• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Inbusschlüssel(Seite2)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 7 Tage oder weniger
  • 9 Tage oder weniger
  • Torsion Multifunction Short Wrench (3-dimension Bent Type)

    Torsion Multifunction Short Wrench (3-dimension Bent Type)

    TRUSCO NAKAYAMA

    [Features] - Both ends are opposite sides/corner bending, and operation with swing angle 30°is possible. - Convenient to use in confined spaces where there is not enough room to rotate hex bar. Hardness is HRC53 ~ 57. Material is general chrome vanadium steel. - Torsion wrench TTX-9S short type. - [Applications] For screw tightening in tight places.

    ab
    5.08€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • T-shaped hex wrench

    T-shaped hex wrench

    KTC(KYOTO TOOL)

    [Features] T-shaped handle suited for rapid fastening. Convenient for removal of hex type bolts mounted in deep places. [Applications] - General-purpose Tools

    ab
    16.79€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ball Point Hex Wrench

    Ball Point Hex Wrench

    WERA

    [Features] Wera's independently developed Hex-Plus surface contact structure means the inner sides of hex screws aren't scratched, improving the longevity of the screws. High torque transfer rate for increased work efficiency. Rubber coating for greater grip.

    ab
    6.74€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ball Point Hex Wrench Black Dye

    Ball Point Hex Wrench Black Dye

    TRUSCO NAKAYAMA

    [Features] Material is chrome vanadium steel (CR-V). The surface treatment is a black dye treatment. Hardness is HRC52 ~ 56.

    ab
    2.21€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Thin Offset Wrench

    Thin Offset Wrench

    TRUSCO NAKAYAMA

    [Features] - JIS quality assurance torque is significantly increased by modifying the thickness of sheet iron to 3 mm. - Commercially available bits can be used in the hex socket of the handle rear end, and by installing a long bit, it will also handle the tightening of screws in deep places. [Use] For tightening work in deep, tight places. - Suitable for wide variety of applications such as in-plant operations, maintenance of machinery, servicing vehicles etc.

    ab
    6.02€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hex wrench

    Hex wrench [1-9 Stk. pro Packung]

    TRUSCO NAKAYAMA

    [Features] - Use short end and hold long end to tighten with strong force. Also, by using long end and hold short end to tighten quickly. Hardness is HRC54 ~ 59. Material is chrome vanadium steel.

    ab
    2.56€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • T-shaped Hex Spanner (Bottle Catch / Iron Handle / Long Type)

    T-shaped Hex Spanner (Bottle Catch / Iron Handle / Long Type)

    EIGHT TOOL

    [Features] Long 500 mm underneck length that is ideal for tightening screws in deep spaces. The fit ring embedded in Taper Head tips grips cap bolts firmly for insertion of screws with a single hand, great for replacing bolts in deep or tight spaces. [Applications] - For Tightening Work Of Hex Socket Bolts

    ab
    29.63€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • High-grade Ball Point L-type Hex Wrench (Short Neck Type)

    High-grade Ball Point L-type Hex Wrench (Short Neck Type)

    KTC(KYOTO TOOL)

    [Features] Independent new design for use as a tightener. An original plastic holder makes for convenient transport and storage. Designed so the hex shaped tip fits perfectly into the hex hole of bolts for maximum surface contact to reduce tool wear or slippage. Neck length is approximately 1/2 of conventional products so can be used for work in tight places. - Bending angle of under head is set as 95°to ensure work space. [Applications] - General-purpose Tools

    ab
    100.33€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Mini Allen Wrench (Minute)

    Mini Allen Wrench (Minute)

    TRUSCO NAKAYAMA

    Millimeter size ultra-small wrench. The surface is treated with a blackening die. Material is chrome vanadium steel.

    ab
    1.69€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • High-grade L-type long hex wrench

    High-grade L-type long hex wrench [1-9 Stk. pro Packung]

    KTC(KYOTO TOOL)

    [Features] High quality, tough chrome finish makes for a nice textured, rust-resistant and beautiful finish. Specially selected alloy steel gives greater durability against fatigue and resilient against twisting. Ultra first-class heat-treatment. An original plastic holder makes for convenient transport and storage. [Applications] - General-purpose Tools

    ab
    3.76€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Daxkey wrench

    Daxkey wrench [1-9 Stk. pro Packung]

    ASAHI METAL INDUSTRY

    [Features] Shortened underneck allows for easy insertion and removal in spaces where there is little space above the bolt. - Ideal for operation at narrow frontage since wrench has both opening and left and right side is opposite side/corner bending. (30°Usable) [Applications] - Tightening work of hex socket bolts / hex socket set screws

    ab
    7.12€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Short Underneck Extra Long Ball Point Hex Wrench Set

    Short Underneck Extra Long Ball Point Hex Wrench Set

    SUPER TOOL

    Ball point can be used at an angle up to 25

    ab
    49.32€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ball Point Hex Wrench (Short Type)

    Ball Point Hex Wrench (Short Type) [1-12 Stk. pro Packung]

    TRUSCO NAKAYAMA

    [Features] - Rotating holder makes it easy to take in and out of square hex bar wrenches of various sizes. The surface treatment is a black dye treatment. Hardness is HRC50 ~ 58.

    ab
    1.98€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Catcher Wrench (Steel Sprung with Steel Balls)

    Catcher Wrench (Steel Sprung with Steel Balls) [1-9 Stk. pro Packung]

    ASAHI METAL INDUSTRY

    [Features] Material is an ultra-strong steel alloy.

    ab
    6.08€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • L-shaped Hex Wrench Set AS900

    L-shaped Hex Wrench Set AS900

    TONE

    Uses a special metal alloy for greater torque, durability and abrasion resistance. High quality heat treatment and hard chrome plating prevent wear of hex head area, high strength yet high fracture toughness (hard to fracture) to ensure operations and improve safety.

    ab
    36.04€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hex Wrench (Inch Size)

    Hex Wrench (Inch Size)

    TRUSCO NAKAYAMA

    Both tips have been chamfered to allow for easy insertion into hex sockets. Advanced heat treatment results in stabilized product quality. The surface is treated with a blackening die. Material is chrome vanadium steel.

    ab
    1.98€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ball Point Hex Wrench (Inch Sizes)

    Ball Point Hex Wrench (Inch Sizes) [9-13 Stk. pro Packung]

    TRUSCO NAKAYAMA

    Ball point allows for use at approximately 25 angles for temporary fastening of bolts and better workability. Blackening treatment. Material is chrome vanadium steel. The holder can be rotated, making it easy to take out and insert each size of wrench.

    ab
    21.19€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Catcher Wrench (7-piece Set, Steel Sprung with Steel Balls)

    Catcher Wrench (7-piece Set, Steel Sprung with Steel Balls) [7 Stk. pro Packung]

    ASAHI METAL INDUSTRY

    [Features] Steel ball and steel spring is embedded in the ball point part of the head. (3.0 ~ 6.0 mm) Tightly holds to the inner side of the bolt for convenient tightening work at deep places. Ball point creates a new structure for realization of work operable at angles of 25 to one side. Teel balls at HRC60 degree or greater hardness to stop wear. [Applications] - For tightening cap bolts and set screws.

    ab
    26.26€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 9-color Hex Shaft Ball Point (9-piece Set)

    9-color Hex Shaft Ball Point (9-piece Set) [9 Stk. pro Packung]

    ASAHI METAL INDUSTRY

    [Features] Each size has been color-coded to be able to distinguish between size dimensions at a glance. Hex shaft tip has been evenly chamfered for easy insertion into hex sockets. Tip has undergone ball point processing to make it able to rotate screws at up to 25 angles making for easy and quick work in tight spaces. Hardness is HRC54 ~ 59. [Applications] - Tightening Work Of Hex Socket Bolts / Hex Socket Set Screws

    ab
    74.04€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Long T-shaped Hexagon Wrench THW-L

    Long T-shaped Hexagon Wrench THW-L

    TONE

    Overall length is 500 mm, T-shaped hex wrench. It proves to be a powerful tool for work in deep, tight spaces.

    ab
    27.63€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • L-shaped Hex Wrench HK

    L-shaped Hex Wrench HK

    TONE

    Hex bar L-shaped wrench that achieved both smooth operations and powerful tightening

    ab
    10.76€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Rainbow L-type Wrench

    Rainbow L-type Wrench

    VESSEL

    Easy to find in tool box. Color coded by size.

    ab
    5.25€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hex Spanner (Taper Head / Semi-long)

    Hex Spanner (Taper Head / Semi-long)

    EIGHT TOOL

    [Features] Tapered Head R has greater durability and resistance to wear for even better tightening. 10 ~ 20% greater screwing strength compared to convention ball point models and is an effective tool at angles (0 ~ 20). [Applications] - For Tightening Work Of Hex Socket Bolts

    ab
    5.77€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • EX Long Color Ball Point Wrench Set (9 PCS)

    EX Long Color Ball Point Wrench Set (9 PCS)

    TRAD

    Easy to identify size with pop colors.

    ab
    21.43€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ball Point / Hex Wrench Set

    Ball Point / Hex Wrench Set

    SUPER TOOL

    Ball point can be used at an angle up to 25

    ab
    24.82€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hex Wrench (Long Type) CR-V

    Hex Wrench (Long Type) CR-V

    TRUSCO NAKAYAMA

    [Features] Material is chrome vanadium steel (CR-V). Hardness is HRC50 ~ 58.

    ab
    2.05€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ball Point Hex Wrench (Inch Sizes)

    Ball Point Hex Wrench (Inch Sizes)

    TRUSCO NAKAYAMA

    Ball point allows for use at approximately 25 angles for temporary fastening of bolts and better workability. Blackening treatment. Material is chrome vanadium steel.

    ab
    2.28€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ball Point Hex Wrench (Inch Sizes)

    Ball Point Hex Wrench (Inch Sizes)

    WERA

    Wera's independently developed Hex-Plus surface contact structure means the inner sides of hex screws aren't scratched, improving the longevity of the screws. High torque transfer rate for increased work efficiency. Rubber coating for greater grip.

    ab
    7.58€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hexagonal Bar Wrench

    Hexagonal Bar Wrench

    EIGHT TOOL

    [Features] Designed and constructed "for professionals," surpassing the ISO and JIS standards.

    ab
    2.84€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • T-shaped long hex shaft wrench

    T-shaped long hex shaft wrench

    ASAHI METAL INDUSTRY

    [Features] T-shaped handle type hex shaft wrench for a tight fit and ease of use. [Applications] - Tightening Work Of Hex Socket Bolts / Hex Socket Set Screws

    ab
    5.24€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Allen Wrench, Electrodeposition Coating

    Allen Wrench, Electrodeposition Coating [1-10 Stk. pro Packung]

    TRUSCO NAKAYAMA

    [Features] Both tips have been chamfered to allow for easy insertion into hex sockets. Advanced heat treatment results in stabilized product quality. - Over 8 mm is cathodic electrodeposition and your hands would not get dirty.

    ab
    5.58€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ball Point Hex Wrench

    Ball Point Hex Wrench

    TRUSCO NAKAYAMA

    Plane angle of hex shaft tip has been evenly chamfered. Compared to conventional products, it demonstrates high torque and outstanding durability and wear resistance. Insertion in hex hole is easier than ever, and chamfering angle is designed to adhere to the corner of the bottom of hex hole. Matte chrome plating.

    ab
    3.28€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ball Point Hex Wrench 027

    Ball Point Hex Wrench 027

    WERA

    [Features] Wera's independently developed Hex-Plus surface contact structure means the inner sides of hex screws aren't scratched, improving the longevity of the screws. High torque transfer rate for increased work efficiency.

    • Mengenrabatt
    ab
    2.55€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ball End Screwdrivers Set BPD600

    Ball End Screwdrivers Set BPD600

    TONE

    Ball-point tip screwdriver. It can be used with an angle, very convenient for quick rotation.

    ab
    62.52€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hex Wrench (Long Type)

    Hex Wrench (Long Type) [1-9 Stk. pro Packung]

    TRUSCO NAKAYAMA

    [Features] - Use short end and hold long end to tighten with strong force. Also, by using long end and hold short end to tighten quickly. Hardness is HRC54 ~ 59. Material is chrome vanadium steel.

    ab
    2.92€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ball Point Hex Wrench (Short Neck Type)

    Ball Point Hex Wrench (Short Neck Type)

    WERA

    Wera's independently developed Hex-Plus surface contact structure means the inner sides of hex screws aren't scratched, improving the longevity of the screws. High torque transfer rate for increased work efficiency. Under neck dimension is quite short, and it is convenient to use in narrow places.

    ab
    3.87€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hex Wrench Set W-91

    Hex Wrench Set W-91

    HOZAN

    Set of 7 ROSH compliant hex wrenches.

    • Mengenrabatt
    ab
    5.53€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Color Hex & Ball Point Wrench Set (9 PCS)

    Color Hex & Ball Point Wrench Set (9 PCS)

    TRAD

    Pop colors for easy identification. Rapid rotation capable ball point.

    ab
    16.10€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hex Wrench Set (7 PCS)

    Hex Wrench Set (7 PCS)

    TRAD

    For hobbies or maintenance of precision devices.

    ab
    3.81€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Micro-mouth Size Long Hex Wrench Set (6 Piece Set)

    Micro-mouth Size Long Hex Wrench Set (6 Piece Set) [6 Stk. pro Packung]

    ASAHI METAL INDUSTRY

    [Features] Both tips have been chamfered to allow for easy insertion into hex sockets. Advanced heat treatment results in stabilized product quality. [Applications] - Tightening Work Of Hex Socket Bolts / Hex Socket Set Screws

    ab
    7.14€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Long Ball Point L-type Wrench Set SBL700

    Long Ball Point L-type Wrench Set SBL700

    TONE

    Stainless steel wrench stand for convenient storage. Layout allows to identify each size at a glance.

    ab
    107.58€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • L-shaped Hollow Wrench Ball Point Stubby Short (Short Underneck / Inch Sizes)

    L-shaped Hollow Wrench Ball Point Stubby Short (Short Underneck / Inch Sizes)

    MITOLOY

    [Features] Mitoloy original shape created in response to the demands of users. Short neck makes work in enclosed spaces easy. Ball point section has undergone high-precision broach processing for use at angles up to 30. [Applications] - For work involving the tightening of hex socket bolts, set screws, etc.

    ab
    60.34€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Speed Handle Ball Point Wrench

    Speed Handle Ball Point Wrench [9 Stk. pro Packung]

    ANEX

    [Features] Rapid rotation speed handle. (Opposing sides 2.5 ~ 10 mm) Easy to grasp catch-grip. (Opposing sides 1.5, 2 mm) Tip screw catch to prevent dropping screws. (Opposing sides 8, 10 mm) Fits the screw for smooth rotation. Ball point wrench that can be rotated at an angle. (MAX angle is about 30 degrees) Strong, tenacious and hard toughened wrench. Set of frequently used sizes. [Applications] - For tightening and loosening hex socket bolts.

    ab
    58.65€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ball Point Hex Wrench Black Dye

    Ball Point Hex Wrench Black Dye [9-12 Stk. pro Packung]

    TRUSCO NAKAYAMA

    [Features] - Rotating holder makes it easy to take in and out of square hex bar wrenches of various sizes. - The surface treatment is a black dye treatment. Hardness is HRC52 ~ 56.

    ab
    21.92€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Long Neck Ball Point Allen Wrench (Long Type)

    Long Neck Ball Point Allen Wrench (Long Type)

    TRUSCO NAKAYAMA

    [Features] Ideal for tightening works in deep spaces. - Adopts high torque and tough nickel chrome molybdenum steel. - The holder can be rotated, making it easy to take out and insert each size of wrench. - Matte chrome plating. Hardness is HRC55 ~ 60. [Features] Ideal for tightening pipe straps. - Adopts high torque and tough nickel chrome molybdenum steel. - The holder can be rotated, making it easy to take out and insert each size of wrench.

    ab
    4.16€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

  • Model

  • Tip Model

  • Two-sided Width Size(mm)

    • 0.71
    • 0.89
    • 1.27
    • 1.5
    • 2
    • 2.5
    • 3
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 7
    • 8
    • 10
    • 12
    • 14
    • 17
    • 19
    • 21
    • 22
    • 24
    • 27
    • 32
    • 36
  • Two-sided Width Size(Inch)

    • 0.028
    • 0.035
    • 0.05
    • 1/16
    • 1/2
    • 1/4
    • 1/8
    • 3/16
    • 3/32
    • 3/8
    • 5/16
    • 5/32
    • 5/64
    • 7/32
    • 7/64
    • 9/64
  • Single Item / Set Classification

  • Total Length (L Size)(mm)

    • 34
    • 35
    • 38
    • 41
    • 45
    • 46
    • 47
    • 48
    • 50
    • 51
    • 52
    • 53
    • 53.5
    • 56
    • 58
    • 60
    • 61
    • 62
    • 62.5
    • 63
    • 65
    • 68
    • 69
    • 70
    • 71
    • 72
    • 74
    • 75
    • 76
    • 77
    • 77, 83, 90, 98, 106, 118, 137
    • 77, 83, 90, 98, 106, 118, 137, 156, 170
    • 78
    • 79
    • 80
    • 80.5
    • 81
    • 82
    • 83
    • 84
    • 85
    • 85 (At Time of Packaging)
    • 86
    • 87
    • 88
    • 89
    • 90
    • 91
    • 92
    • 93
    • 94
    • 95
    • 96
    • 97
    • 98
    • 99
    • 100
    • 101
    • 102
    • 103
    • 104
    • 105
    • 106
    • 107
    • 108
    • 109
    • 110
    • 111
    • 112
    • 112.5
    • 113
    • 114
    • 115
    • 118
    • 119
    • 120
    • 122
    • 123
    • 124
    • 125
    • 126
    • 127
    • 128
    • 129
    • 130
    • 131
    • 132
    • 133
    • 134
    • 135
    • 136
    • 137
    • 139
    • 140
    • 141
    • 142
    • 144
    • 145
    • 146
    • 147
    • 150
    • 151
    • 152
    • 153
    • 154
    • 155
    • 156
    • 157
    • 158
    • 160
    • 163
    • 165
    • 167
    • 170
    • 172
    • 173
    • 174
    • 175
    • 176
    • 178
    • 179
    • 180
    • 182
    • 183
    • 184
    • 185
    • 186
    • 187
    • 190
    • 191
    • 195
    • 197
    • 198
    • 199
    • 200
    • 203
    • 205
    • 206
    • 207
    • 208
    • 210
    • 212
    • 215
    • 219
    • 222
    • 223
    • 224
    • 225
    • 227
    • 228
    • 230
    • 231
    • 232
    • 233
    • 235
    • 238
    • 240
    • 244
    • 248
    • 250
    • 252
    • 260
    • 264
    • 270
    • 273
    • 280
    • 284
    • 291
    • 295
    • 296
    • 300
    • 315
    • 316
    • 320
    • 325
    • 330
    • 334
    • 336
    • 340
    • 346
    • 355
    • 360
    • 370
    • 375
    • 420
    • 500
  • Hex Neck Length (H Size) L-Model Only(mm)

    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 7.3
    • 7.5
    • 8
    • 8.5
    • 9
    • 9.5
    • 10
    • 10.2
    • 10.5
    • 11
    • 11.5
    • 11.8
    • 12
    • 12.5
    • 13
    • 13.5
    • 14
    • 14, 16, 18, 20, 24, 28, 32
    • 14, 16, 18, 20, 24, 28, 32, 36, 40
    • 14.1
    • 14.5
    • 15
    • 15.5
    • 16
    • 16.5
    • 16.7
    • 17
    • 17.1
    • 17.5
    • 17.7
    • 18
    • 18.3
    • 18.4
    • 18.5
    • 19
    • 19.5
    • 19.9
    • 20
    • 21
    • 22
    • 22.5
    • 23
    • 23.5
    • 24
    • 24.1
    • 25
    • 25.1
    • 25.3
    • 26
    • 27
    • 27.5
    • 28
    • 28.3
    • 28.5
    • 29.7
    • 30
    • 31
    • 31.5
    • 31.7
    • 32
    • 34
    • 34.1
    • 35
    • 36
    • 36.1
    • 37
    • 37.5
    • 38
    • 39
    • 40
    • 40.5
    • 42
    • 43
    • 45
    • 48
    • 50
    • 52
    • 55
    • 56
    • 60
    • 63
    • 64
    • 70
    • 72
    • 80
    • 85
    • 90
    • 100
    • 112
    • 125
    • 126
    • 140

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen