• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Diamantschneider(Seite3)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • 8 Tage oder weniger
  • 9 Tage oder weniger
  • 10 Tage oder weniger
  • 32 Tage oder weniger
  • Clean-Cut

    Clean-Cut

    SANKYO DIAMOND INDUSTRIAL

    Cutting of marble & FRP. Ideal for the cutting of marble. It can cut quickly with the adoption of hob type blade edge.

    ab
    102.22€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Japan Pro

    Japan Pro

    SANKYO DIAMOND INDUSTRIAL

    Cutting of pavement. Laser type blade for road cutter only.

    ab
    149.92€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • RZ Protect MARK 2

    RZ Protect MARK 2

    SANKYO DIAMOND INDUSTRIAL

    Cutting of reinforced (10 mm bar) concrete, concrete and blocks. Runs in a straight line. Assured sharpness. Increased sharpness & life span. Protection tip: with the extended side tips, abrasion of the substrate is prevented. (Protect)

    ab
    44.54€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Laser Falcon

    Laser Falcon

    SANKYO DIAMOND INDUSTRIAL

    Cutting of stone materials. Ideal for cutting granite. The diamond tips and substrate are joined by laser welding. Breaking of the tips due to the cutting heat is very rare, balancing the high safety and long life.

    ab
    97.35€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Jack (Segment Type)

    Diamond Jack (Segment Type)

    HOUSE BM

    The ideal type for cutting general materials.

    ab
    65.82€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Tile Killer & Roof Tile Killer

    Tile Killer & Roof Tile Killer

    HOUSE BM

    Thin and corrugated type that has less cut resistance, TK type is ideal for cutting tiles, and KK type is ideal for roof tiles.

    ab
    64.21€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Vinyl Chloride Diamond Cutter (Dry Type)

    Vinyl Chloride Diamond Cutter (Dry Type)

    LOBTEX

    Cutting, chamfering, and finishing PVC pipes. Delivers outstanding sharpness in cutting small to large size diameter pipes, and generates no burrs.

    ab
    59.15€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Wheel U Cutter (Dry Type) / U Cutter Light (Dry Type)

    Diamond Wheel U Cutter (Dry Type) / U Cutter Light (Dry Type)

    LOBTEX

    Ideal for repairing the cracks of concrete and mortar.

    ab
    131.38€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Wheel V Cutter (Dry Type) / V Cutter Light (Dry Type)

    Diamond Wheel V Cutter (Dry Type) / V Cutter Light (Dry Type)

    LOBTEX

    Ideal for repairing the cracks of concrete and mortar.

    ab
    116.94€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Wheel Sky Wave Extra (Dry Type)

    Diamond Wheel Sky Wave Extra (Dry Type)

    LOBTEX

    For cutting concrete, tiles, roof tiles, new building materials, incombustible material, blocks, mortar, and bricks. Cutting speed is improved by 15%. (Compared to our conventional products).

    ab
    79.91€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Wheel Segment Type (Dry Type)

    Diamond Wheel Segment Type (Dry Type)

    LOBTEX

    Ideal for repairing the cracks of concrete and mortar.

    ab
    98.54€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Wheel Lazer Corner Cutter (Dry Type)

    Diamond Wheel Lazer Corner Cutter (Dry Type)

    LOBTEX

    For cutting the corners of concrete and blocks.

    ab
    93.84€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Wheel Laser Blade (Dry Type)

    Diamond Wheel Laser Blade (Dry Type)

    LOBTEX

    A low cost type with an emphasis placed on economy. Hand type for engine cutters. For cutting and dismantling concrete, secondary concrete products, blocks, slates and ALC etc. Tip welding can also be performed safely with laser welding. Superior cutting performance.

    ab
    112.88€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Wheel Tile Cutter Hardness Compatible (Dry Type)

    Diamond Wheel Tile Cutter Hardness Compatible (Dry Type)

    LOBTEX

    For cutting hard tiles and cement tiles such as "Sansyu Tiles" and "Yamato Tiles".

    ab
    64.21€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Cup Wheel (Dry Type) Surface Cup

    Diamond Cup Wheel (Dry Type) Surface Cup

    LOBTEX

    Diamond capped wheel has a high density of diamond abrasive grains and demonstrates superior workability in cutting concrete, chamfering and cutting blocks, bricks, roof tiles, stones, fireproof materials in various construction fields.

    ab
    177.38€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Portable Cutter Light Blue

    Diamond Portable Cutter Light Blue

    ASAHI DIAMOND INDUSTRIAL

    Segment wave type focusing on the cutting quality

    ab
    73.87€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wave Cutter x 2 pcs

    Wave Cutter x 2 pcs

    IWOOD

    Wave type cutter for cutting concrete and stones.

    ab
    25.04€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • U Cutter

    U Cutter

    RIKEN DIAMOND INDUSTRY

    Dry type cutter for concrete joint processing and crack repair.

    ab
    291.50€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Screw cup

    Screw cup

    RIKEN DIAMOND INDUSTRY

    For electric concrete planer of segment type.

    ab
    176.75€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Wave for tile

    Wave for tile

    RIKEN DIAMOND INDUSTRY

    Dry type cutter for porcelain tiles, ceramics tiles, hard tiles, and ceramics system siding.

    ab
    40.24€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Dry cup

    Dry cup

    RIKEN DIAMOND INDUSTRY

    Its is a standard type for concrete surface grinding.

    ab
    96.58€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Neo black dry cup

    Neo black dry cup

    RIKEN DIAMOND INDUSTRY

    Dry type cutter.

    ab
    89.80€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Rim cup

    Rim cup

    RIKEN DIAMOND INDUSTRY

    For electric concrete planer of rim shape.

    ab
    273.25€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Blade (Segment & Sharpness-Oriented Type)

    Diamond Blade (Segment & Sharpness-Oriented Type)

    RYOBI

    For dry cutting. For the cutting of hard concrete, U-blocks, stones, roof tiles, new building materials, etc.

    ab
    83.93€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Dry Shaper (for Building Materials)

    Dry Shaper (for Building Materials)

    SANKYO DIAMOND INDUSTRIAL

    Grinding of concrete, brick, block and stone. Biting into stones and concrete is prevented with resin embedding. Ideal for finishing and flat grinding.

    ab
    93.92€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Dry Shaper (for Stone Materials)

    Dry Shaper (for Stone Materials)

    SANKYO DIAMOND INDUSTRIAL

    Grinding of concrete, brick, block and stone. Biting into stones and concrete is prevented with resin embedding. Ideal for finishing and flat grinding.

    ab
    158.25€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Dry cup

    Dry cup

    SANKYO DIAMOND INDUSTRIAL

    Grinding of concrete, brick, block and stone. It is ideal for rough and flat grinding of concrete and stone.

    ab
    124.25€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SD Half

    SD Half

    SANKYO DIAMOND INDUSTRIAL

    Grinding of concrete, brick, block and stone. Life span of the blade edge has been significantly extended with the integrally molded tips. High efficiency grinding with the wide diamond layer.

    Minimum Lieferzeit
    6 Arbeitstage
  • Lightning LC

    Lightning LC

    SANKYO DIAMOND INDUSTRIAL

    Cutting of concrete secondary products and blocks. Long life with the diamond layer of 8 mm.

    ab
    101.79€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Laser Lightning

    Laser Lightning

    SANKYO DIAMOND INDUSTRIAL

    Cutting of concrete secondary products and blocks. Type 9 Dedicated Laser Blade

    ab
    183.33€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Laser Cosmo

    Laser Cosmo

    SANKYO DIAMOND INDUSTRIAL

    Cutting of concrete and blocks. It can cleanly cut a right angle portion without touching the lock nut. Substrate strength is improved with the stainless steel substrate + laser welding.

    ab
    83.91€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Craftsmanship (Flange)

    Craftsmanship (Flange)

    SANKYO DIAMOND INDUSTRIAL

    Cutting of concrete and blocks. Ideal for corner cutting. It can cleanly cut a right angle portion without touching the lock nut.

    ab
    54.44€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Block Craftsman

    Block Craftsman

    SANKYO DIAMOND INDUSTRIAL

    Cutting of block, red brick and concrete. Economy type that's convenient for minor cutting!! For the beautiful finish on block, mortar, red brick and concrete!! Phenomenal long life.

    ab
    18.57€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Block Master

    Block Master

    SANKYO DIAMOND INDUSTRIAL

    Cutting of block, red brick and concrete. Economy type that's convenient for minor cutting!! For block, mortar, red brick and concrete with an emphasis on sharpness!! Phenomenal long life.

    ab
    21.03€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Tile Pro DX

    Tile Pro DX

    SANKYO DIAMOND INDUSTRIAL

    Cutting of porcelain tiles, ceramic tiles and hard tiles. Picked for sharpness. Less chipping and clean cut section. Blade thickness of 1.0 mm: 20% higher cutting speed than the conventional products.

    ab
    59.59€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SD Segment

    SD Segment

    SANKYO DIAMOND INDUSTRIAL

    Longtime seller SD cutter is evolved to a segment type. Emphasis on the life span. Stable sharpness is sustained by preventing the substrate thermal accumulation.

    ab
    82.16€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Diamond Cutter - Swordsman

    Diamond Cutter - Swordsman

    SANKYO DIAMOND INDUSTRIAL

    Dual wielding cutter for both concrete and granite. Clean finish. Resistance to the work material is small and the finish is beautiful. It can also be used with air tools. An emphasis has been placed on safety. Safe with less resistance to the substrate while cutting. Maximum sharpness. Unequally distributed grooves are used on the diamond layer. Sharpness is improved by reducing the substrate vibration.

    ab
    52.18€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Blue Lightning EH

    Blue Lightning EH

    SANKYO DIAMOND INDUSTRIAL

    Cutting of reinforced concrete and secondary concrete products (hume pipe, U-shaped groove). Laser turbo type that's been developed for electric motor models only. Brilliant sharpness even with low-torque.

    ab
    183.33€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Blue Lightning Hole Diameter 22.0 mm

    Blue Lightning Hole Diameter 22.0 mm

    SANKYO DIAMOND INDUSTRIAL

    Cutting of reinforced concrete and secondary concrete products (hume pipe, U-shaped groove). Laser turbo type that's been developed for electric motor models only. Brilliant sharpness even with low-torque.

    ab
    160.42€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Red Lightning

    Red Lightning

    SANKYO DIAMOND INDUSTRIAL

    Cutting of reinforced concrete and secondary concrete products (hume pipe, U-shaped groove). It can cut in the optimal conditions for the engine model. Laser Turbo type.

    ab
    252.08€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • U Cut

    U Cut

    SANKYO DIAMOND INDUSTRIAL

    For repairing cracks on concrete and mortar, and lower grooving for coking injection

    ab
    193.32€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Red Lightning GX

    Red Lightning GX

    SANKYO DIAMOND INDUSTRIAL

    Cutting of concrete secondary products and blocks. Razor blade for standard engines models. Long life design.

    ab
    183.33€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Easy-Cutter One-Shot Threading

    Easy-Cutter One-Shot Threading

    SANKYO DIAMOND INDUSTRIAL

    Cutting of tiles. Easy installation and removal. Capable of setting in high accuracy in one shot, it has the sharpness that "runs in a straight line" with little rattling and fluctuation. Exclusively for Hitachi disc grinders

    ab
    49.57€
    Minimum Lieferzeit
    auf Anfrage

    *Stückpreis Standardkonfiguration

  • SE Protect MARK 2

    SE Protect MARK 2

    SANKYO DIAMOND INDUSTRIAL

    Cutting of reinforced (10 mm bar) concrete, concrete and blocks. Runs in a straight line. Assured sharpness. Increased sharpness & life span. Protection tip: with the extended side tips, abrasion of the substrate is prevented. (Protect)

    ab
    44.54€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Laser Falcon

    Laser Falcon

    SANKYO DIAMOND INDUSTRIAL

    Cutting of stone materials. Ideal for cutting granite. The diamond tips and substrate are joined by laser welding. Breaking of the tips due to the cutting heat is very rare, balancing the high safety and long life.

    ab
    91.67€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen