• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Zentrieren / Senken(Seite2)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 32 Tage oder weniger
  • 98 Tage oder weniger
  • Countersink (for Machining Center) CS - Q

    Countersink (for Machining Center) CS - Q

    YAMAWA MFG

    Is capable of high precision and stable machining of round hole chamfering and small screw, bolt attachment surface chamfering.

    ab
    7.20€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Strong Helix Groove A-Shaped 90°Center Hole Drill CE-Q

    Strong Helix Groove A-Shaped 90°Center Hole Drill CE-Q

    YAMAWA MFG

    Suited for Center Hole Drilling in Soft and/or Sticky Materials

    • Mengenrabatt
    ab
    8.31€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • HSS SP Center, 90°

    HSS SP Center, 90°

    IWATA TOOL

    Cutting edge is not lacking due to long service life. The tip chipping prevented by double-angle point. No tip breakage as compared with the conventional center drill. Excellent sharpness in the strong twist design.

    ab
    6.84€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Super Hard SP Center, 120°

    Super Hard SP Center, 120°

    IWATA TOOL

    Position a drill and chamfer various types of work including steel, stainless steel. tempered metal, and aluminum.

    ab
    12.96€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Super Hard SP Center, 90°

    Super Hard SP Center, 90°

    IWATA TOOL

    Position a drill and chamfer various types of work including steel, stainless steel. tempered metal, and aluminum.

    ab
    20.69€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Super Hard Center Drill, A-Shape, 60°

    Super Hard Center Drill, A-Shape, 60°

    IWATA TOOL

    Improve the toughness of various machining suitable carbide material and reduces breakage problems due to shape optimization. Allows high-speed machining and longer tool life.

    ab
    39.14€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Straight Shank, Countersink, HSS, Non-Coated, 90°

    Straight Shank, Countersink, HSS, Non-Coated, 90°

    ILIX

    Suitable for chamfering, countersinking, and deburring. Both machine and manual operations accepted.

    ab
    23.14€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Long Shank Strong Spiral Flute A Type 90°, Center Hole Drills, CE - QL

    Long Shank Strong Spiral Flute A Type 90°, Center Hole Drills, CE - QL

    YAMAWA MFG

    Suited for Center Hole Drilling in Soft and/or Sticky Materials

    • Mengenrabatt
    ab
    28.00€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Strong Helix Groove A Type 60° Center Hole Drill (Former JIS1 Type) CE-S (I)

    Strong Helix Groove A Type 60° Center Hole Drill (Former JIS1 Type) CE-S (I)

    YAMAWA MFG

    Suited for Center Hole Drilling in Soft and/or Sticky Materials

    • Mengenrabatt
    ab
    9.97€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • HSS Long Center Drill, A-Shape, 60°

    HSS Long Center Drill, A-Shape, 60°

    IWATA TOOL

    A center drill with high sharpness and excellent durability. Provides a combination of sharpness and breakage resistance by combining the use of cobalt high speed steel, increased tool accuracy, and optimization of its shape.

    ab
    18.54€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Center Drills Okabe Standards 1 Type 60°

    Center Drills Okabe Standards 1 Type 60°

    NAKAJIMAKOUKI

    Center Drill Produced Using the Best Heat Treatment

    ab
    8.70€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Long Shank Weak Twist Groove A Type 60° Center Hole Drill CD-SL

    Long Shank Weak Twist Groove A Type 60° Center Hole Drill CD-SL

    YAMAWA MFG

    Suited for Center Hole Drilling in Soft and/or Sticky Materials

    • Mengenrabatt
    ab
    25.77€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • HSS SP Center, 90°, TICN Coating

    HSS SP Center, 90°, TICN Coating

    IWATA TOOL

    Cutting edge is not lacking due to long service life. The tip chipping prevented by double-angle point. No tip breakage as compared with the conventional center drill. Excellent sharpness in the strong twist design.

    ab
    10.39€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Center Drills Okabe Standards 1 Type Super Hard 60°

    Center Drills Okabe Standards 1 Type Super Hard 60°

    NAKAJIMAKOUKI

    Center Drill Produced Using the Best Heat Treatment

    ab
    95.91€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide NC Center Drill 1107

    Carbide NC Center Drill 1107

    DIXI

    Performs high-quality chamfering, high rigidity, high accuracy positioning determined by the structure of a small chisel, accurate positioning at the slopes and curved surfaces.

    ab
    38.11€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Super Hard HG Center Drill, A-Shape, 90°

    Super Hard HG Center Drill, A-Shape, 90°

    IWATA TOOL

    Mass production of high-grade center drill. Thorough improvement of takt time and achieving of stable tool life.

    ab
    47.15€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Center Drills Okabe Standards JIS 2 Type 60° x 120°

    Center Drills Okabe Standards JIS 2 Type 60° x 120°

    NAKAJIMAKOUKI

    Center Drill Produced Using the Best Heat Treatment

    ab
    18.91€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Center Drills Okabe Pre-Standards 1 Type 90°

    Center Drills Okabe Pre-Standards 1 Type 90°

    NAKAJIMAKOUKI

    Center Drill Produced Using the Best Heat Treatment

    ab
    12.20€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Point Drill Joint Tool PE-90° C-PE-Q-V

    Carbide Point Drill Joint Tool PE-90° C-PE-Q-V

    YAMAWA MFG

    Point Angle 125°, Chamfer Angle 90°The two angles allow simultaneous centering and chamfering. Two-stepped flat surface design allows good bite and achieves high machining precision.

    • Mengenrabatt
    ab
    74.55€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Center Drill / Non-Coated KCD-60

    Carbide Center Drill / Non-Coated KCD-60

    KYOWA SEIKO

    Helix angle 30 ° at both the tip diameter and the wide diameter. Reduces burring and allows high efficiency machining.

    • Mengenrabatt
    ab
    48.49€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Pointing Drill Tips 120°, for Steel Material, 3.175 mm Shank

    Pointing Drill Tips 120°, for Steel Material, 3.175 mm Shank

    ATOM

    Drill especially for machining guide holes of ultra fine holes. Suitable for machining and positioning holes with high precision. Additional Small Diameter Sizes: φ 0.03 ~ φ 0.3 at 0.01 mm Intervals

    ab
    36.24€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Center Drills JIS A Type 60°

    Center Drills JIS A Type 60°

    NAKAJIMAKOUKI

    Center Drill Produced Using the Best Heat Treatment

    ab
    7.10€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TICN Coated Point Drill PE - 90° PE - Q - V

    TICN Coated Point Drill PE - 90° PE - Q - V

    YAMAWA MFG

    Point Angle 125°, Chamfer Angle 90°The two angles allow simultaneous centering and chamfering. Two-stepped flat surface design allows good bite and achieves high machining precision.

    ab
    23.42€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Center Drills Okabe Standards 1 Type G-Coated 60°

    Center Drills Okabe Standards 1 Type G-Coated 60°

    NAKAJIMAKOUKI

    Center Drill Produced Using the Best Heat Treatment

    ab
    17.74€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Point Drill Joint Tool PE - 90° PE - Q

    Point Drill Joint Tool PE - 90° PE - Q

    YAMAWA MFG

    Point Angle 125°, Chamfer Angle 90°The two angles allow simultaneous centering and chamfering. Two-stepped flat surface design allows good bite and achieves high machining precision.

    • Mengenrabatt
    ab
    11.68€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Strong Helix Groove JIS A-Shaped 90°Center Hole Drill CEQA

    Strong Helix Groove JIS A-Shaped 90°Center Hole Drill CEQA

    YAMAWA MFG

    Suited for Center Hole Drilling in Soft and/or Sticky Materials

    • Mengenrabatt
    ab
    6.11€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Weak Helix Groove A-Shaped 60°Center Hole Drill CD-S

    Weak Helix Groove A-Shaped 60°Center Hole Drill CD-S

    YAMAWA MFG

    Suited for Center Hole Drilling in Soft and/or Sticky Materials

    • Mengenrabatt
    ab
    6.90€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Slight Spiral Flute A Type 90°, Super Hard Center Hole Drills C-CD-S

    Slight Spiral Flute A Type 90°, Super Hard Center Hole Drills C-CD-S

    YAMAWA MFG

    Suited for Center Hole Drilling in Soft and/or Sticky Materials

    • Mengenrabatt
    ab
    60.53€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Straight Shank, Countersink, HSS, Non-Coated, 60°

    Straight Shank, Countersink, HSS, Non-Coated, 60°

    ILIX

    Suitable for chamfering, countersinking, and deburring. Both machine and manual operations accepted.

    ab
    25.44€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • HSS HG Center Drill, A-Shape, 60°

    HSS HG Center Drill, A-Shape, 60°

    IWATA TOOL

    Mass production of high-grade center drill. Thorough improvement of takt time and achieving of stable tool life.

    ab
    7.55€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Pointing Drill Tips 120°, for Steel Material, 3.175 mm Shank (TIALN Coating)

    Pointing Drill Tips 120°, for Steel Material, 3.175 mm Shank (TIALN Coating)

    ATOM

    Drill especially for machining guide holes of ultra fine holes. Suitable for machining and positioning holes with high precision. TIALN coating improves abrasion resistance, allowing long lived machining work. Additional Small Diameter Sizes: φ 0.03 ~ φ 0.3 at 0.01 mm Intervals

    ab
    43.18€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Pointing Drill Tips 120°, for Steel Material, 3 mm Shank (TIALN Coating)

    Pointing Drill Tips 120°, for Steel Material, 3 mm Shank (TIALN Coating)

    ATOM

    Drill especially for machining guide holes of ultra fine holes. Suitable for machining and positioning holes with high precision. TIALN coating improves abrasion resistance, allowing long lived machining work. Additional Small Diameter Sizes: φ 0.03 ~ φ 0.3 at 0.01 mm Intervals

    ab
    43.18€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Pointing Drill Tips 90°, for Nonferrous Metal / Resin, 3 mm Shank

    Pointing Drill Tips 90°, for Nonferrous Metal / Resin, 3 mm Shank

    ATOM

    Drill especially for machining guide holes of ultra fine holes. Suitable for machining and positioning holes with high precision. Additional Small Diameter Sizes: φ 0.03 ~ φ 0.3 at 0.01 mm Intervals

    ab
    36.24€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Center Drills Okabe Standards JIS 1 Type 90°

    Center Drills Okabe Standards JIS 1 Type 90°

    NAKAJIMAKOUKI

    Center Drill Produced Using the Best Heat Treatment

    ab
    8.87€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Center Drills Okabe Standards Long Center Drills G-coated 60°

    Center Drills Okabe Standards Long Center Drills G-coated 60°

    NAKAJIMAKOUKI

    Center Drill Produced Using the Best Heat Treatment

    ab
    49.23€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Strong Helix Groove JIS C-Shaped 60°Center Hole Drill CESC

    Strong Helix Groove JIS C-Shaped 60°Center Hole Drill CESC

    YAMAWA MFG

    Suited for Center Hole Drilling in Soft and/or Sticky Materials

    • Mengenrabatt
    ab
    13.95€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • HSS SP Center, 120°

    HSS SP Center, 120°

    IWATA TOOL

    Cutting edge is not lacking due to long service life. The tip chipping prevented by double-angle point. No tip breakage as compared with the conventional center drill. Excellent sharpness in the strong twist design.

    ab
    6.20€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Super Hard, Center Drill, B-Shaped, ALD Coating

    Super Hard, Center Drill, B-Shaped, ALD Coating

    IWATA TOOL

    Improve the toughness of various machining suitable carbide material and reduces breakage problems due to shape optimization. Allows high-speed machining and longer tool life.

    ab
    74.62€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Strong Helix Groove JIS R-Shaped Center Hole Drill CEIR

    Strong Helix Groove JIS R-Shaped Center Hole Drill CEIR

    YAMAWA MFG

    Suited for Center Hole Drilling in Soft and/or Sticky Materials

    • Mengenrabatt
    ab
    5.52€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Straight Shank, Countersink, HSS, DLC Coated, 90°

    Straight Shank, Countersink, HSS, DLC Coated, 90°

    ILIX

    Suitable for chamfering, countersinking, and deburring. Both machine and manual operations accepted. For difficult-to-cut materials and SUS. For Aluminum

    ab
    38.60€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • E-HSS Center Drill B Model

    E-HSS Center Drill B Model

    IWATA TOOL

    A center drill with high sharpness and excellent durability. Provides a combination of sharpness and breakage resistance by combining the use of cobalt high speed steel, increased tool accuracy, and optimization of its shape.

    ab
    15.11€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • HSS, SP Center, 90°, Long Type, TICN Coating

    HSS, SP Center, 90°, Long Type, TICN Coating

    IWATA TOOL

    Cutting edge is not lacking due to long service life. The tip chipping prevented by double-angle point. No tip breakage as compared with the conventional center drill. Excellent sharpness in the strong twist design.

    ab
    27.12€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Center Drill / TIALN KCDA-60

    Carbide Center Drill / TIALN KCDA-60

    KYOWA SEIKO

    Helix angle 30 ° at both the tip diameter and the wide diameter. Reduces burring and allows high efficiency machining.

    • Mengenrabatt
    ab
    59.43€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 3-Flute Chamfering Cutter 3MC (SKH51)
    ab
    32.58€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Pointing Drill Tips 90°, for Steel Material, 3 mm Shank (TIALN Coating)

    Pointing Drill Tips 90°, for Steel Material, 3 mm Shank (TIALN Coating)

    ATOM

    Drill especially for machining guide holes of ultra fine holes. Suitable for machining and positioning holes with high precision. TIALN coating improves abrasion resistance, allowing long lived machining work. Additional Small Diameter Sizes: φ 0.03 ~ φ 0.3 at 0.01 mm Intervals

    ab
    43.18€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

  • Use

  • Point Angle(θ)

    • 0 – 90
    • 15
    • 20
    • 25
    • 30
    • 35
    • 40
    • 45
    • 45°
    • 50
    • 55
    • 60
    • 60 x 120
    • 60°
    • 65
    • 70
    • 75
    • 90
    • 90°
    • 118
    • 120
    • 120°
    • 125°
    • 130
    [60-160/1]
  • Tool Diameter (D)(mm)

    • 0.03
    • 0.04
    • 0.05
    • 0.06
    • 0.07
    • 0.08
    • 0.09
    • 0.1
    • 0.11
    • 0.12
    • 0.13
    • 0.14
    • 0.15
    • 0.16
    • 0.17
    • 0.18
    • 0.19
    • 0.2
    • 0.21
    • 0.22
    • 0.23
    • 0.24
    • 0.25
    • 0.26
    • 0.27
    • 0.28
    • 0.29
    • 0.3
    • 0.35
    • 0.4
    • 0.45
    • 0.45 – 2.1
    • 0.45 – 2.7
    • 0.5
    • 0.55
    • 0.6
    • 0.63
    • 0.65
    • 0.65 – 2.1
    • 0.65 – 2.7
    • 0.7
    • 0.75
    • 0.8
    • 0.85
    • 0.9
    • 0.95
    • 1
    • 1 – 2.12
    • 1 – 2.5
    • 1 – 6
    • 1/16
    • 1/32
    • 1/64
    • 1/8
    • 1.1
    • 1.2
    • 1.25
    • 1.25 – 2.65
    • 1.3
    • 1.4
    • 1.5
    • 1.5 – 4
    • 1.6
    • 1.6 – 3.35
    • 1.7
    • 1.8
    • 1.9
    • 2
    • 2 – 10
    • 2 – 13
    • 2 – 4.25
    • 2 – 5
    • 2.1
    • 2.2
    • 2.3
    • 2.4
    • 2.5
    • 2.5 – 5.3
    • 2.5 – 6.5
    • 2.6
    • 2.7
    • 2.8
    • 2.9
    • 3
    • 3 – 14
    • 3 – 15
    • 3 – 22
    • 3 – 6
    • 3 – 8
    • 3/16
    • 3/32
    • 3/64
    • 3.1
    • 3.15
    • 3.15 – 6.7
    • 3.2
    • 3.3
    • 3.4
    • 3.5
    • 3.6
    • 3.7
    • 3.8
    • 3.9
    • 4
    • 4 – 10
    • 4 – 8.5
    • 4.2
    • 4.3
    • 4.4
    • 4.5
    • 4.6
    • 4.8
    • 5
    • 5 – 10.6
    • 5 – 12
    • 5/16
    • 5/32
    • 5/64
    • 5.1
    • 5.2
    • 5.3
    • 5.4
    • 5.5
    • 5.6
    • 5.8
    • 6
    • 6 – 15
    • 6.2
    • 6.3
    • 6.3 – 13.2
    • 6.3,8.3,10.4,12.4,16.5,20.5
    • 6.3/8.3/10.4/12.4/16.5/20.5
    • 6.4
    • 6.5
    • 6.6
    • 6.8
    • 7
    • 7.2
    • 7.3
    • 7.4
    • 7.5
    • 7.6
    • 7.7
    • 7.8
    • 8
    • 8 – 17
    • 8.2
    • 8.3
    • 8.4
    • 8.8
    • 9
    • 9.1
    • 9.4
    • 9.5
    • 10
    • 10 – 21.2
    • 10.1
    • 10.3
    • 10.4
    • 10.5
    • 10.8
    • 11
    • 11.1
    • 11.2
    • 11.4
    • 11.5
    • 11.88
    • 12
    • 12.1
    • 12.3
    • 12.4
    • 12.5
    • 13
    • 13.4
    • 13.5
    • 14
    • 14.2
    • 14.4
    • 14.5
    • 14.6
    • 15
    • 15.1
    • 15.2
    • 15.4
    • 15.5
    • 15.6
    • 16
    • 16.15
    • 16.3
    • 16.5
    • 16.5,20.5,25.0,37.0
    • 17
    • 17.1
    • 17.7
    • 18
    • 18.2
    • 18.5
    • 18.6
    • 19
    • 19.5
    • 20
    • 20.5
    • 21
    • 21.5
    • 21.77
    • 22
    • 22.3
    • 22.4
    • 22.5
    • 23
    • 23.4
    • 23.5
    • 24
    • 24.5
    • 25
    • 25.2
    • 25.3
    • 26
    • 26.5
    • 26.6
    • 27
    • 27.5
    • 28
    • 28.5
    • 29
    • 29.9
    • 30
    • 30.2
    • 30.5
    • 31
    • 31.5
    • 31.7
    • 31.9
    • 32
    • 32.6
    • 32.7
    • 33
    • 33.1
    • 33.3
    • 34
    • 34.1
    • 34.8
    • 34.9
    • 35
    • 35.4
    • 35.5
    • 36
    • 36.9
    • 37
    • 37.1
    • 37.9
    • 38
    • 39
    • 39.83
    • 40
    • 41
    • 42
    • 43
    • 45
    • 46
    • 47
    • 48
    • 49
    • 49.85 – 134.6
    • 50
    • 50.7
    • 51
    • 52
    • 52.8
    • 53
    • 53.6
    • 53.91
    • 54
    • 55
    • 56
    • 56.8
    • 57
    • 58
    • 58.2
    • 60
    • 61.4
    • 62
    • 62.2
    • 63
    • 64
    • 64.6
    • 66
    • 67.94
    • 69.2
    • 69.8
    • 70
    • 71.8
    • 72
    • 73.3
    • 74
    • 75
    • 75.5
    • 76
    • 80
    • 100
  • Work Material

  • Single Blade / Double Blade

  • Peripheral Blade Availability

  • Tool Material Type

  • Coating Presence

  • Coating Type

  • R Size ( R )(mm)

    • 0.1
    • 0.15
    • 0.2
    • 0.25
    • 0.3
    • 0.35
    • 0.4
    • 0.45
    • 0.5
    • 0.5 – 5
    • 0.5/1/1.5/2
    • 0.55
    • 0.6
    • 0.65
    • 0.7
    • 0.75
    • 0.8
    • 0.85
    • 0.9
    • 0.95
    • 1
    • 1 – 3
    • 1 – 4
    • 1 – 5
    • 1/2/3/4
    • 1RM
    • 1RY
    • 1.05
    • 1.1
    • 1.15
    • 1.2
    • 1.25
    • 1.3
    • 1.35
    • 1.4
    • 1.45
    • 1.5
    • 1.55
    • 1.6
    • 1.65
    • 1.7
    • 1.75
    • 1.8
    • 1.85
    • 1.9
    • 1.95
    • 2
    • 2RM
    • 2RY
    • 2.05
    • 2.1
    • 2.15
    • 2.2
    • 2.25
    • 2.3
    • 2.35
    • 2.4
    • 2.45
    • 2.5
    • 2.6
    • 2.7
    • 2.75
    • 2.8
    • 2.9
    • 3
    • 3RM
    • 3RY
    • 3.25
    • 3.5
    • 3.75
    • 4
    • 4RM
    • 4RY
    • 4.25
    • 4.5
    • 4.75
    • 5
    • 5 – 10
    • 5RM
    • 5.25
    • 5.5
    • 5.75
    • 6
    • 6.25
    • 6.5
    • 6.75
    • 7
    • 7.25
    • 7.5
    • 7.75
    • 8
    • 8.25
    • 8.5
    • 8.75
    • 9
    • 9.5
    • 10
    • 10.5
    • 11
    • 11 – 15
    • 11.5
    • 12
    • 12.5
    • 13
    • 13.5
    • 14
    • 14.5
    • 15
    • 15.5
    • 16
    • 16 – 20
    • 16.5
    • 17
    • 17.5
    • 18
    • 18.5
    • 19
    • 19.5
    • 20
    • 20.5
    • 21
    • 21.5
    • 22
    • 22.5
    • 23
    • 23.5
    • 24
    • 24.5
    • 25
    • 25.5
    • 26
    • 26.5
    • 27
    • 27.5
    • 28
    • 28.5
    • 29
    • 29.5
    • 30
    • XRM
    • XRY

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen