Druckfedern / UF, UR, UV, UY / Edelstahl / spiralförmig / Runddraht / 45% bezogen auf AD (UR6-45)
- Sonderpreis
- Mengenrabatt
Produktdetails:
Hersteller-Teilenummer: UR6-45
Marke: MISUMI
Preis: 1.36 €
Lieferzeit: 5 Arbeitstage
Technische Daten:
Zulässige Last (konfigurierbare Bereich): 4.51 bis 8.50 N
Enden, Oberflächenstatus: Nicht geerdet
Maximallast: 7.9 N
Höhe nach eingesetzter max. Last L-F: 18 mm
Freie Länge L: 45 mm
- Bestellmengen erweitert (D-JIT)
- Auf Lager
(i)Hinweis
- Bitte prüfen Sie den Inhalt auf unserer Website, da die PDF-Datei nicht die aktuellsten Informationen enthält.
Einheitenbeispiel bezogen auf diese Kategorie
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
UR6-45
- Zeichnung/Spezifikationen
- 3D-Vorschau Die 3D-Vorschau ist nach vollständiger Konfiguration verfügbar
- Teilenummern
- Katalog
- Technische Informationen
Werkstoff EN 1.4301 (WPB) äquivalent Federkonstante ±10%
Spezifikationen
| Teilenummer |
| UY4-25 UR13-60 UF8-70 |
■UV: Fmax. (Zulässige Auslenkung) =LxFa%
| Teilenummer | d | Feste Länge | F max. | N{kgf}max. | Fa% | Stückpreis | |
| Ausführung D-L | |||||||
| UV3- | 5 | 0.15 | 1.1 | 3.5 | 0.18{0.018} | 70 | |
| 10 | 0.18 | 2.5 | 7 | 0.35{0.036} | |||
| 15 | 0.18 | 2.5 | 10.5 | 0.53{0.054} | |||
| 20 | 0.20 | 3.3 | 14 | 0.70{0.071} | |||
| 25 | 0.23 | 6.2 | 17.5 | 0.88{0.089} | |||
| 30 | 0.23 | 6.2 | 21 | 1.05{0.107} | |||
| UV4- | 5 | 0.18 | 1.2 | 3.5 | 0.18{0.018} | ||
| 10 | 0.20 | 1.7 | 7 | 0.35{0.036} | |||
| 15 | 0.23 | 3.0 | 10.5 | 0.53{0.054} | |||
| 20 | 0.23 | 3.0 | 14 | 0.70{0.071} | |||
| 25 | 0.26 | 4.9 | 17.5 | 0.88{0.089} | |||
| 30 | 0.26 | 4.9 | 21 | 1.05{0.107} | |||
| UV5- | 5 | 0.20 | 1.2 | 3.5 | 0.18{0.018} | ||
| 10 | 0.23 | 1.8 | 7 | 0.35{0.036} | |||
| 15 | 0.26 | 2.9 | 10.5 | 0.53{0.054} | |||
| 20 | 0.29 | 4.5 | 14 | 0.70{0.071} | |||
| 25 | 0.29 | 4.5 | 17.5 | 0.88{0.089} | |||
| 30 | 0.29 | 4.5 | 21 | 1.05{0.107} | |||
| UV6- | 10 | 0.26 | 2.0 | 7 | 0.35{0.036} | ||
| 15 | 0.30 | 3.3 | 10.5 | 0.53{0.054} | |||
| 20 | 0.30 | 3.3 | 14 | 0.70{0.071} | |||
| 25 | 0.35 | 6.5 | 17.5 | 0.88{0.089} | |||
| 30 | 0.35 | 6.5 | 21 | 1.05{0.107} | |||
| 35 | 0.35 | 6.5 | 24.5 | 1.23{0.125} | |||
| 40 | 0.35 | 6.5 | 28 | 1.40{0.143} | |||
| UV8- | 10 | 0.30 | 1.9 | 7 | 0.35{0.036} | ||
| 15 | 0.35 | 3.2 | 10.5 | 0.53{0.054} | |||
| 20 | 0.35 | 3.2 | 14 | 0.70{0.071} | |||
| 25 | 0.40 | 5.6 | 17.5 | 0.88{0.089} | |||
| 30 | 0.40 | 5.6 | 21 | 1.05{0.107} | |||
| 35 | 0.40 | 5.6 | 24.5 | 1.23{0.125} | |||
| 40 | 0.45 | 9.3 | 28 | 1.40{0.143} | |||
| 45 | 0.45 | 9.3 | 31.5 | 1.58{0.161} | |||
| 50 | 0.45 | 9.3 | 35 | 1.75{0.179} | |||
■UY: Fmax. (Zulässige Auslenkung) =LxFa%
■UR: Fmax. (Zulässige Auslenkung) =LxFa%
Beide Enden der Ausführung UR sind nicht geschliffen.
Die Werte für feste Länge sind nur Referenzwerte.
Je nach Charge können diese leicht variieren.
Gebrauchshäufigkeit: 1 Million Mal
■UF: Fmax. (Zulässige Auslenkung) =Lx45%
kgf (Last)=N/mm (Federkonstante) x0.101972xF (Auslenkung)
{kgf}=Nx0.101972
Beide Enden der mit * gekennzeichneten Ausführungen UF sind nicht geschliffen.
Die Werte für feste Länge sind nur Referenzwerte.
Je nach Charge können diese leicht variieren.
Gebrauchshäufigkeit: 1 Million Mal
| Teilenummer | d | Feste Länge | F max. | N{kgf}max. | Fa% | Stückpreis | |
| Ausführung D-L | |||||||
| UY2- | 5 | 0.13 | 1.5 | 3 | 0.15{0.015} | 60 | |
| 10 | 0.13 | 1.5 | 6 | 0.29{0.03} | |||
| 15 | 0.15 | 2.7 | 9 | 0.44{0.045} | |||
| 20 | 0.15 | 2.7 | 12 | 0.59{0.06} | |||
| 25 | 0.18 | 6.3 | 15 | 0.74{0.075} | |||
| 30 | 0.18 | 6.3 | 18 | 0.88{0.09} | |||
| UY3- | 5 | 0.16 | 0.92 | 3.75 | 0.37{0.0375} | 75 | |
| 10 | 0.2 | 2 | 7.5 | 0.74{0.075} | |||
| 15 | 0.23 | 3.45 | 11.25 | 1.10{0.1125} | |||
| 20 | 0.23 | 3.45 | 15 | 1.47{0.15} | |||
| 25 | 0.26 | 6.24 | 15 | 1.47{0.15} | 60 | ||
| 30 | 0.26 | 6.24 | 18 | 1.77{0.18} | |||
| UY4- | 5 | 0.2 | 1.05 | 3.75 | 0.37{0.0375} | 75 | |
| 10 | 0.23 | 1.84 | 7.5 | 0.74{0.075} | |||
| 15 | 0.26 | 2.86 | 11.25 | 1.10{0.1125} | |||
| 20 | 0.29 | 4.64 | 15 | 1.47{0.15} | |||
| 25 | 0.3 | 5.4 | 18.75 | 1.84{0.1875} | |||
| 30 | 0.3 | 5.4 | 22.5 | 2.26{0.23} | |||
| UY5- | 5 | 0.23 | 1.15 | 3.75 | 0.37{0.0375} | 75 | |
| 10 | 0.26 | 1.82 | 7.5 | 0.74{0.075} | |||
| 15 | 0.3 | 3.15 | 11.25 | 1.10{0.1125} | |||
| 20 | 0.3 | 3.15 | 15 | 1.47{0.15} | |||
| 25 | 0.32 | 4.16 | 18.75 | 1.84{0.1875} | |||
| 30 | 0.32 | 4.16 | 22.5 | 2.26{0.23} | |||
| 35 | 0.35 | 6 | 26.25 | 2.55{0.26} | |||
| 40 | 0.35 | 6 | 30 | 2.94{0.3} | |||
| UY6- | 5 | 0.26 | 1.24 | 3.5 | 0.34{0.035} | 70 | |
| 10 | 0.3 | 2.1 | 7.5 | 0.74{0.075} | 75 | ||
| 15 | 0.32 | 2.64 | 11.25 | 1.10{0.1125} | |||
| 20 | 0.35 | 3.85 | 15 | 1.47{0.15} | |||
| 25 | 0.38 | 5.32 | 18.75 | 1.84{0.1875} | |||
| 30 | 0.4 | 6.8 | 22.5 | 2.21{0.225} | |||
| 35 | 0.4 | 6.8 | 26.25 | 2.55{0.26} | |||
| 40 | 0.4 | 6.8 | 30 | 2.94{0.3} | |||
| UY8- | 10 | 0.35 | 2.19 | 7.5 | 0.74{0.075} | 75 | |
| 15 | 0.4 | 3.4 | 11.25 | 1.10{0.1125} | |||
| 20 | 0.4 | 3.4 | 15 | 1.47{0.15} | |||
| 25 | 0.45 | 5.4 | 18.75 | 1.84{0.1875} | |||
| 30 | 0.45 | 5.4 | 22.5 | 2.21{0.225} | |||
| 35 | 0.5 | 8.3 | 26.25 | 2.55{0.26} | |||
| 40 | 0.5 | 8.3 | 30 | 2.94{0.3} | |||
| 45 | 0.5 | 8.3 | 33.75 | 3.33{0.34} | |||
| 50 | 0.55 | 12.7 | 35 | 3.43{0.35} | 70 | ||
| UY10- | 10 | 0.5 | 3.25 | 6 | 1.18{0.12} | 60 | |
| 15 | 0.5 | 3.25 | 11.25 | 2.21{0.225} | 75 | ||
| 20 | 0.55 | 4.4 | 15 | 2.94{0.3} | |||
| 25 | 0.55 | 4.4 | 18.75 | 3.68{0.375} | |||
| 30 | 0.6 | 6.15 | 22.5 | 4.41{0.45} | |||
| 35 | 0.6 | 6.3 | 26.25 | 5.10{0.52} | |||
| 40 | 0.6 | 6.3 | 30 | 5.88{0.6} | |||
| 45 | 0.65 | 8.45 | 33.75 | 6.62{0.675} | |||
| 50 | 0.65 | 8.45 | 37.5 | 7.35{0.75} | |||
| UY12- | 15 | 0.55 | 3.3 | 11.25 | 2.206{0.225} | 75 | |
| 20 | 0.55 | 3.3 | 15 | 2.942{0.3} | |||
| 25 | 0.6 | 4.2 | 18.75 | 3.68{0.375} | |||
| 30 | 0.65 | 5.53 | 22.5 | 4.41{0.45} | |||
| 35 | 0.65 | 5.53 | 26.25 | 5.15{0.525} | |||
| 40 | 0.7 | 7.35 | 30 | 5.88{0.6} | |||
| 45 | 0.7 | 7.35 | 33.75 | 6.62{0.675} | |||
| 50 | 0.7 | 7.35 | 37.5 | 7.35{0.75} | |||
| 60 | 0.8 | 13.6 | 45 | 8.83{0.9} | |||
| 70 | 0.8 | 13.6 | 52.5 | 10.30{1.05} | |||
| 80 | 0.8 | 13.6 | 60 | 11.77{1.2} | |||
| UY13- | 15 | 0.6 | 3.75 | 10.5 | 2.06{0.21} | 70 | |
| 20 | 0.6 | 3.75 | 15 | 2.94{0.3} | 75 | ||
| 25 | 0.65 | 4.9 | 18.75 | 3.68{0.375} | |||
| 30 | 0.65 | 4.9 | 22.5 | 4.41{0.45} | |||
| 35 | 0.7 | 6.3 | 26.25 | 5.15{0.525} | |||
| 40 | 0.75 | 8.25 | 30 | 5.88{0.6} | |||
| 45 | 0.75 | 8.25 | 33.75 | 6.62{0.675} | |||
| 50 | 0.8 | 11.2 | 37.5 | 7.35{0.75} | |||
| 60 | 0.8 | 11.2 | 45 | 8.83{0.9} | |||
| 70 | 0.85 | 14.45 | 52.5 | 10.30{1.05} | |||
| 80 | 0.85 | 14.45 | 60 | 11.77{1.2} | |||
| UY16- | 15 | 0.7 | 4.2 | 9 | 1.77{0.18} | 60 | |
| 20 | 0.7 | 4.2 | 15 | 2.94{0.3} | 75 | ||
| 25 | 0.7 | 4.2 | 18.75 | 3.68{0.375} | |||
| 30 | 0.75 | 5.44 | 22.5 | 4.41{0.45} | |||
| 35 | 0.8 | 6.8 | 26.25 | 5.15{0.525} | |||
| 40 | 0.8 | 6.8 | 30 | 5.88{0.6} | |||
| 45 | 0.85 | 8.5 | 33.75 | 6.62{0.675} | |||
| 50 | 0.9 | 10.8 | 37.5 | 7.35{0.75} | |||
| 60 | 0.9 | 10.8 | 45 | 8.83{0.9} | |||
| 70 | 1 | 17 | 52.5 | 10.30{1.05} | |||
| 80 | 1 | 17 | 60 | 11.77{1.2} | |||
| UY20- | 20 | 0.9 | 5.4 | 12 | 3.53{0.36} | 60 | |
| 25 | 0.9 | 5.4 | 18.75 | 5.49{0.56} | 75 | ||
| 30 | 0.9 | 5.4 | 22.5 | 6.62{0.675} | |||
| 35 | 1 | 7.5 | 26.25 | 7.65{0.78} | |||
| 40 | 1 | 7.5 | 30 | 8.83{0.9} | |||
| 45 | 1 | 7.5 | 33.75 | 9.90{1.01} | |||
| 50 | 1.1 | 11 | 37.5 | 11.03{1.125} | |||
| 60 | 1.1 | 11 | 45 | 13.24{1.35} | |||
| 70 | 1.2 | 15.6 | 52.5 | 15.45{1.58} | |||
| 80 | 1.2 | 15.6 | 60 | 17.65{1.8} | |||
■UR: Fmax. (Zulässige Auslenkung) =LxFa%
| Teilenummer | d | Feste Länge | F max. | N{kgf}max. | Fa% | Stückpreis | |
| Ausführung D-L | |||||||
| UR2- | 5 | 0.18 | 2.0 | 2.5 | 0.49{0.05} | 50 | |
| 10 | 0.18 | 2.0 | 5 | 0.98{0.1} | |||
| 15 | 0.23 | 6.0 | 7.5 | 1.5{0.15} | |||
| 20 | 0.23 | 6.0 | 10 | 2.0{0.2} | |||
| 25 | 0.26 | 11.2 | 12.5 | 2.5{0.25} | |||
| 30 | 0.26 | 11.2 | 15 | 2.9{0.3} | |||
| UR3- | 5 | 0.23 | 1.6 | 3 | 0.9{0.09} | 60 | |
| 10 | 0.25 | 2.1 | 6 | 1.8{0.18} | |||
| 15 | 0.3 | 4.5 | 9 | 2.6{0.27} | |||
| 20 | 0.3 | 4.5 | 12 | 3.5{0.36} | |||
| 25 | 0.32 | 6.4 | 15 | 4.4{0.45} | |||
| 30 | 0.32 | 6.4 | 18 | 5.3{0.54} | |||
| 35 | 0.35 | 9.8 | 21 | 6.2{0.63} | |||
| 40 | 0.35 | 9.8 | 24 | 7.1{0.72} | |||
| UR4- | 5 | 0.26 | 1.4 | 3 | 0.9{0.09} | 60 | |
| 10 | 0.29 | 2 | 6 | 1.8{0.18} | |||
| 15 | 0.32 | 3 | 9 | 2.6{0.27} | |||
| 20 | 0.38 | 6.1 | 12 | 3.5{0.36} | |||
| 25 | 0.38 | 6.1 | 15 | 4.4{0.45} | |||
| 30 | 0.40 | 8 | 18 | 5.3{0.54} | |||
| 35 | 0.40 | 8 | 21 | 6.2{0.63} | |||
| 40 | 0.45 | 14.4 | 24 | 7.1{0.72} | |||
| 45 | 0.45 | 14.4 | 27 | 7.9{0.81} | |||
| 50 | 0.45 | 14.4 | 30 | 8.8{0.9} | |||
| 60 | 0.5 | 23 | 36 | 10.6{1.08} | |||
| UR5- | 5 | 0.3 | 1.65 | 3 | 0.9{0.09} | 60 | |
| 10 | 0.35 | 2.71 | 6 | 1.8{0.18} | |||
| 15 | 0.38 | 3.61 | 9 | 2.6{0.27} | |||
| 20 | 0.38 | 3.61 | 12 | 3.5{0.36} | |||
| 25 | 0.45 | 7.43 | 15 | 4.4{0.45} | |||
| 30 | 0.45 | 7.43 | 18 | 5.3{0.54} | |||
| 35 | 0.5 | 12.25 | 21 | 6.2{0.63} | |||
| 40 | 0.5 | 12.25 | 24 | 7.1{0.72} | |||
| 45 | 0.5 | 12.25 | 27 | 7.9{0.81} | |||
| 50 | 0.55 | 19.53 | 30 | 8.8{0.9} | |||
| 60 | 0.55 | 19.53 | 36 | 10.6{1.08} | |||
| UR6- | 5 | 0.32 | 1.5 | 3 | 0.9{0.09} | 60 | |
| 10 | 0.4 | 3 | 6 | 1.8{0.18} | |||
| 15 | 0.4 | 3 | 9 | 2.6{0.27} | |||
| 20 | 0.5 | 7 | 12 | 3.5{0.36} | |||
| 25 | 0.5 | 7 | 15 | 4.4{0.45} | |||
| 30 | 0.5 | 7 | 18 | 5.3{0.54} | |||
| 35 | 0.55 | 11 | 21 | 6.2{0.63} | |||
| 40 | 0.55 | 11 | 24 | 7.1{0.72} | |||
| 45 | 0.6 | 17.4 | 27 | 7.9{0.81} | |||
| 50 | 0.6 | 17.4 | 30 | 8.8{0.9} | |||
| 60 | 0.65 | 23.4 | 36 | 10.6{1.08} | |||
| 70 | 0.65 | 23.4 | 42 | 12.4{1.26} | |||
| UR8- | 10 | 0.45 | 2.6 | 6 | 1.8{0.18} | 60 | |
| 15 | 0.5 | 3.6 | 9 | 2.6{0.27} | |||
| 20 | 0.5 | 3.6 | 12 | 3.5{0.36} | |||
| 25 | 0.55 | 5.9 | 15 | 4.4{0.45} | |||
| 30 | 0.65 | 10.4 | 18 | 5.3{0.54} | |||
| 35 | 0.65 | 10.4 | 21 | 6.2{0.63} | |||
| 40 | 0.7 | 15.4 | 24 | 7.1{0.72} | |||
| 45 | 0.75 | 21 | 22 | 6.3{0.66} | 50 | ||
| 50 | 0.75 | 21 | 27 | 7.8{0.81} | 55 | ||
| 60 | 0.8 | 27.6 | 31 | 8.9{0.93} | 52 | ||
| 70 | 0.8 | 27.6 | 39.9 | 11.6{1.20} | 57 | ||
| 80 | 0.8 | 27.6 | 48 | 14.1{1.44} | 60 | ||
| UR10- | 10 | 0.55 | 3.3 | 6 | 1.8{0.18} | 60 | |
| 15 | 0.6 | 4.2 | 9 | 2.6{0.27} | |||
| 20 | 0.65 | 6.2 | 12 | 3.5{0.36} | |||
| 25 | 0.65 | 6.2 | 15 | 4.4{0.45} | |||
| 30 | 0.7 | 8.4 | 18 | 5.3{0.54} | |||
| 35 | 0.7 | 8.4 | 21 | 6.2{0.63} | |||
| 40 | 0.7 | 8.4 | 24 | 7.1{0.72} | |||
| 45 | 0.8 | 15.2 | 27 | 7.9{0.81} | |||
| 50 | 0.8 | 15.2 | 30 | 8.8{0.9} | |||
| 60 | 0.85 | 20.4 | 36 | 10.6{1.08} | |||
| 70 | 0.85 | 20.4 | 42 | 12.4{1.26} | |||
| 80 | 0.85 | 20.4 | 48 | 14.1{1.44} | |||
| UR12- | 15 | 0.6 | 3.5 | 9 | 2.6{0.27} | 60 | |
| 20 | 0.7 | 5.6 | 12 | 3.5{0.36} | |||
| 25 | 0.7 | 5.6 | 15 | 4.4{0.45} | |||
| 30 | 0.8 | 9.6 | 18 | 5.3{0.54} | |||
| 35 | 0.8 | 9.6 | 21 | 6.2{0.63} | |||
| 40 | 0.8 | 9.6 | 24 | 7.1{0.72} | |||
| 45 | 0.9 | 16.2 | 27 | 7.9{0.81} | |||
| 50 | 0.9 | 16.2 | 30 | 8.8{0.9} | |||
| 60 | 0.9 | 16.2 | 36 | 10.6{1.08} | |||
| 70 | 1 | 26 | 42 | 12.4{1.26} | |||
| 80 | 1 | 26 | 48 | 14.1{1.44} | |||
| UR13- | 15 | 0.7 | 4.7 | 9 | 2.6{0.27} | 60 | |
| 20 | 0.7 | 4.7 | 12 | 3.5{0.36} | |||
| 25 | 0.8 | 8 | 15 | 4.4{0.45} | |||
| 30 | 0.8 | 8 | 18 | 5.3{0.54} | |||
| 35 | 0.8 | 8 | 21 | 6.2{0.63} | |||
| 40 | 0.9 | 12.8 | 24 | 7.1{0.72} | |||
| 45 | 0.9 | 12.8 | 27 | 7.9{0.81} | |||
| 50 | 0.9 | 12.8 | 30 | 8.8{0.9} | |||
| 60 | 1.0 | 21 | 36 | 10.6{1.08} | |||
| 70 | 1.0 | 21 | 42 | 12.4{1.26} | |||
| 80 | 1.0 | 21 | 48 | 14.1{1.44} | |||
| UR16- | 15 | 0.75 | 4.3 | 9 | 2.6{0.27} | 60 | |
| 20 | 0.8 | 5.4 | 12 | 3.5{0.36} | |||
| 25 | 0.9 | 7.7 | 15 | 4.4{0.45} | |||
| 30 | 0.9 | 7.7 | 18 | 5.3{0.54} | |||
| 35 | 1.0 | 12 | 21 | 6.2{0.63} | |||
| 40 | 1.0 | 12 | 24 | 7.1{0.72} | |||
| 45 | 1.0 | 12 | 27 | 7.9{0.81} | |||
| 50 | 1.1 | 19 | 30 | 8.8{0.9} | |||
| 60 | 1.1 | 19 | 36 | 10.6{1.08} | |||
| 70 | 1.2 | 26.4 | 42 | 12.4{1.26} | |||
| 80 | 1.2 | 26.4 | 48 | 14.1{1.44} | |||
| UR20- | 20 | 1.0 | 6 | 12 | 5.9{0.6} | 60 | |
| 25 | 1.1 | 7.7 | 15 | 7.4{0.75} | |||
| 30 | 1.1 | 7.7 | 18 | 8.8{0.9} | |||
| 35 | 1.2 | 10.8 | 21 | 10.3{1.05} | |||
| 40 | 1.2 | 10.8 | 24 | 11.8{1.2} | |||
| 45 | 1.3 | 14.3 | 27 | 13.2{1.35} | |||
| 50 | 1.3 | 14.3 | 30 | 14.7{1.5} | |||
| 60 | 1.4 | 19.6 | 36 | 17.7{1.8} | |||
| 70 | 1.4 | 19.6 | 42 | 20.6{2.1} | |||
| 80 | 1.5 | 27 | 48 | 23.5{2.4} | |||
Die Werte für feste Länge sind nur Referenzwerte.
Je nach Charge können diese leicht variieren.
Gebrauchshäufigkeit: 1 Million Mal
■UF: Fmax. (Zulässige Auslenkung) =Lx45%
| Teilenummer | d | Feste Länge | F max. | N{kgf}max. | Stückpreis | |
| Ausführung D-L | ||||||
| UF 2- | 5* | 0.2 | 2.35 | 2.25 | 0.66 {0.068} | |
| 10* | 0.2 | 2.35 | 4.5 | 1.3 {0.14} | ||
| 15* | 0.26 | 7.8 | 6.7 | 2.0 {0.20} | ||
| 20* | 0.26 | 7.8 | 9 | 2.7 {0.27} | ||
| 25* | 0.29 | 13.6 | 11.2 | 3.3 {0.34} | ||
| 30* | 0.29 | 13.6 | 13.5 | 4.0 {0.41} | ||
| UF 3- | 5* | 0.26 | 1.8 | 2.25 | 1.1{0.11} | |
| 10* | 0.32 | 4.5 | 4.5 | 2.2{0.22} | ||
| 15* | 0.32 | 4.5 | 6.7 | 3.2{0.33} | ||
| 20* | 0.35 | 6.3 | 9 | 4.4{0.45} | ||
| 25* | 0.35 | 6.3 | 11.2 | 5.5{0.56} | ||
| 30* | 0.4 | 12.4 | 13.5 | 6.6{0.67} | ||
| 35* | 0.4 | 12.4 | 15.7 | 7.6{0.78} | ||
| 40* | 0.4 | 12.4 | 18 | 8.8{0.9} | ||
| UF 4- | 5* | 0.32 | 2 | 2.25 | 1.1{0.11} | |
| 10* | 0.35 | 3 | 4.5 | 2.2{0.22} | ||
| 15* | 0.4 | 5.2 | 6.7 | 3.2{0.33} | ||
| 20* | 0.4 | 5.2 | 9 | 4.4{0.45} | ||
| 25* | 0.45 | 9.5 | 11.2 | 5.5{0.56} | ||
| 30* | 0.45 | 9.5 | 13.5 | 6.6{0.67} | ||
| 35* | 0.5 | 15.5 | 15.7 | 7.6{0.78} | ||
| 40* | 0.5 | 15.5 | 18 | 8.8{0.9} | ||
| 45* | 0.5 | 15.5 | 20 | 9.8{1} | ||
| 50* | 0.5 | 15.5 | 22.5 | 10.8{1.1} | ||
| 60* | 0.55 | 22.6 | 27 | 12.7{1.3} | ||
| UF 5- | 5* | 0.35 | 2.01 | 2.25 | 1.1{0.11} | |
| 10* | 0.4 | 3.2 | 4.5 | 2.2{0.23} | ||
| 15* | 0.4 | 3.2 | 6.75 | 3.3{0.34} | ||
| 20* | 0.45 | 4.95 | 9 | 4.4{0.45} | ||
| 25* | 0.45 | 4.95 | 11.25 | 5.5{0.56} | ||
| 30* | 0.5 | 7.75 | 13.5 | 6.7{0.68} | ||
| 35* | 0.5 | 7.75 | 15.75 | 7.7{0.79} | ||
| 40 | 0.6 | 19.5 | 18 | 8.8{0.9} | ||
| 45 | 0.6 | 19.5 | 20.25 | 10{1.01} | ||
| 50 | 0.6 | 19.5 | 22.5 | 11.2{1.13} | ||
| 60 | 0.65 | 27.95 | 27 | 13.4{1.35} | ||
| UF 6- | 5* | 0.4 | 2.2 | 2.25 | 1.1{0.11} | |
| 10* | 0.5 | 5 | 4.5 | 2.2{0.22} | ||
| 15* | 0.55 | 7.7 | 6.7 | 3.2{0.33} | ||
| 20* | 0.55 | 7.7 | 9 | 4.4{0.45} | ||
| 25 | 0.6 | 10.8 | 11.2 | 5.5{0.56} | ||
| 30 | 0.65 | 15.6 | 13.5 | 6.6{0.67} | ||
| 35 | 0.65 | 15.6 | 15.7 | 7.6{0.78} | ||
| 40 | 0.65 | 15.6 | 18 | 8.8{0.9} | ||
| 45 | 0.65 | 15.6 | 20 | 9.8{1} | ||
| 50 | 0.7 | 23.1 | 22.5 | 10.8{1.1} | ||
| 60 | 0.7 | 23.1 | 27 | 12.7{1.3} | ||
| 70 | 0.75 | 30.8 | 31.5 | 14.7{1.5} | ||
| UF 8- | 10 | 0.6 | 5.4 | 4.5 | 2.2{0.22} | |
| 15 | 0.65 | 7.2 | 6.7 | 3.2{0.33} | ||
| 20 | 0.7 | 10.5 | 9 | 4.4{0.45} | ||
| 25 | 0.7 | 10.5 | 11.2 | 5.5{0.56} | ||
| 30 | 0.75 | 13.5 | 13.5 | 6.6{0.67} | ||
| 35 | 0.75 | 13.5 | 15.7 | 7.6{0.78} | ||
| 40 | 0.8 | 18.4 | 18 | 8.8{0.9} | ||
| 45 | 0.8 | 18.4 | 20 | 9.8{1} | ||
| 50 | 0.8 | 18.4 | 22.5 | 10.8{1.1} | ||
| 60 | 0.85 | 26.4 | 27 | 12.7{1.3} | ||
| 70 | 0.85 | 26.4 | 31.5 | 14.7{1.5} | ||
| 80 | 0.85 | 26.4 | 36 | 17.7{1.8} | ||
| UF10- | 10 | 0.65 | 4.6 | 4.5 | 2.2{0.22} | |
| 15 | 0.65 | 4.6 | 6.7 | 3.2{0.33} | ||
| 20 | 0.8 | 9.6 | 9 | 4.4{0.45} | ||
| 25 | 0.8 | 9.6 | 11.2 | 5.5{0.56} | ||
| 30 | 0.85 | 12.8 | 13.5 | 6.6{0.67} | ||
| 35 | 0.85 | 12.8 | 15.7 | 7.6{0.78} | ||
| 40 | 0.9 | 17 | 18 | 8.8{0.9} | ||
| 45 | 0.9 | 17 | 20 | 9.8{1} | ||
| 50 | 0.9 | 17 | 22.5 | 10.8{1.1} | ||
| 60 | 1.0 | 28 | 27 | 12.7{1.3} | ||
| 70 | 1.0 | 28 | 31.5 | 14.7{1.5} | ||
| 80 | 1.0 | 28 | 36 | 17.7{1.8} | ||
| UF12- | 15 | 0.8 | 6.8 | 6.7 | 3.2{0.33} | |
| 20 | 0.8 | 6.8 | 9 | 4.4{0.45} | ||
| 25 | 0.8 | 6.8 | 11.2 | 5.5{0.56} | ||
| 30 | 0.9 | 10.8 | 13.5 | 6.6{0.67} | ||
| 35 | 1.0 | 17 | 15.7 | 7.6{0.78} | ||
| 40 | 1.0 | 17 | 18 | 8.8{0.9} | ||
| 45 | 1.0 | 17 | 20 | 9.8{1} | ||
| 50 | 1.1 | 26.4 | 22.5 | 10.8{1.1} | ||
| 60 | 1.1 | 26.4 | 27 | 12.7{1.3} | ||
| 70 | 1.1 | 26.4 | 31.5 | 14.7{1.5} | ||
| 80 | 1.2 | 39.6 | 36 | 17.7{1.8} | ||
| UF13- | 15 | 0.8 | 5.6 | 6.7 | 3.2{0.33} | |
| 20 | 0.8 | 5.6 | 9 | 4.4{0.45} | ||
| 25 | 0.85 | 7.2 | 11.2 | 5.5{0.56} | ||
| 30 | 1.0 | 14 | 13.5 | 6.6{0.67} | ||
| 35 | 1.0 | 14 | 15.7 | 7.6{0.78} | ||
| 40 | 1.0 | 14 | 18 | 8.8{0.9} | ||
| 45 | 1.1 | 21.5 | 20 | 9.8{1} | ||
| 50 | 1.1 | 21.5 | 22.5 | 10.8{1.1} | ||
| 60 | 1.1 | 21.5 | 27 | 12.7{1.3} | ||
| 70 | 1.2 | 30 | 31.5 | 14.7{1.5} | ||
| 80 | 1.2 | 30 | 36 | 17.7{1.8} | ||
| UF16- | 15 | 0.9 | 5.6 | 6.7 | 3.2{0.33} | |
| 20 | 1.0 | 7.7 | 9 | 4.4{0.45} | ||
| 25 | 1.0 | 7.7 | 11.2 | 5.5{0.56} | ||
| 30 | 1.1 | 12.1 | 13.5 | 6.6{0.67} | ||
| 35 | 1.1 | 12.1 | 15.7 | 7.6{0.78} | ||
| 40 | 1.2 | 18 | 18 | 8.8{0.9} | ||
| 45 | 1.2 | 18 | 20 | 9.8{1} | ||
| 50 | 1.2 | 18 | 22.5 | 10.8{1.1} | ||
| 60 | 1.3 | 26 | 27 | 12.7{1.3} | ||
| 70 | 1.3 | 26 | 31.5 | 14.7{1.5} | ||
| 80 | 1.4 | 35 | 36 | 17.7{1.8} | ||
| UF20- | 20 | 1.2 | 7.2 | 9 | 8.8{0.9} | |
| 25 | 1.3 | 9.1 | 11.25 | 11.1{1.13} | ||
| 30 | 1.4 | 11.9 | 13.5 | 13.2{1.35} | ||
| 35 | 1.4 | 11.9 | 15.75 | 15.5{1.58} | ||
| 40 | 1.5 | 15.8 | 18 | 17.7{1.8} | ||
| 45 | 1.5 | 15.8 | 20.25 | 19.9{2.03} | ||
| 50 | 1.6 | 20.8 | 22.5 | 22.1{2.25} | ||
| 60 | 1.6 | 20.8 | 27 | 26.5{2.7} | ||
| 70 | 1.7 | 26.4 | 31.5 | 30.9{3.15} | ||
| 80 | 1.7 | 26.4 | 36 | 35.3{3.6} | ||
{kgf}=Nx0.101972
Beide Enden der mit * gekennzeichneten Ausführungen UF sind nicht geschliffen.
Die Werte für feste Länge sind nur Referenzwerte.
Je nach Charge können diese leicht variieren.
Gebrauchshäufigkeit: 1 Million Mal
■ Federkonstante
D12 ist nur für Ausführung UY, UR, UF, UL und UBB verfügbar. D14 ist nur für Ausführung UBB möglich.
D12 ist nur für Ausführung UY, UR, UF, UL und UBB verfügbar. D14 ist nur für Ausführung UBB möglich.
| Ausführung | UV | UY | UR | UF | UL | UTT | UM | UH | UBB | |||||||||||||||||||
| D | ||||||||||||||||||||||||||||
| 2 | 0.05{0.005} | 0.2{0.02} | 0.3{0.03} | 0.5{0.05} | ||||||||||||||||||||||||
| 3 | N/mm 0.05 {kgf/mm}{0.005} | N/mm 0.098 {kgf/mm}{0.01} | N/mm 0.29 {kgf/mm} {0.03} | N/mm 0.49 {kgf/mm} {0.05} | N/mm 0.98 {kgf/mm} {0.1} | 1.5{0.15} | ||||||||||||||||||||||
| 4 | 2.0 {0.2} | 2.9{0.3} | 4.9{0.5} | |||||||||||||||||||||||||
| 5 | N/mm 2.0 {kgf/mm} {0.2} | |||||||||||||||||||||||||||
| 6 | N/mm 2.9 {kgf/mm} {0.3} | N/mm 5.9 {kgf/mm} {0.6} | N/mm 9.8 {kgf/mm} {1.0} | |||||||||||||||||||||||||
| 8 | ||||||||||||||||||||||||||||
| 10 | N/mm 0.2 {kgf/mm} {0.02} | |||||||||||||||||||||||||||
| 12 | ||||||||||||||||||||||||||||
| 13 | N/mm 9.8 {kgf/mm} {1.0} | N/mm 19.6 {kgf/mm} {2.0} | ||||||||||||||||||||||||||
| 14 | ||||||||||||||||||||||||||||
| 16 | ||||||||||||||||||||||||||||
| 20 | 0.3{0.03} | 0.5{0.05} | 0.98{0.1} | 2.9{0.3} | 3.9{0.4} | 4.9{0.5} | 14.7{1.5} | 29.4{3.0} | ||||||||||||||||||||
| Fmax. | F=Lx70% | F = L × 75% | F=Lx60% | F = L × 45% | F=Lx40% | F=Lx40% | F = L × 35% | F = L × 30% | F = L × 25% | |||||||||||||||||||
Teilenummer:
- Um die 3D Vorschau anzeigen zu können, muss die Konfiguration abgeschlossen sein.
3D Vorschau nicht verfügbar, da noch keine Teilenummer generiert wurde.
Loading...
Teilenummer
|
|---|
| UR6-45 |
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | RoHS | Zulässige Last (konfigurierbare Bereich) (N) | Enden, Oberflächenstatus | Maximallast (N) | Höhe nach eingesetzter max. Last L-F (mm) | Freie Länge L (mm) | Außen-Ø D (oder D1) (mm) | Federkonstante (N/mm) | Draht-Ø (mm) | Feste Länge (mm) | Zulässige Auslenkung (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1.36 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 4.51 bis 8.50 | Nicht geerdet | 7.9 | 18 | 45 | 6 | 0.29 | 0.6 | 17.4 | 27 |
Loading...
Grundlegende Informationen
| Werkstoff | EN 1.4301 (WPB) Äquiv. |
|---|
Sie befinden sich auf der Seite für Druckfedern / UF, UR, UV, UY / Edelstahl / spiralförmig / Runddraht / 45% bezogen auf AD, die Teilenummer ist UR6-45.
Sie finden detaillierte Informationen über Spezifikation und Dimensionierung unter der Teilenummer UR6-45.
Konfigurieren
Basiseigenschaften
-
Ausführung
- UF
- UR
- UV
- UY
-
Zulässige Last (konfigurierbare Bereich)(N)
- Bis zu 1,50
- 1.51 bis 4.50
- 4.51 bis 8.50
- 8.51 bis 16.00
- 16.01 bis 30.00
- 30.01 bis 50.00
-
Enden, Oberflächenstatus
- Geerdet
- Nicht geerdet
-
Maximallast(N)
- 0.15
- 0.18
- 0.29
- 0.34
- 0.35
- 0.37
- 0.44
- 0.49
- 0.53
- 0.59
- 0.66
- 0.7
- 0.74
- 0.88
- 0.9
- 0.98
- 1.05
- 1.1
- 1.18
- 1.23
- 1.3
- 1.4
- 1.47
- 1.5
- 1.58
- 1.75
- 1.77
- 1.8
- 1.84
- 2
- 2.06
- 2.2
- 2.206
- 2.21
- 2.26
- 2.5
- 2.55
- 2.6
- 2.7
- 2.9
- 2.94
- 2.942
- 3.2
- 3.3
- 3.33
- 3.43
- 3.5
- 3.53
- 3.68
- 4
- 4.4
- 4.41
- 5.1
- 5.15
- 5.3
- 5.49
- 5.5
- 5.88
- 5.9
- 6.2
- 6.3
- 6.6
- 6.62
- 6.7
- 7.1
- 7.35
- 7.4
- 7.6
- 7.65
- 7.7
- 7.8
- 7.9
- 8.8
- 8.83
- 8.9
- 9.8
- 9.9
- 10
- 10.3
- 10.6
- 10.8
- 11.03
- 11.1
- 11.2
- 11.6
- 11.77
- 11.8
- 12.4
- 12.7
- 13.2
- 13.24
- 13.4
- 14.1
- 14.7
- 15.45
- 15.5
- 17.7
- 19.9
- 20.6
- 22.1
- 23.5
- 26.5
- 30.9
- 35.3
-
Höhe nach eingesetzter max. Last L-F(mm)
-
Freie Länge L(mm)
-
Außen-Ø D (oder D1)(mm)
-
Federkonstante(N/mm)
-
Draht-Ø(mm)
-
Feste Länge(mm)
- 0.92
- 1.05
- 1.1
- 1.15
- 1.2
- 1.24
- 1.4
- 1.5
- 1.6
- 1.65
- 1.7
- 1.8
- 1.82
- 1.84
- 1.9
- 2
- 2.01
- 2.1
- 2.19
- 2.2
- 2.35
- 2.5
- 2.6
- 2.64
- 2.7
- 2.71
- 2.9
- 3
- 3.15
- 3.2
- 3.25
- 3.3
- 3.4
- 3.45
- 3.5
- 3.6
- 3.61
- 3.75
- 3.85
- 4.16
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.64
- 4.7
- 4.9
- 4.95
- 5
- 5.2
- 5.32
- 5.4
- 5.44
- 5.53
- 5.6
- 6
- 6.1
- 6.15
- 6.2
- 6.24
- 6.3
- 6.4
- 6.5
- 6.8
- 7
- 7.2
- 7.35
- 7.43
- 7.5
- 7.7
- 7.75
- 7.8
- 8
- 8.25
- 8.3
- 8.4
- 8.45
- 8.5
- 9.1
- 9.3
- 9.5
- 9.6
- 9.8
- 10.4
- 10.5
- 10.8
- 11
- 11.2
- 11.9
- 12
- 12.1
- 12.25
- 12.4
- 12.7
- 12.8
- 13.5
- 13.6
- 14
- 14.3
- 14.4
- 14.45
- 15.2
- 15.4
- 15.5
- 15.6
- 15.8
- 16.2
- 17
- 17.4
- 18
- 18.4
- 19
- 19.5
- 19.53
- 19.6
- 20.4
- 20.8
- 21
- 21.5
- 22.6
- 23
- 23.1
- 23.4
- 26
- 26.4
- 27
- 27.6
- 27.95
- 28
- 30
- 30.8
- 35
- 39.6
-
Filtern nach CAD Format
- 2D
- 3D
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- Versand am selben Tag
- 5 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Produktvarianten
| Teilenummer |
|---|
| UF10-25 |
| UF10-30 |
| UF10-35 |
| UR6-5 |
| UR6-50 |
| UR6-60 |
| Teilenummer | Standard-Stückpreis | Mindestbestellmenge | Mengenrabatt | Reguläre Versanddauer ? | RoHS | Zulässige Last (konfigurierbare Bereich) (N) | Enden, Oberflächenstatus | Maximallast (N) | Höhe nach eingesetzter max. Last L-F (mm) | Freie Länge L (mm) | Außen-Ø D (oder D1) (mm) | Federkonstante (N/mm) | Draht-Ø (mm) | Feste Länge (mm) | Zulässige Auslenkung (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1.67 € | 1 | Verfügbar | 5 Arbeitstage | 10 | - | - | - | - | - | - | - | - | - | - | |
1.67 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 4.51 bis 8.50 | Geerdet | 6.6 | 16.5 | 30 | 10 | 0.49 | 0.85 | 12.8 | 13.5 | |
1.67 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 4.51 bis 8.50 | Geerdet | 7.6 | 19.3 | 35 | 10 | 0.49 | 0.85 | 12.8 | 15.7 | |
1.27 € | 1 | Verfügbar | 5 Arbeitstage | 10 | Bis zu 1,50 | Nicht geerdet | 0.9 | 2 | 5 | 6 | 0.29 | 0.32 | 1.5 | 3 | |
2.31 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 8.51 bis 16.00 | Nicht geerdet | 8.8 | 20 | 50 | 6 | 0.29 | 0.6 | 17.4 | 30 | |
1.53 € | 1 | Verfügbar |
Versand am selben Tag
Auf Lager | 10 | 8.51 bis 16.00 | Nicht geerdet | 10.6 | 24 | 60 | 6 | 0.29 | 0.65 | 23.4 | 36 |
Ergänzungsartikel
-
Halter für Zugfedern / Schlüsselflächen / Mit Kerbe
MISUMI Standardpreis 5.09 € Lieferzeit: Versand am selben Tag
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.