• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Schwingungsdämpfungsplatten für Tischausführung

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 13 Tage oder weniger
  • 23 Tage oder weniger
  • Schwingungsdämpfungstisch, Typ Waben-Richtplattentisch

    Schwingungsdämpfungstisch, Typ Waben-Richtplattentisch

    CHUO PRECISION INDUSTRIAL

    [Features] - A desktop vibration removal board that adopts a high-rigidity honeycomb surface plate. - The surface plate face sheet is buffed with 25mm pitch processing and M6 tapping by default. - A magnet stand, etc. can be used since the face sheet (upper surface) is a magnetized SUS430 (stainless steel). - There are three types: vibration-insulating rubber, air spring, and air spring with automatic level adjuster. - The R type is equipped with a special vibration-insulating rubber, and high-grade vibration insulation performance is obtained with the vibration insulating rubber. In addition, it can be easily used since an air supply is not required. An orifice is incorporated within the vibration-insulating rubber, and there is a smooth vibration attenuating function with the same diaphragm effect as an air spring. - The H type can easily restrain compressed air with a hand pump even without an air supply, and the surface plate is floated with an air spring. A hand pump is included. - Since a compact automatic level adjuster is incorporated into an A type, if there is an air supply, the horizontal control of the level is maintained by automatically adjusting the air spring pressure in response to the sprung load. Errors are supplied and evacuated in approximately two seconds by turning the pin lever valve ON and OFF, and the shaking can be resolved when adjusting mounted devices. There is no air piping, and if an air supply cannot be provided, a silent type compressor can be used.

    ab
    1,239.79€
    Minimum Lieferzeit
    23 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Schwingungsdämpfungstisch, Typ Tisch

    Schwingungsdämpfungstisch, Typ Tisch

    CHUO PRECISION INDUSTRIAL

    [Features] - A convenient shock-absorbing board that can be used as it is on top of an office desk or work bench. - Easy to carry around as it is light weight, compactness and slim type. - The 5R type is equipped with a special anti-vibration rubber, with which a high vibration insulation performance can be obtained. - In addition, it can be easily used since it does not require an air supply. - An orifice is incorporated within the vibration-insulating rubber, and there is a smooth vibration attenuating function with the same diaphragm effect as an air spring. - The VSM type is a maintenance free shock-absorbing desk that adopts a composite mount (PAT.P) combining a coil spring with a viscoelastic body, and is equipped with superior vibration insulation performance and high attenuation characteristics. The resonance magnification is approximately 2.5 times, and it possesses a noteworthy performance. - Since a compact automatic level adjuster is incorporated into the 5AA type, if there is an air supply, the horizontal control of the level is maintained by automatically adjusting the air spring pressure in response to the sprung load. Errors are supplied and evacuated in approximately two seconds by turning the pin lever valve ON and OFF, and the shaking can be resolved when adjusting mounted devices. A ø 6mm x 3m urethane tube and joint (RT1/8 external screw) are attached for the connection with an air supply.

    ab
    668.17€
    Minimum Lieferzeit
    13 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen