• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Kanäle, flexible Schlauchleitungen(Seite4)

  • Daten, die angezeigt werden sollen
    30
    45
    60
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • 8 Tage oder weniger
  • 10 Tage oder weniger
  • 11 Tage oder weniger
  • 12 Tage oder weniger
  • 13 Tage oder weniger
  • Plus Ace HFO

    Plus Ace HFO

    TOYO TIRE & RUBBER

    [Features] - Based on a hose structure that takes workability into account, the slipperiness with road surfaces is good, with adequate flexibility and superior workability. - There is little expansion and contraction during use as a result of the reinforcing cord, and can be used for suspending. - Since transparent PVC is used in the soft member, it is easy to confirm the hose interior.

    Minimum Lieferzeit
    5 Arbeitstage
  • Neuer hitzebeständiger / verschleißfester Schlauch MFB

    Neuer hitzebeständiger / verschleißfester Schlauch MFB

    TOYO TIRE & RUBBER

    [Features] - Uses a special synthetic rubber for the soft portion of the hose for excellent abrasion resistance. - Excellent anti-static effect performance as it includes a hard steel wire. (Ground using the hard steel wire). - Smooth inner surface and the transport can be done efficiently with little resistance.

    Minimum Lieferzeit
    5 Arbeitstage
  • Tetron-Gewebe

    Tetron-Gewebe

    PLAS-TECH

    Flexibel und leichtgewichtig, mit gummiartiger, weicher Textur. Beweist außergewöhnliche Druckfestigkeit dank faserverstärkter, geflochtener Spezifikation.

    ab
    630.00€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TAC Eco-Leitung Hitzebeständiges Öl

    TAC Eco-Leitung Hitzebeständiges Öl

    TOTAKU INDUSTRIES

    The B-hose, in addition to transport of generic foods, can also transport oily and greasy foods. Due to semi-transparency, freights can be verified. With reinforced cord, it has allowable pressure of 0.5 MPA. [Features] - It can be used to transport generic foods and oily and greasy foods. - Complies with the Food Sanitation Law, Ministry of Health and Welfare Notification No. 20 (Compatible with all items including heptane) - Clean with hot water, *1.95% ethanol washing is possible and hygienic. - After using the hose, it can be incinerated with no occurrence of harmful gases *2 (incinerated ash content is less than 0.1%) - Due to the semi-transparency, transported material can be verified. - With reinforced cord, it is pressure resistant with a maximum permissible pressure 0.5 MPa (5.1 kgf/f). - Because it is lightweight, it floats in water.

    Minimum Lieferzeit
    6 Arbeitstage
  • TAC SD-AS Lebensmittel

    TAC SD-AS Lebensmittel

    TOTAKU INDUSTRIES

    This hose is more lightweight and flexible than the TAC SD-C for food products, and is compatible with an anti-static mechanism that improves internal slipperiness. Suitable for transporting powder/liquid food products, transporting boiled rice, and transporting foodstuff containers

    Minimum Lieferzeit
    6 Arbeitstage
  • TAC SD-C hitzebeständig, Lebensmittel

    TAC SD-C hitzebeständig, Lebensmittel

    TOTAKU INDUSTRIES

    TAC SD-C food product heat-resistant specification It features excellent heat resistance (80°C maximum usage temperature). Hose for food products completely compliant with Ministry of Health, Labor and Welfare Notifications Nos. 201 and 267. [Features] - TAC SD-C food product heat-resistant specification - Features excellent heat resistance. (80°C maximum usage temperature) - It uses a non-phthalic acid plasticizer and is compliant with Ministry of Health, Labor and Welfare Notification No. 267 effective August 1, 2003. (Imprisonment for not longer than 6 months or a fine not greater than ¥300,000 is imposed on sales or use that violates this regulation.) - This can be used with fats and fatty food products (in complete compliance with Ministry of Health, Labor and Welfare Notification No. 201).

    Minimum Lieferzeit
    6 Arbeitstage
  • Leitungsstrom C

    Leitungsstrom C

    TOTAKU INDUSTRIES

    All resin type of pressure hose. Since the outer surface is protected by a rigid PVC, the strong outer surface is strongly wear resistant, and the structure is such that the reinforcing fibers are not prone to sticking out.

    Minimum Lieferzeit
    6 Arbeitstage
  • Schlauchleitung DH

    Schlauchleitung DH

    CHIYODA TSUSHO

    Weicher Schlauch mit Oberflächenzusammenfassung

    ab
    32.44€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Druckfester Schlauch New Kana Power Hose C20

    Druckfester Schlauch New Kana Power Hose C20

    KANAFLEX CORPORATION

    Flacher Außenoberfläche für höhere Verarbeitbarkeit. Spezieller Gummi mit abriebfester Innenfläche um hohe Qualität über einen längeren Nutzungszeitraum hinweg zu gewährleisten. Nutzt verstärkendes Kabel und hartes/weiches PVC-Kompositmaterial, kombiniert

    Minimum Lieferzeit
    6 Arbeitstage
  • Ölfester Schlauch Kana Power New ATO

    Ölfester Schlauch Kana Power New ATO

    KANAFLEX CORPORATION

    It also has excellent heat and oil resistance, making it suitable from lorry to drop work. Flexibility similar to resin hose. It has an anti-static effect due to the insertion of conductive special rubber and ground wire. [Features] - It also has excellent heat and oil resistance and can be used in oil types in general, making it suitable from lorry to drop work. - Flexibility of the resin hose is achieved through the combination of special rubber and rigid PVC structure. - Strong against external pressure and difficult to get flat. - It has an anti-static effect due to the insertion of conductive special rubber and ground wire. - It has excellent durability, uses a stiff spring, and is strong against bending around the entrance.

    Minimum Lieferzeit
    8 Arbeitstage
  • Pistolenschloss

    Pistolenschloss

    PLAS-TECH

    Weather resistance is superior to that of a rubber hose, so it can be used for a long period of time even outdoors. It has flexibility and excellent operability. For rock crushing machines.

    ab
    96.31€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Saugschlauch, Modell CT

    Saugschlauch, Modell CT

    PLAS-TECH

    Has excellent bendability compared to the FW type. Suitable for both suction and delivery. Transparency allows for liquids in the hose to be checked.

    ab
    141.31€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Farbe

    Farbe

    TOYOX

    Painting and spray hose. It is ideal for the conveyance of solvents for paints and such as well as for painting work. It is transparent so it is easy to confirm the fluid running through and be reassured.

    ab
    85.46€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Lackierzwilling

    Lackierzwilling

    TOYOX

    The solvent/paint hose are integrated into the air hose. Since it is lightweight and integrated, operation performance is good and it easy to use.

    ab
    155.38€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Eclemma Luftschacht

    Eclemma Luftschacht

    PLAS-TECH

    Prevents the buildup of electrostatic charge through the use of a special resin. It can prevent clogging and adhesion of cargo, so it is suited for use with precision weighing equipment.

    ab
    310.59€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Kuronet

    Kuronet

    PLAS-TECH

    Improved resistance due to reinforcement of fiber. Guards against ultraviolet penetration, and prevents algae growth.

    ab
    100.83€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Techno Air

    Techno Air

    PLAS-TECH

    Flexible, smooth, lightweight - superior in operability Major improvements especially in lubricity, approximately twice that of conventional products (Comparison with our company's Technoflex)

    ab
    22.34€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Sun-Farbschlauch (P)

    Sun-Farbschlauch (P)

    TOGAWA INDUSTRY

    Shows flexibility due to use of solvent resistant urethane resin in the outer layers. Tube focusing on workability in coating processes.

    ab
    424.28€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TFS-Abdichtung HF-Ausführung

    TFS-Abdichtung HF-Ausführung

    TOYOX

    Hygienic with nipple shape which will not easily form liquid pools. Safe with nipple shape and cover to prevent the inner tube from being cut.

    Minimum Lieferzeit
    auf Anfrage
  • TAC Eco SD-C

    TAC Eco SD-C

    TOTAKU INDUSTRIES

    Desalinized B hose with flat inner and outer surfaces. Can be used for food purposes as it provides excellent heat resistance and flexibility. Freight loads can be verified due to the semi-transparency. [Features] - It can be used for food purposes. * It is not suitable for the transport of food and liquids that contain oil. - Compliant with the Public Notice of the Food and Sanitation Act of the Ministry of Health, Labour and Welfare Number 201 (however, this excludes the section on the elution test with heptane on fats and oils an fatty foods). - Excellent heat resistance and flexibility achieved. - 95% ethanol washing and hot water cleaning is possible and hygienic. (Please perform scalding ablution under the conditions of temperatures below 80°C, pressure 0.1 MPa or less, and pressurization time within 3 minutes). - Lightweight and superior in flexibility. Both inner and outer surfaces are smooth. Freight loads can be verified due to the semi-transparency.

    Minimum Lieferzeit
    6 Arbeitstage
  • TAC Eco-Leitung

    TAC Eco-Leitung

    TOTAKU INDUSTRIES

    An olefin-based elastomer PVC hose that can be used in food applications. A reinforcement cord is included, and it has breakdown voltage performance of 0.5 MPa allowable pressure. [Features] - It can be used in food applications. - It is not suitable for the transport of food and liquids that contain oil. - Complaint with the Food Sanitation Law Ministry of Health, Labor and Welfare Notification No. 201 (however, the heptane dissolution test in regards to fat oils and fatty foods has been excluded). - Please carry out hot water washing under the conditions of temperature 80°C or below, pressure 0.1 MPa or less, and pressurization time 3 minutes. - 95% ethanol washing is possible and hygienic. - After use when it is not longer needed, the hose can be incinerated without the occurrence of harmful gases such as hydrogen chloride, sulfur oxides, nitrogen oxides, hydrogen cyanide and ammonia (ash content is 0.1% or less). - Due to the semi-transparence you can verify the transported goods. - There is flexibility, you can work comfortably. - A reinforcement cord is included, and it has breakdown voltage performance of maximum allowable pressure 0.5 MPa (5.1 kgf / f). - Because it is light in weight, it will float in water.

    Minimum Lieferzeit
    5 Arbeitstage
  • TAC SD-C3

    TAC SD-C3

    TOTAKU INDUSTRIES

    TAC SD-C-Leichtes Modell

    Minimum Lieferzeit
    5 Arbeitstage
  • Leitungsstrom ATL

    Leitungsstrom ATL

    TOTAKU INDUSTRIES

    Leitungsstrom AT-Leichtes Modell

    Minimum Lieferzeit
    6 Arbeitstage
  • Leitungsstrom ABR-W

    Leitungsstrom ABR-W

    TOTAKU INDUSTRIES

    Mortar pressure-feeding hose with improved pressure-resistance and durability from using rubber in the interior. Suitable for transporting at steep inclines and high-viscosity materials. [Features] - It uses rubber in the interior, and has superior pressure-resistance and durability compared to line power CV

    Minimum Lieferzeit
    auf Anfrage
  • Schlauch für Lebensmittel FST

    Schlauch für Lebensmittel FST

    TOYO TIRE & RUBBER

    [Features - Does not have the odor of conventional vinyl chloride products. - Phthalic ester is not used in the plasticizer. - Complies with standards regarding laws on food sanitation /food products and additives (1959 Ministry of Health and Welfare Notification No. 370) - Designed with a smooth interior, and is hygienic since there is no liquid residue or fermentation left behind. - Transparency makes checking fluid easy.

    Minimum Lieferzeit
    5 Arbeitstage
  • Air Friend

    Air Friend

    PLAS-TECH

    [Features] - Weather resistance is more superior than a rubber hose, so it can be used for a long period of time even outdoors. - It has flexibility and excellent operability. - It is used for air tools. - Working temperature is -20°C – 60°C.

    ab
    228.69€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TopRun

    TopRun

    TOYOX

    Special urethane hose ideal for moving air tools. Easy to handle because it is soft and flexible. Type that is tough even with sparks from grinders, etc. Smooth workability due to good hose slipperiness, less catch and hard to break properties. [Features] - Efficient workability because the hose installed on site can be changed. - Since these are nut tightened, they can be replaced * Reusable and economical. - * Depending on the conditions of use, as a guide, replacement of parts (sleeve) is required about 5 times. - Note: This fitting is not for day-to-day disassembly and cleanup. - Since it is a deadline type, no need for tedious tightening and can standardize the installation work. - Ideal for sanitary applications like in food and beverage with a nipple shape which will not easily form liquid pools. - Eliminates fluid leakage from missing hose, with the hose firmly secured in a special sleeve form. - Hygienic and resistant to rust because it is made of stainless steel (SUS316L, SUS304) and fluorine-based resin. - Supports 2 types of hose, toyosilicone (for pumping) and toyosilicone S (for suction). - It can be used for the appropriate piping applications. - The material is suitable for material-specific disposal as it can be disassembled. (good for stainless steel recycling system.)

    ab
    326.67€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TSIS-Abdichtung HF-Ausführung

    TSIS-Abdichtung HF-Ausführung

    TOYOX

    Hygienic with nipple shape which will not easily form liquid pools. Safe with nipple shape and cover to prevent the inner tube from being cut. [Features] - Difficult to collapse, high temperature (150°C) pumping, vacuum OK. - Excellent heat resistance and cold resistance (operating temperature range -30 – 150°C). - It is hygienic, reinforced with rust resistant SUS304. - It has excellent pressure resistance with special braided reinforced structure. - Safe, with high transparency for checking fluid. - Food Sanitation Law (1951 Ministry of Health and Welfare Notification No. 52, 2006 Ministry of Health, Labour and Welfare Notification No. 201). - FDA (US Food and Drug Administration) standards compliant product

    Minimum Lieferzeit
    auf Anfrage
  • Leitungsstrom ATS

    Leitungsstrom ATS

    TOTAKU INDUSTRIES

    The large diameter type of the line power AT. Designed with thicker wear resistant rubber than the line power AT.

    Minimum Lieferzeit
    6 Arbeitstage
  • Leitungsstrom CV

    Leitungsstrom CV

    TOTAKU INDUSTRIES

    Tip dedicated hose with mortar pumping with superior heat-resistance and wear resistance. This is a hose that is hard to flatten and buckle and strong against external pressure.

    Minimum Lieferzeit
    auf Anfrage
  • TAC Rein W

    TAC Rein W

    TOTAKU INDUSTRIES

    Vacuum car hose. A design with the hose outer surface's wear resistance thought over and with excellent durability.

    Minimum Lieferzeit
    6 Arbeitstage
  • Schlauch für Lebensmittel, V.S.-C-Modell (für Lebensmittel)

    Schlauch für Lebensmittel, V.S.-C-Modell (für Lebensmittel)

    KANAFLEX CORPORATION

    [Features] - Best suited for food transport. - For both suction and delivery. - Complies with the n- heptane dissolution test for oil and fat as well as fatty foods.

    Minimum Lieferzeit
    7 Arbeitstage
  • Ultragewebe

    Ultragewebe

    PLAS-TECH

    Improved resistance due to reinforcement of fiber. Economy type garden hose.

    ab
    29.44€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Eclemma Absaugung FW-Ausführung,

    Eclemma Absaugung FW-Ausführung,

    PLAS-TECH

    Prevents the buildup of electrostatic charge through the use of a special resin. It can prevent clogging and adhesion of cargo, so it is suited for use with precision weighing equipment.

    ab
    472.50€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Hochpolymer

    Hochpolymer

    PLAS-TECH

    [Features] - Uses high elasticity resin with superior cold resistance - Food Sanitation Act compliant product (Ministry of Health, Labor and Welfare Notification No. 201; however, oils and fats and fatty foods are excluded).

    ab
    92.74€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Planet

    Planet

    PLAS-TECH

    Improved resistance due to reinforcement of fiber. High class garden hose.

    ab
    110.72€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • ECS-Abdichtung HF-Ausführung

    ECS-Abdichtung HF-Ausführung

    TOYOX

    Hygienic with nipple shape which will not easily form liquid pools. Safe with nipple shape and cover to prevent the inner tube from being cut.

    Minimum Lieferzeit
    auf Anfrage
  • TGF-Abdichtung HF-Ausführung

    TGF-Abdichtung HF-Ausführung

    TOYOX

    Hygienic with nipple shape which will not easily form liquid pools. Safe with nipple shape and cover to prevent the inner tube from being cut.

    Minimum Lieferzeit
    auf Anfrage
  • TAC Fluoro C

    TAC Fluoro C

    TOTAKU INDUSTRIES

    Modell mit flacher Außenoberfläche, Schläuche mit Innenfläche aus Fluorharz für hervorragende Chemikalienbeständigkeit. Ausgezeichnete Wasserabweisung und konform mit den Verordnungen der Lebensmittelhygiene (Ministerium für Gesundheit, Arbeit und Wohlfah

    Minimum Lieferzeit
    auf Anfrage
  • TAC SD-C

    TAC SD-C

    TOTAKU INDUSTRIES

    [Features] - The inner and outer surfaces are evenly smooth. - Has more pressure resistance than TAC SD-A. - Can check transporting items due to the transparency of soft parts.

    Minimum Lieferzeit
    5 Arbeitstage
  • MEGA Schlauch

    MEGA Schlauch

    CHIYODA TSUSHO

    Schlauch mit einem Innendurchmesser, der etwa 20 % größer ist im Vergleich zu Chiyoda-Schläuchen mit gleichem Außendurchmesser.

    ab
    68.89€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Farbiger Schlauch

    Farbiger Schlauch

    PLAS-TECH

    Ein Bewässerungsschlauch-Standardmodell mit Doppelrohren, das überaus geschmeidig und flexibel ist

    ab
    123.28€
    Minimum Lieferzeit
    8 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Mörtelschlauch

    Mörtelschlauch

    PLAS-TECH

    Spezieller Schlauch für Zementinjektion in Spannbetonbrücken (PC Brücken). Durch Farbdifferenzierung können Fehler bei der Arbeit vermieden werden.

    ab
    131.43€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Grünes Wasser

    Grünes Wasser

    PLAS-TECH

    It has excellent heat resistance because of its strong fiber. Excellent operability due to being flexible and lightweight

    ab
    350.12€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Schlauch der Super-Familie

    Schlauch der Super-Familie

    PLAS-TECH

    [Features] - Supple and abundant flexibility. - The working temperature is -20°C – 60°C and the color is green.

    ab
    27.97€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen