• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Schraubendreher(Seite5)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 7 Tage oder weniger
  • 8 Tage oder weniger
  • 10 Tage oder weniger
  • Auto Tester (pencil type, buzzer and LED attached)

    Auto Tester (pencil type, buzzer and LED attached)

    ANEX

    [Features] As the long-life type LED is adopted, the presence or absence of the voltage of the automobiles and polarity can be understood immediately by sound and light.

    ab
    16.94€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Impact Screwdriver

    Impact Screwdriver

    ANEX

    When hitting with a hammer, the tip will turn around. It is quite useful when turning a rusted screw or fixed screw and so on.

    ab
    18.39€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Corner cut-off, round cut-off

    Corner cut-off, round cut-off

    SUNFLAG

    [Features] The shaft portion is made of special steels and finished with heat treatment. [Use] Eyeleteer, screw pilot hole, ice pick, marking work.

    ab
    9.77€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SUS Driver SPD-001

    SUS Driver SPD-001

    TONE

    The full stainless steel screwdriver adopts the sealed cavity structure in the grip portion, therefore, it is lighter than before.

    ab
    34.25€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Baby Screwdriver BBD-P00

    Baby Screwdriver BBD-P00

    TONE

    Round axis driver.

    ab
    3.23€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Screwdriver for vector electric works

    Screwdriver for vector electric works

    VESSEL

    Narrow shaft specification that can reach the narrow gap of terminal blocks (6.4 mm)

    ab
    9.56€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Micro Driver 3-piece Set

    Micro Driver 3-piece Set

    VESSEL

    2 types available to meet different needs in the precision field. Set of frequently used sizes. For adjustment and repair of precision devices, electronics, glasses, and watches. Includes a blister case that doubles as a storage case. (Made of PET)

    ab
    13.56€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • NO.TD-71 Plate Ratchet Driver

    NO.TD-71 Plate Ratchet Driver

    VESSEL

    A ratchet handle that is thin but also convenient in tight spaces.

    ab
    8.78€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • NO.TD-80 T-type Ratchet Driver Set

    NO.TD-80 T-type Ratchet Driver Set

    VESSEL

    Can fasten screws by repeated wrist movement without re-gripping the handle.

    ab
    11.22€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Craft Form Compact VDE

    Craft Form Compact VDE

    WERA

    1000 V insulation specifications. European standard EN60900 compliant product.

    ab
    6.90€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Craft Form Compact VDE

    Craft Form Compact VDE

    WERA

    1000 V insulation specifications. European standard EN60900 compliant product. It gives a sense of easy grip and fitness through the special grip.

    ab
    82.62€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • Craft Form Compact ESD Bit Holder Set

    Craft Form Compact ESD Bit Holder Set

    WERA

    The holder and Bit of nine types are stored in the compact card type case. Replacement of the Bit is simple through quick-release chuck function.

    ab
    65.74€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • Flexible Nut Driver

    Flexible Nut Driver

    WERA

    Flexible axis is ideal for working in narrow spaces.

    ab
    32.49€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ball Point Hexagon Screwdriver

    Ball Point Hexagon Screwdriver

    WERA

    The ball point tip can turn hexagon bolts, etc. even when the driver is somewhat tilted. It gives a sense of easy grip and fitness through the special grip.

    ab
    10.10€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • precision driver set (3 pieces per set)

    precision driver set (3 pieces per set)

    HIRAI KOGU

    [Features] The length of the 2 way-set axis can be adjusted continuously (18 ~ 100 mm). [Applications] -Turning precision screws. -Turning screws of watches and glasses.

    ab
    8.73€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Core Driver D-16-5

    Core Driver D-16-5

    HOZAN

    Ferrite core and semi-secure volume (with or without a knob) adjustment drivers. Made of high insulation and wear-resistant polyacetal. Does not damage the core or cause an adjustment misalignment.

    • Mengenrabatt
    ab
    2.25€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Replacement Screwdriver Set

    Replacement Screwdriver Set

    HOZAN

    Value set of 3 x drivers, each works for 2 sizes. Chuck case included.

    ab
    19.94€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 2WAY Ultra Slim Ratchet Driver

    2WAY Ultra Slim Ratchet Driver

    TRAD

    Double-head, straight and bent-nose. 18 mm ultra-thin head (bit included).

    ab
    11.94€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 8 in 1 Screwdriver Set

    8 in 1 Screwdriver Set

    TRAD

    Value set of 8 drivers. With plug grip that is easy to apply the force.

    ab
    9.65€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Pencil Type Spark-testing Screwdriver

    Pencil Type Spark-testing Screwdriver

    ANEX

    [Features] The presence or absence of voltages applied in homes or factories can be tested. The power supply condition can be obtained through buzzer and LED lamp.

    ab
    13.01€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Impact Screwdriver

    Impact Screwdriver

    ANEX

    [Features] When hitting with a hammer, the tip will turn around. It is quite useful when turning a rusted screw or fixed screw and so on. Opposite side 8mm hexagonal axis, head-bit support. [Applications] -For removing tight or rusted screws.

    ab
    55.29€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Compact Ratchet 52 (Straight Head)

    Compact Ratchet 52 (Straight Head)

    ANEX

    Ultra thin, 20 mm wide head. Gear with 52 teeth and a small lead angle for easily turning screws in narrow spaces. Ultra-short bit (total length 19 mm) is adopted.

    ab
    11.90€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Penetration Driver KPD-003

    Penetration Driver KPD-003

    TONE

    As the axis is of four-square shape, strong tightening is possible when combining the use of adjustable wrench and spanner. The tip is equipped with a strong magnet.

    ab
    9.71€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SUS Screwdriver Set SD8

    SUS Screwdriver Set SD8

    TONE

    The full stainless steel screwdriver adopts the sealed cavity structure in the grip portion, therefore, it is lighter than before. Comes with a cloth bag that can be stored compactly.

    ab
    179.92€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Go-through Screwdriver Set KD6

    Go-through Screwdriver Set KD6

    TONE

    As the axis is of four-square shape, strong tightening is possible when combining the use of adjustable wrench and spanner. The tip is equipped with a strong magnet.

    ab
    37.43€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Plastic Handle Screwdriver (Magnet Included)

    Plastic Handle Screwdriver (Magnet Included)

    TRUSCO NAKAYAMA

    Ball-shaped bottom of the grip makes rotation of screws easier.

    ab
    3.42€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Multi Driver

    Multi Driver

    TRUSCO NAKAYAMA

    Multi-purpose interchangeable driver with which electric bits can be used. Anti-slip cushion handle that is slip resistant even with gloves.

    ab
    7.71€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • T Handle Torx Screwdriver

    T Handle Torx Screwdriver

    VESSEL

    T-handle with which it is easy to apply force.

    ab
    9.69€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • NO.TD-53 Precision Hex Screwdriver

    NO.TD-53 Precision Hex Screwdriver

    VESSEL

    Stainless steel body (end cap part is resin). Assembly, repair, and disassembly of precision instruments, hobbies, etc.

    ab
    6.30€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • No.TD-800 Home-use Driver 8

    No.TD-800 Home-use Driver 8

    VESSEL

    Fits in the palm of the hand. Ergonomic Handle

    ab
    11.65€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Driver with S Hanger

    Driver with S Hanger

    VESSEL

    Basic hanger hook product. Select from Regular, Standard, Through-hole, Ball Grip, or Crystalline (Regular, Long Axis, Thin Axis, Precision, or Stubby Type)

    ab
    5.59€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Craft form Plus Chisel Driver

    Craft form Plus Chisel Driver

    WERA

    [Features] -Shock resistant through-hole driver. The bolster that can be tightened strongly with spanner is attached. It gives a sense of easy grip and fitness through the special grip.

    ab
    11.34€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • T Type Handle Rapid Adapter

    T Type Handle Rapid Adapter

    WERA

    [Features] This is the adapter handle of pistol type. It is possible to replace the Bit easily with one hand.

    ab
    32.66€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Craft form Compact VARIO

    Craft form Compact VARIO

    WERA

    Double-edged combination blade.

    ab
    13.93€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Torx Plus R Screwdriver

    Torx Plus R Screwdriver

    WERA

    The TORX-Plus-R has a larger surface area and better torque conductivity than the TORX-R.

    ab
    15.58€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Rubber Grip Screwdriver (Magnet Included)

    Rubber Grip Screwdriver (Magnet Included)

    HIRAI KOGU

    [Features] It is a rubber grip with strength that can produce a superior clamping force. As the shank of (Phillips) No.2 x 100, (-) 3 x 100 is processed with knurling, it can turn quickly and can be worked as a simple file as well.

    ab
    5.57€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • L-shape Driver

    L-shape Driver

    HIRAI KOGU

    Bent at 20 mm below the neck, final tightening is possible in narrow corners and crowded spaces where a conventional driver cannot reach. Axis is treated with entirely quenched black point and has a magnet.

    ab
    6.94€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Replaceable Stubby Screwdriver

    Replaceable Stubby Screwdriver

    HOZAN

    Driver, ideal for working in limited spaced.

    ab
    6.19€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Core Screwdriver D-16-4B

    Core Screwdriver D-16-4B

    HOZAN

    Ferrite core and semi-secure volume (with or without a knob) adjustment drivers. Made of high insulation and wear-resistant polyacetal. Does not damage the core or cause an adjustment misalignment.

    • Mengenrabatt
    ab
    3.83€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Replacement Screwdriver

    Replacement Screwdriver

    HOZAN

    1 driver for 2 sizes.

    • Mengenrabatt
    ab
    5.94€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Attack Driver Set

    Attack Driver Set

    KO-KEN TOOL

    [Features] The cam part is subjected to a hard heat treatment in order to improve the wear resistance. The head portion can be a little soft so as to prevent the cracking of the body due to striking. Once the bit holder is removed, it becomes an insertion angle of 7mm, therefore, the general-purpose socket also can be used.

    ab
    56.04€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Resin handle screwdriver long round shaft

    Resin handle screwdriver long round shaft

    KTC(KYOTO TOOL)

    [Features] It is a hand-friendly resin grip with elasticity. The shaft is of round type. [Applications] - General-purpose Tools

    ab
    15.98€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Resin handle stubby screwdriver

    Resin handle stubby screwdriver

    KTC(KYOTO TOOL)

    [Features] It is a resin grip of square shape easy to apply force. The shaft is of hexagonal shape. [Applications] - General-purpose Tools

    ab
    5.70€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ratchet Screwdriver

    Ratchet Screwdriver

    KTC(KYOTO TOOL)

    [Features] With the ratchet mechanism, you can fast forward in tightening or loosening of screws. By fixing the ratchet, you can also use it as a normal driver. It can accommodate 2-axis, 6 grip end and 8-bit. [Applications] - General-purpose Tools

    ab
    38.64€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Split Shaft Driver (Penetrating)

    Split Shaft Driver (Penetrating)

    ANEX

    [Features] It is suitable for works such as spot welding stripping, tile stripping, deburring and concrete chipping. It is a wide grip end that can prevent slippage of the hand during the hammering.

    ab
    21.65€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen