Drehmomentschlüssel
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
- Empfehlung
Drehmomentschlüssel
TOHNICHI MFG
[Merkmale]
· Wenn das eingestellte Drehmoment erreicht ist, wird der Knebel aktiviert und ein Tonsignal informiert den Benutzer, dass der Anzug abgeschlossen ist.
· Der Ratschenkopf hat 24 Zähne und eine Amplitude von 15° für außergewöhnliches Anziehen auf engstem Raum.
· Drehmoment kann einfach durch Graduierung geändert werden .
[Anwendungen]
· Für anspruchsvolle Baustellen wie Felder und solche, die Ölen und Chemikalien ausgesetzt sind.› Jetzt konfigurierenab∗ ： 119.82 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
ATG / BTG-Drehmomentmessgerät
TOHNICHI MFG
Dies ist ein handgehaltenes Drehmomentmessgerät für die Messung kleinster Drehmomente, und die Skala an der Seite des Hauptkörpers ist standardmäßig mit einer Speichernadel ausgestattet, so dass sie von oben und von der Seite geprüft werden kann.› Jetzt konfigurierenab∗ ： 281.37 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kanon Drehmomentmesser, N-SGK-Ausführung, mit Anzeige
NAKAMURA MFG
[Features]
· A 3-way chuck which can hold anything. Provides a highly accurate torque value.
· Small, lightweight, and convenient to carry.
· The tip is a three-jaw chuck (made of metal). Securely holds either round or square objects.
· Knurling allows easy gripping.
· The stepped scale face structure helps prevent scratches.
· Measurement is possible in either direction, left or right.
· The N-SGK torque gauge includes scales on both the front and side surfaces, with the same results in both locations.
· The accuracy is guaranteed up to ±3%.› Jetzt konfigurierenab∗ ： 320.54 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
ATG / BTG-Drehmomentmessgerät (mit Zeiger)
TOHNICHI MFG
[Merkmale]
-Dies ist ein handgehaltenes Drehmomentmessgerät mit einem Memory-Zeiger für die Messung von kleinsten Drehmomenten.› Jetzt konfigurierenab∗ ： 314.50 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehmomentschlüssel mit Skala, Grundausführung
TOHNICHI MFG
[Features]
· Worker fatigue decreases due to having fewer irregular shapes compared to plates.
· Dial scale can be rotated, so the indicator can be set to the configured torque and completed with "0".
[Applications]
· For inspection and tightening.› Jetzt konfigurierenab∗ ： 162.33 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Ratschenkopf, QH
TOHNICHI MFG
[Features]
· The QH-type ratchet head has a small tightening amplitude and can be easily used in confined spaces.
[Applications]
· Replacement heads selectable according to work conditions or environments.› Jetzt konfigurierenab∗ ： 63.13 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehmomentschlüssel mit Ziffernblatt (mit Nadel)
TOHNICHI MFG
[Features]
· Worker fatigue decreases due to having fewer irregular shapes compared to plates.
· Dial scale can be rotated, so the indicator can be set to the configured torque and completed with "0".
· Analog version is convenient for reading the maximum value.
[Applications]
· For inspection and tightening.› Jetzt konfigurierenab∗ ： 176.18 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehmomentschlüssel, Ausführung mit Voreinstellung
TOHNICHI MFG
[Features]
· When the set torque is reached, the toggle operates, and a signal sound lets the user know when tightening is complete.
· The ratchet head has 24 teeth and a 15-degree operating range. It shows excellent performance in space-limited working conditions.
[Applications]
· Tightening torque and basic shape of torque wrench.› Jetzt konfigurierenab∗ ： 142.01 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Vorwahl-Drehmomentschlüssel mit Griff
NAKAMURA MFG
[Merkmale]
· Der Griff ist mit einem Griff versehen.
· Sie können das erforderliche Drehmoment leicht von Hand einstellen.
· Sie können die Steckschlüssel mit einer Vielzahl von Schrauben und Muttern wechseln.› Jetzt konfigurierenab∗ ： 153.08 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 281.05 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 164.37 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 208.20 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehmomentschlüssel, Ausführung mit Voreinstellung (Direkteinstellungs- / Halte-Ausführung)
MAEDAKINNZOKU
Tip socket is a holding type that prevents bits from falling out, as a torque wrench that dramatically decreases mistakes.
[Features]
· Equipped with a hold mechanism that prevents the socket from falling off and provides excellent operability.
· In tightening work, when it reaches the set torque value, there will be a "clicking" sound or light "shock" to the hand.
· Unlike conventional types, there is no need to read the main scale and Vernier scale, so it is convenient for preventing setting errors and confirmation/management of tightening torque.
· Torque is set based on digitally displayed value of mechanical mechanisms which can be read directly.
[Applications]
· For assembly, maintenance and inspection at locations in high places where torque control is required.
· Can be used for work ranging from assembly at industrial plants to maintenance of large trucks, automobiles, general industrial equipment and plants.
· Ideal for various torque management tightening work.› Jetzt konfigurierenab∗ ： 222.77 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Flacher Drehmomentschlüssel
TOHNICHI MFG
[Features]
· Left and right torque are engraved on the scale, which can be used for additional tightening and checking loosening torque.
[Applications]
· For inspection and tightening.- Auf Lager
› Jetzt konfigurierenab∗ ： 88.55 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehmomentschlüssel
TOHNICHI MFG
[Merkmale]
· Kostensparender Drehmoment , der den Wechsel der Köpfe je nach Einsatzzweck unterstützt, z. B. Schraubenschlüssel, Ringschlüssel, Ratsche, Sechskantkopf usw. in einem einzigen Schlüssel.
· Wenn das eingestellte Drehmoment erreicht ist, wird der Kippschalter aktiviert und ein leichtes und klares Tonsignal informiert den Benutzer, dass das Anziehen abgeschlossen ist.
[Anwendungen]
· Zum Anziehen verschiedener Schraube , die in Befestigungsart und Massenproduktionsanwendungen verwendet werden.› Jetzt konfigurierenab∗ ： 96.89 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 57.09 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Schlüsselförmiger, einseitiger Drehmomentschlüssel
MAEDAKINNZOKU
Dedicated torque wrench for tightening flare nuts.
[Features]
· Standard tightening torque is set in advance for the new refrigerant's flare pipe coupling and flare nut.
* The torque value setting cannot be changed.
· When it reaches the set torque value, there will be a "clicking" sound or light "shock" to the hand.
[Applications]
· For tightening flare tube fittings and flare nuts on room air-conditioners, cooling machines, etc.› Jetzt konfigurierenab∗ ： 72.66 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Offener Kopf, SH
TOHNICHI MFG
[Features]
· The SH-type wrench head is ideal for screws with which sockets cannot be used, for flare nuts used for piping, and for working in confined spaces.› Jetzt konfigurierenab∗ ： 20.99 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
![[Kanon] Drehmomentschlüssel mit Voreinstellung](//de.misumi-ec.com/linked/material/fs/NKM1/PHOTO/N450QLK_3.jpg?$product_view_b$)
[Kanon] Drehmomentschlüssel mit Voreinstellung
NAKAMURA MFG
[Features]
· The required torque can be easily set at hand.
· By exchanging the socket, several types of bolts and nuts can be tightened.
[Applications]
· For work requiring various tightening torques to be supported.› Jetzt konfigurierenab∗ ： 153.63 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 171.65 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kanon Isolierter Drehmoment-Schlüssel, Einzelfunktion, Ratschen-Ausführung, N-QSPK-CE-Ausführung
NAKAMURA MFG
[Features]
· A special dual-layer design for the insulating material prevents accidents with electric shock.
· A special dual-layer coating of insulating material protects the operator from electric shock.
· Since the upper and lower layers of the dual-layer coating of insulating material have been color-coded, it is easy to see at a glance the extent of damage to the coating.
· The withstand voltage is within 1,000 VAC.
· Ideal for servicing, maintenance, and inspection of electric cars.
· The insulated coating socket is also a custom order product.
· The accuracy is guaranteed up to ±3%.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 227.96 € Minimum Lieferzeit ： 45 Arbeitstage *Stückpreis Standardkonfiguration
-
Kanon Drehmomentschlüssel mit Voreinstellung, Permanentmarkierung, N-MQLK-Ausführung
NAKAMURA MFG
[Features]
· Never miss a place where bolts have not been tightened. The bolt head is marked "Pon". Commercially available socket-compatible type.
· Since marking is done automatically, there is no need to perform marking work after tightening. Truly the last word in error-proofing.
· Marking is performed after the completion of tightening, serving as "the evidence of proper tightening."
· The torque wrench's socket supports one commercially available deep socket. (Note: Mounting hole machining is required.)
· The ink used is an oil-based ink made by Shachihata, so the marks are non-erasable.
· For each ink charge, sockets of 8 to 13 mm in size can be filled approximately 1,500 times. The 14-24 mm products allow marking approximately 6,000 times.
· Red ink is included as an accessory.
· Its simple structure makes maintenance easy
· The accuracy is guaranteed up to ±3%.› Jetzt konfigurierenab∗ ： 439.41 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Tohnichi CL-Drehmomentschlüssel
TOHNICHI MFG
[Features]
· A cost-saving torque wrench that can exchange heads according to the application, including wrenches, ring wrenches, ratchets, and hex heads, all with a single torque wrench.
· Torque adjustment is easy and reliable.
· A small torque wrench with easily visible large scale.
· A new locking mechanism to prevent human error such as torque setting errors has been developed.
[Applications]
· For assembly and mass production.
[Product Specifications]
· Torque Adjustment Range (N·m): 0.4 - 2
· Overall length (mm): 173
· Minimum scale (N·m): 0.02
· Torque Precision ±3%
· Load Direction: Right (head can be reversely mounted for reverse thread torque management)
· JAN code: 4571141278734
· Trusco code: 821-9167
· Mass: 0.24 kg› Jetzt konfigurierenab∗ ： 133.37 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Digitaler Drehmomentschlüssel, CTB2 / CTB2-G
TOHNICHI MFG
[Features]
· A torque wrench for the re-tightening inspection of tightened screws.
· Uses the Tohnichi original new additional tightening torque measurement algorithm "T-point method". (*PAT.PEND)
· The additional tightening torque can be measured without individual variability.
· 999 internal memory data events, output with RS232C.
· Head exchangeable type enables use of wrenches, ring wrenches, etc. to suit various purposes.
· Can be securely used in the EU region as well.
· ISO 6789 Type I Class C calibration procedure compliant.
[Applications]
· For additional tightening inspection.› Jetzt konfigurierenab∗ ： 2,845.09 € Minimum Lieferzeit ： 13 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 153.24 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehmomentschlüssel, Ausführung mit Voreinstellung (Ausführung mit Speichereinstellung)
MAEDAKINNZOKU
Dedicated torque wrench for tightening bolts and nuts.
[Features]
· A digital type with easy-to-see numerical display that drastically reduces errors in torque setting.
· In tightening work, when it reaches the set torque value, there will be a "clicking" sound or light "shock" to the hand.
· Unlike conventional types, there is no need to read the main scale and Vernier scale, so it is convenient for preventing setting errors and confirmation/management of tightening torque.
· Torque is set based on digitally displayed value of mechanical mechanisms which can be read directly.
· Torque can be set by inserting a hex L-shape wrench into a configuration thread component in the rear of the wrench.
[Applications]
· Ideal for assembly, maintenance, and inspection of places requiring torque setting, such as for ports, electrical facilities, automobiles, heavy machinery, aircraft, etc.
· Can be used for work ranging from assembly at industrial plants to maintenance of large trucks, automobiles, general industrial equipment and plants.
· Ideal for various torque management tightening work.› Jetzt konfigurierenab∗ ： 192.97 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Kraftschrauber
MAEDAKINNZOKU
Manual torque wrench with booster mechanism ideal for tightening/loosening hexagonal bolts/nuts.
[Features]
· Manual type so a power supply or air supply is not necessary. Protects the working environment as it doesn't generate noise or impact sounds.
· Capable of outputting approximately 3 times more power with low input torque thanks to its planetary gear mechanism.
· The power wrench does not allow input greater than maximum input torque.
[Applications]
· Assembly of machinery, foundation bolting, large chucking, die set installation.
· Maintenance, installation of temporary frames, as well as assembly and repair of steel tower foundation bolts.
· For attachment/detachment of wheel nuts of large vehicles, large bolts of construction machines and heavy machinery, and engine bolts of ships.
· Assembly repair of piping valves, flanges, and heat exchangers at various plants.› Jetzt konfigurierenab∗ ： 596.11 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehmomentschlüssel, Universal-Ausführung (Ausführung mit Direkteinstellung)
MAEDAKINNZOKU
Specialized monkey-type clamping torque wrench which does not damage the corners of bolts or nuts.
[Features]
· The lower jaw of the monkey wrench head part is better secured, and has a backlash-less worm function.
· Digital-type torque setting for easy identification of displayed value.
· In tightening work, when it reaches the set torque value, there will be a "clicking" sound or sensation to the hand.
· Can be adjusted to any required sizes, metric or inch, or to square or irregular shapes of nuts and bolts.
[Applications]
· For piping of air conditioners, etc. and torque tightening for automobiles and motorcycles.
· For optical fiber connector/exchanger mounting in communication facilities, as well as for anchor bolts on evacuation equipment in disaster prevention facilities, etc.
· Wide type ideal for tightening non-ferrous/plastic nuts, etc. at low torque.› Jetzt konfigurierenab∗ ： 295.56 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehmomentschlüssel, Ausführung mit Voreinstellung (Ausführung mit Direkteinstellung)
MAEDAKINNZOKU
Dedicated torque wrench for tightening bolts and nuts.
[Features]
· Digital-type torque setting for easy identification of displayed value.
· In tightening work, when it reaches the set torque value, there will be a "clicking" sound or a sensation to the hand.
· Unlike conventional types, there is no need to read the main scale and Vernier scale, so it is convenient for preventing setting errors and confirmation/management of tightening torque.
· Torque is set based on digitally displayed value of mechanical mechanisms which can be read directly.
[Applications]
· For assembly, maintenance, and inspection of places requiring torque setting, such as for ports, electrical facilities, automobiles, heavy machinery, aircraft, etc.› Jetzt konfigurierenab∗ ： 165.18 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Hochleistungskraftschrauber
MAEDAKINNZOKU
Manual wrench with a boost mechanism suitable for tightening/loosening large bolts and nuts.
[Features]
· Manual type so a power supply or air supply is not necessary.
· Exhibits significant power with low input torque thanks to its planetary gear mechanism.
· Protects the working environment as it doesn't generate noise or impact sounds.
[Applications]
· Ideal for assembly of machinery, foundation bolting, and large chucking.
· Convenient for mounting die sets, maintenance, mounting centering and foundation bolts for steel towers.
· Ideal for attachment/detachment of wheel nuts of large vehicles, large bolts of construction machines and heavy machinery, and engine bolts of ships.
· Convenient for assembly repair of piping valves, flanges, and heat exchangers at various plants.› Jetzt konfigurierenab∗ ： 7,493.89 € Minimum Lieferzeit ： 55 Arbeitstage *Stückpreis Standardkonfiguration
-
Handy Digitorque
MAEDAKINNZOKU
Digital torque measuring device.
[Features]
· Can be mounted between manual handles and sockets for use.
· When the set torque is reached, it will be announced by a buzzer sound, red LED light and LCD.
· Comes with a calibration certificate.
· Can be switched between two measurement modes (peak mode / track mode). Supports both clockwise and counterclockwise rotation.
· Equipped with a function to prevent overtorque by notifying the user with a sound of the buzzer (intermittent) when target torque is almost achieved.
· The buzzer can be set to start in a range between 50 and 95% of target torque.
[Applications]
· Various manufacturing industries such as industrial machinery, analytical instruments, automobiles. etc., and inspection.› Jetzt konfigurierenab∗ ： 99.69 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Ratschenschlüssel Digital (digitale Ausführung)
MAEDAKINNZOKU
Easy-to-use ratchet type digital torque wrench.
[Features]
· Digital torque display allows anyone to manage torque with ease without relying on their intuition.
· When the set torque is reached, it will be announced by an LED light, buzzer sound and LCD.
· Comes with a calibration certificate.
· The measured torque value can be transferred to a PC.
· Data storage: Up to 250 entries.
[Applications]
· Various manufacturing industries such as industrial machinery, analytical instruments, automobiles. etc., and inspection.› Jetzt konfigurierenab∗ ： 343.60 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Super-Drehmomentschlüssel
SUPER TOOL
[Features]
· The flare nut for use with new refrigerants is tightened at a suitable torque value. The tightening torque setting supports new refrigerants.
· Tightening is complete at the point when a "click" sound is made at the set torque› Jetzt konfigurierenab∗ ： 82.34 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehmomentschlüssel, Ausführung mit Voreinstellung
TOHNICHI MFG
[Features]
· A cost-saving torque wrench that can exchange heads according to the application, including wrenches, ring wrenches, ratchets, and hex heads, all with a single torque wrench.
· When the set torque is reached, the toggle operates, and a light, clear signal sound lets the user know when tightening is complete.
[Applications]
· For tightening various screws for assembly and mass production.› Jetzt konfigurierenab∗ ： 121.79 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Verstellbarer Kopf, AH2-Ausführung
TOHNICHI MFG
[Features]
· A bundle containing many interchangeable heads. The cost reduction is evident.
· Resolves at one stroke the torque management for a wide variety of width across flat dimensions.
[Applications]
· For tightening nuts for piping of hydraulic and pneumatic devices and air conditioners.› Jetzt konfigurierenab∗ ： 100.29 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Weiblicher Ratschenkopf, RQH
TOHNICHI MFG
[Features]
· The low tightening amplitude enables comfortable work in confined, height-restricted spaces.
· Female type.› Jetzt konfigurierenab∗ ： 104.65 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Sechskantkopf, HH-Ausführung
TOHNICHI MFG
[Features]
· HH-type hex head is a head for hex socket bolts. Can insert hex wrench.
· Replacement bits can be inserted in HH8D only (root part is 6.35 hex).› Jetzt konfigurierenab∗ ： 49.13 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Ringkopf, RH-Ausführung
TOHNICHI MFG
[Features]
· Because the bolt on the RH-type ring head is at a constant distance from the head center shaft, accurate tightening is possible.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 25.15 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Moto-Drehmoment
TOHNICHI MFG
[Features]
· Can also be used as a torque wrench by mounting commercially available tools.
· Capable of tightening an extensive range, from 10 to 70 N·m.
· Tire tightening is also possible by setting a wheel wrench.
[Applications]
· Motorcycles, general-use.
· For field work.› Jetzt konfigurierenab∗ ： 192.45 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
![Digirache [Memorque] Host-Modul-Satz für kabellose Übertragung](//content.misumi-ec.com/image/upload/f_auto,t_product_view_b/v1/p/jp/product/series/223005065609/223005065609_001.jpg)
Digirache [Memorque] Host-Modul-Satz für kabellose Übertragung
KTC(KYOTO TOOL)
[Features]
· Data can be transmitted to a PC via wireless network and measurement results can be recorded.
· Up to 200 data can be recorded on the main unit.
· Features a ring-shaped LED light easily identifiable from various angles, which notifies the user of torque status in 3 colors and sound.
[Applications]
· Data management of machinery assembly work
· Ideal for managing maintenance and inspection logs for various machinery and equipment.
· Research and experiment data management.› Jetzt konfigurierenab∗ ： 1,195.94 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
![Digirache [Memorque] (für kabellose Übertragung)](//content.misumi-ec.com/image/upload/f_auto,t_product_view_b/v1/p/jp/product/series/223005065610/223005065610_001.jpg)
Digirache [Memorque] (für kabellose Übertragung)
KTC(KYOTO TOOL)
[Features]
· Data can be transmitted to a PC via wireless network and measurement results can be recorded.
· Up to 200 data can be recorded on the main unit.
· Features a ring-shaped LED light easily identifiable from various angles, which notifies the user of torque status in 3 colors and sound.
[Applications]
· Data management of machinery assembly work
· Ideal for managing maintenance and inspection logs for various machinery and equipment.
· Research and experiment data management.› Jetzt konfigurierenab∗ ： 1,064.80 € Minimum Lieferzeit ： 16 Arbeitstage *Stückpreis Standardkonfiguration
-
Digirache (Ausführung mit austauschbarem Kopf)
KTC(KYOTO TOOL)
[Features]
· The fixed grip equipped with a power sensor allows even more accurate torque measurement, regardless of working posture or skill level.
· A replaceable-head type tool that increases potential uses even further, and that has the same great level of usability.
· Ease of use and customization functions for measurement mode and display mode, large and easy-to-see LED lamps.
· Max number of memory registration is 5 events.
· Measurement unit is N·m (can be changed to kgf·m, lbf·in, lbf·ft).
[Applications]
· For fastening and testing work.› Jetzt konfigurierenab∗ ： 207.75 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Digirache (Rollgabelschlüssel)
KTC(KYOTO TOOL)
[Features]
· Digital torque wrench that can be used like a monkey wrench.
· High-precision measurement is possible by adopting a dedicated head piece which does not change the effective length even if the opening dimensions change.
· Uses a fixed grip equipped with a power sensor, allowing highly accurate torque measurement regardless of the working orientation or proficiency level.
· Max number of memory registration is 5 events.
· Measurement unit is N·m (can be changed to kgf·m, lbf·in, lbf·ft).
[Applications]
· For general tightening work as well as research and inspections.
· For piping and the like where a socket wrench cannot be used.› Jetzt konfigurierenab∗ ： 321.62 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehmomentschlüssel mit Voreinstellung
KTC(KYOTO TOOL)
[Features]
· The torque value to be measured can be set in advance, so it is effective when working continuously or when it is difficult to read the scale.
· It has a lock mechanism for setting measurement values.
· Can be used for measurement of left torque as well as right torque.
· The head width is short, and can be used in places that could not be reached before.
· A rubber ring is attached on the bottom of the head part which increases the degree of sealing, reducing the incidence of failure and maintaining high accuracy.
[Applications]
· For general tightening tasks.› Jetzt konfigurierenab∗ ： 850.53 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Ratschenkopf
KTC(KYOTO TOOL)
[Features]
· Spare head for Digiratche.
[Applications]
· Replacement Head for GEK series.› Jetzt konfigurierenab∗ ： 49.04 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
![[Kanon] Drehmomentschlüssel mit Voreinstellung](http://de.misumi-ec.com/linked/material/fs/NKM1/PHOTO/N450QLK_3.jpg?$product_view_b$)
![[Kanon] Drehmomentschlüssel mit Messuhr](http://de.misumi-ec.com/linked/material/fs/NKM1/PHOTO/N-TOK.jpg?$product_view_b$)
![Digirache [Memorque] Host-Modul-Satz für kabellose Übertragung](http://content.misumi-ec.com/image/upload/f_auto,t_product_view_b/v1/p/jp/product/series/223005065609/223005065609_001.jpg)
![Digirache [Memorque] (für kabellose Übertragung)](http://content.misumi-ec.com/image/upload/f_auto,t_product_view_b/v1/p/jp/product/series/223005065610/223005065610_001.jpg)
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit |
| Spezifikationen |
| Product Type |
| Torque adjustment range(N·m) |
| Two-plane dimensions(mm) |
| Insertion Angle(mm) |
| Minimum graduation(N·m) |
| Head Replaceable |
| Replaceable Head Type |
| Overall Length(mm) |
| Load direction |
| Torque Precision(±%) |
| Head width(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | TOHNICHI MFG | TOHNICHI MFG | NAKAMURA MFG | TOHNICHI MFG | TOHNICHI MFG | TOHNICHI MFG | TOHNICHI MFG | TOHNICHI MFG | NAKAMURA MFG | NAKAMURA MFG | HAZET | GEDORE | MAEDAKINNZOKU | TOHNICHI MFG | TOHNICHI MFG | SROAD | MAEDAKINNZOKU | TOHNICHI MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | TOHNICHI MFG | TOHNICHI MFG | WERA | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | SUPER TOOL | TOHNICHI MFG | TOHNICHI MFG | TOHNICHI MFG | TOHNICHI MFG | TOHNICHI MFG | TOHNICHI MFG | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) |
| Artikelserie | Drehmomentschlüssel, Ausführung mit Voreinstellung (Direkteinstellungs- / Halte-Ausführung) | Kanon Isolierter Drehmoment-Schlüssel, Einzelfunktion, Ratschen-Ausführung, N-QSPK-CE-Ausführung | Kanon Drehmomentschlüssel mit Voreinstellung, Permanentmarkierung, N-MQLK-Ausführung | Drehmomentschlüssel, Ausführung mit Voreinstellung (Ausführung mit Speichereinstellung) | Drehmomentschlüssel, Universal-Ausführung (Ausführung mit Direkteinstellung) | Drehmomentschlüssel, Ausführung mit Voreinstellung (Ausführung mit Direkteinstellung) | Digirache [Memorque] Host-Modul-Satz für kabellose Übertragung | ||||||||||||||||||||||||||||||||||||||
| ab∗ | 119.82 € *Stückpreis Standardkonfiguration | 281.37 € *Stückpreis Standardkonfiguration | 320.54 € *Stückpreis Standardkonfiguration | 314.50 € *Stückpreis Standardkonfiguration | 162.33 € *Stückpreis Standardkonfiguration | 63.13 € *Stückpreis Standardkonfiguration | 176.18 € *Stückpreis Standardkonfiguration | 142.01 € *Stückpreis Standardkonfiguration | 153.08 € *Stückpreis Standardkonfiguration | 281.05 € *Stückpreis Standardkonfiguration | 164.37 € *Stückpreis Standardkonfiguration Mengenrabatt | 208.20 € *Stückpreis Standardkonfiguration Mengenrabatt | 222.77 € *Stückpreis Standardkonfiguration | 88.55 € *Stückpreis Standardkonfiguration | 96.89 € *Stückpreis Standardkonfiguration | 57.09 € *Stückpreis Standardkonfiguration | 72.66 € *Stückpreis Standardkonfiguration | 20.99 € *Stückpreis Standardkonfiguration | 153.63 € *Stückpreis Standardkonfiguration | 171.65 € *Stückpreis Standardkonfiguration | 227.96 € *Stückpreis Standardkonfiguration Mengenrabatt | 439.41 € *Stückpreis Standardkonfiguration | 133.37 € *Stückpreis Standardkonfiguration | 2,845.09 € *Stückpreis Standardkonfiguration | 153.24 € *Stückpreis Standardkonfiguration Mengenrabatt | 192.97 € *Stückpreis Standardkonfiguration | 596.11 € *Stückpreis Standardkonfiguration | 295.56 € *Stückpreis Standardkonfiguration | 165.18 € *Stückpreis Standardkonfiguration | 7,493.89 € *Stückpreis Standardkonfiguration | 99.69 € *Stückpreis Standardkonfiguration | 343.60 € *Stückpreis Standardkonfiguration | 82.34 € *Stückpreis Standardkonfiguration | 121.79 € *Stückpreis Standardkonfiguration | 100.29 € *Stückpreis Standardkonfiguration | 104.65 € *Stückpreis Standardkonfiguration | 49.13 € *Stückpreis Standardkonfiguration | 25.15 € *Stückpreis Standardkonfiguration Mengenrabatt | 192.45 € *Stückpreis Standardkonfiguration | 1,195.94 € *Stückpreis Standardkonfiguration | 1,064.80 € *Stückpreis Standardkonfiguration | 207.75 € *Stückpreis Standardkonfiguration | 321.62 € *Stückpreis Standardkonfiguration | 850.53 € *Stückpreis Standardkonfiguration | 49.04 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit | Versand am selben Tag | 6 Arbeitstage | 7 Arbeitstage | 6 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 45 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | 13 Arbeitstage | 4 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 55 Arbeitstage | 7 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 10 Arbeitstage | 16 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage |
| Spezifikationen |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Product Type | Vorgegebene Form | Drehmomentschlüsselprüfer | Messuhrausführung | Drehmomentschlüsselprüfer | Messuhrausführung | Austauschkopf | Messuhrausführung | Vorgegebene Form | Vorgegebene Form | Messuhrausführung | - | - | Digitale Ausführung | Sonstige | Vorgegebene Form | Vorgegebene Form | Einzelfunktionsausführung | Austauschkopf | Vorgegebene Form | Messuhrausführung | Affenausführung | Affenausführung | - | Digitale Ausführung | - | Digitale Ausführung | Sonstige | Digitale Ausführung | Digitale Ausführung | Sonstige | Digitale Ausführung | Digitale Ausführung | Einzelfunktionsausführung | Vorgegebene Form | Austauschkopf | Austauschkopf | Austauschkopf | Austauschkopf | Sonstige | Digitale Ausführung | Digitale Ausführung | Digitale Ausführung | Digitale Ausführung | Vorgegebene Form | Austauschkopf |
| Torque adjustment range(N·m) | 0.4~2 ～ 40.0～280.0 | 0.0005～0.0045 ～ 0.2 to 1.5 | 0.001～0.009 ～ 0.1～0.9 | 0.001～0.009 ～ 0.2 to 1.5 | 0.2 to 1.5 ～ 200～2100 | - | 0.2 to 1.5 ～ 200～2100 | 0.4~2 ～ 60.0～420.0 | 2 to 6 ～ 40～140 | 0.005~0.06 ～ 0.1~1.5 | - | - | 4–20 ～ 60～300 | 0.08～0.4 ～ 100~1000 | 0.4~2 ～ 40.0～280.0 | 5~25 ～ 42～210 | - | - | 20~100 | 1–12 | 7～25 ～ 20~100 | 10–50 ～ 40～140 | - | 170～850 | 2.5-25 ～ 60-300 | 10–50 ～ 40–200 | - | 3 to 15 ～ 50–150 | 1–6 ～ 60～300 | - | 10～135 ～ 20–200 | 6～30 ～ 40–200 | 16 | 3 to 15 ～ 60.0～420.0 | - | - | - | - | 10–70 | - | 2–30 | 8–40 | 40–200 | 150～800 | - |
| Two-plane dimensions(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5.5 ～ 60 | - | - | - | - | - | - | - | - | - | 10～27 ～ 27～48 | - | - | - | - | 17 | - | - | 14 ～ 24 | - | 5.5 ～ 60 | - | - | - | - | 10～36 | - | - |
| Insertion Angle(mm) | 6.35 ～ 19.05 | - | - | - | 6.35 ～ 25.4 | - | 6.35 ～ 25.4 | 6.35 ～ 19.05 | 6.35 ～ 12.7 | - | - | - | 9.5 ～ 19 | 6.35 ～ 25.4 | - | 6.35 ～ 12.7 | - | - | 12.7 | - | - | - | - | - | - | 9.5 ～ 12.7 | - | - | 6.35 ～ 19 | - | 9.5 ～ 12.7 | 6.35 ～ 12.7 | - | - | - | - | - | - | - | - | 9.5 | - | - | 19 | 6.3 ～ 12.7 |
| Minimum graduation(N·m) | 0.02 ～ 2 | 0.0001 ～ 0.02 | 0.0002 ～ 0.02 | 0.0002 ～ 0.02 | 0.02 ～ 20 | - | 0.02 ～ 20 | 0.02 ～ 2 | 0.1 ～ 1 | 0.001 ～ 0.02 | - | - | 0.2 ～ 2 | 0.02 ～ 20 | 0.02 ～ 2 | 0.5 ～ 2 | - | - | 1 | 0.2 | - | 0.5 ～ 1 | - | 1 | - | 0.5 ～ 2 | - | 0.2 ～ 2 | 0.1 ～ 2 | - | - | 0.3 ～ 5 | - | 0.1 ～ 2 | - | - | - | - | 0.2 | - | 0.01 | 0.05 | 0.2 | 5 | - |
| Head Replaceable | N/A | - | - | - | - | - | N/A | - | - | - | - | - | N/A | - | Verfügbar | N/A | N/A | - | N/A | N/A | N/A | N/A | - | Verfügbar | - | N/A | - | N/A | N/A | - | N/A | N/A | N/A | Verfügbar | - | - | - | - | - | - | - | Verfügbar | - | - | - |
| Replaceable Head Type | - | - | - | - | - | Ratschenkopf | - | - | - | - | - | - | - | - | - | - | - | Offener Kopf | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Einstellbarer Kopf | Ratschenkopfbuchse | Sechskant | Ringkopf | - | - | - | - | - | - | Ratschenkopf |
| Overall Length(mm) | 160 ～ 695 | 99 ～ 135 | 106 ～ 134 | 99 ～ 135 | 205 ～ 2140 | - | 205 ～ 2140 | 193 ～ 995 | 186 ～ 392 | 106 ～ 134 | - | - | 253 ～ 716 | 115 ～ 1640 | 140 ～ 655 | 275 ～ 465 | 220 ～ 292 | 35 ～ 160 | 352 | 260 | 232 ～ 352 | 254 ～ 392 | - | 1387 | 283 ～ 595 | 291 ～ 505 | - | 289 ～ 570 | 222 ～ 716 | - | 75 | 221 ～ 520 | 220 | 198 ～ 940 | - | - | - | 40 ～ 108 | 238 | - | 211 | 213 | 581.2 | 1050 | - |
| Load direction | Rechts | Links/rechts | - | Links/rechts | Links/rechts | - | Links/rechts | Rechts | - | - | - | - | Rechts | Links/rechts | Rechts | - | Links/rechts | - | - | - | - | - | - | Links/rechts | - | Rechts | Links/rechts | Links/rechts | Rechts | Links/rechts | Links/rechts | Links/rechts | - | Rechts | - | - | - | - | - | - | - | - | - | - | - |
| Torque Precision(±%) | 3 | 2 | 3 | 2 | 3 | 6.35 ～ 12.7 | 3 | 3 | 3 | 3 | - | - | 3 | 3 | 3 | - | 4 | - | 3 | 3 | 3 | 3 | - | 1 | - | 3 | - | 4 ～ 7 | 3 | - | 3 | 3 | - | 3 | - | - | - | - | 5 | - | - | - | - | 4 | - |
| Head width(mm) | - | - | - | - | - | 23 ～ 74 | - | - | - | - | - | - | 24 ～ 45.2 | - | - | - | - | - | - | - | - | - | - | - | - | 36 ～ 45.2 | - | 49.3 ～ 83.3 | 24 ～ 45.2 | - | - | 22.5 ～ 41 | - | - | - | 32 ～ 51 | 11 ～ 35 | - | - | - | - | - | 69 | - | - |
![[Kanon] Drehmomentschlüssel mit Voreinstellung](http://de.misumi-ec.com/linked/material/fs/NKM1/PHOTO/N450QLK_3.jpg?$product_view_c$)
![[Kanon] Drehmomentschlüssel mit Messuhr](http://de.misumi-ec.com/linked/material/fs/NKM1/PHOTO/N-TOK.jpg?$product_view_c$)
![Digirache [Memorque] Host-Modul-Satz für kabellose Übertragung](http://content.misumi-ec.com/image/upload/f_auto,t_product_view_c/v1/p/jp/product/series/223005065609/223005065609_001.jpg)
![Digirache [Memorque] (für kabellose Übertragung)](http://content.misumi-ec.com/image/upload/f_auto,t_product_view_c/v1/p/jp/product/series/223005065610/223005065610_001.jpg)
Loading...
Filtern nach:
Lagerbestand
-
- Nur Lagerteile anzeigen
-
Product Type
-
Torque adjustment range(N·m)
- 0.0005～0.0045
- 0.001～0.009
- 0.002～0.015
- 0.003～0.03
- 0.004～0.03
- 0.005~0.06
- 0.006～0.06
- 0.01～0.12
- 0.01～0.15
- 0.02～0.15
- 0.02～0.24
- 0.03～0.24
- 0.04～0.36
- 0.05～0.6
- 0.06～0.6
- 0.08～0.4
- 0.1~0.7
- 0.1～0.70
- 0.1～0.9
- 0.1~1.5
- 0.2 to 1.5
- 0.3～3.0
- 0.4~2
- 0.5～1.50
- 0.5～3
- 0.5~3.5
- 0.6～6
- 1–3
- 1–5
- 1–6
- 1–12
- 1.5～8
- 2 to 6
- 2 to 9
- 2–10
- 2～12
- 2–30
- 2.5-25
- 3~13
- 3 to 15
- 3～23
- 3～60
- 3.5～19
- 4 to 12
- 4–20
- 4~21
- 4～40
- 5~25
- 5.0～25.0
- 5~45
- 5～46
- 5.0～50.0
- 5–60
- 6～30
- 7～23
- 7～25
- 8～38
- 8–40
- 9～42
- 10-50
- 10～45
- 10–50
- 10.0～50.0
- 10–70
- 10–90
- 10～92
- 10~100
- 10.0～100.0
- 10～135
- 12～60
- 13～67
- 14～73
- 15–60
- 16
- 20-100
- 20~90
- 20~100
- 20.0～100.0
- 20~110
- 20~120
- 20～130
- 20.0 to 200.0
- 20–200
- 21～105
- 24～120
- 25-130
- 25～115
- 27～135
- 28～210
- 30~140
- 30.0～140.0
- 30～160
- 30～180
- 30~190
- 40-200
- 40～140
- 40~180
- 40–200
- 40.0～200.0
- 40～210
- 40.0～280.0
- 40～280
- 40.0～420.0
- 42～120
- 42～210
- 45～220
- 50–150
- 50～280
- 50.0～560.0
- 60-300
- 60～280
- 60～300
- 60.0～420.0
- 60～440
- 70～350
- 70～420
- 70.0～700.0
- 80～400
- 80～560
- 100.0～550.0
- 100～550
- 100～560
- 100~700
- 100～850
- 100.0～850.0
- 100~1000
- 100.0～1000.0
- 150.0～750.0
- 150～800
- 170～850
- 200.0～1000.0
- 200～1400
- 200～1500
- 200～2100
- 300.0～1400.0
- 500.0～2100.0
-
Two-plane dimensions(mm)
-
Insertion Angle(mm)
-
Minimum graduation(N·m)
-
Head Replaceable
-
Replaceable Head Type
-
Overall Length(mm)
- 19.0
- 20.5
- 23.4
- 25
- 35
- 40
- 41
- 42
- 43
- 44
- 45
- 50
- 52
- 53
- 54
- 55
- 55.8
- 56
- 57
- 58
- 59
- 61
- 62
- 63
- 64
- 65
- 66
- 68
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 82
- 84
- 91
- 94
- 95
- 96
- 98
- 99
- 100
- 101
- 102
- 105
- 106
- 108
- 115
- 125
- 132
- 134
- 135
- 140
- 145
- 152
- 160
- 161
- 170
- 173
- 173.5
- 174
- 175
- 186
- 190
- 193
- 195
- 197
- 198
- 200
- 203
- 205
- 208
- 211
- 213
- 216
- 218
- 220
- 221
- 222
- 225
- 228
- 229
- 230
- 232
- 235
- 237
- 238
- 248
- 250
- 252
- 253
- 254
- 256
- 260
- 264
- 268
- 273
- 275
- 282
- 283
- 285
- 286
- 289
- 290
- 291
- 292
- 295
- 298
- 303
- 308
- 310
- 319
- 320
- 325
- 330
- 335
- 338
- 342
- 343
- 346
- 348
- 352
- 353
- 355
- 360
- 365
- 369
- 370
- 372
- 380
- 386
- 387
- 388
- 389
- 390
- 392
- 397
- 400
- 403
- 404
- 405
- 410
- 420
- 421
- 435
- 438
- 440
- 441
- 442
- 443
- 445
- 449
- 450
- 455
- 457
- 465
- 467
- 478
- 480
- 483
- 487
- 489
- 490
- 500
- 505
- 510
- 520
- 526
- 543
- 555
- 565
- 570
- 581.2
- 585
- 587
- 595
- 597
- 607
- 648
- 655
- 695
- 716
- 825
- 853
- 890
- 908
- 940
- 945
- 995
- 1050
- 1051
- 1086
- 1100
- 1175
- 1178
- 1189
- 1206
- 1260
- 1267
- 1315
- 1342
- 1360
- 1387
- 1388
- 1410
- 1417
- 1490
- 1504
- 1515
- 1538
- 1640
- 1700
- 1740
- 1787
- 1895
- 2140
-
Load direction
-
Torque Precision(±%)
-
Head width(mm)
Marke
CAD Format
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Drehmomentschlüssel
-
- Ratschenschlüssel / Ringschlüssel / Schraubenschlüssel
- Steckschlüssel
- Dosensenker
- Innensechskantschlüssel
- Sechsrund-Schlüssel (TX/E)
- Schraubendreher
- Bits für Schraubendreher / Schraubendrehereinsätze
- Drehmomentschlüssel
- Drehmomentschrauber
- Blechbearbeitung
- Zangen / Kneifzangen / Pinzetten
- Universalschlüssel
- Werkzeuge für Wasserversorgungs-/Klimaleitungen
- Schneidwerkzeuge
- Isolierwerkzeuge
- Werkzeuge für Elektroanlagen
- Hämmer
- Meißel
- Gravierwerkzeuge/Stanzen
- Werkzeug-Sets/Werkzeugkästen
- Cutter, Rollschneider, Skalpellmesser
- Stemmeisen / Hebel
- Auszieher
- Pinzetten, Klemmen, Zangen
- Fahrzeug-Wartungswerkzeuge
- Stemmwerkzeuge
-
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.