Auswerferhülsen / Stahl / nitirert / Länge konfigurierbar / Konzentrizität 0.03

Auswerferhülsen / Stahl / nitirert / Länge konfigurierbar / Konzentrizität 0.03

Klicken Sie auf dieses Bild, um es zu vergrößern.

Klicken Sie auf dieses Bild, um es zu vergrößern.

(i)Hinweis

  • Please check the content on our website as the PDF does not contain the most up-to-date information.

Teilenummer

Hier finden Sie die Teilenummern
zu dem gesuchten Artikel

ストレートエジェクタスリーブ -SKD61+窒化/同軸度◎0.03/ツバ厚4mm/全長指定タイプ-
 
L50.00~
75.00
75.01~
100.00
100.01~
125.00
125.01~
150.00
150.01~
175.00
175.01~
200.00
200.01~
225.00
225.01~
250.00
250.01~
275.00
275.01~
300.00
(L-S)3550(V1.560)75(V1.585)90(V1.5110)115120145170185210

 Note that the Stepped Center Pin's shaft diameter (D) is too large to fit in the recess (C). (Details  P.1310
 

Part NumberVApplicable center pin shaft diameter tolerance
ESNV-LCH7-0.01
-0.02
※ Note that for sleeves with V dimension tolerance of H7,
     combination with center pins that have shaft diameter
     tolerance     0 -0.005 is not recommended. The reason for this
     is the fitting sections S are longer.(Details  P.1309
SKD61 equivalent+Nitrided
Surface : 900HV
 Base material : 40±3HRC
 b1 (Range of guaranteed shaft diameter precision) (Details  P.1305
     x1 max.=30
     Range of guaranteed base material hardness (Details  P.1307
     Range of guaranteed surface hardness for nitriding (Details  P.1308

VH7

V≦3.03.5≦V≦6.0V≧6.5
+0.010
  0
    +0.012
      0
+0.015
  0

Specifications

ストレートエジェクタスリーブ -SKD61+窒化/同軸度◎0.03/ツバ厚4mm/全長指定タイプ-
HPart NumberL
0.01mm increments
V
Selection
TypeD
7ESNV-LC450.00~150.00
1.5
50.00~200.00
2.0
2.5
84.550.00~150.00
1.5
50.00~200.00
2.0
2.5
550.00~200.00
2.0
2.5
3.0
95.550.00~200.00
2.0
2.5
3.0
3.5
650.00~250.00
2.5
3.0
3.5
4.0
106.550.00~250.00
2.5
3.0
3.5
4.0
750.00~250.00
2.5
3.0
3.5
4.0
4.5
5.0
117.550.00~250.00
3.0
3.5
4.0
4.5
5.0
850.00~250.00
4.0
4.5
5.0
5.5
6.0
14980.00~300.00
6.0
6.5
7.0
151080.00~300.00
6.0
7.0
8.0

Alterations

ストレートエジェクタスリーブ -SKD61+窒化/同軸度◎0.03/ツバ厚4mm/全長指定タイプ-

 P.275

Teilenummer:  

    3D Vorschau nicht verfügbar, da noch keine Teilenummer generiert wurde.

  • Um die 3D Vorschau anzeigen zu können, muss die Konfiguration abgeschlossen sein.
Loading...
Teilenummer
ESNV-LC4-[50-200/0.01]-V[1.5,​2,​2.5]
ESNV-LC4.5-[50-200/0.01]-V[1.5,​2,​2.5]
ESNV-LC5-[50-200/0.01]-V[2,​2.5,​3]
ESNV-LC5.5-[50-200/0.01]-V[2,​2.5,​3,​3.5]
ESNV-LC6-[50-250/0.01]-V[2.5,​3,​3.5,​4]
ESNV-LC6.5-[50-250/0.01]-V[2.5,​3,​3.5,​4]
ESNV-LC7-[50-250/0.01]-V[2.5,​3,​3.5,​4,​4.5,​5]
ESNV-LC7.5-[50-250/0.01]-V[3,​3.5,​4,​4.5,​5]
ESNV-LC8-[50-250/0.01]-V[4,​4.5,​5,​5.5,​6]
ESNV-LC9-[80-300/0.01]-V[6,​6.5,​7]
ESNV-LC10-[80-300/0.01]-V[6,​7,​8]
TeilenummerMindestbestellmengeMengenrabatt
Reguläre
Versanddauer
?
RoHSD/P (Wellendurchmesser)
(mm)
V (Bohrungsdurchmesser)
(mm)
L (L-Maß)
(mm)
1 auf Anfrage 1041.5 ~ 2.550 ~ 200
1 auf Anfrage 104.51.5 ~ 2.550 ~ 200
1 auf Anfrage 1052 ~ 350 ~ 200
1 auf Anfrage 105.52 ~ 3.550 ~ 200
1 auf Anfrage 1062.5 ~ 450 ~ 250
1 auf Anfrage 106.52.5 ~ 450 ~ 250
1 auf Anfrage 1072.5 ~ 550 ~ 250
1 auf Anfrage 107.53 ~ 550 ~ 250
1 auf Anfrage 1084 ~ 650 ~ 250
1 auf Anfrage 1096 ~ 780 ~ 300
1 auf Anfrage 10106 ~ 880 ~ 300

Loading...

  1. 1

Grundlegende Informationen

Zusammensetzung des Produkts Einzelne Hülse Material SKD61 Oberflächenbehandlung Nitriert
Dicke des Kopfes 4mm(T4) Toleranz des Wellendurchmessers -0.01/-0.02 Konzentrizität zwischen dem Bohrungs- und dem Wellendurchmesser ◎0.03
Bohrverfahren Reaming Innendurchmessertoleranz H7 Verjüngt oder nicht Nein
Spitzenform Nein Technischer Standard JIS

Technischer Support