• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Schneidwerkzeuge für Holzbohrer

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • 9 Tage oder weniger
  • Woodworking Bit Carbide Straight Bit

    Woodworking Bit Carbide Straight Bit

    DAINISHO

    [Features] Pointed edge tool for hole drilling, grooving, cutting out, and stair ruling. For hole drilling, grooving, and cutting out, etc. (wood working and bottom surface are beautifully finished using a high-speed cutting tool). Successful as a pointed edged tool for each manufacturer's stair ruling. An ideal 6 × 8 × 35 hinge bit for machining hinge excavation in one operation.

    ab
    22.10€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Short Bit for Woodworking

    Short Bit for Woodworking

    TRAD

    Spiral drill edge assures good bite into workpiece and accelerates drilling. Produce clear finish surfaces of the workpiece.

    ab
    5.64€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hole Saw for Woodworking

    Hole Saw for Woodworking

    MITSUTOMO

    Ideal for drilling into veneer, plywood and wood. For rotation use.

    ab
    5.29€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Short Bit

    Short Bit

    STAR-M

    For Shallow Penetration Drilling

    ab
    7.94€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Circle Cutter

    Circle Cutter

    TRUSCO NAKAYAMA

    [Characteristics] Can be used on a wide range of materials, from wood to sheet iron. For drilling large holes using electric drills or drill presses. [Use] Work material: thin sheet iron (up to 1.5 mm), plywood, plastic, aluminum sheet (up to 1.2 mm), brass plates, acrylics (up to 6.3 mm).

    ab
    35.96€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wave Cutter

    Wave Cutter

    STAR-M

    For drilling work of wood and bamboo

    ab
    21.54€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Adjustable Circle Cutter

    Carbide Adjustable Circle Cutter

    STAR-M

    Drilling for down light, pipe, duct, and the like.

    ab
    9.23€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Woodworking Bit Straight Trimmer

    Woodworking Bit Straight Trimmer

    DAINISHO

    [Features] Bottom leveling / wiping joints.

    ab
    30.40€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • SDS Bit for Woodworking

    SDS Bit for Woodworking

    ONISHI MANUFACTURING

    Lightweight hammer drill can be used as a woodworking drill at a touch of a button (rotation mode only).

    ab
    10.89€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide Counterboring Cutter

    Carbide Counterboring Cutter

    DAINISHO

    [Features] Cutter for spot facing / counter boring / groove cutting. For sliding hinges, for example, and handles for fusuma (Japanese sliding panels). A bottom-edge type of carbide blade has been adopted to prevent recoil due to the light sharpness and biting-in. We can guarantee you smoother operation and a longer tool life. Ideal for countersinking such as sliding hinges and handles for fusuma sliding doors, etc.

    ab
    65.62€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • Bamboo Drill

    Bamboo Drill

    STAR-M

    For drilling holes in bamboo, lumber, and acryllic.

    ab
    11.09€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Router Bit, Straight Bit with Guide Bearing

    Router Bit, Straight Bit with Guide Bearing

    DAINISHO

    [Features] Both round and square holes can be handled with this one tool.

    ab
    29.00€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Router Bit, Bose Surfaces

    Router Bit, Bose Surfaces

    DAINISHO

    A lightweight rigid plastic board made of a three-layered structure that traps air in the middle. [Features] For decorative surfaces / chamfering / joining.

    ab
    51.60€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • High Speed Hexagonal Shaft Chamfering Cutters 90°

    High Speed Hexagonal Shaft Chamfering Cutters 90°

    STAR-M

    For Deburring and Chamfering After Hole Drilling

    ab
    10.35€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Combined-Use Bit for Woodworking

    Combined-Use Bit for Woodworking

    TRAD

    Spiral drill edge assures good bite into workpiece and accelerates drilling. Produce clear finish surfaces of the workpiece.

    ab
    6.41€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hexagonal Dowel Cone / Wood Dowel

    Hexagonal Dowel Cone / Wood Dowel

    ONISHI MANUFACTURING

    [Characteristics] Drill specialized for slit hole opening. Comes with a stopper that allows hole opening to a certain depth to be performed. 6.35 hexagonal shaft that can be used with impact drills. This drill has the required effective length to open slit holes in wood. Comes with a stopper that allows hole opening to a certain depth. [Application] Work Material: Wood.

    ab
    3.84€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Woodworking Circle Cutter

    Woodworking Circle Cutter [1-2 Stk. pro Packung]

    MITSUTOMO

    [Characteristics] Ideal for drilling holes in wood and gypsum board. For drilling holes using electric drills or drill presses. [Application] Work material: wood / gypsum board / vinyl chloride / plastic.

    ab
    8.93€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Woodworking Bit Ten-By-Router

    Woodworking Bit Ten-By-Router

    DAINISHO

    Resale long-lasting ultra-fine carbide tips

    ab
    30.98€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • Woodworking Bit Easy Nick Bit

    Woodworking Bit Easy Nick Bit

    DAINISHO

    With one-sided nickel blade cuts in two with a single stroke wood board and thick plywood (Rough cutting type)

    ab
    30.98€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Drill for SDS Iron Processing

    Drill for SDS Iron Processing

    ONISHI MANUFACTURING

    Lightweight hammer drill can be used as an iron drill at a touch of a button (rotation mode only). Stainless steel machining is supported

    ab
    14.38€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Laminated Wood Drill

    Laminated Wood Drill

    STAR-M

    Drilling of hardwood, laminated materials and synthetic sleepers

    ab
    70.03€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Router Bit, Polishing for Joints

    Router Bit, Polishing for Joints

    DAINISHO

    [Features] Cuts out the board stuck on top into the same shape as the foundation.

    ab
    29.71€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Combined-Use Bit

    Combined-Use Bit

    ONISHI MANUFACTURING

    [Characteristics] Ideal for drilling holes in supports. Can perform drilling with impact drivers up to φ21 mm. [Application] Work Material: Wood. For through holes on wood materials.

    ab
    8.46€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Short Bit

    Short Bit

    ONISHI MANUFACTURING

    [Characteristics] Ideal for opening holes in sheets or boards. Can be used to perform hole opening with impact drivers up to φ21 mm in size. 2 ball grooves have been provided to the hexagonal shaft (6.35 mm) section, making it possible for use with both manual handles and impact drivers. [Application] Work Material: Wood. For through holes on wood materials.

    ab
    7.70€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Long Drills Total Length 500

    Long Drills Total Length 500

    ONISHI MANUFACTURING

    [Characteristics] For through hole on wood materials. A tool for drilling deep holes in wooden materials. [Application] Work Material: Wood.

    ab
    21.79€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Triple Cutters

    Triple Cutters

    STAR-M

    For drilling in a wide variety of materials

    ab
    15.74€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Drill Bit

    Drill Bit

    STAR-M

    For Deep Penetration Holes

    ab
    12.95€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Bearings for corner bits

    Bearings for corner bits

    DAINISHO

    [Features] Bearing for corner bit part.

    ab
    6.98€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • Woodworking Bit Carbide Dovetail Groove

    Woodworking Bit Carbide Dovetail Groove

    DAINISHO

    A single piece can perform both male and female finish machining.

    ab
    31.54€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • One-Touch Gimlets

    One-Touch Gimlets [1-2 Stk. pro Packung]

    STAR-M

    Drilling for down light, pipe, duct, and the like.

    ab
    5.80€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Adjustable Circle Cutter for Charging Drill

    Adjustable Circle Cutter for Charging Drill

    STAR-M

    Drilling for down light, pipe, duct, and the like.

    ab
    6.37€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carbide V Type Bolt Filling Bit

    Carbide V Type Bolt Filling Bit

    STAR-M

    For counterboring screw washers

    ab
    91.49€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Adjustable Grooving Cutter 255E

    Adjustable Grooving Cutter 255E

    DAINISHO

    - AJ255EC: For medium-speed rotation, cutting width 3 - 27 mm, both sides polished. Almost no bottom curving.

    ab
    332.42€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • Router Bit, Grooved Surface

    Router Bit, Grooved Surface

    DAINISHO

    [Features] An edged tool for decorative surfaces / surface chamfering of wood-based and resin-based materials (artificial marble).

    ab
    49.63€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • Router Bit, Stopper Cutting Router

    Router Bit, Stopper Cutting Router

    DAINISHO

    Facilitates advanced cut end treatment of Decola or veneer.

    ab
    96.14€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • Adjustable Grooving Cutter 205DX

    Adjustable Grooving Cutter 205DX

    DAINISHO

    · AJ205DX: For high-speed rotation / 2.8 - 23 mm cutting width, polished on both sides. 18 mm wide for a flat base. [Features] For grooving and gouging out, etc. Machining can be done freely by turning the dial. The groove width can be freely adjusted by simply turning the dial, which means that several different cutters do not have to be prepared beforehand. Because there is a large number of blades, poly plywood and veneer give off minimal fluff.

    ab
    230.58€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • Hex Axis Under Hole Drill

    Hex Axis Under Hole Drill [1-3 Stk. pro Packung]

    STAR-M

    Screw tightening, prevents cracking of wood in pre-drilling holes prior to nailing.

    ab
    7.80€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Router Bit, Stepped Cove Surface

    Router Bit, Stepped Cove Surface

    DAINISHO

    [Features] An edged tool for decorative surfaces / surface chamfering of wood-based and resin-based materials (artificial marble).

    ab
    53.46€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • Router Bit, Male Grafting Bit

    Router Bit, Male Grafting Bit

    DAINISHO

    On Male Machining of Wooden Flooring

    ab
    98.72€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • Woodworking Bit Solid Carbide Straight Bit

    Woodworking Bit Solid Carbide Straight Bit

    DAINISHO

    [Features] Made of solid carbide, it is difficult to break. Because it is made of solid carbide, the carbide straight bit in this type provides a higher rigidity and it is difficult to break. Ideal for fine grooving and cutting out.

    ab
    30.41€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Woodworking Bit V Groove Bit

    Woodworking Bit V Groove Bit

    DAINISHO

    For Lettering / Decorative Engraving

    ab
    60.00€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Woodworking Bit U Groove Bit

    Woodworking Bit U Groove Bit

    DAINISHO

    For Door Pull Handle Groove and Stair Cleat

    ab
    46.43€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Woodworking Bit Carbide 1 Step (Single-Sided) Flash Bit

    Woodworking Bit Carbide 1 Step (Single-Sided) Flash Bit

    DAINISHO

    [Features] For cutting out of single-sided veneer and boards, etc. In the case of thin core material, the narrow 6 x 6 x G5 guide (G) is used.

    ab
    30.99€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Guide Rod for Counterboring Cutter / Gimlet

    Guide Rod for Counterboring Cutter / Gimlet

    DAINISHO

    [Features] Can be used for both a safe counterboring cutter, and a counterboring cutter with gimlet accessory. With pilot holes drilled by braces or gimlets, please be sure to use the same sized guide bar. It is dangerous to work with 5" guide bars in 6" pilot holes. For vertical counterboring of battledore bolts, etc., mounting a gimlet to the counterbore body allows the tap hole and counterbore to be machined simultaneously.

    ab
    12.83€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • Impact Bit, Short

    Impact Bit, Short

    STAR-M

    Drilling General Lumber While Using Impact Driver Short

    ab
    7.94€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen