Selection workload reduction. Connector / Hood Package Deal
Rated Current: 3 A DC or less Rated Voltage: 250 VAC or less
Compatible Electric Wire Size: AWG23 ~ AWG30 or 0.2 mm2~ 0.05 mm2
·Mitsubishi Electric / Omron / Fuji Electric PLC Connector
· There are three kinds of set content Female Type Connector + Connector Hood
Male Type Connector + Connector Hood Female Type Connector + Male Type Connector + Connector Hood + Relay Type Hood
· For female and male connectors.
· For connector hoods (standard type).
· For connector hoods (relay type).
For FCN socket harnesses.
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
Model Number | Number of Cores |
SET-FCN-J-24 | 24 |
SET-FCN-J-40 | 40 |
SET-FCN-J-48 | 48 |
SET-FCN-P-24 | 24 |
SET-FCN-P-40 | 40 |
SET-FCN-P-48 | 48 |
SET-FCN-C-24 | 24 |
SET-FCN-C-40 | 40 |
SET-FCN-C-48 | 48 |
Teilenummer |
---|
SET-FCN-C-48 |
SET-FCN-J-48 |
SET-FCN-P-48 |
Teilenummer | Standard-Stückpreis | Mindestbestellmenge | Mengenrabatt | Reguläre Versanddauer ? | RoHS | Contact Model |
---|---|---|---|---|---|---|
22.83 € | 1 | Verfügbar | 6 Arbeitstage | 10 | Press Contact (Male / Female) | |
14.60 € | 1 | Verfügbar | 6 Arbeitstage | 10 | Press Contact (Female) | |
8.02 € | 1 | 6 Arbeitstage | 10 | Press Contact (Male) |
Loading...
Compatible Wire
Connector Type | Wire Size |
---|---|
Soldered Type | Loose wire of AWG23 ~ AWG30, or 0.2 mm2 ~ 0.05 mm2 |
Pressure Welding Type | 1.27 mm Pitch Flat Cable AWG28, AWG30 * Loose wires cannot be used. (Fused cables can be used) |
Material / Finish
Item | Material / Finish |
---|---|
Insulator | Polyester |
Contact | Copper Alloy / Gold Plating |
Contact Arrangement Diagram
Electrical Properties
Item | Characteristics | Conditions |
---|---|---|
Rated Current | 3 ADC (1 ADC for pressure welded type) or lower | Allowable current of single contact after coupling |
Rated Voltage | 250 VAC or less | Allowable voltage within operating temperature range |
Contact Resistance | 15 mΩ or less | Measured at 6 VDC, 0.3 A |
Insulation Resistance | 1000 MΩ or more | Between terminals and between ground & terminal are measured at 500 VDC |
Withstand Voltage | 500 VAC / 1 min | No abnormality to be found when 500 VDC is applied for 1 minute to the same location as the insulation resistance measurement. |
Operating Temperature Range | -55°C ~ +85°C | - |
Electrical Properties
Item | Characteristics | Conditions |
---|---|---|
Insertion and Extraction Force Per Single Pole | Insertion Force: 312 g or less, Extraction Force: 50 g or more | When male and female are inserted and extracted, the total extraction force is divided by each core number to convert into force per single pole |
Vibration Resistance | No interruption to power supplies of 1 μs or more. Matching contact resistance. | After mounting of compatible electric wires, under conditions of DC current of 100 mA passing through the terminals, it will provide vibrations at a total amplitude of 1.5 mm and vibration frequency of 10 ~ 55 Hz (1 minute reciprocal) in right angled 3 directions for 2 hours. |
Insertion and Removal Durability | Contact resistance at 20 mΩ or less. Matching insertion and extraction force per single pole. | Perform insertion-extraction 500 times at a speed of 600 times / hour. |
Environmental Properties
Item | Characteristics | Conditions |
---|---|---|
Temperature Resistance | Matching contact resistance, insulation resistance and withstand voltage. | Performs 5 cycles of -55°C ±0.3 for 30 minutes, 25°C ±10.5 for 10 ~ 15 minutes, 85°C ±0.3 for 30 minutes and 25°C ±10.5 for 10 ~ 15 minutes consecutively. |
Humidity Resistance | Matching contact resistance of 100 MΩ or more, insulation resistance and withstand voltage. | Remove after placing in conditions of temperature 40 ±2°C and relative humidity of 90 ~ 95% for 96 hours, remove water droplets and then leave at room humidity conditions for between 1 and 2 hours. |
Corrosion Resistance | Contact resistance at 20 mΩ or less. | After testing for 48 hours at saltwater concentration of 5% and temperature of 35°C, wash salt encrustation off with water and let dry. |
Connector x Hood Combination Table
Hood Connector | Resin Hood | Zinc Die-cast Hood | ||||
---|---|---|---|---|---|---|
Standard Screw | Long Screw | Hood for Relay | ||||
FCN-360C0**-B | FCN-360C0**-E | FCN-360C0**-C | FCN-360C040-H-E | |||
Male | Solder Type Connectors | FCN-361P0**-AU | ○ | ○ (8-, 16-core not available) | ○ (8-, 16-core not available) | ○ (40-core only) |
Female | Solder Type Connectors | FCN-361J0**-AU | ○ | ○ (8-, 16-core not available) | ○ (8-, 16-core not available) | ○ (40-core only) |
Pressure Welding Type Connector | FCN-367J0**-AU-F | x | x | x | x |
Series Name | FCN | Shape Model | Relay | Constitute Model | Hood + Connector |
---|---|---|---|---|---|
Number of Cores(Core) | 48 | Compatible Electric Wire Size(AWG) | 23 ~ 30 | Finished Outer Diameter (MAX)(mm) | 13 |
Lock Screw | M2.6 | EMI Protection Availability | N/A | Fixing System | Screw-fastened |
Wiring Method | Solder | Quantity(Set) | 1 |
MISUMI
Standardpreis 4.22 €
Lieferzeit: 6 Arbeitstage
MISUMI
Standardpreis 12.04 €
Lieferzeit: 6 Arbeitstage
EDAC
Standardpreis 12.67 €
Lieferzeit: 4 Arbeitstage
PROVERTHA
Standardpreis 3.25 €
Lieferzeit: 6 Arbeitstage
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.