• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Schraubendreher(Seite6)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 7 Tage oder weniger
  • 8 Tage oder weniger
  • 10 Tage oder weniger
  • Electroscopic Auto Tester (pencil type)

    Electroscopic Auto Tester (pencil type)

    ANEX

    [Features] As the luminous bulb is incorporated, the presence or absence of voltage can be understood easily.

    ab
    6.63€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Flexible Shaft

    Flexible Shaft

    ANEX

    [Features] Most suitable for the screw tightening of corners, such as angles or edges.

    ab
    16.78€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Quick Electric Work Screwdriver (Magnet Included)

    Quick Electric Work Screwdriver (Magnet Included)

    ANEX

    One-step smaller handle. The angle fastened by 1 rotation is large, improving productivity. Insulated.

    ab
    5.06€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Quick Turn Driver

    Quick Turn Driver

    ANEX

    Turn while pushing down with the spinning cap. Steel ball for turning the cap smoothly. Elastomer grip.

    ab
    6.68€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Sandra Phillips Head Screwdriver (W Socket)

    Sandra Phillips Head Screwdriver (W Socket)

    SANGAKO

    + The Phillips screwdriver and box socket of 8 mm and 10 mm need no replacement, and use by 1 piece is possible. The elastomer handle portion grip improves the grip force. As the core part of the handle is made of strong polycarbonate, it is also OK to be used as a hammer for striking. Strong magnet incorporated.

    ab
    20.22€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Spark-testing Screwdriver (LED included, pencil-type)

    Spark-testing Screwdriver (LED included, pencil-type)

    SUNFLAG

    [Features] It can confirm the current conduction of wirings in the factory and general households. The high-brightness light-emitting LED that is easy to see is attached. The safe protection cap is attached. [Applications] -Checking wire insulation for tears or inspecting plugs.

    ab
    5.90€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SUS Screwdriver Set SUD8

    SUS Screwdriver Set SUD8

    TONE

    For Tightening And Loosening Screws

    ab
    97.80€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Stubby Screwdriver SD-M

    Stubby Screwdriver SD-M

    TONE

    Short body, ideal for working in narrow spaces.

    ab
    4.96€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Nut Driver Set (Deep Type)

    Nut Driver Set (Deep Type)

    TONE

    Driver type for attaching and removing hexagon bolts and nuts. Ideal for working in deep, narrow spaces.

    ab
    29.26€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ratchet Screwdriver Set RDS32

    Ratchet Screwdriver Set RDS32

    TONE

    Complete set including standard and stubby handles, 3-size interchangeable bit holders, and frequently used 32 x bits.

    ab
    111.94€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Magazine Handle Bit Screwdriver (Magnet Included)

    Magazine Handle Bit Screwdriver (Magnet Included)

    TRUSCO NAKAYAMA

    [Features] -Promotes smooth and pleasant operation with the magnet keeping the inside secure. - GS mark certified ergonomic design spec handle is easy on hands and keeps the user from getting tired easily. -Removable hexagon axis adapter can be inserted to electric drivers. -1 unit works for 8 sizes. - The unit head portion is made with opening and closing magnet cap specifications, and can store 7 bits.

    ab
    24.56€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Radial Ball Grip Replaceable Screwdriver (Supports 4 Sizes, Magnetic Tip)

    Radial Ball Grip Replaceable Screwdriver (Supports 4 Sizes, Magnetic Tip)

    TRUSCO NAKAYAMA

    [Features] -1 unit works for 4 sizes ((-) 6, (+) No. 1, (+) No. 2, and (+) No. 3). -Radial grip that is slip-resistant even in oily hands. -Large and strong ball cushion grip that produces much fastening force.

    ab
    6.56€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • T Bar Handle

    T Bar Handle

    TRUSCO NAKAYAMA

    [Features] -T-handle can tighten strongly for final tightening. -The handle slides horizontally and works in narrow spaces. -Long Joint (TLE-200/300) can be connected. [Applications] -Assembly and disassembly of machinery, equipment maintenance, factory work, and automotive maintenance.

    ab
    12.15€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Offset Ratchet Driver

    Offset Ratchet Driver

    TRUSCO NAKAYAMA

    [Features] -Ratchet mechanism makes quick rotation in narrow spaces possible. [Applications] -Removing screws in narrow spaces.

    ab
    7.37€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ball Point Screwdriver

    Ball Point Screwdriver

    TRUSCO NAKAYAMA

    [Features] It allows tightening even from a slant of about 25 ° by ball point shape.

    ab
    4.10€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Screwdriver Set

    Screwdriver Set

    TRUSCO NAKAYAMA

    Set of frequently used standard type drivers.

    ab
    7.34€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Impact Screwdriver

    Impact Screwdriver

    VESSEL

    Switches between left and right side by one-touch operation.

    ab
    54.31€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Flag-shape Handle Torx Driver

    Flag-shape Handle Torx Driver

    VESSEL

    Handle sizes designed according to the fastening torque of clamp screws. Use the small diameter part for quick rotation.

    ab
    8.26€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Screwdriver, etc.

    Screwdriver, etc.

    VESSEL

    Mini Stubby Driver and Cushion 4-way Star Bit Driver

    ab
    10.08€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • PETADORA L Offset Screwdriver NO. TD-63

    PETADORA L Offset Screwdriver NO. TD-63

    VESSEL

    Chrome-vanadium steel that is completely tempered. Champagne gold plating to keep the accuracy of the cutting edge.

    ab
    6.75€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • NO.TX-12MC Plate Ratchet Screw Catch (Torx)

    NO.TX-12MC Plate Ratchet Screw Catch (Torx)

    VESSEL

    Magnet for attracting and keeping screws from falling off and being lost. Bits work with tamper proof screws. Ball Locking. The 6.35 mm hex interface short bit and the 6.35 mm square interface socket can be used.

    ab
    15.57€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • NO.TD-73MC Plate Ratchet Screw Catch

    NO.TD-73MC Plate Ratchet Screw Catch

    VESSEL

    Magnetic vis catch that holds screws securely. Set including hex screw bit and Phillips bit used for furniture assembly or bicycles.

    ab
    11.62€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • NO.TD-54 Pin Extractor for Watch Straps

    NO.TD-54 Pin Extractor for Watch Straps

    VESSEL

    For adjusting the length of a metal watch band.

    ab
    6.30€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Tamper-proof TORX Micro Driver

    Tamper-proof TORX Micro Driver

    WERA

    [Features] Compatible with the tamper-proof TORX R screw. It adopted the ergonomic handle that is based on ergonomics, and is easy to hold and rotate. In addition, the torque can be transmitted securely.

    ab
    10.95€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hexagonal Bar Driver

    Hexagonal Bar Driver

    WERA

    [Features] Wera's independently developed Hex-Plus surface contact structure means the inner sides of hex screws aren't scratched, improving the longevity of the screws. High torque transfer rate for increased work efficiency. It gives a sense of easy grip and fitness through the special grip.

    ab
    7.25€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Craft Form Compact VARIO Handle

    Craft Form Compact VARIO Handle

    WERA

    Handle for insertion blades.

    ab
    19.53€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Craft Form Compact 27RA Set

    Craft Form Compact 27RA Set

    WERA

    The middle section opens up when the tail section is pressed for allowing the bit inside to be switched.

    ab
    84.49€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Detachable Porcelain "Werastar"

    Detachable Porcelain "Werastar"

    WERA

    Simple magnetize device for drivers. Rub a driver on the top for a few times to magnetize, and on the side for a few times to demagnetize. Magnetization and demagnetization of tools.

    ab
    19.45€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Adjustment Cushion Ratchet (Magnet Included)

    Adjustment Cushion Ratchet (Magnet Included)

    HIRAI KOGU

    [Features] As the shaft can be adjusted continuously with a minimum of 80mm and maximum of 150 mm, it is best suited for attachment and detachment of screws at deep places. As various bits are stored in the end part of dedicated holders, it is difficult to lose. It can turn hex socket head cap bolt and most of the screws such as hex lobe screws and Phillips screws. The ratchet mechanism is attached.

    ab
    27.63€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hook tool (hook type)

    Hook tool (hook type)

    HIRAI KOGU

    [Features] As the tip part is bended into hook type, it is convenient for a variety of applications such as removal of debris and the withdrawal of hoses. [Applications] -For pulling hoses that are used in cars, etc., machinery maintenance, or removing impurities.

    ab
    8.75€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Impact Screwdriver

    Impact Screwdriver

    HOZAN

    Strike to get screws that do not loosen to turn. When struck with a hummer, high torque turns the driver bit and loosens rusted screws easily. Protective grip with flange for protecting hands that hold. Once the bit holder is removed, a 12.7 mm drive socket can be attached. Interchangeable clockwise and counter-clockwise orientations.

    • Mengenrabatt
    ab
    75.03€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Replaceable Ceramic Adjustment Screwdriver D-280

    Replaceable Ceramic Adjustment Screwdriver D-280

    HOZAN

    Ideal for adjusting semi-secure volume condensers on P.C.B. Zirconia ceramic does not cause misalignment of coils. More wear-resistant than alumina ceramic.

    • Mengenrabatt
    ab
    52.04€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Adjustable Screwdriver

    Adjustable Screwdriver

    HOZAN

    Adjustment driver with a metal chip only at the tip to eliminate adjustment errors. Can be used for chip models (surface mounting type).

    • Mengenrabatt
    ab
    3.94€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • LED Driver Electroscopic D-745

    LED Driver Electroscopic D-745

    HOZAN

    For AC polarity tests and electric conduction checks.

    ab
    8.56€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Baby screwdriver

    Baby screwdriver

    KTC(KYOTO TOOL)

    [Features] The resin grip is solid, durable and is hard for dirt to attach. The shaft is of round type. [Applications] - General-purpose Tools

    ab
    2.67€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Resin handle mini stubby screwdriver

    Resin handle mini stubby screwdriver

    KTC(KYOTO TOOL)

    [Features] It is convenient for attaching or detaching at narrow places. The material of the shaft is SWRH62A. [Applications] - General-purpose Tools

    ab
    5.11€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Resin Handle Screwdriver (Penetration, Magnet Included)

    Resin Handle Screwdriver (Penetration, Magnet Included)

    KTC(KYOTO TOOL)

    [Features] The resin grip is solid, durable and is hard for dirt to attach. The shaft is of round type. - Penetrating type. The material of the shaft is CR-V. [Applications] - General-purpose Tools

    ab
    8.81€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wooden Screwdriver (Penetration, Magnet Included)

    Wooden Screwdriver (Penetration, Magnet Included)

    KTC(KYOTO TOOL)

    [Features] It is the hand-friendly grip made of natural wood. The shaft is of round type. The material of the shaft is CR-V. -Magnet is attached to the end. [Applications] - General-purpose Tools

    ab
    7.30€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Micro Impact Screwdriver Set (7 Pcs)

    Micro Impact Screwdriver Set (7 Pcs)

    TRAD

    Ideal for tightening and loosening of head-crushed and rusted screws. Since the torque is out by hitting it with a hammer, it can be used for detailed work such as attaching the bolts and the screws

    ab
    13.08€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Stainless Steel Luminous Screwdriver (Magnet Incorporated)

    Stainless Steel Luminous Screwdriver (Magnet Incorporated)

    ANEX

    [Features] It uses a special luminous resin that emits light in a dark place. The driver will be found immediately even in the dark. (A 24-hour luminous effect in 10 minutes direct sunlight irradiation) martensite type special stainless steel (high-strength stainless steel (550)).

    ab
    7.27€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Super Fit ACR Penetrating Driver (Magnet Included)

    Super Fit ACR Penetrating Driver (Magnet Included)

    ANEX

    [Features] The tip shape has a structure that is hard to cam-out, (Phillips point: ACRR, slotted point: notch attached), and can prevent the cutting edge being lifted from the screw. With the hex bolster, you can apply the wrench with a stronger force to make the turn.

    ab
    10.18€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Stainless Steel Luminous Screwdriver (Stubby Type, Magnet Incorporated)

    Stainless Steel Luminous Screwdriver (Stubby Type, Magnet Incorporated)

    ANEX

    [Features] It uses a special luminous resin that emits light in a dark place. The driver will be found immediately even in the dark. (A 24-hour luminous effect in 10 minutes direct sunlight irradiation) martensite type special stainless steel (high-strength stainless steel (550)).

    ab
    5.71€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Super Fit Two-end Precision Replacing Screwdriver

    Super Fit Two-end Precision Replacing Screwdriver

    ANEX

    [Features] The elastomer resin handle is strong type.

    ab
    17.22€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Super Fit Two-end Precision Replacing Hex Lobe Screwdriver

    Super Fit Two-end Precision Replacing Hex Lobe Screwdriver

    ANEX

    [Features] The elastomer resin handle is strong type.

    ab
    17.86€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Pencil Type LED Auto Tester

    Pencil Type LED Auto Tester

    ANEX

    [Features] As the long-life type LED is adopted, the presence or absence of the voltage of the automobiles can be tested easily. With large alligator grip. Because it does not affect the electronic devices, it can make its best application at automobiles equipped with electronic equipment.

    ab
    10.03€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen