, for Aluminum Cast Iron and Bind Holes, HFACT-B

    Super Hard Taps for Super High Speed, for Aluminum Cast Iron and Bind Holes, HFACT-B

    YAMAWA MFG

    Uses a carbide tap with a center through hole shape that supports low temperature cool dry machining, and internally lubricating and mist systems through ultra high speed carbide tapping. It is suitable for blind hole of aluminum cast iron and aluminum die-casting.

    • Mengenrabatt
    ab
    125.25€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT
    ab
    14.02€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, V Coated, V-POT

    Point Tap Series, V Coated, V-POT

    OSG

    Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping

    • Mengenrabatt
    ab
    17.22€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Machine Nut Type for Wit Coarse Threads (55° Angle)
    ab
    9.13€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Cobalt Jet Tap

    Cobalt Jet Tap

    ISHIHASHI

    Having toughness associated with high-molybdenum, it performs high hardness, excellent heat and wear resistance.

    ab
    12.67€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Machine Nut Taps for Unified Fine Threads

    Machine Nut Taps for Unified Fine Threads

    SKC

    Left Screw, Right Screw

    ab
    11.63€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • I-Series General Purpose Point Tap IPO

    I-Series General Purpose Point Tap IPO

    YAMAWA MFG

    Suitable for screw machining in simple mounting of thin iron plates such as SPC, SPH and mild steel below SS400, S20C.

    ab
    5.05€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, for Titanium Alloy, V-TI-POT

    Point Tap Series, for Titanium Alloy, V-TI-POT

    OSG

    Achieves long tool life, high efficiency, high stability machining in solid-solution heat treated, age-treated titanium gold of 40 ~ 45HRC (such as TI-6AL-4V) used in aircraft and space industry, chemical industry, etc.

    • Mengenrabatt
    ab
    22.63€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, General Homo Treatment, EX-H-POT

    Point Tap Series, General Homo Treatment, EX-H-POT

    OSG

    Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

    • Mengenrabatt
    ab
    7.68€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Jet Taps for Deep Hole

    Jet Taps for Deep Hole

    ISHIHASHI

    Uses a short thread design groove made to increase debris removal, decrease friction, and improve lubricating oil delivery even when tapping to a depth of over twice the nominal diameter.

    ab
    9.48€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT

    Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT

    OSG

    Shows the great sharpness and durability when used in through holes of machinability bad stainless steel

    • Mengenrabatt
    ab
    14.02€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Oxidation Treatment Point Taps, PO-OX (N-PO-OX)

    Oxidation Treatment Point Taps, PO-OX (N-PO-OX)

    YAMAWA MFG

    * N-PO-OX will be replaced with PO-OX as soon as there is no more in stock.

    • Mengenrabatt
    ab
    7.27€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, for NI-Base Heat Resistant Alloys, NI-POT

    Point Tap Series, for NI-Base Heat Resistant Alloys, NI-POT

    OSG

    Demonstrates an excellent power in solid-solution heat treated, age-treated NI-base super alloys of 40 ~ 45HRC (such as Inconel R718) used in aircraft and space industry, chemical industry, etc.

    • Mengenrabatt
    ab
    14.02€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Jet Tap for Stainless Steel

    Jet Tap for Stainless Steel

    ISHIHASHI

    Reduced Friction Torque From Special Shape Design and Unique Second Machining

    ab
    10.16€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • G Oil Hole Tap GOH-T

    G Oil Hole Tap GOH-T

    NACHI(FUJIKOSHI)

    Patented oil cap allows sharing of through holes and blind holes.

    ab
    35.77€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Tap for High Hardness Steel EH-CT

    Carbide Tap for High Hardness Steel EH-CT

    YAMAWA MFG

    Ideal for tapping of high hardness steels 45 to 55 HRC, and hot die steels (SKS3, such as SKD11) Female screws with a maximum internal diameter of 6H are recommended for pilot holes.

    ab
    75.97€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

  • Thread Types

  • Thread Size (Nominal)

    • CTG-54
    • CTG-51
    • CTG-42
    • CTG-39
    • CTG-36
    • CTG-31
    • CTG-28
    • CTG-25
    • CTG-22
    • CTG-19
    • CTG-16
    • CTG-15
    • No.0-80UNF
    • No0UN
    • S0.1
    • S0.2
    • S0.3
    • S0.4
    • S0.5
    • S0.6
    • S0.7
    • S0.8
    • S0.9
    • 1"1/16U
    • 1"1/16UN
    • 1"1/2"UN
    • 1"1/2U
    • 1"1/2UN
    • 1"1/4"UN
    • 1"1/4U
    • 1"1/4UN
    • 1"1/8"UN
    • 1"1/8U
    • 1"1/8UN
    • 1"3/16U
    • 1"3/16UN
    • 1"3/4U
    • 1"3/4UN
    • 1"3/8"UN
    • 1"3/8U
    • 1"3/8UN
    • 1"5/16U
    • 1"5/16UN
    • 1"5/8U
    • 1"5/8UN
    • 1"7/8UN
    • 1' -11
    • 1' 1/2-11
    • 1' 1/4-11
    • 1'-11
    • 1'-11.5
    • 1'-12UNF
    • 1'-8UNC
    • 1'1/2-11
    • 1'1/4-11
    • 1'8UNC
    • 1'W8
    • 1-16-27
    • 1/16-27
    • 1/16-28
    • 1/2-13 UNC
    • 1/2-14
    • 1/2-20 UNF
    • 1/2UN
    • 1/2UNJ
    • 1/2W12
    • 1/4-18
    • 1/4-19
    • 1/4-20 UNC
    • 1/4-28 UNC
    • 1/4-28 UNF
    • 1/4UN
    • 1/4UNJ
    • 1/4W20
    • 1/8-18
    • 1/8-27
    • 1/8-28
    • 1/8N
    • 1/8SM44
    • 1/8UN
    • 1/8W40
    • 1UN
    • 1UNS
    • BC1
    • BSF1"1/2
    • BSF1"3/4
    • BSF1"3/8
    • BSF1"5/8
    • BSF1"7/8
    • G1
    • G1"1/2
    • G1"1/4
    • G1"1/8
    • G1"3/4
    • G1"3/8
    • G1/16
    • G1/2
    • G1/4
    • G1/8
    • G1PF
    • M1
    • M1~10
    • M1~6
    • NO.1-72UNF
    • NPS1
    • NPS1"1/2
    • NPS1"1/4
    • NPS1"1/8
    • NPS1"3/4
    • NPS1/16
    • NPS1/2
    • NPS1/4
    • NPS1/8
    • NPT1
    • NPT1"1/2
    • NPT1"1/4
    • NPT1"1/8
    • NPT1"3/4
    • NPT1/16
    • NPT1/2
    • NPT1/4
    • NPT1/4-18
    • NPT1/8
    • NPT1/8-27
    • No1UN
    • PF1
    • PF1'-11
    • PF1/2
    • PF1/4
    • PF1/4-19
    • PF1/8
    • PF1/8-28
    • PS1
    • PS1"1/2
    • PS1"1/4
    • PS1"1/8
    • PS1"3/8
    • PS1/2
    • PS1/2-14
    • PS1/4
    • PS1/4-19
    • PS1/8
    • PS1/8-28
    • PT1'-11
    • PT1/2-14
    • PT1/4-19
    • PT1/8-28
    • R1
    • R1"1/2
    • R1"1/4
    • R1"1/8
    • R1"3/4
    • R1"3/8
    • R1/16
    • R1/2
    • R1/4
    • R1/8
    • Rc1
    • Rc1/2
    • Rc1/4
    • Rc1/8
    • Rp1
    • Rp1"1/2
    • Rp1"1/4
    • Rp1"3/4
    • Rp1/16
    • Rp1/2
    • Rp1/4
    • Rp1/8
    • S1
    • SM1/2
    • SM1/4
    • SM1/8
    • W1
    • W1"1/16
    • W1"1/2
    • W1"1/4
    • W1"1/8
    • W1"3/16
    • W1"3/4
    • W1"3/8
    • W1"5/16
    • W1"5/8
    • W1"7/8
    • W1/16
    • W1/2
    • W1/4
    • W1/8
    • M1.1
    • M1.2
    • S1.2
    • BC1.37
    • M1.4
    • S1.4
    • M1.5
    • M1.6
    • M1.7
    • M1.8
    • 2"1/2UN
    • 2"1/4UN
    • 2"3/4UN
    • 2' -11
    • 2'-11
    • 2U
    • 2UN
    • BSF2
    • BSF2"1/4
    • G2
    • G2"1/2
    • M2
    • M2~10
    • M2~4.5
    • M2~8
    • NPS2
    • NPS2"1/2
    • NPS2"1/4
    • NPT2
    • NPT2"1/2
    • NPT2"1/4
    • No.2-56UNC
    • No.2-64UNC
    • No2UN
    • R2
    • R2"1/2
    • Rp2
    • Rp2"1/2
    • W/2
    • W2
    • W2"1/2
    • W2"1/4
    • W2"1/8
    • W2"3/4
    • W2"3/8
    • W2"7/8
    • M2.2
    • M2.3
    • M2.5
    • M2.6
    • 3"1/2UN
    • 3/16UN
    • 3/16W24
    • 3/4-10 UNC
    • 3/4-14
    • 3/4-16 UNF
    • 3/4UN
    • 3/4W10
    • 3/8-16 UNC
    • 3/8-18
    • 3/8-19
    • 3/8-24 UNF
    • 3/8-UNJ
    • 3/8UN
    • 3/8UNJ
    • 3/8W16
    • 3U
    • 3UN
    • BC3/8
    • G3
    • G3"1/2
    • G3/4
    • G3/8
    • M3
    • M3~10
    • M3~12
    • M3~5
    • M3~6
    • M3~8
    • NO.3-48UNC
    • NPS3
    • NPS3"1/2
    • NPS3/4
    • NPS3/8
    • NPT3
    • NPT3"1/2
    • NPT3/4
    • NPT3/8
    • No.3-56UNF
    • No3UN
    • PF3/4
    • PF3/4-14
    • PF3/8
    • PF3/8-19
    • PS3/4
    • PS3/8
    • PS3/8-19
    • PT3/4-14
    • PT3/8-19
    • R3
    • R3"1/2
    • R3/4
    • R3/8
    • Rc3/4
    • Rc3/8
    • Rp3
    • Rp3"1/2
    • Rp3/4
    • Rp3/8
    • SM3/16
    • SM3/32
    • SM3/8
    • W3
    • W3/16
    • W3/32
    • W3/4
    • W3/8
    • M3.5
    • 4UN
    • G4
    • M4
    • M4~10
    • M4~13
    • M4~14
    • M4~6
    • NO.4-48UNF
    • NPS4
    • NPT4
    • No.4-40UNC
    • No.4-40UNF
    • No4UN
    • R4
    • Rp4
    • W4"1/2
    • M4.5
    • 5/16-18 UNC
    • 5/16-24 UNF
    • 5/16UN
    • 5/16UNJ
    • 5/16W18
    • 5/32UN
    • 5/32W32
    • 5/8-11 UNC
    • 5/8-18 UNF
    • 5/8UN
    • 5/8W11
    • 5/W11
    • BC5/16
    • CTV5
    • G5/8
    • M5
    • M5~10
    • M5~12
    • M5~13
    • NO.5-40UNC
    • NPS5/8
    • NPT5/8
    • No.5-44UNC
    • No5UN
    • PS5/8
    • R5/8
    • SM5/16
    • W5/16
    • W5/32
    • W5/8
    • M5.5
    • M6
    • M6 – 20
    • NO.6-32UNC
    • No.6-32UNF
    • No.6-40UNC
    • No6UN
    • No6UNJ
    • W6
    • M6.5
    • W6.8
    • 7/16-14 UNC
    • 7/16-20 UNF
    • 7/16UN
    • 7/16UNJ
    • 7/32UN
    • 7/8-14 UNF
    • 7/8-9 UNC
    • 7/8UN
    • 7/8W9
    • G7/8
    • NPS7/8
    • NPT7/8
    • PG7
    • PS7/8
    • R7/8
    • SM7/16
    • SM7/32
    • W"7/8
    • W7
    • W7/16
    • W7/32
    • W7/8
    • m7
    • M7.5
    • CTV8
    • M8
    • M8~12
    • NO.8-32UNC
    • No.8-32UNF
    • No.8-36UNF
    • No8UN
    • No8UNJ
    • W8
    • M8.5
    • 9/16-18 UNF
    • 9/16UN
    • 9/64SM40
    • 9UN
    • BC9/16
    • M9
    • PG9
    • SM9/32
    • SM9/64
    • W9/16
    • M9.5
    • W9.5
    • W9.8
    • CTV10
    • M10
    • M10~13
    • M10~25
    • M10~30
    • No.10-24UNC
    • No.10-32UNC
    • No.10-32UNF
    • No10UN
    • No10UNJ
    • TM10
    • TW10
    • Tr10
    • W10
    • 11/64SM40
    • M11
    • PG11
    • SM11/32
    • SM11/64
    • W11
    • W11/16
    • M12
    • M]12
    • No.12-24UNC
    • No.12-28UNC
    • No12UN
    • TM12
    • TW12
    • W12
    • W12.5
    • M13
    • W13
    • PG13.5
    • W13.5
    • W13.8
    • M14
    • TM14
    • TW14
    • W14
    • M15
    • SM15/64
    • W15
    • W15/16
    • M16
    • PG16
    • TM16
    • TW16
    • Tr16
    • W16
    • M17
    • W17
    • M18
    • TM18
    • TW18
    • W18
    • M19
    • M19~32
    • M19~33
    • M19~38
    • M19~42
    • W19
    • M20
    • TM20
    • TW20
    • Tr20
    • W20
    • W20.32
    • M21
    • PG21
    • W21
    • M22
    • TM22
    • TW22
    • W22
    • M23
    • W23
    • M24
    • TM24
    • TW24
    • W24
    • M25
    • M25~50
    • M25~60
    • M25~70
    • M25~72
    • TM25
    • TW25
    • W25
    • M26
    • TM26
    • TW26
    • W26
    • M27
    • W27
    • M28
    • TM28
    • TW28
    • W28
    • M29
    • PG29
    • W29
    • M30
    • TM30
    • TW30
    • W30
    • M32
    • TM32
    • W32
    • M33
    • W33
    • M34
    • W34
    • M35
    • W35
    • M36
    • PG36
    • TM36
    • W36
    • M37
    • M38
    • W38
    • M39
    • W39
    • M40
    • TM40
    • W40
    • M42
    • M42~120
    • PG42
    • W42
    • M43
    • M44
    • W44
    • M45
    • W45
    • M46
    • M48
    • W48
    • M50
    • W50
    • M52
    • W52
    • M54
    • W54
    • M55
    • W55
    • M56
    • W56
    • M58
    • M60
    • W60
    • M62
    • W62
    • M64
    • M65
    • W65
    • M68
    • M70
    • W70
    • M72
    • M75
    • W75
    • M76
    • M78
    • M80
    • M82
    • M85
    • M90
    • M95
    • M100
    • M110
    • M115
    • M120
    • 06510X28R
    • 060163N050M
    • 060163N100M
    • 060163N125M
    • 065103X28G
    • 075203N150M
    • 080153X19G
    • 080153X19R
    • 090244N125M
    • 090244N175M
    • 100254N050M
    • 100254N100M
    • 100254N150M
    • 100254N200M
    • 120204X14G
    • 120204X14R
    • 120304N100M
    • 120304N150M
    • 120304N200M
    • 160264X11G
    • 160264X11R
    • 160404N150M
    • 160404N200M
    • 160404N250M
    • 200305X11G
    • 200305X11R
    • 200505N150M
    • 200505N200M
    • 200505N300M
  • Pitch (P), Thread Count(mm)

    • 0.025
    • 0.05
    • 0.08
    • 0.1
    • 0.125
    • 0.15
    • 0.175
    • 0.2
    • 0.225
    • 0.25
    • 0.3
    • 0.34
    • 0.35
    • 0.4
    • 0.45
    • 0.5
    • 0.6
    • 0.7
    • 0.75
    • 0.8
    • 0.9
    • 1
    • 1.25
    • 1.5
    • 1.5-2
    • 1.75
    • .02
    • 2
    • 2.5
    • 2.52
    • 3
    • 3 1/2
    • 3.5
    • 4
    • 4 1/2
    • 4.5
    • 5
    • 5.5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 11 1/2
    • 11/1/2
    • 11.5
    • 12
    • 13
    • 14
    • 16
    • 18
    • 19
    • 20
    • 24
    • 26
    • 27
    • 28
    • 30
    • 32
    • 36
    • 40
    • 44
    • 48
    • 56
    • 60
    • 64
    • 72
    • 80
  • Number of Chamfered Threads (Lcf)

    • 1 P
    • 1.5 P
    • 2 P
    • 2.5 P
    • 3 P
    • 3.5 P
    • 4 P
    • 4.5 P
    • 5 P
    • 6 P
    • 8 P
    • 9 P
    • 24 P
    • 25 P
    • 26 P
    • 27 P
    • 29 P
    • 30 P
  • Tool Material Type

  • Work Material

  • Tap Model

  • Bore Model

  • Coating Presence

  • Coating Type

  • Overall Length (L)(mm)

    • 30
    • 32
    • 34
    • 35
    • 36
    • 39
    • 40
    • 41.5
    • 42
    • 44
    • 45
    • 46
    • 48
    • 49
    • 50
    • 52
    • 54
    • 55
    • 57
    • 58
    • 59
    • 59.5
    • 60
    • 61
    • 61.5
    • 61.9
    • 62
    • 64
    • 65
    • 65.1
    • 66
    • 67
    • 68
    • 69
    • 70
    • 70/70/70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 78
    • 79
    • 79.4
    • 80
    • 81
    • 82
    • 82.6
    • 83
    • 84
    • 85
    • 86
    • 87
    • 88
    • 89
    • 90
    • 91
    • 92
    • 95
    • 95.3
    • 96
    • 97
    • 99
    • 100
    • 101.6
    • 102
    • 105
    • 108
    • 109
    • 110
    • 111
    • 112
    • 114.3
    • 115
    • 119
    • 120
    • 121
    • 122
    • 123
    • 125
    • 127
    • 130
    • 133
    • 135
    • 139.7
    • 140
    • 144
    • 145
    • 146
    • 148
    • 150
    • 152
    • 152.4
    • 155
    • 158
    • 159
    • 160
    • 165
    • 167
    • 170
    • 175
    • 180
    • 184
    • 185
    • 188
    • 190
    • 195
    • 200
    • 204
    • 205
    • 210
    • 215
    • 216
    • 220
    • 225
    • 230
    • 235
    • 240
    • 245
    • 250
    • 255
    • 260
    • 265
    • 270
    • 275
    • 280
    • 290
    • 300
    • 310
    • 315
    • 320
    • 330
    • 340
    • 350
    • 370
    • 390
    • 410
    • 420
    • 435
    • 440
    • 450
    • 460
    • 500
    • 505
    • 525
    • 540
    • 590
    • 780
    • 890
    • 900
    • 1000
    • 1050
    • 1210
    • 1250
    • 1270
    • 1480

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen