Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
[Merkmale]
-Alterationsfräser, der die Eckfasengröße von Hartmetallfräsern in 0,1 mm-Schritten festlegen kann
-Kann nachgeschliffen werden. Bitte informieren Sie sich auf der Seite "Nachschleifservice" über Einsatzverfahren, Leistungsspektrum, Preise usw.
-Alterationsfräser, der die Eckfasengröße von Hartmetallfräsern in 0,1 mm-Schritten festlegen kann
-Kann nachgeschliffen werden. Bitte informieren Sie sich auf der Seite "Nachschleifservice" über Einsatzverfahren, Leistungsspektrum, Preise usw.
- Non-Coated
- General Steel
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer | Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | Work Material | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Coating | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Processing Applications | Corner (C) (mm) | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 13 Arbeitstage | 2 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 3 | 2 | For High Hardness (Silicone-Based) | 4 | 40 | Flat Surface / Side Surface / Nut / Inclined Cutting | 0.1 ～ 0.5 | 1 | ||
| 1 | 13 Arbeitstage | 4 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 6 | 2 | For High Hardness (Silicone-Based) | 6 | 45 | Flat Surface / Side Surface / Nut / Inclined Cutting | 0.1 ～ 1 | 1 | ||
| 1 | 13 Arbeitstage | 5 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 7.5 | 2 | For High Hardness (Silicone-Based) | 6 | 45 | Flat Surface / Side Surface / Nut / Inclined Cutting | 0.1 ～ 1 | 1 | ||
| 1 | 13 Arbeitstage | 6 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 2 | For High Hardness (Silicone-Based) | 6 | 45 | Flat Surface / Side Surface / Nut / Inclined Cutting | 0.1 ～ 1.2 | 2 | ||
| 1 | 13 Arbeitstage | 8 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 12 | 2 | For High Hardness (Silicone-Based) | 8 | 60 | Flat Surface / Side Surface / Nut / Inclined Cutting | 0.1 ～ 1.4 | 2 | ||
| 1 | 13 Arbeitstage | 10 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 15 | 2 | For High Hardness (Silicone-Based) | 10 | 70 | Flat Surface / Side Surface / Nut / Inclined Cutting | 0.1 ～ 3 | 2 | ||
| 1 | 13 Arbeitstage | 12 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 18 | 2 | For High Hardness (Silicone-Based) | 12 | 75 | Flat Surface / Side Surface / Nut / Inclined Cutting | 0.1 ～ 3 | 2 | ||
| 1 | 13 Arbeitstage | 2 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 6 | 2 | For High Hardness (Silicone-Based) | 4 | 45 | Flat Surface / Side Surface / Nut / Inclined Cutting | 0.1 ～ 0.5 | 1 | ||
| 1 | 13 Arbeitstage | 3 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 2 | For High Hardness (Silicone-Based) | 6 | 45 | Flat Surface / Side Surface / Nut / Inclined Cutting | 0.1 ～ 0.7 | 1 | ||
| 1 | 13 Arbeitstage | 4 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 12 | 2 | For High Hardness (Silicone-Based) | 6 | 50 | Flat Surface / Side Surface / Nut / Inclined Cutting | 0.1 ～ 1 | 1 | ||
| 1 | 13 Arbeitstage | 10 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 30 | 2 | For High Hardness (Silicone-Based) | 10 | 80 | Flat Surface / Side Surface / Nut / Inclined Cutting | 0.1 ～ 3 | 2 | ||
| 1 | 13 Arbeitstage | 2 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 4 | 2 | For High Hardness (Silicone-Based) | 4 | 40 | Flat Surface / Side Surface / Nut / Inclined Cutting | 0.1 ～ 0.5 | 1 | ||
| 1 | 13 Arbeitstage | 4 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 8 | 2 | For High Hardness (Silicone-Based) | 6 | 45 | Flat Surface / Side Surface / Nut / Inclined Cutting | 0.1 ～ 1 | 1 | ||
| 1 | 13 Arbeitstage | 6 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 12 | 2 | For High Hardness (Silicone-Based) | 6 | 45 | Flat Surface / Side Surface / Nut / Inclined Cutting | 0.1 ～ 1.2 | 2 | ||
| 1 | 13 Arbeitstage | 4 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 10 | 2 | For High Hardness (Silicone-Based) | 6 | 50 | Flat Surface / Side Surface / Nut / Inclined Cutting | 0.1 ～ 1 | 1 | ||
| 1 | 13 Arbeitstage | 12 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 30 | 2 | For High Hardness (Silicone-Based) | 12 | 85 | Flat Surface / Side Surface / Nut / Inclined Cutting | 0.1 ～ 3 | 2 | ||
| 1 | 13 Arbeitstage | 3 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 4.5 | 4 | For High Hardness (Silicone-Based) | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ～ 0.7 | 1 | ||
| 1 | 13 Arbeitstage | 4 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 6 | 4 | For High Hardness (Silicone-Based) | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ～ 1 | 1 | ||
| 1 | 13 Arbeitstage | 5 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 7.5 | 4 | For High Hardness (Silicone-Based) | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ～ 1 | 1 | ||
| 1 | 13 Arbeitstage | 6 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 4 | For High Hardness (Silicone-Based) | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ～ 1.2 | 2 | ||
| 1 | 13 Arbeitstage | 8 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 12 | 4 | For High Hardness (Silicone-Based) | 8 | 55 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ～ 1.4 | 2 | ||
| 1 | 13 Arbeitstage | 10 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 15 | 4 | For High Hardness (Silicone-Based) | 10 | 65 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ～ 3 | 2 | ||
| 1 | 13 Arbeitstage | 3 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 4 | For High Hardness (Silicone-Based) | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ～ 0.7 | 1 | ||
| 1 | 13 Arbeitstage | 4 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 12 | 4 | For High Hardness (Silicone-Based) | 6 | 50 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ～ 1 | 1 | ||
| 1 | 13 Arbeitstage | 10 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 30 | 4 | For High Hardness (Silicone-Based) | 10 | 80 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ～ 3 | 2 | ||
| 1 | 13 Arbeitstage | 12 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 36 | 4 | For High Hardness (Silicone-Based) | 12 | 85 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ～ 3 | 2 | ||
| 1 | 13 Arbeitstage | 3 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 6 | 4 | For High Hardness (Silicone-Based) | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ～ 0.7 | 1 | ||
| 1 | 13 Arbeitstage | 4 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 8 | 4 | For High Hardness (Silicone-Based) | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ～ 1 | 1 | ||
| 1 | 13 Arbeitstage | 5 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 10 | 4 | For High Hardness (Silicone-Based) | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ～ 1 | 1 | ||
| 1 | 13 Arbeitstage | 6 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 12 | 4 | For High Hardness (Silicone-Based) | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ～ 1.2 | 2 | ||
| 1 | 13 Arbeitstage | 10 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 20 | 4 | For High Hardness (Silicone-Based) | 10 | 65 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ～ 3 | 2 |
Loading...
Spezifikationen
Model Number
SEC-CEM2B / TSC-CEM2B
SEC-CEM4B / TSC-CEM4B (1.5 D Blade Length Type)
| Flute Diameter D | Corner C 0.1 mm Increment Designation | Blade Length ℓ | Overall Length L | Shank Diameter d | Figure |
| 2 | 0.1 ~ 0.5 | 3 | 40 | 4 | 1 |
| 2.5 | 0.1 ~ 0.5 | 3.75 | 40 | 4 | 1 |
| 3 | 0.1 ~ 0.7 | 4.5 | 45 | 6 | 1 |
| 3.5 | 0.1 ~ 0.7 | 5.25 | 45 | 6 | 1 |
| 4 | 0.1 ~ 1.0 | 6 | 45 | 6 | 1 |
| 4.5 | 0.1 ~ 1.0 | 6.75 | 45 | 6 | 1 |
| 5 | 0.1 ~ 1.0 | 7.5 | 45 | 6 | 1 |
| 5.5 | 0.1 ~ 1.0 | 8.25 | 45 | 6 | 1 |
| 6 | 0.1 ~ 1.2 | 9 | 45 | 6 | 2 |
| 8 | 0.1 ~ 1.4 | 12 | 60 | 8 | 2 |
| 10 | 0.1 ~ 3.0 | 15 | 70 | 10 | 2 |
| 12 | 0.1 ~ 3.0 | 18 | 75 | 12 | 2 |
| 16 | 0.1 ~ 3.0 | 24 | 100 | 16 | 2 |
| 20 | 0.1 ~ 3.0 | 30 | 105 | 20 | 2 |
Model Number
SEC-CEM2S / TSC-CEM2S
SEC-CEM4S /TSC-CEM4S (2 D Blade Length Type)
| Flute Diameter D | Corner C 0.1 mm Increment Designation | Blade Length ℓ | Overall Length L | Shank Diameter d | Figure |
| 2 | 0.1 ~ 0.5 | 4 | 40 | 4 | 1 |
| 2.5 | 0.1 ~ 0.5 | 5 | 40 | 4 | 1 |
| 2.8 | 0.1 ~ 0.5 | 5.6 | 40 | 4 | 1 |
| 3 | 0.1 ~ 0.7 | 6 | 45 | 6 | 1 |
| 3.5 | 0.1 ~ 0.7 | 7 | 45 | 6 | 1 |
| 4 | 0.1 ~ 1.0 | 8 | 45 | 6 | 1 |
| 4.5 | 0.1 ~ 1.0 | 9 | 45 | 6 | 1 |
| 5 | 0.1 ~ 1.0 | 10 | 45 | 6 | 1 |
| 5.5 | 0.1 ~ 1.0 | 11 | 45 | 6 | 1 |
| 6 | 0.1 ~ 1.2 | 12 | 45 | 6 | 2 |
| 8 | 0.1 ~ 1.4 | 16 | 55 | 8 | 2 |
| 10 | 0.1 ~ 3.0 | 20 | 65 | 10 | 2 |
| 12 | 0.1 ~ 3.0 | 24 | 75 | 12 | 2 |
| 16 | 0.1 ~ 3.0 | 32 | 100 | 16 | 2 |
| 20 | 0.1 ~ 3.0 | 40 | 105 | 20 | 2 |
Model Number
SEC-CEM2SR / TSC-CEM2SR (2.5 D Blade Length Type)
| Flute Diameter D | Corner C 0.1 mm Increment Designation | Blade Length ℓ | Overall Length L | Shank Diameter d | Figure |
| 3 | 0.1 ~ 0.7 | 7.5 | 45 | 6 | 1 |
| 4 | 0.1 ~ 1.0 | 10 | 50 | 6 | 1 |
| 5 | 0.1 ~ 1.0 | 12.5 | 55 | 6 | 1 |
| 6 | 0.1 ~ 1.2 | 15 | 60 | 6 | 2 |
| 8 | 0.1 ~ 1.4 | 20 | 70 | 8 | 2 |
| 10 | 0.1 ~ 3.0 | 25 | 80 | 10 | 2 |
| 12 | 0.1 ~ 3.0 | 30 | 85 | 12 | 2 |
Model Number
SEC-CEM2R / TSC-CEM2R
SEC-CEM4R / TSC-CEM4R (3D Blade Length Type)
| Flute Diameter D | Corner C 0.1 mm Increment Designation | Blade Length ℓ | Overall Length L | Shank Diameter d | Figure |
| 2 | 0.1 ~ 0.5 | 6 | 45 | 4 | 1 |
| 2.5 | 0.1 ~ 0.5 | 7.5 | 45 | 4 | 1 |
| 2.8 | 0.1 ~ 0.5 | 8.4 | 45 | 4 | 1 |
| 3 | 0.1 ~ 0.7 | 9 | 45 | 6 | 1 |
| 3.5 | 0.1 ~ 0.7 | 10.5 | 45 | 6 | 1 |
| 4 | 0.1 ~ 1.0 | 12 | 50 | 6 | 1 |
| 4.5 | 0.1 ~ 1.0 | 13.5 | 50 | 6 | 1 |
| 5 | 0.1 ~ 1.0 | 15 | 55 | 6 | 1 |
| 5.5 | 0.1 ~ 1.0 | 16.5 | 55 | 6 | 1 |
| 6 | 0.1 ~ 1.2 | 18 | 60 | 6 | 2 |
| 8 | 0.1 ~ 1.4 | 24 | 70 | 8 | 2 |
| 10 | 0.1 ~ 3.0 | 30 | 80 | 10 | 2 |
| 12 | 0.1 ~ 3.0 | 36 | 85 | 12 | 2 |
| 16 | 0.1 ~ 3.0 | 48 | 115 | 16 | 2 |
| 20 | 0.1 ~ 3.0 | 60 | 125 | 20 | 2 |
Model Number
SEC-CEM2RL / TSC-CEM2RL (3.5 D Blade Length Type)
| Flute Diameter D | Corner C 0.1 mm Increment Designation | Blade Length ℓ | Overall Length L | Shank Diameter d | Figure |
| 3 | 0.1 ~ 0.7 | 10.5 | 45 | 6 | 1 |
| 4 | 0.1 ~ 1.0 | 14 | 50 | 6 | 1 |
| 5 | 0.1 ~ 1.0 | 17.5 | 55 | 6 | 1 |
| 6 | 0.1 ~ 1.2 | 21 | 60 | 6 | 2 |
| 8 | 0.1 ~ 1.4 | 28 | 70 | 8 | 2 |
| 10 | 0.1 ~ 3.0 | 35 | 80 | 10 | 2 |
| 12 | 0.1 ~ 3.0 | 42 | 95 | 12 | 2 |
Model Number
SEC-CEM2L / TSC-CEM2L (4 D Blade Length Type)
| Flute Diameter D | Corner C 0.1 mm Increment Designation | Blade Length ℓ | Overall Length L | Shank Diameter d | Figure |
| 3 | 0.1 ~ 0.7 | 12 | 50 | 6 | 1 |
| 4 | 0.1 ~ 1.0 | 16 | 60 | 6 | 1 |
| 5 | 0.1 ~ 1.0 | 20 | 60 | 6 | 1 |
| 6 | 0.1 ~ 1.2 | 24 | 60 | 6 | 2 |
| 8 | 0.1 ~ 1.4 | 32 | 100 | 8 | 2 |
| 10 | 0.1 ~ 3.0 | 40 | 100 | 10 | 2 |
| 12 | 0.1 ~ 3.0 | 48 | 100 | 12 | 2 |
For Cutting Conditions, Refer to >>Click here.
Grundlegende Informationen
| Model | Quadratisch | Geometry | Mit Führung | Torsion Angle (θ) | Standard Helix (30 to 40°) |
|---|---|---|---|---|---|
| Additional Classification | Manufactured Product | Tolerance of OD(mm) | 0 ~ -0.02 |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
Work Material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel ~ HRC55
- Edelstahl
- Gusseisen
- Aluminum Alloy
- Copper Alloy
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Nut
- Inclined Cutting
-
Corner (C)(mm)
-
Ausführung
- SEC-CEM2□
- SEC-CEM4□
- TSC-CEM2□
- TSC-CEM4□
-
Coating
- For High Hardness (Silicone-Based)
- Ohne Beschichtung
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 7 Tage oder weniger
- 9 Tage oder weniger
- 13 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.