• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Fasen, V-Nut

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 12 Tage oder weniger
  • TS coated carbide chamfer, V grooving end mill, 2-flute

    TS coated carbide chamfer, V grooving end mill, 2-flute

    MISUMI

    Standard Chamfering and V Grooving Type

    • Mengenrabatt
    • TS
    • General Steel
    • 2 Flutes
    ab
    45.46€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TS coated carbide chamfering end mill, 2-flute / short model

    TS coated carbide chamfering end mill, 2-flute / short model

    MISUMI

    Helix Chamfer Type of the Popular Product

    • Mengenrabatt
    • TS
    • General Steel
    • 2 Flutes
    • S (Short)
    ab
    31.56€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TS coated carbide inner R-cutter, 2-flute

    TS coated carbide inner R-cutter, 2-flute

    MISUMI

    Achieves the easy and high-quality processing of corner R. TS coated type that can be selected from 29 sizes

    • Mengenrabatt
    • TS
    • General Steel
    • 2 Flutes
    ab
    31.20€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

    TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

    MISUMI

    The chamfer angle can be selected from 60, 90 and 120°according to the machining style

    • Mengenrabatt
    • TiCN
    • 2 Flutes
    • S (Short)
    ab
    35.44€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide inner R-cutter, 2-flute

    Carbide inner R-cutter, 2-flute

    MISUMI

    Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes

    • Mengenrabatt
    • Non-Coated
    • General Steel
    • 2 Flutes
    ab
    37.99€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Center Reamers

    Center Reamers

    FUKUDA

    Reamers for center hole finishing or chamfering. Edges of odd number reduce chatter.

    ab
    16.99€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Chamfering Cutter Type Ⅱ (1 Flutes) Straight Shank

    Chamfering Cutter Type Ⅱ (1 Flutes) Straight Shank

    OKAZAKI SEIKO

    1-flute type. For steel and stainless steel. All products are TIN coated.

    ab
    38.78€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TS Coated Carbide Chamfering End Mill, for High-Hardness Steel Machining, 6-Flute / Short Model

    TS Coated Carbide Chamfering End Mill, for High-Hardness Steel Machining, 6-Flute / Short Model

    MISUMI

    The popular high-hardness steel chamfer is even more affordable

    • Mengenrabatt
    • TS
    • High-Hardness Steel
    • Multi-Flutes (5 ~)
    • S (Short)
    ab
    39.66€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Leading Drills, TIN-NC-LDS

    Leading Drills, TIN-NC-LDS

    OSG

    TiN Coating Makes Possible Higher Speed and Longer Life than NC-LDS

    • Mengenrabatt
    ab
    13.07€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Chamfering Cutter Type Ⅰ (Hole Open Type) Straight Shank

    Chamfering Cutter Type Ⅰ (Hole Open Type) Straight Shank

    OKAZAKI SEIKO

    Hole drilling type. For non-ferrous metals. All products are TIN coated.

    ab
    16.10€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • High-Speed Steel Chamfering End Mill, 2-Flute / Short

    High-Speed Steel Chamfering End Mill, 2-Flute / Short

    MISUMI

    Chamfering end mill with the angle that can be freely selected in 1° increments

    • Non-Coated
    • 2 Flutes
    • S (Short)
    Minimum Lieferzeit
    5 Arbeitstage
  • New Chamfering Drill

    New Chamfering Drill

    NT TOOL

    For Working Non-Sticky Material

    ab
    27.32€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TS coated carbide chamfering end mill, 3-flute / short model

    TS coated carbide chamfering end mill, 3-flute / short model

    MISUMI

    3-flute type of the popular helix chamfer that's capable of high feed

    • Mengenrabatt
    • TS
    • General Steel
    • 3 Flutes
    • S (Short)
    ab
    48.82€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Chatter-less Chamfering Counterbores

    Chatter-less Chamfering Counterbores

    FUKUDA

    6 flutes improve cutting force, excellent chatter-free sharpness, side milling is also possible, and a great reduction in unpleasant metallic sounds during processing.

    ab
    21.16€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Center Chamfering Mills

    Center Chamfering Mills

    FUKUDA

    Five different machining, centering, chamfering, side surface machining, drilling, V grooving are all done in series with only one tool.

    ab
    40.44€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Chamfering Cutter KMC-2

    Carbide Chamfering Cutter KMC-2

    KYOWA SEIKO

    Optimal for chamfering and V-grooving.

    • Mengenrabatt
    ab
    33.17€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Chamfering Cutter Type Ⅲ (3 Flutes) Straight Shank

    Chamfering Cutter Type Ⅲ (3 Flutes) Straight Shank

    OKAZAKI SEIKO

    3-flute type. For steel and stainless steel. All products are TIN coated.

    ab
    40.14€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Corner Rounding End Mill

    Corner Rounding End Mill

    FUKUDA

    End mill for R chamfering.

    ab
    50.74€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

    TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

    MISUMI

    The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

    • Mengenrabatt
    • TS
    • SUS
    • 2 Flutes
    ab
    41.18€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Chamfering Drills

    Chamfering Drills

    NT TOOL

    For Working Non-Sticky Material

    ab
    14.38€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TOGLON Sharp SP 90° Super Hard
    ab
    45.44€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Chamfering End Mill for Aluminum Machining, 2-Flute

    Carbide Chamfering End Mill for Aluminum Machining, 2-Flute

    MISUMI

    The sharp helix blade achieves the clean machined surface with less burr

    • Mengenrabatt
    • Non-Coated
    • Aluminum
    • 2 Flutes
    ab
    42.08€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TS Coated Carbide Inner R-Cutter, for High-Hardness Steel Machining, 4-Flute / Short Model

    TS Coated Carbide Inner R-Cutter, for High-Hardness Steel Machining, 4-Flute / Short Model

    MISUMI

    MISUMI's original inner R cutter that specializes in high hardness steel machining

    • Mengenrabatt
    • TS
    • High-Hardness Steel
    • 4 Flutes
    • S (Short)
    ab
    48.06€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

    TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

    MISUMI

    Ideal for the Deep Chamfering of Workpieces

    • Mengenrabatt
    • TS
    • General Steel
    • 2 Flutes
    ab
    51.58€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Leading Drills, NC-LDS

    Leading Drills, NC-LDS

    OSG

    Available tip angles are 90° (45° chamfer), 120°, and 130° (EX GOLD drill centering for slope / curved surfaces).

    • Mengenrabatt
    ab
    9.11€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Solid Chamfering Cutters 3-Flute / OK-Coated

    Solid Chamfering Cutters 3-Flute / OK-Coated

    OKAZAKI SEIKO

    Employs blade edge dedicated to chamfering, enabling high speed chamfering with reduced burr.

    ab
    44.26€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Solid V Point Mills VSE VSESS Type

    Solid V Point Mills VSE VSESS Type

    DIJET

    Excellent tool abrasion resistance.

    ab
    55.02€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral

    Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral

    MISUMI

    Capable of everything from positioning to chamfering in a single shot

    • Mengenrabatt
    • Non-Coated
    • Aluminum
    • 2 Flutes
    ab
    42.85€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • External Chamfering Cutter (Nice Guy) NGC (SKH51)
    ab
    115.50€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Reverse Chamfering Cutter KUMW-4

    Carbide Reverse Chamfering Cutter KUMW-4

    KYOWA SEIKO

    Four straight flutes. 90°(Dual Angle Type)

    • Mengenrabatt
    ab
    83.42€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide 3 Flute Chamfering End Mill

    Carbide 3 Flute Chamfering End Mill

    DIXI

    Performs high-quality chamfering, high rigidity, high accuracy positioning determined by the structure of a small chisel, accurate positioning at the slopes and curved surfaces.

    ab
    42.83€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • CMC Chamfering Cutter For MC G2

    CMC Chamfering Cutter For MC G2

    ASAHI TOOLS

    Rows Shape / Double-sided Tolerance ±15 / Straight Flute for Maintaining Shape Accuracy

    ab
    98.83€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Leading Drills, VP-LDS

    Leading Drills, VP-LDS

    OSG

    V coating enables longer lasting life than TIN-NC-LDS

    • Mengenrabatt
    ab
    16.91€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Chamfer Mill OK Coated

    Chamfer Mill OK Coated

    OKAZAKI SEIKO

    In addition to chamfering of holes, it can also do V shaped grooving, and side feeding cutting like c-surface machining.

    ab
    70.35€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Center Reamers (Tapered Shank)

    Center Reamers (Tapered Shank)

    FUKUDA

    Reamers for center hole finishing or chamfering. Edges of odd number reduce chatter.

    ab
    136.50€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Leading Drills, FX-LDS

    Leading Drills, FX-LDS

    OSG

    Provides high speed and long tool life in centering as well as chamfering.

    • Mengenrabatt
    ab
    53.01€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hole Chamfering Leading Drill V Coating Powder HSS Long Shank

    Hole Chamfering Leading Drill V Coating Powder HSS Long Shank

    OSG

    Point Angle of 90°Allows Chamfering of Deep Sections of the Pocket

    • Mengenrabatt
    ab
    23.64€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 3-Flute, Chamfering Cutter (Positive Type) HSCT-P

    3-Flute, Chamfering Cutter (Positive Type) HSCT-P

    OSG

    Positive type.

    • Mengenrabatt
    ab
    73.17€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TOGLON Hard SP 90° ALD Coating

    TOGLON Hard SP 90° ALD Coating

    IWATA TOOL

    Displays performance far beyond existing models and is capable of handling hardened steel, die steel, kovar, hastelloy, etc. Strong twist shape helps achieve maximum surface roughness. 3 blade design and a long cutting blade provides incredibly long product life.

    ab
    67.47€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Mini Corner R Cutters MCRC (SKH56)
    ab
    66.22€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Pinko

    Pinko

    FUJIGEN

    Sharp blade tip form makes it particularly effective for detailed sculpting work.

    ab
    66.19€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TS coated carbide chamfering end mill, 2-flute / 15° spiral

    TS coated carbide chamfering end mill, 2-flute / 15° spiral

    MISUMI

    Capable of everything from positioning to chamfering with a single unit

    • Mengenrabatt
    • TS
    • General Steel
    • 2 Flutes
    ab
    56.49€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Electro-Deposition Router ED-EM
    ab
    33.77€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hex Axis Chamfering Cutter

    Hex Axis Chamfering Cutter

    H & H

    For pipe chamfering and countersink when wooden screw clamp attached. Can be also used for wood, noble metals such as aluminum and copper, non-quenched mild steel

    ab
    5.34€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Chamfering Cutter Type Ⅱ (1 Flutes) Taper Shank

    Chamfering Cutter Type Ⅱ (1 Flutes) Taper Shank

    OKAZAKI SEIKO

    1-flute type. For steel and stainless steel. All products are TIN coated.

    ab
    75.84€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen