• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Kernbohrer (Spitze)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • Diamond Core Bits (for Diamond Core Machines)

    Diamond Core Bits (for Diamond Core Machines)

    HOUSE BM

    Single body thin bladed bit displays high perforation ability.

    ab
    99.83€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly-Click Series, Dry Type, Dry Mond Core Drills

    Poly-Click Series, Dry Type, Dry Mond Core Drills

    MIYANAGA

    Possible dry drilling of reinforced concrete. Cutter has a good chip discharging by the outer screw.

    ab
    38.46€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly-Click Series, Core Drills for ALC

    Poly-Click Series, Core Drills for ALC

    MIYANAGA

    Cutting edge and chip pocket balanced design enables ALC and rebar safely effortlessly cutting

    ab
    22.02€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Clean Dust Cover

    Clean Dust Cover

    HOUSE BM

    When working the cutting debris stays within the clean dust cover and does not fly off into the room, allowing ideal working conditions and keeping the working space clean.

    ab
    15.92€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Core Drills DC120F3

    Diamond Core Drills DC120F3

    HITACHI KOKI

    Effective in tight spaces and work on high locations. Internalized slip clutch to protect the gears.

    ab
    1,711.65€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Impact Core Drill (for Light Hammer Drills)

    Impact Core Drill (for Light Hammer Drills)

    HOUSE BM

    Speedy drilling is enabled due to structure of lightweight hammer drill which smoothly transfers power to the cutting edge. By adopting Quick Change Center Pin (32φ and more) guide plate performs necessary accurate positioning.

    ab
    40.39€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly-Click, Down Light Core Kits

    Poly-Click, Down Light Core Kits

    MIYANAGA

    Created a kit perfectly suited in size for drilling holes in the ceiling. Can be used by just replacing the cutter.

    ab
    362.58€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Multi-Function Core Drill UR21

    Multi-Function Core Drill UR21

    UNIKA

    A vibration use core drill that combines both precision and efficiency with a blade geometry well suited for using on hard wall materials. Basic model that comes in thin to large diameters. Applies a vibration and rotation to the blade tip, crushing the material while grinding it, allowing speedy hole drilling.

    ab
    4.62€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Dragon Diamond Core Drills (for Rotation)

    Dragon Diamond Core Drills (for Rotation)

    HOUSE BM

    [Characteristics] Can be used to open holes in steel reinforced concrete using a rotating drill. Chip discharge performance has been enhanced thanks to the thermal spray dragon groove on the outer periphery of the core body, and it is possible to quickly open holes. [Use] Steel Reinforced Concrete, Heavy Blocks, Hard Tiles, Hard Ceramic Siding

    ab
    89.50€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly-Click Series, Common Shanks

    Poly-Click Series, Common Shanks

    MIYANAGA

    Center drill bit and center pin that do not come with the shank need to be purchased separately.

    ab
    4.67€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Single-Function Core Drill E & S Dry Diamond

    Single-Function Core Drill E & S Dry Diamond

    UNIKA

    Can cut holes into reinforced concrete (up to 9mm rebar) without the use of water. Center pin configuration means it cuts with just torque, greatly reducing vibration noise. Uses shank for both 10 mm and 13 mm chucks regardless of drill chuck diameter.

    ab
    92.08€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Drill Bit for A Series ALC

    Drill Bit for A Series ALC

    REX INDUSTRIES

    With small-amplitude vibration and rotation to the cutting edge enables speedier drilling by crushing the material while cutting.

    ab
    79.30€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly-Click Series, Dust Collection Shanks

    Poly-Click Series, Dust Collection Shanks

    MIYANAGA

    With dust cover, even drilling in the ceiling is stress free.

    ab
    7.56€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Multi Universal Core Drills (for Both Rotation and Vibration)

    Multi Universal Core Drills (for Both Rotation and Vibration)

    HOUSE BM

    Newly developed multi-blade type allows hole drilling in materials ranging from siding (metal and ceramic), ALC (steel reinforced), deck plates, thin iron plates (1.2 mm and thinner), blocks, mortar, and lumber. Implementation of PAT.P wide chip makes for easy removal of machining debris.

    ab
    58.41€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly-Click Series, Wet Type, Wet Mond Core Drills

    Poly-Click Series, Wet Type, Wet Mond Core Drills

    MIYANAGA

    Cutting edge one-touch exchange, no-tools-required system. Sharpness that easily cuts rebar with rotational force only.

    ab
    25.58€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly-Click Series, Galvanized Wood Core Drills

    Poly-Click Series, Galvanized Wood Core Drills

    MIYANAGA

    In its own chip shape, improve the Chamfering of metal. Smooth discharge of chips by adoption of 2 stage blade.

    ab
    29.31€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Multi Core System Sets

    Multi Core System Sets

    HOUSE BM

    Box Set Convenient For Portability and Storage

    ab
    301.50€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Radione Down Light Core Drills (for Rotation)

    Radione Down Light Core Drills (for Rotation) [1-10 Stk. pro Packung]

    HOUSE BM

    Due to the clean dust cover, there is no dust coverage when drilling holes. (The clean dust cover cannot be used with the 200 mm size part.) Z axis spindle (SDS type) is fitted as standard. Supports straight type and SDS type electric power drills.

    ab
    192.08€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly-Click Series, Hybrid Core Drills

    Poly-Click Series, Hybrid Core Drills

    MIYANAGA

    By unique cutting edge shape, suitable for drilling composite materials, such as kitchen counter, system bus board. Suitable for drilling wood floor.

    ab
    13.55€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Rotation and Vibration Combined-Use Core Drill (Rotation / Vibration Combined-Use)

    Rotation and Vibration Combined-Use Core Drill (Rotation / Vibration Combined-Use)

    HOUSE BM

    Cutting edge for effectively making use of the impact and rotation strengths of the vibration drill. Allows smooth hole drilling by preventing cracks in the material surface. "Kuzu Tori Pon". center drill" features a non-screw locking mechanism for easy removal of cutting chips without the need for disassembly of the main core drill body.

    ab
    60.34€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Composite (High) Core Drill BOX Kit

    Composite (High) Core Drill BOX Kit

    MIYANAGA

    Miyanaga core drill BOX kit.

    ab
    371.67€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wet Diamond Core Drill (For Rotation)

    Wet Diamond Core Drill (For Rotation)

    HOUSE BM

    A simple, wet diamond core drill with a water tank (sponge for water tank) on the core drill cylinder portion. Wet hole drilling reinforced concrete with a hand drill is easy, with no need for cumbersome equipment. Z axis spindle (SDS type) fitted as standard. Supports straight type and SDS type electric power drills.

    ab
    157.92€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Core Drills DC120VA

    Diamond Core Drills DC120VA

    HITACHI KOKI

    Achieves fast wide range of drilling at a constant speed control + speed dial equipped.

    ab
    576.03€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly-Click Series, for Both Wet and Dry Types, Diamond Core Drills for Roofing

    Poly-Click Series, for Both Wet and Dry Types, Diamond Core Drills for Roofing

    MIYANAGA

    Can drill holes smoothly in tiles. Compatible with both dry and wet use. (Please use wet type for hard tiles)

    ab
    41.67€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly-Click Series, Core Drills for Vibration - S Core

    Poly-Click Series, Core Drills for Vibration - S Core

    MIYANAGA

    Cutting edge for effectively making use of the impact and rotation strengths of the vibration drill. Allows smooth hole drilling by preventing cracks in the material surface.

    ab
    19.79€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly-Click Series, Wooding Core Drills

    Poly-Click Series, Wooding Core Drills

    MIYANAGA

    By unique cutting edge shape, can be safely cut without bitten nails. Drilling also possible to wood-based ceiling material.

    ab
    26.22€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly-Click Series, Dry Type, Hyper Diamond Core Drills

    Poly-Click Series, Dry Type, Hyper Diamond Core Drills

    MIYANAGA

    Diamond abrasive grains coated to the cutting edge provides great cutting sharpness. Less caught on work surface assures safe operation. Cut various, different types of materials.

    ab
    9.82€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wet Diamond Core Drill DC Type

    Wet Diamond Core Drill DC Type

    UNIKA

    Can perforate reinforced concrete (up to 12mm rebar) due to lack of vibration, low noise, and low load. Incorporates one touch center pin format to make center positioning easy.

    ab
    10.29€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Single-Function Core Drill E & S For ALC

    Single-Function Core Drill E & S For ALC

    UNIKA

    Supports ALC characteristics. Achieve large diameter hole cutting in ALC plate difficult-to-cut materials. Piano wire with excellent rotational force, 2 minutes with ALC plate make it easy to cut. Exhibits a sharp hole cutting strength with extra hard blade tip and uses materials with high toughness and exceptional wear resistance.

    ab
    66.22€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Siding / Wood Core Drill (for Rotation)

    Siding / Wood Core Drill (for Rotation)

    HOUSE BM

    [Characteristics] With a blade design that focuses on speed boring of wood or siding materials, comfortable performance in rotating mode is made possible. Newly developed Radial One Shank system enables easy exchange with alternate sized core bodies. Includes both straight and SDS type shanks for attachment to both chuck type and SDS compact lightweight hammer drill. Boasts stable boring performance with its tip pocket balance that features an excellent chip discharge effect. (When boring deep holes, chip discharge is required for electric drill step work.) "Single-action dust removal. The "Kuzu Tori Pon! center drill" features a non-screw locking mechanism for easy removal of cutting chips without the need for disassembly of the main core drill body. [Use] Work material: siding (ceramic / metal), wood (mailing), etc.

    ab
    40.39€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hammer Core Drills (for Hammer Drills)

    Hammer Core Drills (for Hammer Drills)

    HOUSE BM

    Structure of the hammer drill smoothly relaying its power to the flute tip allows for speedy drilling.

    ab
    70.64€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Multi Double-Edged Core Drills (for Both Rotation and Vibration)

    Multi Double-Edged Core Drills (for Both Rotation and Vibration)

    HOUSE BM

    Newly developed multi-blade type allows hole drilling in materials ranging from siding (metal and ceramic), ALC (steel reinforced), deck plates, thin iron plates (1.2 mm and thinner), blocks, mortar, and lumber. A bargain double flute head for double the life span.

    ab
    87.38€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Single-Function Core Drill E & S For Vibration

    Single-Function Core Drill E & S For Vibration

    UNIKA

    With small-amplitude vibration and rotation to the cutting edge, the material is crushed while cutting. Perform speedy drilling operation From 22 to 220mm, rich aperture size rich lineup. Uses shank for both 10 mm and 13 mm chucks regardless of drill chuck diameter. SDS shank type has the same price.

    ab
    66.22€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Core Drill Parts

    Core Drill Parts [1-6 Stk. pro Packung]

    HOUSE BM

    Core drill parts lineup that includes shanks and center pins.

    ab
    18.07€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Multi-Layer Core Drill (For Rotation)

    Multi-Layer Core Drill (For Rotation)

    HOUSE BM

    Multi-layered flute type that can drill through a variety of materials using rotation modes. Layer process enables protrusion array of large diamonds with less clogging, and sustains stable cutting ability and high durability. Performs smooth operation without the flute getting trapped. Center pin and center drill are equipped as standard. Positions with the material easily.

    ab
    84.00€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Core Drills (Straight Shank)

    Diamond Core Drills (Straight Shank)

    TRUSCO NAKAYAMA

    [Characteristics] Ideal for electrical, piping, or wiring. A hole saw shaped wet cutting tool with blades that feature electrodeposited diamonds. [Use] Work Material: Tile / Blocks / Bricks / Glass / Etc. Compatible equipment: electric drills with speed control function and a power consumption of 500 W or more (cannot be used with impact tools).

    ab
    24.22€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Z-Axis Pipe Core Drill (SDS Type, for Lightweight Hammer Drills)

    Z-Axis Pipe Core Drill (SDS Type, for Lightweight Hammer Drills)

    HOUSE BM

    Spiral groove with excellent chip powder discharge, speed up the perforation ability. Speedy drilling is enabled due to structure of lightweight hammer drill which smoothly transfers power to the cutting edge.

    ab
    90.00€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Radione Ventilation Core Drills (Multi-Layer)

    Radione Ventilation Core Drills (Multi-Layer)

    HOUSE BM

    Multi-layered flute type that can drill through a variety of materials using rotation modes. Performs safe operation without getting trapped. Allows for one-shot perforation of composite wall without touching the insulation. Layer process enables protrusion array of large diamonds with less clogging, and sustains stable cutting ability and high durability.

    ab
    360.00€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly-Click Series, Core Drills for FRP

    Poly-Click Series, Core Drills for FRP

    MIYANAGA

    Drill bits designed to produce excellent cutting sharpness cut and clear cut surfaces without roughening on reinforcing materials like glass fiber for construction.

    ab
    13.55€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly-Click Series, Composite Core Drills

    Poly-Click Series, Composite Core Drills

    MIYANAGA

    Allows a hand held electric drill to open holes in materials ranging from resin type artificial marble / FRP / composites to lumber. By adapting a marking blade, it allows clean hole making in fibrous materials.

    ab
    20.04€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly-Click Series, Dry Type, Dry Mond Core Drills for Blocks

    Poly-Click Series, Dry Type, Dry Mond Core Drills for Blocks

    MIYANAGA

    Performs drilling of dry block, weight and cosmetic block, extruded cement. Positioning ensured by carbide center pin.

    ab
    43.18€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly-Click Series, Core Drills for Vinyl Chloride Pipes

    Poly-Click Series, Core Drills for Vinyl Chloride Pipes

    MIYANAGA

    Cutting edge shape with an emphasis on sharpness that can perform high-speed drilling with rotary drill.

    ab
    14.64€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly-Click Series, Wet Type, Fan-Fan Core Kits

    Poly-Click Series, Wet Type, Fan-Fan Core Kits

    MIYANAGA

    Comes in kit size optimal for drilling of ventilation fan hole. At the touch of a button easily interchangeable desorption of the shank and the cutter.

    ab
    234.67€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • S-Lock Shank System

    S-Lock Shank System

    MIYANAGA

    Shank related product for S-lock.

    ab
    5.62€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Dragon ALC Core Drills (for Rotation)

    Dragon ALC Core Drills (for Rotation) [1-10 Stk. pro Packung]

    HOUSE BM

    [Characteristics] With a blade designed for use on ALC materials (with piano wire, reinforced steel), comfortable performance in rotating mode is made possible. Chip discharge performance has been enhanced thanks to the thermal spray dragon groove on the outer periphery of the core, and it is possible to quickly open holes even in damp ALC materials. Newly developed Radial One Shank system enables easy exchange with alternate sized core bodies. Includes both straight and SDS type shanks for attachment to both chuck type and SDS compact lightweight hammer drill. "Single-action dust removal. center drill" features a non-screw locking mechanism for easy removal of cutting chips without the need for disassembly of the main core drill body. Aluminum die-cast is used for the core bottom. (55φ or more) Lighter than traditional 257 for improved workability. [Application] Work Material: ALC Material (with Reinforced Steel), Gypsum Board.

    ab
    73.22€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen