• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Diamantschneider(Seite2)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • 8 Tage oder weniger
  • 9 Tage oder weniger
  • 10 Tage oder weniger
  • 32 Tage oder weniger
  • Dry thunder

    Dry thunder

    RIKEN DIAMOND INDUSTRY

    It is a high grade product of cross-coupling type.

    ab
    120.83€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Dry Hand Cutter ST

    Dry Hand Cutter ST

    RIKEN DIAMOND INDUSTRY

    It is a product aiming at markets such as the rental agencies that require a balance of performance and price.

    ab
    145.75€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Segment for joint

    Segment for joint

    RIKEN DIAMOND INDUSTRY

    For joint case of concrete surface.

    ab
    123.92€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wet Type Road Cutter

    Wet Type Road Cutter

    RIKEN DIAMOND INDUSTRY

    Taking account of the balance of performance and price, the blade can be used both in concrete and asphalt cutting with the latter as the main emphasis. Intended for general users and rental traders.

    ab
    145.75€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Dry Surfacer Ace DX

    Dry Surfacer Ace DX

    SANKYO DIAMOND INDUSTRIAL

    Grinding of concrete, brick, block and stone. With a reasonable price, ideal for minor tasks

    ab
    82.41€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • Sharp Cut (M Green)

    Sharp Cut (M Green)

    SANKYO DIAMOND INDUSTRIAL

    Cutting of tiles. Cutter that's suitable for cutting various tiles.

    ab
    53.98€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SD Protect MARK II

    SD Protect MARK II

    SANKYO DIAMOND INDUSTRIAL

    Cutting of concrete products in general, reinforced concrete, tile, brick, block, mortar and ALC. Medium bore diameter blade for the famous SD cutter.

    ab
    188.92€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Cutter (Mr.Tile)

    Cutter (Mr.Tile)

    SANKYO DIAMOND INDUSTRIAL

    Cutting of tiles. Suitable for the cutting of thick materials and large tiles. It demonstrates excellent sharpness for tiles in general, and has the performance that withstands continuous work.

    ab
    66.74€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • Sankyo Laser Turbo 8X

    Sankyo Laser Turbo 8X

    SANKYO DIAMOND INDUSTRIAL

    Ideal for cutting concrete and granite. Enhanced safety. Laser welding: the junction of tips and substrates are strengthened by laser welding. Hardened substrate: the strength is improved by adopting the heat-treated substrate. Improved sharpness. Capable of cutting granites: excellent in durability and capable of cutting granites with high strength glue and laser welding.

    ab
    76.75€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Blade

    Diamond Blade

    HOUSE BM

    Flange ACE is ideal for corner cutting and used for cutting concrete, blocks, tiles, etc. Super silencer MAX is a silent type cutter than can be used for cutting concrete, secondary concrete products (U-block, fume pipe), extrusion cement board, tile, stone, etc.

    ab
    83.67€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Wheel Sword TRX (Dry Type)

    Diamond Wheel Sword TRX (Dry Type)

    LOBTEX

    For cutting concrete, blocks, bricks, slates, mortar, roof tiles and tiles. Cutting speed is improved by 15%. (Compared to our conventional products) It delivers outstanding sharpness and excellent cost effectiveness.

    ab
    56.47€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Rotary Wheel

    Diamond Rotary Wheel

    LOBTEX

    Ideal for repairing the cracks of concrete and mortar.

    ab
    79.26€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Cup Wheel (Dry Type) Offset Type

    Diamond Cup Wheel (Dry Type) Offset Type

    LOBTEX

    Diamond capped wheel has a high density of diamond abrasive grains and demonstrates superior workability in cutting concrete, chamfering and cutting blocks, bricks, roof tiles, stones, fireproof materials in various construction fields.

    ab
    243.07€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Cup Wheel (Dry Type) Double Cup

    Diamond Cup Wheel (Dry Type) Double Cup

    LOBTEX

    Diamond capped wheel has a high density of diamond abrasive grains and demonstrates superior workability in cutting concrete, chamfering and cutting blocks, bricks, roof tiles, stones, fireproof materials in various construction fields.

    ab
    101.02€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Dry Type Diamond Saw for Tiles

    Dry Type Diamond Saw for Tiles

    MIYANAGA

    With the original blade edge shape, cutting of hard porcelain tiles is possible. With the excellent sharpness, chipping of tiles and the like is lessened and the post-work effort is reduced.

    ab
    64.85€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Portable Cutter Light Green (Single)

    Diamond Portable Cutter Light Green (Single)

    ASAHI DIAMOND INDUSTRIAL

    Exclusively for concrete products with a high efficient grinding and excellent cutting ability

    ab
    88.18€
    Minimum Lieferzeit
    10 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Portable Cutter Light Green (Double)

    Diamond Portable Cutter Light Green (Double)

    ASAHI DIAMOND INDUSTRIAL

    Ideal for grinding work of various concrete plane, curved surface and the corners

    ab
    102.48€
    Minimum Lieferzeit
    10 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Cutter Wave

    Diamond Cutter Wave

    IWOOD

    Wave type cutter for cutting concrete and stones.

    ab
    18.60€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • For ALC

    For ALC

    RIKEN DIAMOND INDUSTRY

    A diamond blade for lightweight concrete (ACL) or extruded plate. Different sizes are available according to the machines used or purposes.

    ab
    415.33€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Dry offset

    Dry offset

    RIKEN DIAMOND INDUSTRY

    For finishing work of enclosing resin in the segment.

    ab
    149.58€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Cutter Wave

    Diamond Cutter Wave

    RIKEN DIAMOND INDUSTRY

    Dry type cutter suitable for concrete, PVC products, tile, fire-resistant pipe.

    ab
    57.40€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Easy-Cut

    Easy-Cut

    SANKYO DIAMOND INDUSTRIAL

    Cutting of tiles. Suitable for the cutting of various tiles.

    ab
    59.59€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • V Cutter

    V Cutter

    SANKYO DIAMOND INDUSTRIAL

    For repairing cracks on concrete and mortar, and lower grooving for coking injection

    ab
    118.67€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Blue Lightning Hole Diameter 25.4 mm

    Blue Lightning Hole Diameter 25.4 mm

    SANKYO DIAMOND INDUSTRIAL

    Cutting of reinforced concrete and secondary concrete products (hume pipe, U-shaped groove). Laser turbo type that's been developed for electric motor models only. Brilliant sharpness even with low-torque.

    ab
    160.42€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • Clean-Cut

    Clean-Cut

    SANKYO DIAMOND INDUSTRIAL

    Cutting of marble & FRP. Ideal for the cutting of marble. It can cut quickly with the adoption of hob type blade edge.

    ab
    82.48€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Road Blade JAPAN DX

    Road Blade JAPAN DX

    SANKYO DIAMOND INDUSTRIAL

    Cutting of pavement AR-A / for asphalt SR-AC / cutting of concrete & asphalt SR-C / for concrete. Blade for road cutter only.

    Minimum Lieferzeit
    6 Arbeitstage
  • FS2000

    FS2000

    SANKYO DIAMOND INDUSTRIAL

    Cutting of cast iron pipe, cast iron pipe for drainage, ductile cast iron pipe, powder coated ductile cast iron pipe. High speed cutting with diamond blade edge made by the molten metal method developed exclusively for cast iron.

    ab
    449.17€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Scissors (Dry) - Red Wave Type

    Scissors (Dry) - Red Wave Type

    GOEI

    [Features] The wave will finish the ideal cut end. It is also capable of cutting granites. [Use] For the cutting of concrete, granites, hard bricks, roof tiles, etc.

    ab
    51.20€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Wheel Tile-Kun (Dry Type)

    Diamond Wheel Tile-Kun (Dry Type)

    LOBTEX

    For cutting porcelain tiles, stoneware tiles and ceramic tiles

    ab
    44.46€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Blade for Civil Engineering (Wet Type)

    Diamond Blade for Civil Engineering (Wet Type)

    LOBTEX

    A low cost type with an emphasis placed on economy. For cutting asphalt, concrete road, blocks and bricks etc. Placed emphasis on concrete cutting performance.

    ab
    112.88€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Premium All-Diamond

    Premium All-Diamond

    IWOOD

    Newly developed diamond chip demonstrates astoundingly long-term cutting performance. Wide variety of sizes available - 4 sizes to choose from between 80 mm and 125 mm. Amazing cost effectiveness and economical.

    ab
    87.17€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Cutter - Silent Type

    Diamond Cutter - Silent Type

    RIKEN DIAMOND INDUSTRY

    Dry type cutter suitable for concrete, block, brick, granite, reinforced concrete.

    ab
    47.82€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Cutter Wave

    Diamond Cutter Wave

    RIKEN DIAMOND INDUSTRY

    Wave type diamond cutter suitable for concrete, block, brick, granite, reinforced concrete.

    ab
    21.14€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Blade (Waveform & Cut-End-Oriented Type)

    Diamond Blade (Waveform & Cut-End-Oriented Type)

    RYOBI

    For dry cutting. For the cutting of hard concrete, U-blocks, stones, roof tiles, new building materials, etc.

    ab
    135.43€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Dry Surfacer

    Dry Surfacer

    SANKYO DIAMOND INDUSTRIAL

    Grinding of concrete, brick, block and stone. For both concrete and stone materials. 3 times longer life span. With the cross tips, while increasing the grinding force, the endurance is improved as well.

    ab
    77.33€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Concrete Cutting GH950 358 x 30.

    Concrete Cutting GH950 358 x 30.

    SANKYO DIAMOND INDUSTRIAL

    Cutting of reinforced concrete, resin concrete and high strength concrete. Laser turbo blade that boasts the maximum sharpness. The cleavable diamond tip that even cuts utility poles (with rebar) has been designed and developed.

    ab
    381.92€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Lightning LJ 250 x 25.4

    Lightning LJ 250 x 25.4

    SANKYO DIAMOND INDUSTRIAL

    Cutting of concrete secondary products and blocks. Sharpness is emphasized with the thin laser blade for standard engines and electric motor models.

    ab
    95.42€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Craftsmanship RIM

    Craftsmanship RIM

    SANKYO DIAMOND INDUSTRIAL

    Cutting of concrete and blocks. The standard masterpiece that sankyo diamond proudly presents. Standard rim type that produces a cleanly finished cut end.

    ab
    30.95€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Craftsmanship (Segment)

    Craftsmanship (Segment)

    SANKYO DIAMOND INDUSTRIAL

    Cutting of concrete and blocks. The standard masterpiece that sankyo diamond proudly presents. Standard segment type with an emphasis on sharpness.

    ab
    33.41€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Craftsmanship RIM (Flange)

    Craftsmanship RIM (Flange)

    SANKYO DIAMOND INDUSTRIAL

    Cutting of concrete and blocks. Ideal for corner cutting. It can cleanly cut a right angle portion without touching the lock nut.

    ab
    77.54€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Three S Cutter (Roof Tile)

    Three S Cutter (Roof Tile)

    SANKYO DIAMOND INDUSTRIAL

    Cutting of roof tiles. It is suitable for the cutting of hard roof tiles such as Sanshu, Sekishu and Awaji roof tiles.

    ab
    83.91€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Tile Pro

    Tile Pro

    SANKYO DIAMOND INDUSTRIAL

    Select by life span. Cutter for thick tiles that boasts a long life.

    ab
    52.43€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Cut Master

    Cut Master

    SANKYO DIAMOND INDUSTRIAL

    Maximum sharpness. Short tip, turbo segment. Maximum sharpness. Diagonal slit: heat accumulation effect is prevented with the discharge of chips, allowing the sharpness to last. Short tip: with the heat dissipation effect, vibration of the substrate is reduced. Improved safety. R-edge: by cutting the tip angle to R, chipping of the tips is prevented and safety is improved.

    ab
    68.17€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Laser S1 Cutter 125

    Laser S1 Cutter 125

    SANKYO DIAMOND INDUSTRIAL

    Best in the industry cutting speed. Enhanced safety. Hardened substrate: the strength of substrate is improved by heat treatment.

    ab
    93.42€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Cutter - Hero

    Diamond Cutter - Hero

    SANKYO DIAMOND INDUSTRIAL

    Dual wielding cutter for both concrete and granite. Maximum sharpness. Diagonal slit: heat accumulation effect is prevented with the discharge of chips, allowing the sharpness to last.

    ab
    52.18€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen