• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Faswerkzeuge mit Wechselklinge / Spitze / Klinge

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 7 Tage oder weniger
  • 9 Tage oder weniger
  • Mentrube

    Mentrube

    FUJIGEN

    Exceptional cutting ability using high speed steel chip with breaker. Lineup of 30°45°60°.

    ab
    91.25€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • For Mentor Be Chip TM 32 GSR - HSS

    For Mentor Be Chip TM 32 GSR - HSS

    FUJIGEN

    It is a chip of material, high-speed steel.

    ab
    20.98€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • High Speed Coated Throw-Away Bits for Center Boy

    High Speed Coated Throw-Away Bits for Center Boy [1-5 Stk. pro Packung]

    BIG DAISHOWA SEIKI

    [Features] Excellent sharpness thanks to a cutting edge providing a precision finish. Since the cutting edge is a throw-away type which is exchangeable, it will always deliver a consistent performance without regrinding.

    ab
    105.84€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • NC Spot Drill for 90°

    NC Spot Drill for 90°

    Nine9

    Carbide insert type NC spot drill. High efficiency. Low cost. For CNC lathe, CNC lathe, machining center

    ab
    100.67€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Center Buoy

    Center Buoy

    BIG DAISHOWA SEIKI

    Accurately positions the drill hole and chamfers at the same time. High-precision throw-away bits with outstanding cutting sharpness. Eliminates the need for bit grinding. Long shank reduces interference with the workpiece.

    ab
    104.41€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • R Bit

    R Bit

    FUJIGEN

    Replacement tips enable various types of radius chamfering.

    ab
    183.33€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Chamfer Cutter

    Chamfer Cutter

    FUJIGEN

    Can select angles from 15° to 75°depending on application. Large variety of chips make it suitable for a wide range of worked material.

    ab
    239.00€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Insert for R Special / R Special Jr. / R Bit / RyanmenCut-R (RR25-48N) / Nice Corner VR

    Insert for R Special / R Special Jr. / R Bit / RyanmenCut-R (RR25-48N) / Nice Corner VR

    FUJIGEN

    It is a chip of material, cermet / Carbide K10 types / fine carbide.

    ab
    22.60€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • C Cutter Mini Surface / Back Surface, 1-Flute Type

    C Cutter Mini Surface / Back Surface, 1-Flute Type

    BIG DAISHOWA SEIKI

    A high performance front/back chamfering single-blade edge cutter "C Cuter Mini" that achieves super high feed thanks to a focus on miniaturization. Ultra high feed machining greatly reduces the time needed for chamfering. Supports a Wide Range of Applications Including Surface Chamfering, Rear Surface Chamfering and Face Milling

    ab
    102.40€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Spot Drill Insert

    Spot Drill Insert

    Nine9

    Insert for NC spot drill holders.

    ab
    31.49€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Value Starter Set

    Value Starter Set

    Nine9

    A single tip can be used for counterboring, chamfering, V groove processing, and engraving.

    ab
    131.67€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • C Cutter Mini Surface / Back Surface, Multiblade Type

    C Cutter Mini Surface / Back Surface, Multiblade Type

    BIG DAISHOWA SEIKI

    A high performance front/back chamfering multi-blade cutter "C Cuter Mini" that achieves super high feed thanks to a focus on miniaturization. Ultra high feed machining greatly reduces the time needed for chamfering. Supports a Wide Range of Applications Including Surface Chamfering, Rear Surface Chamfering and Face Milling

    ab
    139.45€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Momimen

    Momimen

    FUJIGEN

    Allows for momitsuke / C chamfering, and increases productivity in seal quantity of through change ATC. Dedicated tip has an unique shape, eliminating the danger of vibrations and damage.

    ab
    105.17€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • C Cutter Buoy

    C Cutter Buoy

    BIG DAISHOWA SEIKI

    [Features] Ideal for chamfering work using a tabletop drilling machine. Clean chamfering can be done using carbide throw-away tips. The carbide guide prevents chattering to allow work to be carried out easily by anyone.

    ab
    170.43€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • R Cutter Throw-Away Insert

    R Cutter Throw-Away Insert

    BIG DAISHOWA SEIKI

    4 Corners Can Be Used

    ab
    39.93€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Tips for Momimen / Screens, C32GUX

    Tips for Momimen / Screens, C32GUX

    FUJIGEN

    Material, cermet / Carbide K10 types / Carbide M20 types / fine carbide / HSS chip.

    ab
    18.27€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Engraving Cutter Insert

    Engraving Cutter Insert

    Nine9

    Special insert design achieves super long product life.

    ab
    37.50€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • C Cutter Mini Throwaway Tip

    C Cutter Mini Throwaway Tip

    BIG DAISHOWA SEIKI

    Throw Away Chip for High Performance Surface Chamfering Cutter "C Cutter Mini" That Achieves Super High Speed Feed Thanks to Miniaturization

    ab
    15.10€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Engraving Cutter for 45°

    Engraving Cutter for 45°

    Nine9

    It is an engraving tool of Innovative new concept carbide insert type. High quality engraving of most raw materials is possible.

    ab
    100.78€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • NC Spott Drill for 90° / Engraving Cutter

    NC Spott Drill for 90° / Engraving Cutter

    Nine9

    A carbide insert type of NC spot drill. High Efficiency! Low Cost! Ideal for CNC lathes and machining centers. Engraved cutter insert is also used.

    ab
    85.58€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • R Cutter for Front / Back R Chamfering

    R Cutter for Front / Back R Chamfering

    BIG DAISHOWA SEIKI

    Automates round chamfering. Able to handle front and back chamfering. 4 Blades for Greatly Improved Efficiency

    ab
    159.48€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • C Cutter Straight Shank

    C Cutter Straight Shank

    BIG DAISHOWA SEIKI

    [Features] Chamfering Tools Collected as Wide Range of C Cutters Inserts Specifically Designed for Chamfering with Large Rake Angles for a Beautiful Chamfered Result Wide Machining Range Can Reduce Number of Tools in the Magazine, and Very Effective in Improving ATC Lost Time

    ab
    113.51€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Tips for Dekamomi T32GUX

    Tips for Dekamomi T32GUX

    FUJIGEN

    Material, cermet / Carbide K10 types / Carbide M20 types / HSS chip.

    ab
    19.14€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Uratorimen-C

    Uratorimen-C

    FUJIGEN

    Back surface machining specialized tool.

    ab
    125.50€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Engraving Cutter for 60°

    Engraving Cutter for 60°

    Nine9

    It is an engraving tool of Innovative new concept carbide insert type. High quality engraving of most raw materials is possible.

    ab
    100.67€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Throwaway Tip for C Cutter Boy

    Throwaway Tip for C Cutter Boy

    BIG DAISHOWA SEIKI

    [Features] Economical Long-Life Using a Carbide Chip with 3 Usable Corners

    ab
    18.52€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Tips for Chibimomi, C22GUX

    Tips for Chibimomi, C22GUX

    FUJIGEN

    It is a chip of material, Carbide K10 types / fine carbide.

    ab
    16.15€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Tips for Mentrube, TM32GUR-HSS

    Tips for Mentrube, TM32GUR-HSS

    FUJIGEN

    It is a chip of material, high-speed steel.

    ab
    21.03€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • C Cutter Mini Surface Chamfering, 1-Flute Tip

    C Cutter Mini Surface Chamfering, 1-Flute Tip

    BIG DAISHOWA SEIKI

    A high performance front chamfering single-blade edge cutter "C Cuter Mini" that achieves super high feed thanks to a focus on miniaturization. Ultra high feed machining greatly reduces the time needed for chamfering. Supports a Wide Range of Applications Including Surface Chamfering, Rear Surface Chamfering and Face Milling

    ab
    102.40€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Surface

    Surface

    FUJIGEN

    Small-diameter type corresponding to the small processing diameter than conventional chamfer cutter. According to the application, you can choose 15 ° ~ 75 °. Material of chip is rich, it will adapt to the processing of a variety of work materials.

    ab
    122.92€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Insert for R Nouveau / R Nouveau Jr.

    Insert for R Nouveau / R Nouveau Jr.

    FUJIGEN

    It is a chip of material, Carbide K20 types.

    ab
    32.99€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • C Cutter Mini Pilot Hole & Bolt Hole Type

    C Cutter Mini Pilot Hole & Bolt Hole Type

    BIG DAISHOWA SEIKI

    A high performance front/back chamfering +cutter "C Cuter Mini" that achieves super high feed thanks to a focus on miniaturization. Tap pilot hole & bolt hole type. Ultra high feed machining greatly reduces the time needed for chamfering. Supports a Wide Range of Applications Including Surface Chamfering, Rear Surface Chamfering and Face Milling

    ab
    176.50€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Momimen NANO

    Momimen NANO

    FUJIGEN

    Among the smallest in the industry. Can avoid the interference from vices, clamps, etc. Can work locations that could not be accessed before.

    ab
    95.83€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Young Men

    Young Men

    FUJIGEN

    C15 C chamfering 1 time leaves a good finish without any chatter.

    ab
    247.08€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Double Surface Cut / R (RR16-30S / RR25-40S) / Tips for Mini R

    Double Surface Cut / R (RR16-30S / RR25-40S) / Tips for Mini R

    FUJIGEN

    It is a chip of material, Carbide K20 types.

    ab
    22.36€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • S32MOZ Insert S32GUR

    S32MOZ Insert S32GUR

    FUJIGEN

    It is a chip of material, cermet / Carbide K10 types / fine carbide.

    ab
    11.34€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Inserts for Chamfering Cutter / RC End Cutter / Baitender TT32GUR

    Inserts for Chamfering Cutter / RC End Cutter / Baitender TT32GUR

    FUJIGEN

    Material, cermet / Carbide K10 types / Carbide M20 types / fine carbide / HSS chip.

    ab
    15.68€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • For Gentlemen, Insert, X63GUR

    For Gentlemen, Insert, X63GUR

    FUJIGEN

    It is a chip of material, Carbide K10 types / Carbide M20 types / fine carbide.

    ab
    44.23€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • NC Spot Drill for 60°

    NC Spot Drill for 60°

    Nine9

    A carbide insert type of NC spot drill. High Efficiency! Low Cost! For Use with CNC Lathes, CNC Combined Lathe, Machining Centers

    ab
    111.58€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Chibimomi

    Chibimomi

    FUJIGEN

    Allows for momitsuke / C chamfering, and increases productivity in seal quantity of through change ATC. Dedicated tip has an unique shape, eliminating the danger of vibrations and damage.

    ab
    98.83€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Tips for Chibieco / Chibieco 2, TXMT080206

    Tips for Chibieco / Chibieco 2, TXMT080206

    FUJIGEN

    It is a chip of material, fine carbide.

    ab
    18.27€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • S32MOZ Insert S32MOZ

    S32MOZ Insert S32MOZ

    FUJIGEN

    It is a chip of material, cermet / Carbide K10 types / Carbide M20 types / fine carbide.

    ab
    6.39€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Nice Corner Tips for V2

    Nice Corner Tips for V2

    FUJIGEN

    It is a chip of material, cermet / Carbide K20 types.

    ab
    18.74€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • NC Spot Drill for 90° / Corner Radius Cutter

    NC Spot Drill for 90° / Corner Radius Cutter

    Nine9

    A carbide insert type of NC spot drill. High Efficiency! Low Cost! Ideal for CNC lathes and machining centers. Processing of the corner R is also usable insert.

    ab
    96.75€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Dekamomi

    Dekamomi

    FUJIGEN

    Allows for momitsuke / C chamfering, and increases productivity in seal quantity of through change ATC. Dedicated tip has an unique shape, eliminating the danger of vibrations and damage.

    ab
    136.75€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

  • Use

  • Point Angle(θ)

    • 0 – 90
    • 15
    • 20
    • 25
    • 30
    • 35
    • 40
    • 45
    • 45°
    • 50
    • 55
    • 60
    • 60 x 120
    • 60°
    • 65
    • 70
    • 75
    • 90
    • 90°
    • 118
    • 120
    • 120°
    • 125°
    • 130
    [60-160/1]
  • Tool Diameter (D)(mm)

    • 0.03
    • 0.04
    • 0.05
    • 0.06
    • 0.07
    • 0.08
    • 0.09
    • 0.1
    • 0.11
    • 0.12
    • 0.13
    • 0.14
    • 0.15
    • 0.16
    • 0.17
    • 0.18
    • 0.19
    • 0.2
    • 0.21
    • 0.22
    • 0.23
    • 0.24
    • 0.25
    • 0.26
    • 0.27
    • 0.28
    • 0.29
    • 0.3
    • 0.35
    • 0.4
    • 0.45
    • 0.45 – 2.1
    • 0.45 – 2.7
    • 0.5
    • 0.55
    • 0.6
    • 0.63
    • 0.65
    • 0.65 – 2.1
    • 0.65 – 2.7
    • 0.7
    • 0.75
    • 0.8
    • 0.85
    • 0.9
    • 0.95
    • 1
    • 1 – 2.12
    • 1 – 2.5
    • 1 – 6
    • 1/16
    • 1/32
    • 1/64
    • 1/8
    • 1.1
    • 1.2
    • 1.25
    • 1.25 – 2.65
    • 1.3
    • 1.4
    • 1.5
    • 1.5 – 4
    • 1.6
    • 1.6 – 3.35
    • 1.7
    • 1.8
    • 1.9
    • 2
    • 2 – 10
    • 2 – 13
    • 2 – 4.25
    • 2 – 5
    • 2.1
    • 2.2
    • 2.3
    • 2.4
    • 2.5
    • 2.5 – 5.3
    • 2.5 – 6.5
    • 2.6
    • 2.7
    • 2.8
    • 2.9
    • 3
    • 3 – 14
    • 3 – 15
    • 3 – 22
    • 3 – 6
    • 3 – 8
    • 3/16
    • 3/32
    • 3/64
    • 3.1
    • 3.15
    • 3.15 – 6.7
    • 3.2
    • 3.3
    • 3.4
    • 3.5
    • 3.6
    • 3.7
    • 3.8
    • 3.9
    • 4
    • 4 – 10
    • 4 – 8.5
    • 4.2
    • 4.3
    • 4.4
    • 4.5
    • 4.6
    • 4.8
    • 5
    • 5 – 10.6
    • 5 – 12
    • 5/16
    • 5/32
    • 5/64
    • 5.1
    • 5.2
    • 5.3
    • 5.4
    • 5.5
    • 5.6
    • 5.8
    • 6
    • 6 – 15
    • 6.2
    • 6.3
    • 6.3 – 13.2
    • 6.3,8.3,10.4,12.4,16.5,20.5
    • 6.3/8.3/10.4/12.4/16.5/20.5
    • 6.4
    • 6.5
    • 6.6
    • 6.8
    • 7
    • 7.2
    • 7.3
    • 7.4
    • 7.5
    • 7.6
    • 7.7
    • 7.8
    • 8
    • 8 – 17
    • 8.2
    • 8.3
    • 8.4
    • 8.8
    • 9
    • 9.1
    • 9.4
    • 9.5
    • 10
    • 10 – 21.2
    • 10.1
    • 10.3
    • 10.4
    • 10.5
    • 10.8
    • 11
    • 11.1
    • 11.2
    • 11.4
    • 11.5
    • 11.88
    • 12
    • 12.1
    • 12.3
    • 12.4
    • 12.5
    • 13
    • 13.4
    • 13.5
    • 14
    • 14.2
    • 14.4
    • 14.5
    • 14.6
    • 15
    • 15.1
    • 15.2
    • 15.4
    • 15.5
    • 15.6
    • 16
    • 16.15
    • 16.3
    • 16.5
    • 16.5,20.5,25.0,37.0
    • 17
    • 17.1
    • 17.7
    • 18
    • 18.2
    • 18.5
    • 18.6
    • 19
    • 19.5
    • 20
    • 20.5
    • 21
    • 21.5
    • 21.77
    • 22
    • 22.3
    • 22.4
    • 22.5
    • 23
    • 23.4
    • 23.5
    • 24
    • 24.5
    • 25
    • 25.2
    • 25.3
    • 26
    • 26.5
    • 26.6
    • 27
    • 27.5
    • 28
    • 28.5
    • 29
    • 29.9
    • 30
    • 30.2
    • 30.5
    • 31
    • 31.5
    • 31.7
    • 31.9
    • 32
    • 32.6
    • 32.7
    • 33
    • 33.1
    • 33.3
    • 34
    • 34.1
    • 34.8
    • 34.9
    • 35
    • 35.4
    • 35.5
    • 36
    • 36.9
    • 37
    • 37.1
    • 37.9
    • 38
    • 39
    • 39.83
    • 40
    • 41
    • 42
    • 43
    • 45
    • 46
    • 47
    • 48
    • 49
    • 49.85 – 134.6
    • 50
    • 50.7
    • 51
    • 52
    • 52.8
    • 53
    • 53.6
    • 53.91
    • 54
    • 55
    • 56
    • 56.8
    • 57
    • 58
    • 58.2
    • 60
    • 61.4
    • 62
    • 62.2
    • 63
    • 64
    • 64.6
    • 66
    • 67.94
    • 69.2
    • 69.8
    • 70
    • 71.8
    • 72
    • 73.3
    • 74
    • 75
    • 75.5
    • 76
    • 80
    • 100
  • Work Material

  • Single Blade / Double Blade

  • Peripheral Blade Availability

  • Tool Material Type

  • Coating Presence

  • Coating Type

  • R Size ( R )(mm)

    • 0.1
    • 0.15
    • 0.2
    • 0.25
    • 0.3
    • 0.35
    • 0.4
    • 0.45
    • 0.5
    • 0.5 – 5
    • 0.5/1/1.5/2
    • 0.55
    • 0.6
    • 0.65
    • 0.7
    • 0.75
    • 0.8
    • 0.85
    • 0.9
    • 0.95
    • 1
    • 1 – 3
    • 1 – 4
    • 1 – 5
    • 1/2/3/4
    • 1RM
    • 1RY
    • 1.05
    • 1.1
    • 1.15
    • 1.2
    • 1.25
    • 1.3
    • 1.35
    • 1.4
    • 1.45
    • 1.5
    • 1.55
    • 1.6
    • 1.65
    • 1.7
    • 1.75
    • 1.8
    • 1.85
    • 1.9
    • 1.95
    • 2
    • 2RM
    • 2RY
    • 2.05
    • 2.1
    • 2.15
    • 2.2
    • 2.25
    • 2.3
    • 2.35
    • 2.4
    • 2.45
    • 2.5
    • 2.6
    • 2.7
    • 2.75
    • 2.8
    • 2.9
    • 3
    • 3RM
    • 3RY
    • 3.25
    • 3.5
    • 3.75
    • 4
    • 4RM
    • 4RY
    • 4.25
    • 4.5
    • 4.75
    • 5
    • 5 – 10
    • 5RM
    • 5.25
    • 5.5
    • 5.75
    • 6
    • 6.25
    • 6.5
    • 6.75
    • 7
    • 7.25
    • 7.5
    • 7.75
    • 8
    • 8.25
    • 8.5
    • 8.75
    • 9
    • 9.5
    • 10
    • 10.5
    • 11
    • 11 – 15
    • 11.5
    • 12
    • 12.5
    • 13
    • 13.5
    • 14
    • 14.5
    • 15
    • 15.5
    • 16
    • 16 – 20
    • 16.5
    • 17
    • 17.5
    • 18
    • 18.5
    • 19
    • 19.5
    • 20
    • 20.5
    • 21
    • 21.5
    • 22
    • 22.5
    • 23
    • 23.5
    • 24
    • 24.5
    • 25
    • 25.5
    • 26
    • 26.5
    • 27
    • 27.5
    • 28
    • 28.5
    • 29
    • 29.5
    • 30
    • XRM
    • XRY

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • MISUMI
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen