• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Bohrer für Elektrobohrer

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 7 Tage oder weniger
  • 8 Tage oder weniger
  • Cobalt Masamune Drill

    Cobalt Masamune Drill [1-100 Stk. pro Packung]

    ISHIHASHI

    Chisel on the tip section has a sharp acute cutting edge (AQMS Standard) and displays excellent machining performance thanks to complete centripetal qualities and twice the standard bite speed.

    ab
    5.07€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Thin Axis Drill (Shank Type 13)

    Thin Axis Drill (Shank Type 13)

    TRUSCO NAKAYAMA

    [Characteristics] Because the shank section has a trihedral angle and is resistant to slipping. Does not require a punch due to the specialized thinning included on the edge. Can be used with all kinds of materials including steel sheets, angles, new construction materials, mortar, and wood and is ideal for work at factories, outdoors, or at construction sites. [Application] Work Material: Common Steel, Softwood.

    ab
    34.50€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hex Axis Cobalt HSS Steel Drill Bit Set (10 Pieces Set)

    Hex Axis Cobalt HSS Steel Drill Bit Set (10 Pieces Set) [10 Stk. pro Packung]

    CUSTOM KOBO

    Ideal for machining stainless steel and other hard-to-cut materials. Has good penetration and drills holes quickly. For rotary / rechargeable drills; Cut hard-to-cut materials, stainless steel, common steel, cast iron, and light metal.

    ab
    21.48€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hex Axis Ironworking Drill

    Hex Axis Ironworking Drill

    ONISHI MANUFACTURING

    [Characteristics] A hexagonal shaft ironworking drill for use with impact drills (12 V or more). [Application] Work Material: Common Steel, Aluminum, Wood, Acrylic Sheet. For opening holes in sheet iron or aluminum, etc.

    ab
    6.64€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Thin Axis Drill (Shank Type 10)

    Thin Axis Drill (Shank Type 10)

    TRUSCO NAKAYAMA

    [Characteristics] Because the shank section has a trihedral angle and is resistant to slipping. Does not require a punch due to the specialized thinning included on the edge. Can be used with all kinds of materials including steel sheets, angles, new construction materials, mortar, and wood and is ideal for work at factories, outdoors, or at construction sites. [Application] Work Material: Common Steel, Softwood.

    ab
    23.34€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Thin Axis Masamune Drill

    Thin Axis Masamune Drill

    ISHIHASHI

    By unique thinning, it has good punch unnecessary afferent, usually has more than 2 times the work faster and outstanding sharpness and durability.

    ab
    12.68€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hex Axis Masamune Drill

    Hex Axis Masamune Drill [1-10 Stk. pro Packung]

    ISHIHASHI

    Detachable with one touch to charge the driver. Adopted Masamune drilling to up the performance and operability by good Chamfering and outstanding sharpness.

    ab
    7.40€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Thin Axis Drill (Shank Type 6.5)

    Thin Axis Drill (Shank Type 6.5)

    TRUSCO NAKAYAMA

    [Characteristics] Because the shank section has a trihedral angle and is resistant to slipping. Does not require a punch due to the specialized thinning included on the edge. Can be used with all kinds of materials including steel sheets, angles, new construction materials, mortar, and wood and is ideal for work at factories, outdoors, or at construction sites. [Application] Work Material: Common Steel, Softwood.

    ab
    11.64€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hex Axis Cobalt Masamune Drill

    Hex Axis Cobalt Masamune Drill [1-8 Stk. pro Packung]

    ISHIHASHI

    Ideal for drilling stainless steel. Designed to provide superior cutting ability, superior bite, and exceptional cutting sharpness.

    ab
    8.80€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Short Size Cobalt HSS Steel Drill Blade Set (Set of 3)

    Short Size Cobalt HSS Steel Drill Blade Set (Set of 3) [3 Stk. pro Packung]

    CUSTOM KOBO

    Cross-thinning. (Over φ 3.0 mm) Outstanding bite. For use with electric drills for hard-to-cut material, stainless steel, general steel, cast iron and light metal.

    ab
    7.11€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Drill Sets 6076047

    Drill Sets 6076047

    RYOBI

    Composed of 13 pcs of driver drills and rechargeable driver drills.

    ab
    18.70€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Rivet Cutters

    Rivet Cutters [1-5 Stk. pro Packung]

    ISHIHASHI

    By the double special point of its own development, clean drilling is possible without back side burr and well cut.

    ab
    7.52€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hex Axis Ironworking Drill

    Hex Axis Ironworking Drill [1-10 Stk. pro Packung]

    TRUSCO NAKAYAMA

    [Characteristics] One-touch fitting to rechargeable impact drivers. Because the blade edge has undergone X-thinning, it is slip resistant and can be used to open holes accurately. [Use] Work Materials: Common Steel, Light Metal, Plastic, Wood, Steel, Aluminum, Woodwork, Acrylic Sheet.

    ab
    6.53€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Woodworking Drill Bit Set (6 Pieces Set)

    Woodworking Drill Bit Set (6 Pieces Set)

    CUSTOM KOBO

    Sharp tip solidly bites into worked material. Has excellent cutting ability. Wood / Plastic / Resin For Electric Drills, For Carpentry Use

    ab
    10.46€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Spot Cutter

    Spot Cutter

    ISHIHASHI

    By unique cross-section cutting edge shape, demonstrate the best sharpness and durability.

    ab
    15.47€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly-Click Series, Counter Sinking Cutters

    Poly-Click Series, Counter Sinking Cutters

    MIYANAGA

    Clean finish with carbide blade adoption.

    ab
    99.61€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • HSS Titanium Seal Coated Drill Blade Set (6 per Set)

    HSS Titanium Seal Coated Drill Blade Set (6 per Set) [6 Stk. pro Packung]

    CUSTOM KOBO

    Cross-thinning. (Over φ 3.0 mm) Outstanding bite. Smooth cutting. For Ironworking / Wood / Light Alloy / Synthetic Resin / Electric Drill / Ironworking / Woodworking

    ab
    12.25€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hex Axis Stainless Steel Drill

    Hex Axis Stainless Steel Drill

    ONISHI MANUFACTURING

    [Characteristics] A hexagonal shaft drill for stainless steel for use with impact drills (9.6 V or more). [Application] Work Material: Stainless Steel, Common Steel.

    ab
    9.03€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hex Axis Short Cobalt Drill

    Hex Axis Short Cobalt Drill

    TRAD

    [For DIY} Excellent Workability Thanks to its Short Size

    ab
    4.00€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Mist Diamond Option Parts

    Mist Diamond Option Parts

    MIYANAGA

    Hands-free water supply set and cutting powder extrusion rods are available.

    ab
    5.62€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hexagonal Drill Cutter

    Hexagonal Drill Cutter

    ONISHI MANUFACTURING

    [Characteristics] By combining with a middle-size drill and chamfering cutter, both pilot hole opening and 90 degree chamfering can be performed simultaneously with 1 drill. Because high-speed steel is used, drill wear is low allowing for it to be used longer. If the middle drill becomes worn, replacement can be performed easily using the included L-wrench. [Application] Work material: Iron working, wood working and aluminum. For pilot holes and chamfering in iron works, wood works or aluminum.

    ab
    6.27€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Musashi Twin Cutter

    Musashi Twin Cutter

    ISHIHASHI

    By the double special point of its own development, clean drilling is possible without back side burr and well cut.

    ab
    7.10€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hex Axis Woodworking Drill Bit Set (10 Pieces Set)

    Hex Axis Woodworking Drill Bit Set (10 Pieces Set)

    CUSTOM KOBO

    For drilling in wood, resin, etc Chuck and hexagonal mesh stability. Wood / Resin, Rotation / Charge Drill

    ab
    14.17€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hex Axis Combination Drill Bit Set (10 Pieces Set)

    Hex Axis Combination Drill Bit Set (10 Pieces Set) [10 Stk. pro Packung]

    CUSTOM KOBO

    Drills both concrete and iron. Has good penetration and drills holes quickly.

    ab
    14.57€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hex Axis HSS Steel Titanium Drill Bit Set (10 Pieces Set)

    Hex Axis HSS Steel Titanium Drill Bit Set (10 Pieces Set) [10 Stk. pro Packung]

    CUSTOM KOBO

    Performs neat and high accuracy tapping, Has good penetration and drills holes quickly. For rotation and charge drill, iron-wood and light alloy, synthetic resin

    ab
    17.49€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Charging Screwdriver Drill For Block / Mortar

    Charging Screwdriver Drill For Block / Mortar

    MIYANAGA

    With hexagonal axis shank (6.35mm), it can be mounted in one-touch directly to the charge impact driver. For integrated, frame less, with excellent durability.

    ab
    9.17€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Concrete Drill Blade Set (6 Pcs)

    Concrete Drill Blade Set (6 Pcs) [6 Stk. pro Packung]

    CUSTOM KOBO

    Has excellent cutting ability. Carbide inserts with an emphasis on durability. Block Brick Mortar - ALC, For Electric Drill, For Concrete

    ab
    11.31€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Short Size Titanium-Coated Drill Blade Set (Set of 3)

    Short Size Titanium-Coated Drill Blade Set (Set of 3) [3 Stk. pro Packung]

    CUSTOM KOBO

    Cross-thinning. (Over φ 3.0 mm) Outstanding bite. For Ironworking / Wood / Light Alloy / Synthetic Resin / Electric Drill / Ironworking / Woodworking

    ab
    6.30€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Cushion Drill (for Iron Work)

    Cushion Drill (for Iron Work)

    VESSEL

    For various hole drilling or tapping use hole drilling in iron / light metals / composite resin / lumber etc. High hardness HHS (high strength steel) steel retains its sharpness.

    ab
    7.26€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Cushion Drill, for Iron Work, Set of 3

    Cushion Drill, for Iron Work, Set of 3

    VESSEL

    For various hole drilling or tapping use hole drilling in iron / light metals / composite resin / lumber etc. High hardness HHS (high strength steel) steel retains its sharpness.

    ab
    13.41€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Short Size Blind Hole Drill Blade Set (Set of 3)

    Short Size Blind Hole Drill Blade Set (Set of 3) [3 Stk. pro Packung]

    CUSTOM KOBO

    Shorter size drill bit sets that offer great machining productivity. Drill shank structure ensures a firm grip and prevents slip.

    ab
    8.90€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hex Axis Short Titanium Drill

    Hex Axis Short Titanium Drill

    TRAD

    Shorter size drill bit sets that improve machining productivity.

    ab
    3.25€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Long Drill for Hexagonal Metalwork

    Long Drill for Hexagonal Metalwork

    ONISHI MANUFACTURING

    Hexagonal shaft (6.35 mm) finish for one-touch fitting to impact drivers. X-Thinning Processing

    ab
    14.91€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Drill for Porcelain Tile

    Drill for Porcelain Tile

    MIYANAGA

    Use of super hard chip with a special shape allows smooth hole drilling even through ceramic tiles.

    ab
    9.60€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Charging Screwdriver Drill For Tile

    Charging Screwdriver Drill For Tile

    MIYANAGA

    It can be used in charging impact drill. By adopting carbide chip of special shape, tile can be smoothly drilled.

    ab
    10.46€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Cushion Drill (Blind Hole Drill)

    Cushion Drill (Blind Hole Drill)

    VESSEL

    Wood and laminated wood, bamboo, gypsum board, resin, etc. For drilling, prepared hole drilling of fragile materials.

    ab
    8.83€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Dry IT Bind Method

    Dry IT Bind Method

    MIYANAGA

    With dry cutting, there is no worrying about post-processing water and dirt. With low vibration and low noise, can be used at any time and place.

    ab
    7.11€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wet Mist Diamond Drill One-Touch Type

    Wet Mist Diamond Drill One-Touch Type

    MIYANAGA

    Drilling of hard-to-cut materials such as tiles, porcelain tile, stone is also possible speedily. By using water, chip discharge and cooling of the diamond cutting edge is performed, and drilling efficiency can be increased.

    ab
    15.92€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Mist Diamond Drill Box Kits

    Mist Diamond Drill Box Kits

    MIYANAGA

    Important items for use in mist diamond are stored in 1 box.

    ab
    210.83€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Deltagon Bits for Rotation

    Deltagon Bits for Rotation

    MIYANAGA

    Performs block, mortar, ordinary tile drilling in rotating mode only.

    ab
    7.83€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Deltagon Bits for Vibration

    Deltagon Bits for Vibration

    MIYANAGA

    Allows nearly perfectly round hole drilling. Improved positioning performance.

    ab
    7.83€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Deltagon Bits for Vibration SG

    Deltagon Bits for Vibration SG

    MIYANAGA

    Can create hole openings that are a near perfect circle. Improves positioning ability. Bits fit perfectly with the unique form.

    ab
    8.10€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Drill for Hexagonal Porcelain Tile

    Drill for Hexagonal Porcelain Tile

    ONISHI MANUFACTURING

    [Characteristics] Can be used with impact drills (12 V or more), and is ideal for opening holes in porcelain tile. [Use] Work Materials: Porcelain Tile, Interior Tile, Gypsum Board, Tiling, Blocks, Mortar.

    ab
    11.09€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Under Hole Drill Set (6 Pieces Set)

    Under Hole Drill Set (6 Pieces Set) [6 Stk. pro Packung]

    CUSTOM KOBO

    Tapered shape & double flute provide superior cutting sharpness. For power drilling and pilot hole drilling in wood, bamboo, aluminum, and gypsum board

    ab
    16.76€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wet Diamond Drill for Tile Aqua Shot

    Wet Diamond Drill for Tile Aqua Shot

    MIYANAGA

    Has excellent durability. Water is automatically supplied to the cutting edge. Possible use with impact drill, enables simple codeless application. 100V electric drill also available.

    ab
    5.31€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen