- Aus technischen Gründen ist eine Kreditkartenzahlung temporär nicht möglich. Wir bitten etwaige Unannehmlichkeiten zu entschuldigen.
Rechteckstecker（Representative Standard：UL）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit
-
Ausführung C, IP66 Gehäuse für schwenkbaren Hebel
ILME
[Features]
· Environmentally tolerant enclosure.
· Standard type, made of aluminum die casting, with powder coating and stainless steel flexible rotating lever.
· NBR gasket, IP66- Mengenrabatt
ab∗ ： 9.15 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
MIXO modularer Einsatz und Kontakt
ILME
[Features]
· MIXO.
· MIXO modular inserts and contacts.
· Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.
· Supports optical fiber, coaxial, and Dsub9Pin connectors.- Mengenrabatt
ab∗ ： 3.95 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Ausführung CK, IP66, kleines Gehäuse
ILME
Environmentally tolerant, ultra-small type, IP66 enclosure
[Features]
· An environmentally tolerant enclosure.
· Ultra-small type, IP66- Mengenrabatt
ab∗ ： 2.12 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
CX entspricht dem Starkstrom-Multiformateinsatz
ILME
CX, high current-compatible, compound type, 80A/690V, insert
[Features]
・Compound CX compatible with high currents.
▪ 80A/690V.
▪ Insert- Mengenrabatt
ab∗ ： 15.60 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Ausführung T, IP66 Kunststoff-/Isoliergehäuse
ILME
[Features]
· Environmentally tolerant enclosure.
· Lightweight, low-cost resin insulation type, made of anti-electrostatic thermoplastic, with a polyamide resin lever, and IP65 protection rating- Mengenrabatt
ab∗ ： 12.01 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
CD-Crimp-Ausführung für hohe Dichte, 10 A/250 V, Einsatz
ILME
CDD, high density crimped type, 10A / 250V, insert
[Features]
・CDD.
・High density crimped type.
▪ 10A / 250V.
▪ Insert- Mengenrabatt
ab∗ ： 9.12 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Ausführung C, IP66 Gehäuse für schwenkbaren Hebel für CZ-Einsätze
ILME
[Features]
· Environmentally tolerant enclosure.
· Integrated lever type, made of aluminum die casting, with powder coating and stainless steel flexible rotating lever.
· NBR gasket, IP66- Mengenrabatt
ab∗ ： 16.59 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Hirose Electronic
Connector for board-to-cable connection with 3.5mm pitch. Although compact in size, this connector supports 7 maximum amperes, and its inner-lock construction provides a highly reliable connection, ideal for internal power supplies.
[Features]
· Compact type with 3.5mm pitch: A small-size, space-saving power supply connector, with pitch between adjacent contacts set at 3.5 mm, and arranged in a double-row pattern with 5 mm between opposing sides.
· 7A current rating ensured: Despite the compact size of the power supply, 7A current rating is ensured with use of AWG #16 wires (UL/CSA rating is 6A). Box-style header: Twist-resistant due to its box-style construction, enabling complete prevention of insertion errors.
· Equipped with inner-type full lock: An inner-type full lock with a locking section that is not exposed to the outside ensures secure engagement for a high level of safety.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
ab∗ ： 1.21 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
MIL-Norm-konformer Steckverbinder mit 2,54 mm Rastermaß, Serie FRC2
FUJIKURA (DDK)
This 2.5 mm pitch crimped connector, which is for use with flat ribbon cables, is compliant with MIL-DTL-83503 and suitable for a variety of applications.
[Features]
▪ Compliant with MIL-DTL-83503.
·The new wire connecting operation is simple because the crimping system does not require removal of the coating.
▪ UL standard certified product (File No. E72124).
·The dual mechanism used to prevent incorrect mating includes both a polarity key and an incorrect insertion prevention key.
·Lock levers include the normal long lock as well as the short lock, which is suitable for use with low profiles.
·This connector is compatible with discrete wire crimping types in the HU series.
·This connector is also compatible with FRC2 headers and FRC5 socket connectors.Minimum Lieferzeit ： 42 Arbeitstage -
CD-Crimp-Ausführung zur gemeinsamen Nutzung, 10 A/50 bis 250 V, Einsatz
ILME
CD, general purpose crimped type, 10A / 50 - 250 V, Insert
[Features]
・CD general purpose crimped type.
・10A/50 - 250V.
▪ Insert- Mengenrabatt
ab∗ ： 3.67 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 6.02 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
CSH-Werkzeug nicht erforderlich, Federausführung, 16 A/500 V, Einsatz
ILME
CSH, no-tool-required spring type, 16A / 500V insert
[Features]
・CSH.
・No-tool-required spring type.
▪ 16A / 500V.
▪ Insert- Mengenrabatt
ab∗ ： 13.19 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Misumi, Waterproof, E-Model Connector (Crimp Wire Connection)
MISUMI
Misumi Original Environment Resistant Waterproof Connector
- Mengenrabatt
- UL
- IP65
- For Power Supply
- For Signal
- Connection between Boards
- Connection in Boards
- Screw Type
- Insertion
- 2DCAD
- Silver-Plated
- CAD ：
- 2D
ab∗ ： 11.34 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
WEIDMÜLLER
Slim-type internal connector with selectable wiring method (250 V / 22 A, 16 A / Number of pins 10, 16, 32, 48 (+ PE)).
ab∗ ： 8.40 € Minimum Lieferzeit ： 2 Arbeitstage *Stückpreis Standardkonfiguration
-
D-Sub-Haube mit Schnellverriegelung
Provertha
One-touch attachment and detachment of the Dsub connector will be possible. Can be installed freely using 3 connection accessories (locking bolts).
- Mengenrabatt
ab∗ ： 8.18 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Han Waterproof A-Model Connector (Screw Connection)
MISUMI
A Model Connector
- Mengenrabatt
- UL
- CSA
- CE-Compliant
- For Power Supply
- For Signal
- Connection between Boards
- Screw Type
- Insertion
- Silver-Plated
- CAD ：
- 2D
ab∗ ： 11.11 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Han Waterproof D-Model Connector (Crimped Connection)
MISUMI
D Model Connector
- Mengenrabatt
- UL
- CSA
- CE-Compliant
- For Power Supply
- For Signal
- Connection between Boards
- Caulking
- Insertion
- Silver-Plated
- CAD ：
- 2D
ab∗ ： 7.15 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Hirose Electronic
A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
ab∗ ： 1.26 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder mit 2,5 mm Rastermaß – Serie DF1B【1-10,000 Stk. pro Packung】
Hirose Electronic
Connector for board-to-cable and cable-to-cable connections with 2.5-mm pitch. A wide variety of offerings, including choices in PCB mounting orientation, terminal arrangements, and terminal plating.
[Features]
· A new approach to contact pressure welding and crimping: A new type of connector where the contact-pressure-welded terminal is inserted into the casing.
· By combined use of insulation displacement terminals and crimp terminals, wires with different current ratings can coexist within the same case.
· Terminals can be replaced after wires are connected, allowing ease of maintenance.
· Since the insulation displacement area is protected by the housing, a high level of reliability is ensured.
· Insulation displacement can be performed simply by replacing the applicator of a conventional crimp machine, so no expensive insulation displacement machine is required.
· Headers support potting: A header with increased height to support potting of the board for waterproofing (via resin filling) is available.
· A wide variety of offerings: Each of the "board-to-board" and "relay" series offers both single-row and double-row terminal arrangements, as well as tin and gold standard plating.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
ab∗ ： 0.90 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Außengewinde-Steckverbinder mit Pressschweiß-Relais, Serie HIF3BA-*PD
Hirose Electronic
Can be used for cable-to-cable wiring inside machinery. The HIF3B series socket is also compatible with the HIF3A series.
- Mengenrabatt
ab∗ ： 7.15 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
CDA/CDC-Crimp- und Schraubenausführung zur gemeinsamen Nutzung, 16 A/250 V, Einsatz
ILME
CDA/CDC, Common use screw type and crimp type, 16A / 250V, insert
[Features]
・CDA/CDC.
・General-use screw type, crimp type.
▪ 16A / 250V insert- Mengenrabatt
ab∗ ： 15.34 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
CK/CKS-Ausführung für kleine Schrauben und Federn, 10 A/250 V, Einsatz
ILME
CK / CKS Small screw type / spring type, 10A / 250 V, Insert
[Features]
・CK/CKS.
・Small screw type / spring type.
▪ 10A/250 V insert- Mengenrabatt
ab∗ ： 5.60 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Dualer Klemmen-Einsatz CSS-Federausführung, 16 A/500 V
ILME
CSS spring type dual terminal insert 16A / 500V
[Features]
· Insert / spring type dual wire (two wires can be connected to a single lead)- Mengenrabatt
ab∗ ： 35.62 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Ausführung V, IP67 Gehäuse für Hebel mit hoher Haftung
ILME
[Features]
· Environmentally tolerant enclosure.
· High adhesion vertical locking lever type, aluminum die-cast powder coated NBR gasket IP67- Mengenrabatt
ab∗ ： 26.25 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Misumi, Waterproof, E-Model Connector (Screw Wire Connection)
MISUMI
Misumi Original Environment Resistant Waterproof Connector
- Mengenrabatt
- UL
- IP65
- For Power Supply
- For Signal
- Connection between Boards
- Connection in Boards
- Screw Type
- Insertion
- 2DCAD
- Silver-Plated
- CAD ：
- 2D
ab∗ ： 9.51 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Misumi, Waterproof, DD-Model Connector (Crimp Wire Connection)
MISUMI
Misumi Original Environment Resistant Waterproof Connector
- Mengenrabatt
- UL
- IP65
- For Power Supply
- For Signal
- Connection between Boards
- Connection in Boards
- Screw Type
- Insertion
- 2DCAD
- Silver-Plated
- CAD ：
- 2D
ab∗ ： 12.39 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Han Waterproof E-Model Connector (Screw Connection)
MISUMI
E Model Connector
- Mengenrabatt
- UL
- CSA
- CE-Compliant
- For Power Supply
- For Signal
- Connection between Boards
- Screw Type
- Insertion
- Silver-Plated
- CAD ：
- 2D
ab∗ ： 13.97 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Han Waterproof DD-Model Connector (Crimped Connection)
MISUMI
DD Model Connector
- Mengenrabatt
- UL
- CSA
- CE-Compliant
- For Power Supply
- For Signal
- Connection between Boards
- Connection in Boards
- Caulking
- Insertion
- Silver-Plated
- CAD ：
- 2D
ab∗ ： 21.49 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
WEIDMÜLLER
6-pin connectors for choosing connection method (500 V / 24 A / number of pins 6 (+ PE) / screw, spring, crimp, push-in).
ab∗ ： 8.90 € Minimum Lieferzeit ： 2 Arbeitstage *Stückpreis Standardkonfiguration
-
WEIDMÜLLER
Crimp connection type high-density internal connector (500 V / 16 A / Number of pins 10, 18, 32, 46, 64 (+PE)).
ab∗ ： 19.60 € Minimum Lieferzeit ： 2 Arbeitstage *Stückpreis Standardkonfiguration
-
Hirose Electronic
Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
ab∗ ： 1.14 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Hirose Electronic
Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 2 terminal row. Can use for a wide range of equipment.
[Features]
· On-board improved space saving: The terminal pinout has been condensed into a 2-mm dual-row within a 5-mm width.
· Twice the number of signals can be acquired within the same space as a conventional 2-mm single-row connector.
· A wide array of variations: Crimped and pressure weld wiring connections are available in board-to-cable/relay/board-to-board connector types for expanding the scope of circuit board design.
· In addition, you can choose from gold/tin plating as well as versions which support SMT depending on the target application.
· Covers a broad range of compatible wiring: A 2 mm, dual-row compact design covers a range of compatible wiring from #22-30 AWG.
· Pressure welded labor-saving wire connection: By using fully automated pressure welding equipment, wire connections can be performed easily, including complex multi-harnesses (branched wiring connections), reducing the number of man-hours and eliminating manual processes.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
ab∗ ： 1.11 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Hirose Electronic
Connector with lock for board-to-cable connection, with 5-mm pitch. Supports 8 maximum amperes. · Supports potting, and is ideal for connecting internal power supplies in equipment.
[Features]
· Potting is supported: Enables potting up to 9 mm, and is low-profile with a mounting height of 22.5 mm.
· Prevents incorrect insertion: A complete prevention mechanism guards against reverse entry and insertion into opposite poles during the coupling of pin headers and sockets.
· Solder cracking protection: Glass-fiber reinforced resin is utilized for the pin header case, as a measure for protecting against solder cracking caused by thermal contraction.
· Prevents reverse entry into board: Added guide posts on pin headers prevent reverse board entry.
· Full lock mechanism: Equipped with an outer-lock type full-lock mechanism.
· 8 A current rating: Can carry a maximum current of 8 Amperes.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
ab∗ ： 0.53 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Gehäuse mit Abdeckung für Serie HIF3B
Hirose Electronic
This is a MIL standard-compliant ribbon cable connector HIF3B series crimped socket cover case.
- Mengenrabatt
ab∗ ： 4.70 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
MIL-Norm-konformer Flachbandkabel-Steckverbinder – Serie HIF3B
Hirose Electronic
MIL Standard-compliant ribbon cable connector. A wide variety are available and are used broadly in numerous types of devices and equipment.
[Features]
· MIL Standard-compliant: The HIF3B Series was developed as a MIL standard-compliant product, and is used for a broad range of purposes.
· Compatible with the HIF3 Series.
· UL certified product: The HIF3B Series is UL-certified as a connector.
· Mechanism for preventing incorrect insertion: Guiding method (MIL Standard) where guide keys are inserted in the pin header-side to create convex parts, which are fitted with the concave parts of sockets.
· Guiding is achieved via insertion of a polarizing key into the socket hole.
· Guiding achieved by fitting a convex element on the socket-side (HIF3A type) with a slot in the center of the pin-header side.
· Compatible wire AWG #28: Compatible wiring corresponds toAWG #28 flat cabling (7 wires／0.127 mm, diameter of outer covering 0.9±0.1mm)
Some in-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
ab∗ ： 2.06 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Rack- und Platten-Steckverbinder Serie QR/P1
Hirose Electronic
Compact, high-density mounted, rectangular multipole rack/panel plug-in connector QR/P. Compact crimp terminals divided into power supply and signal use.
[Features]
· The terminals have smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
· The terminals are made compact by segregating according to those for power and those for signals.
· The housing internal pinout has pin 12 opposing pin 2 on one side, pins 8, 24 opposing pin 2 on both sides (total: 4 pins), and pin 32 opposing pin 3 on one side (total: 6 pins) with a greater distance of separation from other pins. These terminal pins feature a creepage distance that can adequately withstand high voltages. Therefore, the terminals can be used as power supply terminals.
· Additionally, a flame retardant material (UL9V-0) is used for the insulating material.
· Guide pins are metallic to withstand coupling impact.
· Installation to a panel or rack is achieved via a floating bush. Therefore, insertion and removal do not require the application of excessive force.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
ab∗ ： 3.59 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Rack- und Platten-Steckverbinder, Serie QR/P4
Hirose Electronic
Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design with the insulation and the guide pin incorporated into a single body shape.
[Features]
· The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
· The terminals are made compact by segregating according to those for power and those for signals.
• The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles on both sides (total: 4 poles) are distributed with 5.08-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
• In addition, the insulation is a flame retardant material (UL9V-0).
• The small design features guide pins and insulation joined in a single body shape.
• Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
• The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
• This product has obtained UL, CSA, and TUV certifications.- Mengenrabatt
ab∗ ： 3.46 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Rack- und Platten-Steckverbinder, Serie QR/P6
Hirose Electronic
Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design crimp terminals divided for power supplies and signals with guide pins and insulation in a single body shape.
[Features]
· The terminals have a smooth insertion and removal feel, stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
· The terminals are made compact by segregating according to those for power and those for signals.
• The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles opposite each other on one side are distributed with 6.9-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
• In addition, the insulation is a flame retardant material (UL9V-0).
• The small design features guide pins and insulation joined in a single body shape.
• Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
• The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
• This product has obtained UL, CSA, and TUV certifications.- Mengenrabatt
ab∗ ： 3.26 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Rack- und Platten-Steckverbinder, Serie QR/P8
Hirose Electronic
• Compared to the QR/P4 Series products with the same number of cores, dimensions are decreased by 20% through the use of a rectangular plug-in connection and multipolar rack and panel connector. • A terminal for power supplies with 2 poles on both sides is set up in a reinforced area of the guide pin of the housing.
[Features]
• Compared to conventional QR/P4 Series products with the same number of cores, these models have a small size width approximately 20% narrower.
• By positioning both sides of the 2-pole structure in the reinforced area of the guide pin of the housing, the design uses 5.3-mm pitches for a small size that is also durable enough to withstand high voltage, and can be used for power supplies.
• In addition, terminals for signals are positioned with a 2-mm pitch.
• The terminal for power supplies with 2 poles on both ends features holes that can be used for wire connections with AWG #20 - #24 wires.
• Other terminals for signals have holes that can be used for wire connections with AWG #24 - #28 wires.
· The terminals have stable contact pressure through point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
• The small design features guide pins and insulation joined in a single body shape.
• Mounting to the panel or the rack uses a stepped screw system to fix the product in a floating place, allowing for comfortable insertion and removal operations.
• This product has obtained UL, CSA, and TUV certifications.- Mengenrabatt
ab∗ ： 2.36 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Rack- und Platten-Steckverbinder, Serie QR/P
Hirose Electronic
Plug-in connection rack/panel connector. Connects and disconnects the power supply and signal circuit between the unit and the rack. Crimp terminals have a shared ribbon shape form for both male and female models.
[Features]
· The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
• Through the utilization of a shared form for male and female terminals, wire connections have improved workability and the terminals themselves have some flexibility.
• For each number of pins, the terminal position inside the housing puts some distance between the other terminals at the 2 opposite pins on both sides (4 pins total), and this distance ensure sufficient durability to withstand high voltage, so these products can be used for power supplies.
• In addition, the insulation is a flame retardant material (UL9V-0).
• Guide pins are made of metal for the durability to withstand coupling shocks.
• Products mount to the panel or rack fixed in place through a floating bushing system, allowing for comfortable insertion and removal operations.- Mengenrabatt
ab∗ ： 3.45 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Hirose Electronic
This is a board-to-cable connector for a circuit board with high voltage resistance that corresponds to 3,000 V and has a lock included. One-push connection operation is available for improved mating operability.
[Features]
• Connector mating in just one push: Through the utilization of an inertia lock, mating work can be performed easily and with certainty in just one push.
• This also prevents accidents resulting from partial mating.
• Improved workability through vertical mating: Vertical mating and horizontal cable pulling improve workability in the field. drawer allows improved working in the field.
• Also, the mating surface has a large guiding area to make insert operations easier to perform.
• Designed with high voltage in mind: In addition to the terminal pitch, the design accumulates a large side surface distance, retaining performance in a high voltage environment.
• Header connector uplift prevention: Through solder connections to a total of 4 areas, the header side housing is fixed firmly in place, preventing and uplift from occurring.
• Solder implementation for uplift prevention: As a solder implementation method for preventing uplift, a kink structure is included in the terminals (P = 12 mm products only).
• UL, C-UL, and TUV certified products: Those products have obtained safety standard qualifications as connectors (P = 12 mm products only).- Mengenrabatt
ab∗ ： 1.27 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
MIL-Norm-konformer Steckverbinder mit 2,54 mm Rastermaß, Serie FRC5
FUJIKURA (DDK)
A 2.5-mm pitch pressure-contact connector for flat ribbon cables compliant with MIL-DTL-83503.
[Features]
· The FRC5 Series are 2.54-mm pitch pressure-contact connectors for flat ribbon cables compliant with MIL-DTL-83503. A lower cost price has been achieved by re-structuring and reducing the amount of metal in the contacts.
· The price has also been lowered by metal plating only the contact-contacting parts.
· Compliant with MIL-DTL-83503.
· The wiring task has been simplified due to the crimping that does not require removal of the coating.
· UL standard certified product (File No. E72124).
· The connectors use a polarity key and an insertion-error prevention key to provide a dual insertion-error prevention structure.
· The locking levers come in two types: a regular long lock and a short lock, which is suitable for low-profile connections.
· Compatible with the loose wire crimping HU Series.
· Compatible with FRC5 socket connectors and FRC2 headers.- Mengenrabatt
- CAD ：
- 2D
ab∗ ： 1.65 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder Serie Han A (Schrauben-Verdrahtung)
Harting
This is a compact type in the Han series. Space saving, and screw-type connection does not require special tools (Models are separated using "-" rather than spaces)..
- Mengenrabatt
ab∗ ： 11.11 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder Serie Han Q (Crimp-Verdrahtung)
Harting
This series is even smaller than the Han A series. Saves space, as the connector outer diameter is the same size even if the number of wires increases (Models are separated using "-" rather than spaces).
- Mengenrabatt
ab∗ ： 10.03 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder Serie Han D/DD (Crimp-Verdrahtung)
Harting
Available in a wide range of variations in the number of pins. Ideal power source connector for use in harsh environments. Crimp connection for reliable connection (Models are separated using "-" rather than spaces).
- Mengenrabatt
ab∗ ： 6.84 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| CAD |
| ab∗ |
| Minimum Lieferzeit |
| Spezifikationen |
| Connector Shape |
| A· B· C |
| D· E· F |
| G·H·I |
| J·K·L |
| M·N·O |
| P· Q· R |
| S· T· U |
| V· W· X |
| Number |
| Applicable pin/contact |
| Number Of Cores |
| Application |
| Allowable Current(A) |
| Allowable Voltage(V) |
| Wire connection method |
| Connection direction |
| Protection function (environmentally resistant) |
| Representative Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
| Warenzeichen | ILME | ILME | ILME | ILME | ILME | ILME | ILME | Hirose Electronic | FUJIKURA (DDK) | ILME | ILME | ILME | MISUMI | WEIDMÜLLER | Provertha | MISUMI | MISUMI | Hirose Electronic | Hirose Electronic | Hirose Electronic | ILME | ILME | ILME | ILME | MISUMI | MISUMI | MISUMI | MISUMI | WEIDMÜLLER | WEIDMÜLLER | Hirose Electronic | Hirose Electronic | Hirose Electronic | Hirose Electronic | Hirose Electronic | Hirose Electronic | Hirose Electronic | Hirose Electronic | Hirose Electronic | Hirose Electronic | Hirose Electronic | FUJIKURA (DDK) | Harting | Harting | Harting |
| Artikelserie | Ausführung C, IP66 Gehäuse für schwenkbaren Hebel für CZ-Einsätze | MIL-Norm-konformer Steckverbinder mit 2,54 mm Rastermaß, Serie FRC2 | CD-Crimp-Ausführung zur gemeinsamen Nutzung, 10 A/50 bis 250 V, Einsatz | CSH-Werkzeug nicht erforderlich, Federausführung, 16 A/500 V, Einsatz | Misumi, Waterproof, E-Model Connector (Crimp Wire Connection) | Platine-zu-Kabel-Steckverbinder mit 2,5 mm Rastermaß – Serie DF1B【1-10,000 Stk. pro Packung】 | Außengewinde-Steckverbinder mit Pressschweiß-Relais, Serie HIF3BA-*PD | CDA/CDC-Crimp- und Schraubenausführung zur gemeinsamen Nutzung, 16 A/250 V, Einsatz | CK/CKS-Ausführung für kleine Schrauben und Federn, 10 A/250 V, Einsatz | Misumi, Waterproof, E-Model Connector (Screw Wire Connection) | Misumi, Waterproof, DD-Model Connector (Crimp Wire Connection) | MIL-Norm-konformer Flachbandkabel-Steckverbinder – Serie HIF3B | MIL-Norm-konformer Steckverbinder mit 2,54 mm Rastermaß, Serie FRC5 | ||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||
| ab∗ | 9.15 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.95 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.12 € *Stückpreis Standardkonfiguration Mengenrabatt | 15.60 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.01 € *Stückpreis Standardkonfiguration Mengenrabatt | 9.12 € *Stückpreis Standardkonfiguration Mengenrabatt | 16.59 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.21 € *Stückpreis Standardkonfiguration Mengenrabatt | - | 3.67 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.02 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.19 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.34 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.40 € *Stückpreis Standardkonfiguration | 8.18 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.11 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.15 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.26 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.90 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.15 € *Stückpreis Standardkonfiguration Mengenrabatt | 15.34 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.60 € *Stückpreis Standardkonfiguration Mengenrabatt | 35.62 € *Stückpreis Standardkonfiguration Mengenrabatt | 26.25 € *Stückpreis Standardkonfiguration Mengenrabatt | 9.51 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.39 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.97 € *Stückpreis Standardkonfiguration Mengenrabatt | 21.49 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.90 € *Stückpreis Standardkonfiguration | 19.60 € *Stückpreis Standardkonfiguration | 1.14 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.11 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.53 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.70 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.06 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.59 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.46 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.26 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.36 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.45 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.27 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.65 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.11 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.03 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.84 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 42 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 2 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 2 Arbeitstage | 2 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 4 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 4 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage |
| Spezifikationen |
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
| Connector Shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape |
| A· B· C | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D· E· F | - | - | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | Other | Other | - | - | - | - | - | - | - | - | - | - | - | Other | Other | Other | - | - | - | - | - | - | - | - | Other | - | - | - |
| G·H·I | - | - | - | - | - | - | - | - | - | - | - | - | Heavy duty | Other | - | Heavy duty | Heavy duty | - | - | - | - | - | - | - | Heavy duty | Heavy duty | Heavy duty | Heavy duty | Other | Other | - | - | - | Other | Other | - | - | - | - | - | - | - | Heavy duty | Heavy duty | Heavy duty |
| J·K·L | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| M·N·O | - | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | MIL | - | - | - | - | - | - | - | - | - | - | - | - | - | - | MIL | - | - | - | - | - | Other | - | - | - | - |
| P· Q· R | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | Other | Other | Other | Other | - | - | - | - | - |
| S· T· U | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| V· W· X | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Applicable pin/contact | - | Male (plug) / Female (socket) | - | Male (plug) / Female (socket) | - | Male (plug) / Female (socket) | - | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | - | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | - | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Female (socket) | - | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) |
| Number Of Cores | - | 1 ～ 20 | - | 4 ～ 42 | - | 24 ～ 108 | - | 4 ～ 10 | 10 ～ 60 | 7 ～ 64 | 5 ～ 12 | 6 ～ 48 | 6 ～ 24 | 3 ～ 16 | 9 ～ 50 | 3 ～ 32 | 7 ～ 64 | 2 ～ 15 | 2 ～ 40 | 10 ～ 64 | 10 ～ 32 | 3 ～ 4 | 6 | - | 6 ～ 48 | 24 ～ 72 | 6 ～ 48 | 24 ～ 108 | 6 ～ 24 | 32 ～ 46 | 2 ～ 15 | 4 ～ 32 | 2 ～ 10 | 20 ～ 60 | 6 ～ 64 | 8 ～ 32 | 16 ～ 40 | 24 | 8 ～ 20 | 4 ～ 24 | 2 | 10 ～ 64 | 3 ～ 32 | 5 ～ 12 | 7 ～ 108 |
| Application | - | Cable Connection | - | Cable Connection | Cable Connection | Cable Connection | Cable Connection | Cable Connection / For PCB | Cable Connection / For PCB | Cable Connection | Cable Connection | Cable Connection | Cable Connection | - | - | Cable Connection | Cable Connection | Cable Connection / For PCB / Panel Mount | Cable Connection / For PCB / Panel Mount | Cable Connection | Cable Connection | Cable Connection | Cable Connection | Cable Connection | Cable Connection | Cable Connection | Cable Connection | Cable Connection | - | - | Cable Connection / For PCB / Panel Mount | Cable Connection / For PCB / Panel Mount | Cable Connection | - | Cable Connection / For PCB | Panel Mount | Panel Mount | Panel Mount | Panel Mount | Panel Mount | Cable Connection / For PCB | Cable Connection / For PCB | Cable Connection | Cable Connection | Cable Connection |
| Allowable Current(A) | - | 5 ～ 100 | - | 16 ～ 80 | - | 10 | - | 5 ～ 7 | 1 | 10 | 10 ～ 40 | 16 | 16 | 10 ～ 22 | - | 10 | 10 | 1 ～ 3 | 0.5 ～ 3 | 1 | 16 | 10 | 16 | - | 16 | 10 | 16 | 10 | 16 ～ 24 | 16 | 3 | 0.5 ～ 2 | 7 ～ 8 | - | 1 | 10 | 3 | 10 | 3 | 10 | 1 | 1 | 10 ～ 16 | 10 ～ 16 | 10 |
| Allowable Voltage(V) | - | 50 ～ 1000 | - | 400 ～ 690 | - | 250 | - | 300 ～ AC 300 | 250 VAC | 50 ～ 250 | 400 ～ 690 | 500 | 500 ～ 600 | 250 | - | 250 ～ 600 | 250 ～ 600 | 250 VAC | 250 VAC | 200 VAC | 250 | 250 ～ 400 | 500 | - | 500 ～ 600 | 250 ～ 600 | 500 ～ 600 | 250 ～ 300 | 500 | 500 | 250 VAC | AC100 ～ 250 VAC | AC / DC 500 | - | 200 VAC | AC 250, AC 125 | AC 300, AC 250 | 120 V AC | AC 300, AC 30 | AC 600, AC 250 | AC / DC 3000 | 250 | 9/6/1900 ～ 250 | 230 ～ 600 | 250 ～ 600 |
| Wire connection method | - | Crimp / Fasten With Screws / Other | - | Crimp / Fasten With Screws | - | Crimp | - | Crimp / Other | Pressure Welding | Crimp | Crimp | Other | Crimp | Fasten With Screws | - | Fasten With Screws | Crimp | Crimp / Other | Crimp / Pressure Welding / Other | Pressure Welding | Crimp / Fasten With Screws | Fasten With Screws / Other | Other | - | Fasten With Screws | Crimp | Fasten With Screws | Crimp | Fasten With Screws / Other | Crimp | Crimp / Other | Crimp / Pressure Welding / Other | Crimp | Crimp | Solder / Crimp / Pressure Welding / Other | Crimp | - | - | Crimp | Crimp | Crimp / Other | Pressure Welding | Fasten With Screws | Crimp | Crimp |
| Connection direction | - | Straight | - | Straight | Straight | Straight | - | Straight / Angle | Straight / Angle | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight / Angle | Straight / Angle | Straight | Straight | Straight | Straight | - | Straight | Straight | Straight | Straight | Straight | Straight | Straight / Angle | Straight / Angle | Straight | Straight | Straight / Angle | Straight | Straight | Straight | Straight | Straight | Straight / Angle | Straight / Angle | Straight | Straight | Straight |
| Protection function (environmentally resistant) | Available | - | Available | - | Available | - | Available | - | NA | - | - | - | Available | NA | - | Available | Available | - | - | - | - | Available | - | Available | Available | Available | Available | Available | NA | NA | - | - | - | - | - | - | - | - | - | - | - | NA | Available | Available | Available |
| Representative Standard | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL |
Loading...
Konfigurieren
Stock
-
- Nur Lagerteile anzeigen
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Connector Shape
- Square shape
- Other
-
A· B· C
- Other
-
D· E· F
- Dsub
- FCN
- Other
-
G·H·I
- Heavy duty
- Other
-
J·K·L
- Other
-
M·N·O
- MR
- MIL
- Other
-
P· Q· R
- Other
-
S· T· U
- Other
-
V· W· X
- Other
-
Number
- Other
-
Applicable pin/contact
- Male (plug)
- Female (socket)
- Combination use male/female
-
Number Of Cores
-
Application
-
Allowable Current(A)
-
Allowable Voltage(V)
- 1/24/1900
- 5
- 9/6/1900
- 12 VDC - 230 VAC
- 17.5
- 24
- 24 V AC/DC
- 25
- 50
- AC 50
- 72
- 100
- AC100
- 120 V AC
- AC125
- 150
- AC 150
- 160
- 200 VAC
- 230
- 230/400
- 250
- 250 VAC
- AC 250, AC 125
- AC 250, DC 350
- 300
- AC 300
- AC 300, AC 30
- AC 300, AC 250
- 320
- AC350
- 380
- 400
- AC 400
- 400/400 V (Leistungs-/Steuerungsbereich)
- 400/690
- 400/690 V (Leiter-Erde/Leiter/Leiter)
- 400/690 V(Leiter-Erde/Leiter-Leiter)
- 500
- AC500
- AC / DC 500
- 550
- 600
- AC 600, AC 250
- 630
- 690
- 690/160 V (Leistungs-/Steuerungsbereich)
- 690/160 V (consumption/control range)
- 830
- 830/400 V (Leistungs-/Steuerungsbereich)
- 1000
- AC1000
- 1550
- AC / DC 3000
- 3100
-
Wire connection method
- Solder
- Crimp
- Pressure Welding
- Fasten With Screws
- Other
-
Connection direction
- Straight
- Angle
- Other
-
Protection function (environmentally resistant)
-
Representative Standard
Suchergebnisse durch Herstellerauswahl einschränken
-
- ILME (18)
- Hirose Electronic (15)
- Harting (4)
- WEIDMÜLLER (3)
- FUJIKURA (DDK) (2)
- MOLEX (2)
- Provertha (1)
- Hirschmann (0)
- TE Connectivity (0)
- Finder (0)
- UNIVER (0)
- KEL (0)
- EDAC (0)
- Lumberg (0)
- Belden (0)
- DECA (0)
- Amphenol LTW (0)
- Phoenix Contact (0)
- HellermannTyton (0)
- FUJITSU COMPONENT (0)
- Binder (0)
- SOURIAU (0)
- WAGO (0)
- OMRON (0)
- HONDA TSUSHIN KOGYO (0)
- LAPP (0)
- MH Connectors (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Kategorien beziehen sich auf Rechteckstecker
Bezahlverfahren
MISUMISales area
Copyright © MISUMI Corporation All Rights Reserved.
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.