Rechteckstecker（Application：Plattenmontage）

?* Informationen zur Lieferzeit und Preisen

• 

  Steckverbinder in Löt- / DIP-Ausführung, Serie 57

  FUJIKURA (DDK)

  A 2.159-mm pitch ribbon-type connector for soldering. These are the core of the 57 family of connectors, which are available in 5 types.
  
  [Features]
  ■ This 57 Series forms the core of the 57 family of DIP connectors. The following 5 types are available.
  · 57-10 type (unit connection plug).
  · 57-20 type (unit connection receptacle).
  · 57-30 type (plug with straight hood for cables).
  · 57-40 type (panel receptacle with locking spring).
  · 57-60 type (cable relay receptacle).

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	5.25 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Serie PCR

  HONDA TSUSHIN KOGYO

  Bellows, high-density contact type and accessories are, as with the PCS series, applicable to various uses.
  
  [Features]
  · A wide range of cores of 20 to 96 are available from the board to the cable.
  · For EMI measures other than FCC.
  · A wide range of cores of 20 to 128 are available from board to board.
  · Products enabling live wire connection (three steps) are available.
  · Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
  · Ideal for connection to horizontal, parallel, and vertical backs.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	20.69 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Kabel-Steckverbinder (2 mm Rastermaß, zwei Reihen-Stifte) – Serie DF11【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 2 terminal row. Can use for a wide range of equipment.
  
  [Features]
  · On-board improved space saving: The terminal pinout has been condensed into a 2-mm dual-row within a 5-mm width.
  · Twice the number of signals can be acquired within the same space as a conventional 2-mm single-row connector.
  · A wide array of variations: Crimped and pressure weld wiring connections are available in board-to-cable/relay/board-to-board connector types for expanding the scope of circuit board design.
  · In addition, you can choose from gold/tin plating as well as versions which support SMT depending on the target application.
  · Covers a broad range of compatible wiring: A 2 mm, dual-row compact design covers a range of compatible wiring from #22-30 AWG.
  · Pressure welded labor-saving wire connection: By using fully automated pressure welding equipment, wire connections can be performed easily, including complex multi-harnesses (branched wiring connections), reducing the number of man-hours and eliminating manual processes.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.17 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rack- und Platten-Steckverbinder, klein, Serie QR / P15

  HIROSE ELECTRONIC

  Construction is divided into main connector unit / cable connection portion. 8, 24 (4 pins for power source) and 40-pin configuration.
  
  [Features]
  ・Construction divided into main connector unit / cable connection portion: dividing the main body into main connector unit / cable connection portion parts enables product harness insertion from the back, increasing cable connection harness and set mounting workability.
  ・Sequence structure: the 40-pin type uses 2 pins for both terminals as a sequence terminal, taking safety into full consideration.
  ・Power supply compatibility: The 24-pin type incorporates power source terminal type.
  ・The power supply terminal connection uses MDF6 series 4-pin connectors (3.5-mm pitch, UL and CSA certified). Use of AWG16 ensures a 6A power supply capacity.
  ・Further, it is also possible to crimp using automated machines.
  ・Contact reliability: the main connector body contact portion uses a forked, double contact (tuning fork) shape in an effort to offer more stable contact.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	2.05 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Serie MR

  HONDA TSUSHIN KOGYO

  Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.
  
  [Features]
  · Dual screw and a spring lock mechanism that can withstand any shock.
  · Dust-proof mechanism with excellent environmental resistance.
  · Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
  · A relay type case is also provided

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	1.83 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Gehäuse der Serie MRP

  HONDA TSUSHIN KOGYO

  Housing for the MRP series.
  
  [Features]
  · Dual screw and a spring lock mechanism that can withstand any shock.
  · Dust-proof mechanism with excellent environmental resistance.
  · Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
  · A relay type case is also provided

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	2.10 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder / Diskreter Anschlussdraht, Baureihe DF1E (Raster 2,5 mm)【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.39 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder / Diskreter Drahtsteckverbinder für den Anschluss, Baureihe DF1B (2,5 mm Raster)【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  Connector for board-to-cable and cable-to-cable connections with 2.5-mm pitch. A wide variety of offerings, including choices in PCB mounting orientation, terminal arrangements, and terminal plating.
  
  [Features]
  · A new approach to contact pressure welding and crimping: A new type of connector where the contact-pressure-welded terminal is inserted into the casing.
  · By combined use of insulation displacement terminals and crimp terminals, wires with different current ratings can coexist within the same case.
  · Terminals can be replaced after wires are connected, allowing ease of maintenance.
  · Since the insulation displacement area is protected by the housing, a high level of reliability is ensured.
  · Insulation displacement can be performed simply by replacing the applicator of a conventional crimp machine, so no expensive insulation displacement machine is required.
  · Headers support potting: A header with increased height to support potting of the board for waterproofing (via resin filling) is available.
  · A wide variety of offerings: Each of the "board-to-board" and "relay" series offers both single-row and double-row terminal arrangements, as well as tin and gold standard plating.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.11 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder / Diskreter Drahtverbinder für Anschluss, Baureihe DF3 (Raster 2 mm)【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.09 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  E / A-Steckverbinder mit halbem Rastermaß (Originalausführung) , Serie DX

  HIROSE ELECTRONIC

  I/O Connector with a 1.27-mm pitch (Hirose Electric Original Type). A selection of two types of lock methods and abundant variations for wire connection and implementation methods are available.
  
  

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	7.73 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Rack- und Platten-Steckverbinder Serie QR / P1

  HIROSE ELECTRONIC

  Compact, high-density mounted, rectangular multipole rack/panel plug-in connector QR/P. Compact crimp terminals divided into power supply and signal use.
  
  [Features]
  · The terminals have smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  · The housing internal pinout has pin 12 opposing pin 2 on one side, pins 8, 24 opposing pin 2 on both sides (total: 4 pins), and pin 32 opposing pin 3 on one side (total: 6 pins) with a greater distance of separation from other pins. These terminal pins feature a creepage distance that can adequately withstand high voltages. Therefore, the terminals can be used as power supply terminals.
  · Additionally, a flame retardant material (UL9V-0) is used for the insulating material.
  · Guide pins are metallic to withstand coupling impact.
  · Installation to a panel or rack is achieved via a floating bush. Therefore, insertion and removal do not require the application of excessive force.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	3.15 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rack- und Platten-Steckverbinder, Serie QR / P4

  HIROSE ELECTRONIC

  Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design with the insulation and the guide pin incorporated into a single body shape.
  
  [Features]
  · The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  • The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles on both sides (total: 4 poles) are distributed with 5.08-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
  • In addition, the insulation is a flame retardant material (UL9V-0).
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
  • The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
  • This product has obtained UL, CSA, and TUV certifications.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	2.65 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rack- und Platten-Steckverbinder, Serie QR / P6

  HIROSE ELECTRONIC

  Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design crimp terminals divided for power supplies and signals with guide pins and insulation in a single body shape.
  
  [Features]
  · The terminals have a smooth insertion and removal feel, stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  • The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles opposite each other on one side are distributed with 6.9-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
  • In addition, the insulation is a flame retardant material (UL9V-0).
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
  • The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
  • This product has obtained UL, CSA, and TUV certifications.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	2.40 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rack- und Platten-Steckverbinder, Serie QR / P8

  HIROSE ELECTRONIC

  • Compared to the QR/P4 Series products with the same number of cores, dimensions are decreased by 20% through the use of a rectangular plug-in connection and multipolar rack and panel connector. • A terminal for power supplies with 2 poles on both sides is set up in a reinforced area of the guide pin of the housing.
  
  [Features]
  • Compared to conventional QR/P4 Series products with the same number of cores, these models have a small size width approximately 20% narrower.
  • By positioning both sides of the 2-pole structure in the reinforced area of the guide pin of the housing, the design uses 5.3-mm pitches for a small size that is also durable enough to withstand high voltage, and can be used for power supplies.
  • In addition, terminals for signals are positioned with a 2-mm pitch.
  • The terminal for power supplies with 2 poles on both ends features holes that can be used for wire connections with AWG #20 - #24 wires.
  • Other terminals for signals have holes that can be used for wire connections with AWG #24 - #28 wires.
  · The terminals have stable contact pressure through point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in a floating place, allowing for comfortable insertion and removal operations.
  • This product has obtained UL, CSA, and TUV certifications.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	1.48 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rack- und Platten-Steckverbinder, Serie QR / P

  HIROSE ELECTRONIC

  Plug-in connection rack/panel connector. Connects and disconnects the power supply and signal circuit between the unit and the rack. Crimp terminals have a shared ribbon shape form for both male and female models.
  
  [Features]
  · The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  • Through the utilization of a shared form for male and female terminals, wire connections have improved workability and the terminals themselves have some flexibility.
  • For each number of pins, the terminal position inside the housing puts some distance between the other terminals at the 2 opposite pins on both sides (4 pins total), and this distance ensure sufficient durability to withstand high voltage, so these products can be used for power supplies.
  • In addition, the insulation is a flame retardant material (UL9V-0).
  • Guide pins are made of metal for the durability to withstand coupling shocks.
  • Products mount to the panel or rack fixed in place through a floating bushing system, allowing for comfortable insertion and removal operations.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	2.79 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gerade DIP-Ausführung Serie 17JE

  FUJIKURA (DDK)

  Straight DIP type connector which can be mounted vertically on a PCB.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	5.94 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gelötete Steckverbinder, Serie 17JE

  FUJIKURA (DDK)

  17 Series (Dsub type) soldering connection type square connector for cable equipment.
  [Features]
  · Square connector for solder wire connections, with solder cup type contact.
  · Ni plating is used for the metal shell surface treatment, and the pin connector is bead treated.
  · The hood is metalized plastic, which provides weight reduction and a high shielding effect.
  · Either the pin connector or the socket connector can be selected.
  · There are 4 shell sizes: 9, 15, 25, and 37. The core counts are 9 cores, 15 cores, 25 cores, and 37 cores.
  · The cable and plug wire connection can be shielded with a metalized hood, which is effective as an EMI measure.
  [Applications]
  · Can be used as an interface for equipment and devices. Optimal for use on twisted wire of AWG22 or less.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	4.17 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder L-Ausführung und DIP-Ausführung Serie 17LE

  FUJIKURA (DDK)

  Connects to a circuit via dip soldering to PCB through-holes. The bracket is affixed to a PCB via fastening with screws.
  
  [Features]
  • Comes in 9, 15, 25, or 37 contact models.
  • A base and hex nuts can be installed for securing the coupling to the other side.
  • The surface of the metal shell is nickel-plated and the pin connectors are heat-treated.
  • Different types of grounding fixtures are available for the brackets, delivering even more reliable EMI shielding.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	8.76 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gerade DIP-Flachband-Steckhülse, Serie 57GE.

  FUJIKURA (DDK)

  [Features]
  ・The 57GE series consists of straight DIP-type connectors with fittings covered by a metal shell, which is a countermeasure against electromagnetic radiation that helps to reduce noise.
  ・Type 40 (receptacle for I/F).

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	7.89 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Serie 57RE – Rechtwinkliger Buchsensteckverbinder in Flachband-Ausführung mit niedrigem Gewicht

  FUJIKURA (DDK)

  These connectors have fewer parts than 57LE series connectors and are lighter as well. (The shell and end disk latch are a single unit, as are the insert and locater.)
  
  [Features]
  • The 57RE series connectors have fewer parts than the 57LE series connectors, and are lighter as well.
  
  • Connectors on the other side fit plug connectors belonging to the 57, 57F, 57FE, and 57JE series.
  • UL application filed (File No. E72124).

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	5.49 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  DN-Steckverbinder für kleine, flache Schnittstellen

  HIROSE ELECTRONIC

  This small, multi-pin rectangular connector was developed to support the miniaturization of electronic devices, and thinner devices in particular
  
  [Features]
  · The terminal's wire connector is arrayed in a 2.54 mm grid that makes it easy to design circuits on a printed circuit board.
  · The structure of the terminal is based on the manufacturer's SM series (D-sub connectors). This gives the terminal dependable quality.
  · The single-action lock mechanism provides excellent operability.
  · The cover case is designed to be thin and compact and features a low profile in order to meet the needs of high-density mounting. Mounting with 17.78 mm (700 mils) between circuit boards is possible.
  · The cover case is made of an aluminum die casting offering good electromagnetic shielding characteristics. Combined with the connector's metal shell, the above configuration ensures that noise is reduced.
  · The dip connector includes a snap (circuit board temporary joint) bracket.
  · Pressure Connecting type supports connection of two wire types, AWG 26 and 28, via pressure welding, for use with standard 1.27-mm pitch cables.
  · Crimping type can be used to perform crimping of AWG 26 to 28 wiring.
  · Depending on the application, cable can be extracted in either the vertical or horizontal direction.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	10.44 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...