Han Waterproof Connector Crimper

● A special tool for crimping E contacts and D contacts. Each series can be commonly used.

· Use the B model crimping tool as shown in the picture on the right when crimping a fat wire with a conducting cross-sectional area of 1.5 mm².
· A locator is necessary to carry out crimping with the B model tool. Select one that matches the contact. (Included with the A model).
· For B model tools, use a gauge pin and regularly adjust the crimping depth.
· 0999-000-0310 (0.14 – 4.0 mm²)
· 0999-000-0311 (0.14 – 2.5 mm²)