• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Klappenfeststeller

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • Versand am selben Tag
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 8 Tage oder weniger
  • 10 Tage oder weniger
  • Klappenfeststeller

    Klappenfeststeller

    MISUMI

    • Mengenrabatt
    CAD
    2D3D
    ab
    15.50€
    Minimum Lieferzeit
    Versand am selben Tag

    "Versand am selben Tag" bedeutet, dass die Produkte am gleichen Tag versandbereit sind, wenn Sie Ihre Bestellung bis 16:00 Uhr MEZ platzieren (freitags bis 15:00 Uhr MEZ)

    Inklusive Lagerteile

    *Stückpreis Standardkonfiguration

  • Edelstahl Tischklammer B-1847

    Edelstahl Tischklammer B-1847

    TAKIGEN

    If you raise the table then it is fixed by the stopper action; by pushing the stopper knob then it can be stored. Made of stainless steel, it has excellent corrosion resistance. [Features] - It is made of stainless steel and has excellent corrosion resistance. - If you raise the table, then it is fixed by the stopper action - By pushing the stopper knob, it can be stored.

    CAD
    2D3D
    ab
    10.91€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Klappenfeststeller mit Sperrklinke

    Klappenfeststeller mit Sperrklinke

    MISUMI

    • Mengenrabatt
    CAD
    2D3D
    ab
    6.20€
    Minimum Lieferzeit
    Versand am selben Tag

    "Versand am selben Tag" bedeutet, dass die Produkte am gleichen Tag versandbereit sind, wenn Sie Ihre Bestellung bis 16:00 Uhr MEZ platzieren (freitags bis 15:00 Uhr MEZ)

    Inklusive Lagerteile

    *Stückpreis Standardkonfiguration

  • Kniehebelfeststeller

    Kniehebelfeststeller

    MISUMI

    • Mengenrabatt
    CAD
    2D3D
    ab
    7.50€
    Minimum Lieferzeit
    Versand am selben Tag

    "Versand am selben Tag" bedeutet, dass die Produkte am gleichen Tag versandbereit sind, wenn Sie Ihre Bestellung bis 16:00 Uhr MEZ platzieren (freitags bis 15:00 Uhr MEZ)

    Inklusive Lagerteile

    *Stückpreis Standardkonfiguration

  • Klappenfeststeller/gefedert

    Klappenfeststeller/gefedert

    MISUMI

    • Mengenrabatt
    CAD
    2D3D
    ab
    21.00€
    Minimum Lieferzeit
    Versand am selben Tag

    "Versand am selben Tag" bedeutet, dass die Produkte am gleichen Tag versandbereit sind, wenn Sie Ihre Bestellung bis 16:00 Uhr MEZ platzieren (freitags bis 15:00 Uhr MEZ)

    Inklusive Lagerteile

    *Stückpreis Standardkonfiguration

  • Kleine Gelenkverriegelungen

    Kleine Gelenkverriegelungen

    MISUMI

    • Mengenrabatt
    CAD
    2D
    ab
    1.72€
    Minimum Lieferzeit
    Versand am selben Tag

    "Versand am selben Tag" bedeutet, dass die Produkte am gleichen Tag versandbereit sind, wenn Sie Ihre Bestellung bis 16:00 Uhr MEZ platzieren (freitags bis 15:00 Uhr MEZ)

    Inklusive Lagerteile

    *Stückpreis Standardkonfiguration

  • Drehverriegelungen

    Drehverriegelungen

    MISUMI

    • Mengenrabatt
    CAD
    2D
    ab
    8.77€
    Minimum Lieferzeit
    Versand am selben Tag

    "Versand am selben Tag" bedeutet, dass die Produkte am gleichen Tag versandbereit sind, wenn Sie Ihre Bestellung bis 16:00 Uhr MEZ platzieren (freitags bis 15:00 Uhr MEZ)

    Inklusive Lagerteile

    *Stückpreis Standardkonfiguration

  • Edelstahl-Klammer mit Stopper für schwere Türen, B-1450

    Edelstahl-Klammer mit Stopper für schwere Türen, B-1450

    TAKIGEN

    The fixed angle of the door can be changed by changing the hinge position. [Features] - For both left and right models (the figure is a photograph that shows the right model. For the left side model, install the mounting fittings in a reverse manner. Secure the mounting fittings by turning the nut).

    CAD
    2D3D
    ab
    33.65€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Klappendämpfer Stütze B-495

    Klappendämpfer Stütze B-495

    TAKIGEN

    Folding damper stay with adjustable length, that can be used as either a front cover or a canopy [Features] - It can also be used as either a canopy or a front cover (the damper effect with with the front cover in the opening direction and the canopy in the closing direction) - The length of the link B can be adjusted (default is 150mm - You can change that setting to 160 mm / 170 mm). - Open(or close) the door when changing the length of link B without changing the mounting position. - The speed changes (if longer the speed is faster. The opening and closing angle does not change. - Both the left and right can be used. - For use on the left or right side.

    CAD
    2D3D
    ab
    24.27€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Edelstahldraht-Klammer B-1212

    Edelstahldraht-Klammer B-1212

    TAKIGEN

    Safe stainless steel made. [Features] - It is made of stainless steel and has excellent corrosion resistance, heat resistance and low temperature. - Easy stay, ideal for fixing small hatches. - Minimum required compact design.

    CAD
    2D3D
    ab
    4.47€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Edelstahl rostfrei Frei gestoppte Klammer B-1470

    Edelstahl rostfrei Frei gestoppte Klammer B-1470

    TAKIGEN

    The universal stay can stop the door at any position by operating the handle [Features] - Operating the stopper enables the door to be stopped at any position. - Model for both left and right use.

    CAD
    2D3D
    ab
    29.65€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Edelstahl rostfrei Freie One-Touch-Klammer B-1479

    Edelstahl rostfrei Freie One-Touch-Klammer B-1479

    TAKIGEN

    [Features] - Made of stainless steel with excellent corrosion resistance. - When the lid is opened, the lid can be fixed in any position by the action of the stopper. - When closing, the stopper is released when the stay is fully extended. - A thin type that does not take up space. - For both left and right types.

    CAD
    2D3D
    ab
    23.35€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • One-Touch-Edelstahl-Klammer B-1223

    One-Touch-Edelstahl-Klammer B-1223

    TAKIGEN

    If the lid is opened, the stopper becomes operative. When closing, the stopper is released if it is lifted a little. Stainless steel with excellent corrosion resistance. [Features] - Made of stainless steel with excellent corrosion resistance. - When the lid is opened, the action of the stopper causes the lid to become fastened. - When closing, the stopper is canceled if it is lifted a little. - For use on the left and right (this figure shows use for the right).

    CAD
    2D3D
    ab
    19.92€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Scharnierstrebe für Deckel B-21

    Scharnierstrebe für Deckel B-21

    TAKIGEN

    Stainless steel stop stay with excellent anticorrosion properties that can be stopped in two stages [Features] - Compact and doesn't take much mounting space. - For use on the left or right side.

    CAD
    2D3D
    ab
    5.11€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Edelstahl-Klammer mit Auto-Stopper für Überdachungen, B-1020-B

    Edelstahl-Klammer mit Auto-Stopper für Überdachungen, B-1020-B

    TAKIGEN

    [Features] - The door is securely held by the sliding stopper mechanism. - It is automatically locked by the spring and the door will close when the stopper is released. - For left and right (this figure shows the one for the right).

    CAD
    2D3D
    ab
    16.48€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Multistop Edelstahl-Klammer für Überdachungen B-1570N

    Multistop Edelstahl-Klammer für Überdachungen B-1570N

    TAKIGEN

    Automatic locking with the spring. The door is closed by the release of the stopper. [Features] - Made of stainless steel, it has excellent corrosion resistance. - It stops at positions of 45° increments - For left and right use (figure photo is for the right use one).

    CAD
    2D3D
    ab
    9.61€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Edelstahl rostfrei Freier Anschlagbügel B-1571

    Edelstahl rostfrei Freier Anschlagbügel B-1571

    TAKIGEN

    Safe design that retains the position even if you remove your hand, due to the attached ratchet mechanism type of safety stopper. [Features] - Retains the position even if you remove your hand when opening the hood, due to operation of the ratchet mechanism type of safety stopper (PAT.PEND).

    CAD
    2D3D
    ab
    61.11€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Edelstahl Tischklammer B-1485

    Edelstahl Tischklammer B-1485

    TAKIGEN

    [Features] - Made of stainless steel with excellent corrosion resistance. - When the table is raised, it is fixed by the stopper action. - It can slide if the the stopper button is pulled. - An expandable type with a little danger of the hand being caught.

    CAD
    2D3D
    ab
    35.94€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • One-Touch-Edelstahl-Klammer für Deckel B-1460

    One-Touch-Edelstahl-Klammer für Deckel B-1460

    TAKIGEN

    Stopper is made of stainless steel so it has excellent corrosion resistance. With a safety function to prevent the lid from closing accidentally [Features] - When the lid is open it is secured by the operation of the stopper. - When closing the lid, lift it up slightly to release the stopper lock. - With a safety device to prevent the lid from closing accidentally. - It is made of stainless steel so it has excellent corrosion resistance. - B-1460-2 – 4 are the left-right use type. - When installing, the top and bottom will be reversed (however, for B-1460-1 there is a left-right use type. This figure is for the left use type.

    CAD
    2D3D
    ab
    26.21€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Große Türklemme B-25

    Große Türklemme B-25

    TAKIGEN

    [Features] - For both left and right models. - A large-sized door stay that can be used from side to side using a metal fitting mounting method.

    CAD
    2D3D
    ab
    10.47€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • One-Touch-Strebe für Überdachungen B-580-1

    One-Touch-Strebe für Überdachungen B-580-1

    TAKIGEN

    If the lid is opened the stopper fixes it in place. To release, simply lift the lid a little. [Features] - If the lid is opened the stopper fixes it in place. - To close, release simply by lifting the lid a little. - Right/left use.

    CAD
    2D3D
    ab
    14.77€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Edelstahl Deadlock Klammer B-1467

    Edelstahl Deadlock Klammer B-1467

    TAKIGEN

    Resistant to vibration and shock and made of stainless steel that has excellent corrosion resistance. When opened, it is completely fixed and it closes with a press of the stopper. [Features] - Safe structure, resistant to shock and vibration. - It is stainless steel and has excellent corrosion resistance. - Opening makes it completely fixed, and closes by pressing of the stopper. - For left and right (this figure shows the one for the right with photos).

    CAD
    2D3D
    ab
    32.51€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Klammer mit automatischem Stopper für Überdachung, B-20-B

    Klammer mit automatischem Stopper für Überdachung, B-20-B

    TAKIGEN

    The sliding type stopper holds the door securely [Features] - The door is securely held by the sliding stopper - It is automatically locked by the spring and the door will close when the stopper is released. - For left and right use (figure photo is for the right use one).

    CAD
    2D3D
    ab
    11.91€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Einwegdrehmomentenstrebe B-492

    Einwegdrehmomentenstrebe B-492

    TAKIGEN

    Can be stopped in any position. The holding power and closing speed can be adjusted using the attached hexagon wrench. [Features] - The door can be stopped in any position. - The torque is exerted in one direction during operation. - The holding power and closing speed can be adjusted using the attached hexagon wrench. - Upward opening door and left and right type.

    CAD
    2D3D
    ab
    21.06€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Edelstahl-Federanschlag Stopklammer B-1480-S

    Edelstahl-Federanschlag Stopklammer B-1480-S

    TAKIGEN

    [Features] - The pin is dropped into the stopper hole or secure fastening, this done by action of the spring when the door is opened. - The stopper disengages when the arm is pressed down. - The B-1480 (pg. 868) locking mechanism ensures even further accuracy. - Right-and-left use type.

    CAD
    2D3D
    ab
    24.84€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Flache One-Touch-Stütze für Deckel B-38

    Flache One-Touch-Stütze für Deckel B-38

    TAKIGEN

    One-touch stay locked by the steel ball and the plate spring [Features] - It can be locked by the action of the steel ball and the plate spring. - For left and right.

    CAD
    2D3D
    ab
    4.90€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Edelstahl-Schrauben-Befestigungsklammer für Fenster, B-1452

    Edelstahl-Schrauben-Befestigungsklammer für Fenster, B-1452

    TAKIGEN

    A left-right use stay made of stainless steel, so it has excellent corrosion resistance. [Features] - It is made of stainless steel and has an excellent corrosion resistance. - Left-right use type (The figure photo is of the right-type. - For the right use type, please set the mounting brackets in a reverse fashion).

    CAD
    2D3D
    ab
    41.44€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Edelstahl-Klammer für schwere Türen, B-1451

    Edelstahl-Klammer für schwere Türen, B-1451

    TAKIGEN

    Stay for heavy doors for both left and right utilizing a stop mechanism with a strong coil spring. [Features] - Utilizing a stop mechanism with a strong coil spring. - Left and right combined type (in the photograph both the right types are in a set). For the left-side please set the mounting brackets in reverse.

    CAD
    2D3D
    ab
    32.51€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Edelstahlrutsche Brace für Deckel, B-1455

    Edelstahlrutsche Brace für Deckel, B-1455

    TAKIGEN

    The stopper works when the lid is opened. If the button is pulled out, slide can be done again. Stainless steel, excellent against rust. [Features] - If the lid is opened the stopper fixes it in place. - It can slide if the stopper button is pulled. - The lid can be fixed in 3 positions. - Stainless steel with excellent rust resistance. - Can bolt on both left and right

    CAD
    2D3D
    ab
    24.50€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Türschließer B-860

    Türschließer B-860

    TAKIGEN

    Door check for both left and right type stops door around 90° and opens smoothly [Features]: · Door is smoothly opened and will stop at around 90° - Left and right dual-application type.

    CAD
    2D3D
    ab
    48.88€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • One-Touch-Strebe für Überdachungen B-580-2

    One-Touch-Strebe für Überdachungen B-580-2

    TAKIGEN

    If the lid is opened the stopper fixes it in place. To release, simply lift the lid a little. [Features] - If the lid is opened the stopper fixes it in place. - To close, release simply by lifting the lid a little. - Right/left use.

    CAD
    2D3D
    ab
    13.63€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Sicheres Edelstahl-Klammerschloss, B-1474

    Sicheres Edelstahl-Klammerschloss, B-1474

    TAKIGEN

    [Features] - Safe, completely fastening type. - Added a safety lock mechanism to the conventional stay B-1460. - Does not close unless button is pressed and released. - Made of SUS316 with Brine-damage resistant specifications - For left and right use.

    CAD
    2D3D
    ab
    43.38€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Edelstahl-Klammer für leichte Türen, B-1454

    Edelstahl-Klammer für leichte Türen, B-1454

    TAKIGEN

    Made of stainless steel, the stay for light-weight doors has excellent corrosion resistance. [Features] - It is made of stainless steel so it has excellent corrosion resistance. - Left-right use type (the figure is for the left use type. For the right use type, please set the mounting brackets in a reverse fashion).

    CAD
    2D3D
    ab
    13.05€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Klammer für Frontabdeckung B-471

    Klammer für Frontabdeckung B-471

    TAKIGEN

    Resin is used for the sliding portion, and while it slides extremely smoothly, the slide is corrosion-resistant stainless steel [Features] - It is securely locked at position opening the door about 80°. - If the door is lift slightly the lock is released and the door closes. - The mounting position is marked to it can be easily installed. - Only for right use.

    CAD
    2D
    ab
    13.40€
    Minimum Lieferzeit
    10 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Klammer mit Stopper B-430

    Klammer mit Stopper B-430

    TAKIGEN

    Stay for both left and right use, with stopper. [Features] - Fitting interchangeable with B-450-2 (B-430-2) and B-450-3 (B-430-3). - Model for both left and right use (please change position of the stopper for left hand use).

    CAD
    2D3D
    ab
    14.54€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Klammer mit Stopper für schwere Türen, B-450

    Klammer mit Stopper für schwere Türen, B-450

    TAKIGEN

    The fixed angle of the door can be changed by changing the hinge position. [Features] - For both left and right models (the figure is a photograph that shows the right model. For the left side model, install the mounting fittings in a reverse manner. Secure the mounting fittings by turning the nut).

    CAD
    2D3D
    ab
    24.50€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Edelstahl-Klammer für Deckel, B-1040

    Edelstahl-Klammer für Deckel, B-1040

    TAKIGEN

    Compact and does not take up space. Right and left-hand use types are available.

    CAD
    2D3D
    ab
    8.04€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Einwegdrehmomentenstrebe B-490

    Einwegdrehmomentenstrebe B-490

    TAKIGEN

    Smooth and quiet, thanks to resin friction. Stop possible in optional positions with torque adjustment. [Features] - Use of resin friction eliminates abnormal noise, makes for smooth motion. - During operation, load is only exerted in one direction. - Stopping in optional positions possible with torque adjustment. - Torque alteration due to temperature change is minimal. - For right-hand side.

    CAD
    2D3D
    ab
    19.69€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Klammer für Deckel B-40

    Klammer für Deckel B-40

    TAKIGEN

    Compact and since it does not take up space, can be used in any location. [Features]: - Compact and does not take up space. - For left and right-hand use (drawing and photos show right-hand use).

    CAD
    2D3D
    ab
    3.75€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Edelstahl-Klammer B-1475

    Edelstahl-Klammer B-1475

    TAKIGEN

    Stay with excellent corrosion resistance made from stainless steel for either left or right hand use. [Features] - Made of stainless steel, has excellent corrosion resistance. - Model for both left and right use.

    CAD
    2D3D
    ab
    43.73€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • One-Touch-Strebe für Überdachungen B-580-3

    One-Touch-Strebe für Überdachungen B-580-3

    TAKIGEN

    If the lid is opened the stopper fixes it in place. To release, simply lift the lid a little. [Features] - If the lid is opened the stopper fixes it in place. - To close, release simply by lifting the lid a little. - Right/left use.

    CAD
    2D3D
    ab
    12.48€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 90°-Anschlag B-893

    90°-Anschlag B-893

    TAKIGEN

    [Features] - When the door is opened, it automatically locks at 90°, - The lock does not move in the closing direction. - When opening the door at 90° or more, please open while pushing on the lock part. - Ideal for light vehicles. - Right-and-left use type.

    CAD
    2D3D
    ab
    27.93€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Schrauben Montagehalterung für Fenster, B-36

    Schrauben Montagehalterung für Fenster, B-36

    TAKIGEN

    Stainless steel with excellent corrosion resistance for peace of mind for the sides with windows. For both the left and right types. [Features] - The lightweight window can be secured to any position by tightening the screw. - For left and right (All pictures in this figure are for the right).

    CAD
    2D3D
    ab
    29.99€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Edelstahl-Federdraht Klammer B-1221

    Edelstahl-Federdraht Klammer B-1221

    TAKIGEN

    Cannot stretch excessively due to the core wire. Ideal for lightweight compact hatch as simple stay. [Features] - Corrosion-resistant stainless steel, has excellent heat resistance, and low temperature resistance. - Ideal for fixing compact hatch as simple stay. - Minimum required compact design.

    CAD
    2D3D
    ab
    15.69€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Edelstahl drehbare Klammer B-1453

    Edelstahl drehbare Klammer B-1453

    TAKIGEN

    Für Bestellungen, die ab dem 1. Juni 2013 eingehen, werden die Indizes geändert: Teile die für linksseitige Verwendung vorgesehen waren, sind nun für die rechte Seite, und umgekehrt (Beispiel: B-1453-1-L ⇒ B-1453-1-R). Sollten Sie zusätzliche Informatione

    CAD
    2D3D
    ab
    10.40€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Auf Lager

Suchergebnisse durch Auswahl der Spez./Maße einschränken

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen