• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Hämmer(Seite5)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 8 Tage oder weniger
  • FERROPLEX-Kombihammer, Schlosser- und Schonhammer in Einem

    FERROPLEX-Kombihammer, Schlosser- und Schonhammer in Einem

    Erwin Halder

    Anwendungsgebiete Allgemeine Montagearbeiten in Industrie, Handwerk und Kfz-Bereich, Wartungs- und Instandhaltungsarbeiten   Mit Stahlrohrstiel und ergonomisch geformtem Gummigriff, Hammerkopf aus hochwertigem Vergütungsstahl, einseitig induktiv gehärtet, Gegenseite mit austauschbarem Nylon-Schlageinsatz

    • Mengenrabatt
    ab
    21.42€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SIMPLEX-Schonhämmer, mit verstärktem Stahlgussgehäuse und Fiberglasstiel
    ab
    20.16€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SIMPLEX-Vorschlaghammer, mit verstärktem Stahlgussgehäuse und Fiberglasstiel
    ab
    90.00€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SIMPLEX-Schonhämmer, 50 zu 40

    SIMPLEX-Schonhämmer, 50 zu 40

    Erwin Halder

    Die überdimensionalen Schlagflächen ermöglichen einen maximalen Schutz für gefühlvolles Bearbeiten von Werkstücken mit empfindlichen Oberflächen.

    • Mengenrabatt
    ab
    20.16€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SIMPLEX-Einsatz 50 zu 40

    SIMPLEX-Einsatz 50 zu 40

    Erwin Halder

    • Mengenrabatt
    ab
    5.30€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • BASEPLEX-Einsatz

    BASEPLEX-Einsatz

    Erwin Halder

    Anwendungsgebiete: Blechbearbeitung, Montage-/Reparaturarbeiten im Kfz-/Nfz-Bereich, Wartung / Reparatur / Instandhaltung

    • Mengenrabatt
    ab
    1.52€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • BASEPLEX-Stiel, für BASEPLEX-Schonhämmer

    BASEPLEX-Stiel, für BASEPLEX-Schonhämmer

    Erwin Halder

    Ergonomisch geformt, lackiert

    • Mengenrabatt
    ab
    2.31€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Stainless one-handed hammer

    Stainless one-handed hammer

    OHINDUSTRIAL

    [Features] It is a stainless forging. [Applications] - Machine repair in places sensitive to iron rust such as food related places or nuclear power plants.

    ab
    51.90€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • LightOn stainless hammer

    LightOn stainless hammer

    OHINDUSTRIAL

    [Features] It is all stainless-made for both head and handle. - The double-molded polypropylene handle fits close to the hand for easy grip. [Applications] For food factories and clean rooms.

    ab
    81.34€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Stainless Soft Hammer

    Stainless Soft Hammer

    OHINDUSTRIAL

    [Features] The handle is of hollow structure that is easy to swing. - The head is made of polyethylene resin conforming with the food sanitation act. [Applications] For food factories and clean rooms.

    ab
    142.08€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Replacement Head for stainless soft hammer

    Replacement Head for stainless soft hammer

    OHINDUSTRIAL

    The material is polyethylene (a food sanitation act conforming product).

    ab
    9.42€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Set W hammer

    Set W hammer

    OHINDUSTRIAL

    [Features] It is most suitable for the general masonry work, stone-cutting and chipping operations. [Applications] For general construction work.

    ab
    19.25€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Steel wooden frame hammer

    Steel wooden frame hammer

    OHINDUSTRIAL

    [Features] - A special hardened steel pipe very strong in bending or breaking is used. - There are 2 types of striking surfaces, 1 with a slip stopper and 1 without. - Tempering hardness is HRC50 to 55 for the striking part and HRC45 to 50 for the nail puller part. [Applications] - For general construction work.

    ab
    17.79€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • G Wooden-frame hammer

    G Wooden-frame hammer

    OHINDUSTRIAL

    [Features] With the glass fiber handle, there is less possibility of broken handle even in harsh operating conditions. There are 2 types of striking surfaces, 1 with a slip stopper and 1 without. Tempering hardness is HRC50 to 55 for the striking part and HRC45 to 50 for the nail puller part. [Applications] For general construction work.

    ab
    26.77€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Green electrician wrench hammer

    Green electrician wrench hammer

    OHINDUSTRIAL

    [Features] It is a budget design that is short and lightweight. It is a grip design that fits nicely in the hand. - A 17 mm box wrench is integrated in the base of the handle. [Use] Ideal for electrical work.

    ab
    35.20€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wooden handle for plastic hammer

    Wooden handle for plastic hammer

    OHINDUSTRIAL

    The material is oak.

    ab
    6.80€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wooden handle for test

    Wooden handle for test

    OHINDUSTRIAL

    The material is oak.

    ab
    8.79€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wooden handle for Combi hammer

    Wooden handle for Combi hammer

    OHINDUSTRIAL

    The material is oak.

    ab
    7.10€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wooden Handle for Combi Shock Hammer

    Wooden Handle for Combi Shock Hammer

    OHINDUSTRIAL

    The material is oak.

    ab
    9.86€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wooden handle for chaplet

    Wooden handle for chaplet

    OHINDUSTRIAL

    The material is oak.

    ab
    6.31€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wooden handle for slag cleaning

    Wooden handle for slag cleaning

    OHINDUSTRIAL

    The material is oak.

    ab
    6.20€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hand wooden maul

    Hand wooden maul

    TOMBO INDUSTRY

    [Features] Carefully selected Japanese evergreen oak materials are used. [Applications] - Piling or demolition work.

    ab
    18.94€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • One-Handed Hammer (Combined Model)

    One-Handed Hammer (Combined Model)

    TRUSCO NAKAYAMA

    [Features] Uses a TPR resin grip which reduces pain during work by absorbing vibration. • Compared to wooden handles, it has specifications that keep it from slipping easily, and that keep the user from getting tired. [Applications] • For general ironworking. • For driving stamps, marks and punches.

    ab
    32.67€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Ball Pin Shockless Hammer

    Ball Pin Shockless Hammer

    TRUSCO NAKAYAMA

    [Features] - Strikes can be flexibly controlled providing high impact power but little repelling power when striking to enhance work efficiency and safety and prevent tiredness. - Since special steel is integrally molded with urethane and then can be used with ease without head falling. [Applications] - A wide range of casting / ironwork. - Driving stamps, marks and punches.

    ab
    57.96€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • Nail Hammer

    Nail Hammer

    TRUSCO NAKAYAMA

    [Features] The iron flat surface of the head part can be used for nailing and the other side can be used for pulling out nails. • The unit is a shock resistant, integrally molded plastic piece. No need to worry for the hammer head to drop off. • A non-slip elastomer resin is used in this impact vibration-absorbing new structure handle. The head can not be replaced. • Due to the steel core material, it realizes durability that is 3 times that of a wooden handle. The head part is special steel that is completely tempered and whose durability is significantly improved. • An easy-to-use design based on human engineering. [Applications] Used in precision work and for the assembly of wooden products, etc.

    ab
    12.84€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Replaceable Head Hammer Set (Mini Type)

    Replaceable Head Hammer Set (Mini Type)

    TRUSCO NAKAYAMA

    [Features] - Special steel is integrally molded with plastic and then prevents the hammer head from dropping off. - The handle is made of elastomer resin and then easy to use. [Applications] - Used in precision work and for the assembly of wooden products, etc.

    ab
    13.30€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Replaceable Head Hammer Set (Mini Type) Replacement Head

    Replaceable Head Hammer Set (Mini Type) Replacement Head

    TRUSCO NAKAYAMA

    3 nylon heads for mini-head replacement hammers are included. Head 14

    ab
    4.78€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Urethane Soft Hammer Replacement Head

    Urethane Soft Hammer Replacement Head [2 Stk. pro Packung]

    TRUSCO NAKAYAMA

    4 types of head diameter, 26, 32, 38 and 42, are available

    ab
    5.26€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Pincer Hammer (Wooden Handle)

    Pincer Hammer (Wooden Handle)

    TRUSCO NAKAYAMA

    [Features] • The head part is completely tempered (hardness is 45 to 55 degrees). The handle is also lighter and more durable than oak, and uses a flexible hickory. [Applications] • For hammering and removing nails, and other general carpentry work.

    ab
    10.85€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Pincer Hammer (Carbon Fiber Handle)

    Pincer Hammer (Carbon Fiber Handle)

    TRUSCO NAKAYAMA

    [Features] - Lightness is achieved by adopting a lightweight and durable carbon fiber handle often used for sports equipment. - Features a handle made of a material hard to slip. - The head part has been completely tempered.

    ab
    22.57€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wooden Handle for Chaplet Hammer (with Wedge)

    Wooden Handle for Chaplet Hammer (with Wedge)

    TRUSCO NAKAYAMA

    [Features] - Uses hickory which is lighter, more durable and elastic than oak.

    ab
    6.06€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wooden Handle for Sheet Metal Hammer (with Wedge)

    Wooden Handle for Sheet Metal Hammer (with Wedge)

    TRUSCO NAKAYAMA

    TRUSCO, Sheet Metal Hammers for TSM, Wooden Handle, with Wedges

    ab
    10.27€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Micro Dual Opening Hammer (Mini Type) Replacement Head

    Micro Dual Opening Hammer (Mini Type) Replacement Head

    TRUSCO NAKAYAMA

    Trusco made For Micro Both hammer exchange head

    ab
    4.34€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Replacement Tip for Plastic Hammer 70110

    Replacement Tip for Plastic Hammer 70110

    VESSEL

    Made of flexible and tough plastics, with no damage to the workpiece

    ab
    8.94€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Replacement Tip for Plastic Hammer 70115

    Replacement Tip for Plastic Hammer 70115 [2 Stk. pro Packung]

    VESSEL

    Made of flexible and tough plastics, with no damage to the workpiece

    ab
    10.72€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Dual Head Soft Hammer

    Dual Head Soft Hammer

    CUSTOM KOBO

    Ideal for assembling furniture / wooden products or mounting type plates / rectangular lumbers, etc.

    • Mengenrabatt
    ab
    14.77€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Shockless Plastic Hammer

    Shockless Plastic Hammer

    CUSTOM KOBO

    To be used for objects which should not be damaged.

    • Mengenrabatt
    ab
    21.23€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Dual Head Hammer Handle

    Dual Head Hammer Handle

    CUSTOM KOBO

    A hammer grip for double-handed hammer 2.7 / 3.6 / 4.5 kg.

    • Mengenrabatt
    ab
    16.80€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Component Hammer

    Component Hammer

    KTC(KYOTO TOOL)

    [Features] It is molded with excellent safety (urethane resin). - Excellent in durability and then work can be done quietly without noise. - Has a shock-less structure to reduce hand burden. [Applications] - General-purpose Tools

    ab
    86.11€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Head for plastic hammer, Combi hammer & plastic hammer

    Head for plastic hammer, Combi hammer & plastic hammer

    KTC(KYOTO TOOL)

    [Features] It is a head replacement for plastic hammer. - A replacement head for UD3-10. [Applications] - A general-purpose tool.

    ab
    5.40€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Carpenter's mallet

    Carpenter's mallet

    MORIMITSU

    [Features] Unlikely to scratch workpiece. It can be used in processing of general sheet metals, including bending and crushing. [Applications] - It can be used in processing of general sheet metals, including bending, crushing, etc.

    ab
    16.92€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen