• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Scheiben(Seite5)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • 8 Tage oder weniger
  • 9 Tage oder weniger
  • 12 Tage oder weniger
  • 16 Tage oder weniger
  • 19 Tage oder weniger
  • Felt Disc (Direct Screw-in Type)

    Felt Disc (Direct Screw-in Type) [5 Stk. pro Packung]

    TRUSCO NAKAYAMA

    [Features] - Uses oil abrasive (blue alundum, white alundum, tripoli) and does mirror finishing based on application. • A direct screwing type. [Applications] • For polishing or wiping mirror-finished surfaces.

    ab
    48.35€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Bevel Disc

    Bevel Disc [5 Stk. pro Packung]

    TRUSCO NAKAYAMA

    The disc processed into a special umbrella shape, the tip of the disc contacts the work piece at all times to deliver a beautiful finish. High flexibility allows excellent fitting to uneven surfaces without excessively scraping off the work piece. Minimum clogging with no welding of nylon. Allows safe use with no worries of wires scattering unlike with wire brushes. Allows one touch attachment / removal of the grinder with a M10 screw. Operator-friendly design with less axial deflection. Stubborn rust removal, scorching removal and crane work.

    ab
    65.97€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GP Sander Felt Hard 100 x 25 x M10

    GP Sander Felt Hard 100 x 25 x M10 [5 Stk. pro Packung]

    YANASE

    Mirror surface processing where abrasive material is attached and used as is, and even can be used in blowing also.

    • Mengenrabatt
    ab
    115.82€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GP Sander Paper 100 x 25 x M10

    GP Sander Paper 100 x 25 x M10 [5 Stk. pro Packung]

    YANASE

    Soft polishing with flexible paper.

    • Mengenrabatt
    ab
    45.17€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Techno Disc C Type

    Techno Disc C Type

    ICHIGUCHI

    Uses silicon carbide abrasive. Known for providing superior cutting without applying pressure, sharply strips brittle materials and aggressively strips hard materials.

    ab
    11.56€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Gold Magic

    Gold Magic [50-100 Stk. pro Packung]

    MIRKA

    [Features] Boasts high durability and resistance to catching thanks to the hard-coated surface. [Use] Rougher numbers are for putty-sanding and paint removal, finer numbers are for primer or painted surface dry-sanding.

    ab
    40.66€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Surface Discs

    Surface Discs

    MURAKO

    Non-woven fabric does not deplete or warp. 3 types of pads are included for use in appropriate applications.

    ab
    4.62€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Surface Discs

    Surface Discs

    MURAKO

    Non-woven fabric does not deplete or warp. 3 types of pads are included for use in appropriate applications. Better grindability and durability compared to standard products.

    ab
    5.08€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly Fan R Flap Disc

    Poly Fan R Flap Disc

    PFERD

    The POLIFAN SG flap disk SG offers high performance and long life span through use of an oxidized aluminum abrasive coating. Surface grinding and corner grinding of iron, stainless steel, and plastic.

    ab
    11.33€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • FCA Disc

    FCA Disc [100 Stk. pro Packung]

    NIHON KENSHI

    Standard type for general polishing. Green on the back.

    ab
    86.67€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Rico Disc φ100 Zirconia Abrasive Grain

    Rico Disc φ100 Zirconia Abrasive Grain [10 Stk. pro Packung]

    RIKEN CORUNDUM

    Handles heavy grinding of a wide range of materials. High-capacity for heavy grinding. (Uses zirconia abrasive) Appropriate for iron, stainless steel, aluminum and a wide range of materials.

    • Mengenrabatt
    ab
    42.55€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Rico Disc φ100 Arundum Abrasive Grain 99-RCDA

    Rico Disc φ100 Arundum Abrasive Grain 99-RCDA [10 Stk. pro Packung]

    RIKEN CORUNDUM

    Achieves a high cost performance. Design suitable for iron. Achieves a high cost performance by reducing disc wear.

    • Mengenrabatt
    ab
    38.73€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • One-Touch Multi-Wing Disc (Alumina)

    One-Touch Multi-Wing Disc (Alumina)

    RYOBI

    For grinding various types of metal and wood, and for other abrasion work.

    ab
    16.98€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Smooth Paper (125mm)

    Smooth Paper (125mm)

    RYOBI

    Paper for the PE-1400 / 2010 sander polisher.

    ab
    16.13€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • PG PS Disc (Hard)

    PG PS Disc (Hard) [100 Stk. pro Packung]

    SANKYO RIKAGAKU

    Uses enhanced abrasive powder, long life. Close coat, designed to emphasize grinding force.

    ab
    41.02€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ceramic Polisher Disc - Set of 6

    Ceramic Polisher Disc - Set of 6 [6 Stk. pro Packung]

    TACT

    The grinding wheel has a combination of ceramic abrasive powder and elastic rubber, so it can make a smooth surface with no scratches on the material using a grinder at less than 5,500 RPM.

    ab
    142.33€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GP Top DX

    GP Top DX [5 Stk. pro Packung]

    TRUSCO NAKAYAMA

    [Features] • Multi-purpose type with many particle variations that handles rough finishing to finish polishing. • Air-cooling action allows almost no deformation or burning of work pieces caused by heat. [Applications] - For polishing of hard-to-cut materials such as stainless steel, titanium steel and nickel steel.

    ab
    33.53€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GP Top DX

    GP Top DX [5 Stk. pro Packung]

    TRUSCO NAKAYAMA

    [Features] • Multi-purpose type with many particle variations that handles rough finishing to finish polishing. • Air-cooling action allows almost no deformation or burning of work pieces caused by heat. [Applications] - For polishing of glass, stone, etc.

    ab
    27.25€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GP, Top (for Concrete and Silicon Carbide)

    GP, Top (for Concrete and Silicon Carbide) [10 Stk. pro Packung]

    TRUSCO NAKAYAMA

    [Features] - Uses high hardness silicon carbide abrasive. - Reduced clogging thanks to using coarse abrasive particles (#24). - Finishes the surface without cutting in deeply. [Applications] - For chipping of concrete, chamfering of stone, glass, roof tiles, etc., perfect for spot repairs. - Pre-treatment of the lining of water pipes, etc. Tool used: disc grinder.

    ab
    69.86€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GP, Top, Premium, Double Flap

    GP, Top, Premium, Double Flap [10 Stk. pro Packung]

    TRUSCO NAKAYAMA

    [Features] - This is a hardworking disc paper that grinds like a grinding stone. - Made with a double flap to resist burning. [Applications] - Grinding and polishing of hard-to-cut materials such as stainless steel.

    ab
    53.19€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GP Tri-surface Disc

    GP Tri-surface Disc [5 Stk. pro Packung]

    TRUSCO NAKAYAMA

    [Features] • Allows a wide range of use from simple grinding work to combined use of grinding and polishing. Can polish on the top, bottom and side surfaces due to the V-folded polishing cloths being glued to the pad. The cushioning property is less than that of GP Multi Disc, but offers perfect fitting on uneven surfaces with no worries for deep scraping. Can be used up to the base part, which makes it very economical. • Polishing material for professional use with individually hand-inserted and calked blades. [Applications] • For polishing metal tanks, etc. and various deburring processes. • Suitable for groove polishing. - Polishing of metals. Tool used: disc grinder.

    ab
    41.55€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GP Tri-surface Disc

    GP Tri-surface Disc [5 Stk. pro Packung]

    TRUSCO NAKAYAMA

    [Features] • Allows a wide range of use from simple grinding work to combined use of grinding and polishing. Can polish on the top, bottom and side surfaces due to the V-folded polishing cloths being glued to the pad. The cushioning property is less than that of GP Multi Disc, but offers perfect fitting on uneven surfaces with no worries for deep scraping. Can be used up to the base part, which makes it very economical. • Polishing material for professional use with individually hand-inserted and calked blades. - Zirconia type has good purchase on grinding materials. [Applications] • For polishing metal tanks, etc. and various deburring processes. • Suitable for groove polishing. - Grinding and polishing of non-ferrous metals such as stainless steel. Tool used: disc grinder.

    ab
    41.50€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GP Multi-Disc

    GP Multi-Disc [5 Stk. pro Packung]

    TRUSCO NAKAYAMA

    [Features] • The small pad with cushioning property allows for high performance exertion on uneven surfaces without deep scraping. • Can be used to the end, which makes it economical. • Allows side face polishing. • Soft touch allows for tireless use. • Polishing material for professional use with individually hand-inserted and calked blades. [Applications] • Suitable for removing weld beads, peeling paint, polishing before plating, or polishing stainless steel, iron, alloys, woods, plastics, etc. Tool used: disc grinder.

    ab
    53.49€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GP, Disc Wheel Soft (Diagonal Planted Type)

    GP, Disc Wheel Soft (Diagonal Planted Type) [5 Stk. pro Packung]

    TRUSCO NAKAYAMA

    [Features] - The flaps are on a diagonal, making for a soft touch on workpieces. - Heat dissipation property allows almost no deformation or burning of ground materials caused by heat. [Applications] • For polishing before plating, metal surface polishing, rust removal and deburring. - Polishing of woods and plastics. Tool used: disc grinder.

    ab
    27.89€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • New Nylon Disc (High-Rotation Type and Direct Screw-In Type)

    New Nylon Disc (High-Rotation Type and Direct Screw-In Type) [5 Stk. pro Packung]

    TRUSCO NAKAYAMA

    [Features] • Allows for one touch (screw) attachment. - No burning in or clogging, even when adjusting the number of rotations. (High Rotation Model) • Uses a nylon polishing material in which intertwined nylon fibers are added with abrasive materials and then bound together. •Allows polishing without excessively cutting into the polished material. [Applications] • For removing weld burn, sealer sanding of curved surfaces or round parts of woodworking materials, finishing before painting, satin finishing, pre-treatment for mirror surface finishing, or removing paint.

    ab
    47.35€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GP Cleaning Wheel

    GP Cleaning Wheel

    TRUSCO NAKAYAMA

    [Features] - Has flexibility so that it accommodates unevenness well. - Cleans the surface without scratching the underlayer. [Applications] - For removing rust or paint, cleaning before welding

    ab
    3.93€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Soft Power Disc α

    Soft Power Disc α [5 Stk. pro Packung]

    TRUSCO NAKAYAMA

    [Features] - Blue sponge-shaped grinding stone using superior resilience polyvinyl alcohol (PVA) that allows for a beautifully finished surface thanks to appropriate elasticity. - Uses GC (green carborundum) + WA (white alundum) grinding particles, we carefully selected resin in comparison to conventional PVA. • Enhanced durability provides beautiful and stable polished surfaces. [Applications] - For removing rust on all kinds of metals, deburring, welding surface finishing, underlayer polishing for plating and coating, scaling, finishing of tanks. (Iron, Stainless Steel, Aluminum, Zinc, Brass, Copper)

    ab
    68.63€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Bevel Disc

    Bevel Disc [5 Stk. pro Packung]

    TRUSCO NAKAYAMA

    Thanks to the disc processed into a special umbrella shape, the tip of the disc contacts the work piece at all times to deliver a beautiful finish. High flexibility allows excellent fitting to uneven surfaces without excessively scraping off the work piece. Minimum clogging with no welding of nylon. Allows safe use with no worries of wires scattering unlike with wire brushes. Allows one touch attachment / removal of the grinder with a M10 screw. Operator-friendly design with less axial deflection. Rust removal and paint stripping.

    ab
    48.08€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Power Diamond Disc 100 x 20 (15)

    Power Diamond Disc 100 x 20 (15)

    YANASE

    High quality diamonds firmly attached for a product combining excellent sharpness and great durability.

    • Mengenrabatt
    ab
    62.43€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Steel Wire Plating Cap Brush E Type 75 x M10 x P1.5

    Steel Wire Plating Cap Brush E Type 75 x M10 x P1.5 [10 Stk. pro Packung]

    YANASE

    A product with high sharpening power and low defect rate.

    • Mengenrabatt
    ab
    77.90€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GP Sander Unylon 100 x 25 x M10

    GP Sander Unylon 100 x 25 x M10 [5 Stk. pro Packung]

    YANASE

    Polishes softly.

    • Mengenrabatt
    ab
    60.19€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • FF Disc 100 x 15

    FF Disc 100 x 15 [5 Stk. pro Packung]

    YANASE

    Flap structure means no clogging, adapts well even to curved and uneven surfaces for finishing polishing.

    • Mengenrabatt
    ab
    23.13€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GP Sander Felt Soft 100 x 25 x M10

    GP Sander Felt Soft 100 x 25 x M10 [5 Stk. pro Packung]

    YANASE

    Mirror surface processing where abrasive material is attached and used as is, and even can be used in blowing also.

    • Mengenrabatt
    ab
    115.82€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GP Disc S Type 100 x 15

    GP Disc S Type 100 x 15 [10 Stk. pro Packung]

    YANASE

    Soft contact adapts well to the workpiece.

    • Mengenrabatt
    ab
    55.48€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GP Disc S Type 150 x 22

    GP Disc S Type 150 x 22 [5 Stk. pro Packung]

    YANASE

    Uses a special backup substrate material that leaves no residue, allowing the abrasive cloth to be used without waste for a drastically improved product lifespan.

    • Mengenrabatt
    ab
    56.41€
    Minimum Lieferzeit
    22 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SG Unylon Plack Hard

    SG Unylon Plack Hard [5 Stk. pro Packung]

    YANASE

    Wipes away rust and paint without scratching the underlayer.

    • Mengenrabatt
    ab
    61.46€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Nylon Discs

    Nylon Discs [25 Stk. pro Packung]

    YANASE

    A special fibrous disk with great elasticity. Achieves a flat and smooth finished surface without biting into the target object. Allows grinding of both ferrous and non-ferrous metals, doesn't clog and has little dust.

    • Mengenrabatt
    ab
    26.01€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • S / C Disc

    S / C Disc

    ICHIGUCHI

    A lightweight and safe cloth type (non-woven) polishing disc that fits well to both flat and curved surfaces. Mount the special pad for work with flat surfaces and remove it for work with curved surfaces.

    ab
    7.30€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Techno Disc / A

    Techno Disc / A [20 Stk. pro Packung]

    ICHIGUCHI

    Adopts a highly self-sharpening substrate and aluminum abrasive material (dulled grinding surfaces change back to new surfaces). The speed of the high grinding force and grinding speed are its characteristic features.

    • Mengenrabatt
    ab
    79.31€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Techno Disc / A

    Techno Disc / A [5 Stk. pro Packung]

    ICHIGUCHI

    A polishing disk devised for heavy duty grinding particularly for hard materials and welding bead work. Very effective when worked with high pressure.

    ab
    57.86€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Techno Disc HYBRID Sample Kit

    Techno Disc HYBRID Sample Kit

    ICHIGUCHI

    Affordable set of the revolutionary discs that can be used for upper, outer peripheral, and bottom surfaces

    ab
    36.23€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Poly Disc 6682371

    Poly Disc 6682371

    RYOBI

    For removing rust and coating stripping.

    ab
    21.27€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • One-Touch Multi-Wing Disc (Zirconia)

    One-Touch Multi-Wing Disc (Zirconia)

    RYOBI

    For grinding various types of metal and wood, and for other abrasion work.

    ab
    16.98€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Multi-Wing Disc (Zirconia)

    Multi-Wing Disc (Zirconia)

    RYOBI

    For heavy duty grinding work of iron and stainless steel.

    ab
    14.83€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • GP, Top 25 (Alundum)

    GP, Top 25 (Alundum) [5 Stk. pro Packung]

    TRUSCO NAKAYAMA

    [Features] - Long life type. For standard metals. Multi-purpose type with many particle variations that handles rough finishing to finish polishing. Prevents polishing burn, which is a problem in elastic grinding wheels, has high grinding volume and flexible grinding stone with 7 to 8 times longer life. Also has cushion effect compared to grinding stones, allowing for a soft impact on grinding materials. - Largely self-sharpening, minimal clogging. • Air-cooling action allows almost no deformation or burning of work pieces caused by heat. • Polishing material for professional use with individually hand-inserted blades . [Applications] • For metal polishing, weld bead removal, automobiles, hulls, tank and other item polishing, various deburring processes, and polishing of other non-ferrous materials including stainless steel, steels, and non-ferrous metal polishing. Tool used: disc grinder.

    ab
    41.78€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen