• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Punktgewindebohrer(Seite2)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • Point Tap for Difficult-To-Cut Materials EH-PO

    Point Tap for Difficult-To-Cut Materials EH-PO

    YAMAWA MFG

    35 ~ 45 HRC hardness of high-carbon steels, alloy steel forgings and tempered materials, mold materials and other, is suitable for tapping of high hardness steel.

    • Mengenrabatt
    ab
    9.25€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT

    Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT

    OSG

    Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

    ab
    27.13€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • High-Carbon Steel Point Tap HC+PO / HC-PO

    High-Carbon Steel Point Tap HC+PO / HC-PO

    YAMAWA MFG

    Suitable for tapping high carbon steel like S55C etc.

    • Mengenrabatt
    ab
    7.31€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Long Neck Jet Taps

    Long Neck Jet Taps

    ISHIHASHI

    Long Neck Type for Through Hole Machining

    ab
    17.37€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, V Coating, Long Shank, V-LT-POT

    Point Tap Series, V Coating, Long Shank, V-LT-POT

    OSG

    Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping

    ab
    22.83€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, Ultra Synchronizing Taps for Aluminum, HS-AL-RFT

    Point Tap Series, Ultra Synchronizing Taps for Aluminum, HS-AL-RFT

    OSG

    Can conduct high speed / high precision thread cutting of aluminum and aluminum alloys when used exclusively with tools equipped with complete lead feeding machinery.

    • Mengenrabatt
    ab
    11.81€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Machine Nut Taps for Coarse Screws

    Machine Nut Taps for Coarse Screws

    SKC

    Left Screw, Right Screw

    ab
    11.13€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT

    Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT

    OSG

    In applying HR coating with high welding-resisting properties on nickel based alloys, it achieves a long operating life even on aging nickel based alloys (40-45 HRC)

    ab
    21.93€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Insert Screw Tap Series, Point Tap EX-HL-POT

    Insert Screw Tap Series, Point Tap EX-HL-POT

    OSG

    Used For Threading of Screws Used for in Through Holes Inserts (Helical Coil)

    • Mengenrabatt
    ab
    13.62€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Nut Taps NT

    Nut Taps NT

    YAMAWA MFG

    Straight shaped nut type primarily for working on nuts on thread cutting boards.

    • Mengenrabatt
    ab
    20.84€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Plus Series Point Tap Oxidation Treatment, +PO-OX (N+PO-OX)

    Plus Series Point Tap Oxidation Treatment, +PO-OX (N+PO-OX)

    YAMAWA MFG

    *N+PO-OX will be replaced with +PO-OX as soon as there is no more in stock.

    • Mengenrabatt
    ab
    13.64€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, for Copper, CU-POT

    Point Tap Series, for Copper, CU-POT

    OSG

    Treated With CRN Coating Which Shows Excellent Friction Resistance and Anti-Sticking Properties Against Copper and Use of HSSE as Material Allows Long Lived Machining on Copper

    • Mengenrabatt
    ab
    16.82€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • General Point Taps

    General Point Taps

    SKC

    Homo-treated Process

    ab
    11.63€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Insert Screw Tap Series, Point Tap, Long Shank, HL-LT-POT

    Insert Screw Tap Series, Point Tap, Long Shank, HL-LT-POT

    OSG

    Used For Threading of Screws Used for in Through Holes Inserts (Helical Coil)

    • Mengenrabatt
    ab
    19.32€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Super Hard Taps for Super High Speed, for Cast Iron and Bind Holes, HFICT-B

    Super Hard Taps for Super High Speed, for Cast Iron and Bind Holes, HFICT-B

    YAMAWA MFG

    Uses a carbide tap with a center through hole shape that supports low temperature cool dry machining, and internally lubricating and mist systems through ultra high speed carbide tapping. It is suitable for blind hole of cast iron.

    • Mengenrabatt
    ab
    125.25€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • G Gun Tap GGN

    G Gun Tap GGN

    NACHI(FUJIKOSHI)

    Can do high speed / high efficiency threading of through holes in everything from standard steel to difficult to grind materials.

    ab
    15.38€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • T Gun Tap for Stainless Steel TGNS

    T Gun Tap for Stainless Steel TGNS

    NACHI(FUJIKOSHI)

    Suited for through hole screw machining on stainless steel and heat resistant steel.

    ab
    8.86€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, Ultra Synchronizing Taps, HS-RFT

    Point Tap Series, Ultra Synchronizing Taps, HS-RFT

    OSG

    Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

    • Mengenrabatt
    ab
    20.22€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Short Point Tap for Deep Hole S-PO

    Short Point Tap for Deep Hole S-PO

    YAMAWA MFG

    Effective in deep hole tapping of more than 2.5 times the nominal diameter, with less frictional resistance due to short length of the threaded portion, and good cutting oil supplying.

    ab
    8.77€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT

    Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT

    OSG

    Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

    • Mengenrabatt
    ab
    18.72€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Taps (Meter Screws)

    Point Taps (Meter Screws)

    TRUSCO NAKAYAMA

    [Features] High-speed tapping is possible. Homogenization treated. [Use] For through hole machining. Work materials: general steel, low to cedium carbon steel, alloy steel.

    ab
    8.55€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Super Hard Taps for Super High Speed, for Aluminum Cast Iron and Through Holes, HFACT-P

    Super Hard Taps for Super High Speed, for Aluminum Cast Iron and Through Holes, HFACT-P

    YAMAWA MFG

    Uses a carbide tap with a side through hole shape that supports low temperature cool dry machining, and internally lubricating and mist systems through ultra high speed carbide tapping. It is suitable for through holes of aluminum cast iron and aluminum die-casting.

    • Mengenrabatt
    ab
    125.25€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • G Gun Tap, Long Shank GGNL

    G Gun Tap, Long Shank GGNL

    NACHI(FUJIKOSHI)

    The standard size is used when the protruding length is insufficient.

    ab
    27.84€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, with Oil Holes, OIL-POT

    Point Tap Series, with Oil Holes, OIL-POT

    OSG

    Effective for horizontal work on through holes and machining deep holes. Oil Hole Allows Cutting Lubricant to be Applied to the Cutting Edge and Peform High Speed and High Accuracy Tapping

    • Mengenrabatt
    ab
    14.62€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, Ultra Synchronizing Taps, US-AL-RFT
    ab
    17.82€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Super Hard Taps for Super High Speed, for Cast Iron and Through Holes, HFICT-P

    Super Hard Taps for Super High Speed, for Cast Iron and Through Holes, HFICT-P

    YAMAWA MFG

    Uses a carbide tap with a side through hole shape that supports low temperature cool dry machining, and internally lubricating and mist systems through ultra high speed carbide tapping. It is suitable for through holes of cast iron.

    • Mengenrabatt
    ab
    125.25€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Long Jet Taps

    Long Jet Taps

    ISHIHASHI

    Cutting torque is extremely light for shear cutting, due to spiral cutting edge and large angle.

    ab
    12.41€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT

    Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT

    OSG

    Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

    • Mengenrabatt
    ab
    22.83€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, High Speed Synchronizing Taps with Oil Holes for Steel, VPO-US-POT

    Point Tap Series, High Speed Synchronizing Taps with Oil Holes for Steel, VPO-US-POT

    OSG

    Can Perform Tapping of the S45C at Speeds of 50M / MIN and Above

    ab
    30.14€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT

    Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT

    OSG

    Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

    • Mengenrabatt
    ab
    21.73€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Parallel Tap Series for Pipes Point Tap EX-POT-SPT
    ab
    17.22€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Y - Series General Purpose Point Tap PO - Y

    Y - Series General Purpose Point Tap PO - Y

    YAMAWA MFG

    Suitable for screw machining in simple mounting of thin iron plates such as SPC, SPH and mild steel below SS400, S20C.

    ab
    8.31€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

  • Thread Types

  • Thread Size (Nominal)

    • CTG-54
    • CTG-51
    • CTG-42
    • CTG-39
    • CTG-36
    • CTG-31
    • CTG-28
    • CTG-25
    • CTG-22
    • CTG-19
    • CTG-16
    • CTG-15
    • No.0-80UNF
    • No0UN
    • S0.1
    • S0.2
    • S0.3
    • S0.4
    • S0.5
    • S0.6
    • S0.7
    • S0.8
    • S0.9
    • 1"1/16U
    • 1"1/16UN
    • 1"1/2"UN
    • 1"1/2U
    • 1"1/2UN
    • 1"1/4"UN
    • 1"1/4U
    • 1"1/4UN
    • 1"1/8"UN
    • 1"1/8U
    • 1"1/8UN
    • 1"3/16U
    • 1"3/16UN
    • 1"3/4U
    • 1"3/4UN
    • 1"3/8"UN
    • 1"3/8U
    • 1"3/8UN
    • 1"5/16U
    • 1"5/16UN
    • 1"5/8U
    • 1"5/8UN
    • 1"7/8UN
    • 1' -11
    • 1' 1/2-11
    • 1' 1/4-11
    • 1'-11
    • 1'-11.5
    • 1'-12UNF
    • 1'-8UNC
    • 1'1/2-11
    • 1'1/4-11
    • 1'8UNC
    • 1'W8
    • 1-16-27
    • 1/16-27
    • 1/16-28
    • 1/2-13 UNC
    • 1/2-14
    • 1/2-20 UNF
    • 1/2UN
    • 1/2UNJ
    • 1/2W12
    • 1/4-18
    • 1/4-19
    • 1/4-20 UNC
    • 1/4-28 UNC
    • 1/4-28 UNF
    • 1/4UN
    • 1/4UNJ
    • 1/4W20
    • 1/8-18
    • 1/8-27
    • 1/8-28
    • 1/8N
    • 1/8SM44
    • 1/8UN
    • 1/8W40
    • 1UN
    • 1UNS
    • BC1
    • BSF1"1/2
    • BSF1"3/4
    • BSF1"3/8
    • BSF1"5/8
    • BSF1"7/8
    • G1
    • G1"1/2
    • G1"1/4
    • G1"1/8
    • G1"3/4
    • G1"3/8
    • G1/16
    • G1/2
    • G1/4
    • G1/8
    • G1PF
    • M1
    • M1~10
    • M1~6
    • NO.1-72UNF
    • NPS1
    • NPS1"1/2
    • NPS1"1/4
    • NPS1"1/8
    • NPS1"3/4
    • NPS1/16
    • NPS1/2
    • NPS1/4
    • NPS1/8
    • NPT1
    • NPT1"1/2
    • NPT1"1/4
    • NPT1"1/8
    • NPT1"3/4
    • NPT1/16
    • NPT1/2
    • NPT1/4
    • NPT1/4-18
    • NPT1/8
    • NPT1/8-27
    • No1UN
    • PF1
    • PF1'-11
    • PF1/2
    • PF1/4
    • PF1/4-19
    • PF1/8
    • PF1/8-28
    • PS1
    • PS1"1/2
    • PS1"1/4
    • PS1"1/8
    • PS1"3/8
    • PS1/2
    • PS1/2-14
    • PS1/4
    • PS1/4-19
    • PS1/8
    • PS1/8-28
    • PT1'-11
    • PT1/2-14
    • PT1/4-19
    • PT1/8-28
    • R1
    • R1"1/2
    • R1"1/4
    • R1"1/8
    • R1"3/4
    • R1"3/8
    • R1/16
    • R1/2
    • R1/4
    • R1/8
    • Rc1
    • Rc1/2
    • Rc1/4
    • Rc1/8
    • Rp1
    • Rp1"1/2
    • Rp1"1/4
    • Rp1"3/4
    • Rp1/16
    • Rp1/2
    • Rp1/4
    • Rp1/8
    • S1
    • SM1/2
    • SM1/4
    • SM1/8
    • W1
    • W1"1/16
    • W1"1/2
    • W1"1/4
    • W1"1/8
    • W1"3/16
    • W1"3/4
    • W1"3/8
    • W1"5/16
    • W1"5/8
    • W1"7/8
    • W1/16
    • W1/2
    • W1/4
    • W1/8
    • M1.1
    • M1.2
    • S1.2
    • BC1.37
    • M1.4
    • S1.4
    • M1.5
    • M1.6
    • M1.7
    • M1.8
    • 2"1/2UN
    • 2"1/4UN
    • 2"3/4UN
    • 2' -11
    • 2'-11
    • 2U
    • 2UN
    • BSF2
    • BSF2"1/4
    • G2
    • G2"1/2
    • M2
    • M2~10
    • M2~4.5
    • M2~8
    • NPS2
    • NPS2"1/2
    • NPS2"1/4
    • NPT2
    • NPT2"1/2
    • NPT2"1/4
    • No.2-56UNC
    • No.2-64UNC
    • No2UN
    • R2
    • R2"1/2
    • Rp2
    • Rp2"1/2
    • W/2
    • W2
    • W2"1/2
    • W2"1/4
    • W2"1/8
    • W2"3/4
    • W2"3/8
    • W2"7/8
    • M2.2
    • M2.3
    • M2.5
    • M2.6
    • 3"1/2UN
    • 3/16UN
    • 3/16W24
    • 3/4-10 UNC
    • 3/4-14
    • 3/4-16 UNF
    • 3/4UN
    • 3/4W10
    • 3/8-16 UNC
    • 3/8-18
    • 3/8-19
    • 3/8-24 UNF
    • 3/8-UNJ
    • 3/8UN
    • 3/8UNJ
    • 3/8W16
    • 3U
    • 3UN
    • BC3/8
    • G3
    • G3"1/2
    • G3/4
    • G3/8
    • M3
    • M3~10
    • M3~12
    • M3~5
    • M3~6
    • M3~8
    • NO.3-48UNC
    • NPS3
    • NPS3"1/2
    • NPS3/4
    • NPS3/8
    • NPT3
    • NPT3"1/2
    • NPT3/4
    • NPT3/8
    • No.3-56UNF
    • No3UN
    • PF3/4
    • PF3/4-14
    • PF3/8
    • PF3/8-19
    • PS3/4
    • PS3/8
    • PS3/8-19
    • PT3/4-14
    • PT3/8-19
    • R3
    • R3"1/2
    • R3/4
    • R3/8
    • Rc3/4
    • Rc3/8
    • Rp3
    • Rp3"1/2
    • Rp3/4
    • Rp3/8
    • SM3/16
    • SM3/32
    • SM3/8
    • W3
    • W3/16
    • W3/32
    • W3/4
    • W3/8
    • M3.5
    • 4UN
    • G4
    • M4
    • M4~10
    • M4~13
    • M4~14
    • M4~6
    • NO.4-48UNF
    • NPS4
    • NPT4
    • No.4-40UNC
    • No.4-40UNF
    • No4UN
    • R4
    • Rp4
    • W4"1/2
    • M4.5
    • 5/16-18 UNC
    • 5/16-24 UNF
    • 5/16UN
    • 5/16UNJ
    • 5/16W18
    • 5/32UN
    • 5/32W32
    • 5/8-11 UNC
    • 5/8-18 UNF
    • 5/8UN
    • 5/8W11
    • 5/W11
    • BC5/16
    • CTV5
    • G5/8
    • M5
    • M5~10
    • M5~12
    • M5~13
    • NO.5-40UNC
    • NPS5/8
    • NPT5/8
    • No.5-44UNC
    • No5UN
    • PS5/8
    • R5/8
    • SM5/16
    • W5/16
    • W5/32
    • W5/8
    • M5.5
    • M6
    • M6 – 20
    • NO.6-32UNC
    • No.6-32UNF
    • No.6-40UNC
    • No6UN
    • No6UNJ
    • W6
    • M6.5
    • W6.8
    • 7/16-14 UNC
    • 7/16-20 UNF
    • 7/16UN
    • 7/16UNJ
    • 7/32UN
    • 7/8-14 UNF
    • 7/8-9 UNC
    • 7/8UN
    • 7/8W9
    • G7/8
    • NPS7/8
    • NPT7/8
    • PG7
    • PS7/8
    • R7/8
    • SM7/16
    • SM7/32
    • W"7/8
    • W7
    • W7/16
    • W7/32
    • W7/8
    • m7
    • M7.5
    • CTV8
    • M8
    • M8~12
    • NO.8-32UNC
    • No.8-32UNF
    • No.8-36UNF
    • No8UN
    • No8UNJ
    • W8
    • M8.5
    • 9/16-18 UNF
    • 9/16UN
    • 9/64SM40
    • 9UN
    • BC9/16
    • M9
    • PG9
    • SM9/32
    • SM9/64
    • W9/16
    • M9.5
    • W9.5
    • W9.8
    • CTV10
    • M10
    • M10~13
    • M10~25
    • M10~30
    • No.10-24UNC
    • No.10-32UNC
    • No.10-32UNF
    • No10UN
    • No10UNJ
    • TM10
    • TW10
    • Tr10
    • W10
    • 11/64SM40
    • M11
    • PG11
    • SM11/32
    • SM11/64
    • W11
    • W11/16
    • M12
    • M]12
    • No.12-24UNC
    • No.12-28UNC
    • No12UN
    • TM12
    • TW12
    • W12
    • W12.5
    • M13
    • W13
    • PG13.5
    • W13.5
    • W13.8
    • M14
    • TM14
    • TW14
    • W14
    • M15
    • SM15/64
    • W15
    • W15/16
    • M16
    • PG16
    • TM16
    • TW16
    • Tr16
    • W16
    • M17
    • W17
    • M18
    • TM18
    • TW18
    • W18
    • M19
    • M19~32
    • M19~33
    • M19~38
    • M19~42
    • W19
    • M20
    • TM20
    • TW20
    • Tr20
    • W20
    • W20.32
    • M21
    • PG21
    • W21
    • M22
    • TM22
    • TW22
    • W22
    • M23
    • W23
    • M24
    • TM24
    • TW24
    • W24
    • M25
    • M25~50
    • M25~60
    • M25~70
    • M25~72
    • TM25
    • TW25
    • W25
    • M26
    • TM26
    • TW26
    • W26
    • M27
    • W27
    • M28
    • TM28
    • TW28
    • W28
    • M29
    • PG29
    • W29
    • M30
    • TM30
    • TW30
    • W30
    • M32
    • TM32
    • W32
    • M33
    • W33
    • M34
    • W34
    • M35
    • W35
    • M36
    • PG36
    • TM36
    • W36
    • M37
    • M38
    • W38
    • M39
    • W39
    • M40
    • TM40
    • W40
    • M42
    • M42~120
    • PG42
    • W42
    • M43
    • M44
    • W44
    • M45
    • W45
    • M46
    • M48
    • W48
    • M50
    • W50
    • M52
    • W52
    • M54
    • W54
    • M55
    • W55
    • M56
    • W56
    • M58
    • M60
    • W60
    • M62
    • W62
    • M64
    • M65
    • W65
    • M68
    • M70
    • W70
    • M72
    • M75
    • W75
    • M76
    • M78
    • M80
    • M82
    • M85
    • M90
    • M95
    • M100
    • M110
    • M115
    • M120
    • 06510X28R
    • 060163N050M
    • 060163N100M
    • 060163N125M
    • 065103X28G
    • 075203N150M
    • 080153X19G
    • 080153X19R
    • 090244N125M
    • 090244N175M
    • 100254N050M
    • 100254N100M
    • 100254N150M
    • 100254N200M
    • 120204X14G
    • 120204X14R
    • 120304N100M
    • 120304N150M
    • 120304N200M
    • 160264X11G
    • 160264X11R
    • 160404N150M
    • 160404N200M
    • 160404N250M
    • 200305X11G
    • 200305X11R
    • 200505N150M
    • 200505N200M
    • 200505N300M
  • Pitch (P), Thread Count(mm)

    • 0.025
    • 0.05
    • 0.08
    • 0.1
    • 0.125
    • 0.15
    • 0.175
    • 0.2
    • 0.225
    • 0.25
    • 0.3
    • 0.34
    • 0.35
    • 0.4
    • 0.45
    • 0.5
    • 0.6
    • 0.7
    • 0.75
    • 0.8
    • 0.9
    • 1
    • 1.25
    • 1.5
    • 1.5-2
    • 1.75
    • .02
    • 2
    • 2.5
    • 2.52
    • 3
    • 3 1/2
    • 3.5
    • 4
    • 4 1/2
    • 4.5
    • 5
    • 5.5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 11 1/2
    • 11/1/2
    • 11.5
    • 12
    • 13
    • 14
    • 16
    • 18
    • 19
    • 20
    • 24
    • 26
    • 27
    • 28
    • 30
    • 32
    • 36
    • 40
    • 44
    • 48
    • 56
    • 60
    • 64
    • 72
    • 80
  • Number of Chamfered Threads (Lcf)

    • 1 P
    • 1.5 P
    • 2 P
    • 2.5 P
    • 3 P
    • 3.5 P
    • 4 P
    • 4.5 P
    • 5 P
    • 6 P
    • 8 P
    • 9 P
    • 24 P
    • 25 P
    • 26 P
    • 27 P
    • 29 P
    • 30 P
  • Tool Material Type

  • Work Material

  • Tap Model

  • Bore Model

  • Coating Presence

  • Coating Type

  • Overall Length (L)(mm)

    • 30
    • 32
    • 34
    • 35
    • 36
    • 39
    • 40
    • 41.5
    • 42
    • 44
    • 45
    • 46
    • 48
    • 49
    • 50
    • 52
    • 54
    • 55
    • 57
    • 58
    • 59
    • 59.5
    • 60
    • 61
    • 61.5
    • 61.9
    • 62
    • 64
    • 65
    • 65.1
    • 66
    • 67
    • 68
    • 69
    • 70
    • 70/70/70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 78
    • 79
    • 79.4
    • 80
    • 81
    • 82
    • 82.6
    • 83
    • 84
    • 85
    • 86
    • 87
    • 88
    • 89
    • 90
    • 91
    • 92
    • 95
    • 95.3
    • 96
    • 97
    • 99
    • 100
    • 101.6
    • 102
    • 105
    • 108
    • 109
    • 110
    • 111
    • 112
    • 114.3
    • 115
    • 119
    • 120
    • 121
    • 122
    • 123
    • 125
    • 127
    • 130
    • 133
    • 135
    • 139.7
    • 140
    • 144
    • 145
    • 146
    • 148
    • 150
    • 152
    • 152.4
    • 155
    • 158
    • 159
    • 160
    • 165
    • 167
    • 170
    • 175
    • 180
    • 184
    • 185
    • 188
    • 190
    • 195
    • 200
    • 204
    • 205
    • 210
    • 215
    • 216
    • 220
    • 225
    • 230
    • 235
    • 240
    • 245
    • 250
    • 255
    • 260
    • 265
    • 270
    • 275
    • 280
    • 290
    • 300
    • 310
    • 315
    • 320
    • 330
    • 340
    • 350
    • 370
    • 390
    • 410
    • 420
    • 435
    • 440
    • 450
    • 460
    • 500
    • 505
    • 525
    • 540
    • 590
    • 780
    • 890
    • 900
    • 1000
    • 1050
    • 1210
    • 1250
    • 1270
    • 1480

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen