Carbide Straight Blade Radius End Mill, 2-Flute, Rounded Inner Model

Carbide Straight Blade Radius End Mill, 2-Flute, Rounded Inner Model

Klicken Sie auf dieses Bild, um es zu vergrößern.

Klicken Sie auf dieses Bild, um es zu vergrößern.

Teilenummer

Hier finden Sie die Teilenummern
zu dem gesuchten Artikel

Carbide Straight Blade Radius End Mill, 2-Flute, Rounded Inner Model:Related Image
Teilenummer
SRCREM4-[2.01-3.7/0.01]-[0.1-1.75/0.01]-[2-15/0.5]-[0.1-0.94/0.01]-[F,​T]
SRCREM6-[3.01-5.7/0.01]-[0.1-2.75/0.01]-[3-15/0.5]-[0.1-1.44/0.01]-[F,​T]
SRCREM8-[4.01-7.7/0.01]-[0.1-3.75/0.01]-[4-15/0.5]-[0.1-1.94/0.01]-[F,​T]
SRCREM10-[6.01-9.7/0.01]-[0.1-4.75/0.01]-[5-15/0.5]-[0.1-1.94/0.01]-[F,​T]
SRCREM12-[8.01-11.7/0.01]-[0.1-5.75/0.01]-[6-15/0.5]-[0.1-1.94/0.01]-[F,​T]
SRCREM16-[10.01-15.7/0.01]-[0.1-7.75/0.01]-[8-15/0.5]-[0.1-2.94/0.01]-[F,​T]
Teilenummer
Standard-Stückpreis
MindestbestellmengeMengenrabatt
Reguläre
Versanddauer
?
Shank Diameter d
(mm)
Overall Length L
(mm)
Bottom Blade Shape Flute Diameter (D)
(mm)
Flute Length (ℓ)
(mm)
Innar R (CR)
(mm)
Radius (R)
(mm)

-

1 7 Arbeitstage 450F (Flat) / T (Center Dented)2.01 ~ 3.72 ~ 150.1 ~ 0.940.1 ~ 1.75

-

1 7 Arbeitstage 660F (Flat) / T (Center Dented)3.01 ~ 5.73 ~ 150.1 ~ 1.440.1 ~ 2.75

-

1 7 Arbeitstage 860F (Flat) / T (Center Dented)4.01 ~ 7.74 ~ 150.1 ~ 1.940.1 ~ 3.75

-

1 7 Arbeitstage 1080F (Flat) / T (Center Dented)6.01 ~ 9.75 ~ 150.1 ~ 1.940.1 ~ 4.75

-

1 7 Arbeitstage 1280F (Flat) / T (Center Dented)8.01 ~ 11.76 ~ 150.1 ~ 1.940.1 ~ 5.75

-

1 7 Arbeitstage 16100F (Flat) / T (Center Dented)10.01 ~ 15.78 ~ 150.1 ~ 2.940.1 ~ 7.75

Loading...

  1. 1

Spezifikationen

Carbide Straight Blade Radius End Mill, 2-Flute, Rounded Inner Model:Related Image

[ ! ]Even if dimensions within the specifiable range are specified, depending on the combination of each dimension some products may be unable to be manufactured.

Model Number   Outer Diameter
D
0.01 mm Increment Designation
Radius
R
0.01 mm Increment Designation
Flute Length

0.5 mm Increment Designation
Inner Curve
CR
0.01 mm Increment Designation
Bottom Blade Shape
(Selection)
Large Diameter
D1
Overall Length
L
Shank Diameter
d
SRCREM 4 2.01 ~3.70 0.10 ≤ R ≤ (D - 0.2) / 2 2.0 ~ 15.0 0.10 ≤ CR ≤ (d - D - 0.1) / 2 T
(Dished)
F
(Flat)
Bottom Blade Shape>>P.608
2R + D + 0.1 50
6 3.01 ~5.70 3.0 ~ 15.0 60
8 4.01 ~7.70 4.0 ~ 15.0 60
10 6.01 ~9.70 5.0 ~ 15.0 80
12 8.01 ~ 11.70 6.0 ~ 15.0 80
16 10.01 ~ 15.70 8.0 ~ 15.0 100



For Cutting Conditions, Refer to >>Click here.

Grundlegende Informationen

Material Ultrafine Particulate Carbide Large Diameter D1(mm) 2CR + D + 0.1

Technischer Support