Rechteckstecker（Wire connection method：Crimp）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Platine-zu-Kabel-Steckverbinder mit 1,25 mm Rastermaß – Serie DF13【1-10,000 Stk. pro Packung】
HIROSE ELECTRONIC
Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.
[Features]
· Small.
· A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)
· Multipole
· The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.
· Supports automatic mounting.
· The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.
· Complete basic functionality despite compact form factor.
· The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.
· Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.
In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.12 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 6.78 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Steckverbinder mit Verriegelung für Interne Stromversorgung, kompatibel mit Verguss mit 5 mm Rastermaß – Serie DF5【100 Stk. pro Packung】
HIROSE ELECTRONIC
Connector with lock for board-to-cable connection, with 5-mm pitch. Supports 8 maximum amperes. · Supports potting, and is ideal for connecting internal power supplies in equipment.
[Features]
· Potting is supported: Enables potting up to 9 mm, and is low-profile with a mounting height of 22.5 mm.
· Prevents incorrect insertion: A complete prevention mechanism guards against reverse entry and insertion into opposite poles during the coupling of pin headers and sockets.
· Solder cracking protection: Glass-fiber reinforced resin is utilized for the pin header case, as a measure for protecting against solder cracking caused by thermal contraction.
· Prevents reverse entry into board: Added guide posts on pin headers prevent reverse board entry.
· Full lock mechanism: Equipped with an outer-lock type full-lock mechanism.
· 8 A current rating: Can carry a maximum current of 8 Amperes.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.25 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder (2 mm Rastermaß, zwei Reihen-Stifte) – Serie DF11【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 2 terminal row. Can use for a wide range of equipment.
[Features]
· On-board improved space saving: The terminal pinout has been condensed into a 2-mm dual-row within a 5-mm width.
· Twice the number of signals can be acquired within the same space as a conventional 2-mm single-row connector.
· A wide array of variations: Crimped and pressure weld wiring connections are available in board-to-cable/relay/board-to-board connector types for expanding the scope of circuit board design.
· In addition, you can choose from gold/tin plating as well as versions which support SMT depending on the target application.
· Covers a broad range of compatible wiring: A 2 mm, dual-row compact design covers a range of compatible wiring from #22-30 AWG.
· Pressure welded labor-saving wire connection: By using fully automated pressure welding equipment, wire connections can be performed easily, including complex multi-harnesses (branched wiring connections), reducing the number of man-hours and eliminating manual processes.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.06 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder (1 mm Rastermaß) , unterstützt Serie LVDS – FX15
HIROSE ELECTRONIC
A shielded connector supporting LVDS transmission. A common board connector that can be selected with a discrete cable, a thin coaxial cable, or a shielded FCC.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 1.20 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
MIXO modularer Einsatz und Kontakt
ILME
[Features]
· MIXO.
· MIXO modular inserts and contacts.
· Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.
· Supports optical fiber, coaxial, and Dsub9Pin connectors.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 3.77 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel- / FPC- / Koaxialkabel (dünn) -Steckverbinder (1 mm Rastermaß) – Serie DF19【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
A thin, 1-mm pitch, board-to-cable/FPC/thin coaxial cable connector. Available in a wide array of variations for circuit boards and cables.
In-stock custom products cannot be returned or canceled. Thank you.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.14 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder / 2-reihiger, mehrpoliger Board-to-Cable-Steckverbinder mit 1 mm Rastermaß, Serie DF20【100 Stk. pro Packung】
HIROSE ELECTRONIC
[Features]
· This is a board-to-cable connector with dual-row, 1-mm pitch terminal pins.
· Contributing to a high-density board mounting.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 12.09 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
D-Sub-Steckverbinder (Crimp-Verdrahtung) – Serie CD【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).
[Features]
· Has a metal shell and so is small and lightweight.
· Connector mounting can be performed on the chassis, front or back, or one of the sides.
· The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.
· The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 2.55 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Baureihe D-Sub, D02, D02-M15
JAPAN AVIATION ELECTRONICS(JAE)
Ein kleiner, leichter und äußerst zuverlässiger Steckverbinder, der alle Arten von elektronischen Geräten kleiner und dichter macht, um erweiterte Funktionen zu unterstützen.
[Eigenschaften]
Der D-Sub-Stecker entwickelt sich mit seiner Kombination aus Stift- und Buchsenstecker zum Standard.
Austauschbar mit verschiedenen Steckertypen und häufig verwendetem Zubehör.
Die Form der Muschelverbindung hat eine Polarität, die ein versehentliches verkehrtes Einstecken vollständig verhindert.
Die DO2-Serie ist ein hochdichter Montagesteckverbinder mit etwa doppelt so vielen Kontakten bei gleicher Gehäusegröße wie der D-Sub.
Das äußere Erscheinungsbild ist kurz und kompakt. Das Kontakt- und Isoliermaterial befindet sich in einer harten Stahlhülle.
Es gibt 5 Schalengrößen (E, A, B, C und D), die mit 9, 15, 25, 37 und 50 Kernen ausgestattet sind. Spezielle Arrays mit Koaxial- und Hochstromkontakten sind ebenfalls erhältlich.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 2.86 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder Serie Han Q (Crimp-Verdrahtung)
HARTING
This series is even smaller than the Han A series. Saves space, as the connector outer diameter is the same size even if the number of wires increases (Models are separated using "-" rather than spaces).- Mengenrabatt
› Jetzt konfigurierenab∗ ： 11.78 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
CNE- / CSE- / CCE-Schraubausführung, Federausführung, Pressverklebungs-Ausführung zur gemeinsamen Nutzung, 16 A / 500 V, Einsatz
ILME
CNE / CSE / CCE, general purpose screw type / spring type / crimped type, 16A / 500V, insert
[Features]
・CNE/CSE/CCE.
・General purpose screw type / spring type / crimped type.
▪ 16A / 500V.
▪ Insert- Mengenrabatt
› Jetzt konfigurierenab∗ ： 10.36 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Misumi, Waterproof, E-Model Connector (Crimp Wire Connection)
MISUMI
[Merkmale] MIAutomatenstahlI's originaler, preiswerter, umweltbeständiger und wasserdichter E-Typ Steckverbinder. Es handelt sich um eine äußerst zuverlässige Crimpverbindung, die die Arbeitszeit verkürzen kann. Vollständig kompatibel mit den Produkten der wichtigsten Steckerhersteller. Bitte überprüfen Sie den Stecker oder die Buchse vor der Bestellung.- Mengenrabatt
- UL
- IP65
- For Power Supply
- For Signal
- Connection between Boards
- Connection in Boards
- Screw Type
- Insertion
- 2DCAD
- Silver-Plated
- 2D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 11.75 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Misumi, Waterproof, DD-Model Connector (Crimp Wire Connection)
MISUMI
[Merkmale] MIAutomatenstahlIs origineller, preiswerter, umweltbeständiger und wasserdichter DD-Steckverbinder. Es handelt sich um eine äußerst zuverlässige Crimpverbindung, die die Arbeitszeit verkürzen kann. Ein Steckverbinder mit hoher Dichte, der in die Hauben und Sockel der Han-E-Serie integriert werden kann. Bitte überprüfen Sie den Stecker oder die Buchse vor der Bestellung.- Mengenrabatt
- UL
- IP65
- For Power Supply
- For Signal
- Connection between Boards
- Connection in Boards
- Screw Type
- Insertion
- 2DCAD
- Silver-Plated
- 2D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 13.12 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Han Waterproof D-Model Connector (Crimped Connection)
MISUMI
D Model Connector- Mengenrabatt
- UL
- CSA
- CE-Compliant
- For Power Supply
- For Signal
- Connection between Boards
- Caulking
- Insertion
- Silver-Plated
- 2D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 24.87 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie HDC HEE
WEIDMÜLLER
Einsatz für Industriesteckverbinder, bestehend aus Kontaktelement und Isolierkörper.› Jetzt konfigurierenab∗ ： 16.97 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie HDC HQ
WEIDMÜLLER
Einsatz für Industriesteckverbinder, bestehend aus Kontaktelement und Isolierkörper.› Jetzt konfigurierenab∗ ： 5.89 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Gehäuse der Serie MRP
HONDA TSUSHIN KOGYO
Housing for the MRP series.
[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided- Mengenrabatt
› Jetzt konfigurierenab∗ ： 2.10 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder (1,25 mm Rastermaß, flache Bauweise) – Serie DF14【100 Stk. pro Packung】
HIROSE ELECTRONIC
Connector for board-to-cable connection with 1.25-mm pitch. A low-profile type with a lower circuit board mounting height.
[Features]
· Thin type.
· A dedicated right-angle connector to achieve a low-profile on top of circuit boards.
· Circuit board mounting height: 2.5 mm.
· This makes it possible to draw signals from places where there is no space between the circuit boards.
· In addition, the profile of the offset type is lower than the board mounting height of 1.6 mm.
· Supports automatic mounting.
· The header has a vacuum absorption surface. Therefore, automatic mounting by embossed packing is possible.
· Additionally, magazine packing is also available for the on-board type.
· Four-walled type prevents socket from scraping the circuit board.
· Header includes a box structure to prevent twisting to ensure incorrect insertion is completely prevented. Circuit board also includes walls to prevent damage caused by scraping when performing insertion and removal from the socket.
· Additionally, a reinforcement bracket is included to prevent solder from peeling.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 12.00 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder mit 2,5 mm Rastermaß, Seitenverriegelung, Serie HNC
HIROSE ELECTRONIC
A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.
[Features]
・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.
・Thin type: mount height when used at a right angle: 4.8 mm.
・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.
・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.
・Further, there are settings available to provide a light feel even if tin plating is used.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.09 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder / Diskreter Anschlussdraht, Baureihe DF1E (Raster 2,5 mm)【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.26 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Steckverbinder / Diskreter Drahtsteckverbinder für den Anschluss, Baureihe DF1B (2,5 mm Raster)【1-10,000 Stk. pro Packung】
HIROSE ELECTRONIC
Connector for board-to-cable and cable-to-cable connections with 2.5-mm pitch. A wide variety of offerings, including choices in PCB mounting orientation, terminal arrangements, and terminal plating.
[Features]
· A new approach to contact pressure welding and crimping: A new type of connector where the contact-pressure-welded terminal is inserted into the casing.
· By combined use of insulation displacement terminals and crimp terminals, wires with different current ratings can coexist within the same case.
· Terminals can be replaced after wires are connected, allowing ease of maintenance.
· Since the insulation displacement area is protected by the housing, a high level of reliability is ensured.
· Insulation displacement can be performed simply by replacing the applicator of a conventional crimp machine, so no expensive insulation displacement machine is required.
· Headers support potting: A header with increased height to support potting of the board for waterproofing (via resin filling) is available.
· A wide variety of offerings: Each of the "board-to-board" and "relay" series offers both single-row and double-row terminal arrangements, as well as tin and gold standard plating.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.02 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-in-Platine-zu-Kabel-Steckverbinder mit 2 mm Rastermaß, Serie DF4
HIROSE ELECTRONIC
Connector for direct board-to-cable connection with 2-mm pitch. By directly attaching the terminal insertion socket into the circuit board, the header cost can be minimized.
[Features]
・Minimizes header cost: using a dual insertion-removal socket and directly attached connector terminal harness, both circuit boards can have their separate functions used as-is, reducing the required number of headers for a dual terminal socket harness from 2 to 1.
・Small type/multi-pin: a wide range of small types with a number of pins.
・Circuit board mounting height: 4.3 mm (1 crimp attachment array), maximum pin number: 32 (2 crimp attachment arrays).
・Temporary circuit board fastening mechanism: Connector can be temporarily affixed to the circuit board in order to make insertion easier.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.04 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder / Diskreter Drahtverbinder für Anschluss, Baureihe DF3 (Raster 2 mm)【100 Stk. pro Packung】
HIROSE ELECTRONIC
Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 2.66 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder Serie DF33 für Interne Stromversorgung mit 3,3-mm-Rastermaß【100 Stk. pro Packung】
HIROSE ELECTRONIC
It is compact and also supports up to 5 A. With its locking mechanism, mis-connection prevention structure, potting compatibility and high reliability, it is optimal for internal power supply connection in equipment.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 8.62 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder für interne Stromversorgung mit 3,5 mm Rastermaß – Serie MDF6【100 Stk. pro Packung】
HIROSE ELECTRONIC
Connector for board-to-cable connection with 3.5mm pitch. Although compact in size, this connector supports 7 maximum amperes, and its inner-lock construction provides a highly reliable connection, ideal for internal power supplies.
[Features]
· Compact type with 3.5mm pitch: A small-size, space-saving power supply connector, with pitch between adjacent contacts set at 3.5 mm, and arranged in a double-row pattern with 5 mm between opposing sides.
· 7A current rating ensured: Despite the compact size of the power supply, 7A current rating is ensured with use of AWG #16 wires (UL/CSA rating is 6A). Box-style header: Twist-resistant due to its box-style construction, enabling complete prevention of insertion errors.
· Equipped with inner-type full lock: An inner-type full lock with a locking section that is not exposed to the outside ensures secure engagement for a high level of safety.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 5.57 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Gehäuse mit Abdeckung für Serie HIF3B
HIROSE ELECTRONIC
This is a MIL standard-compliant ribbon cable connector HIF3B series crimped socket cover case.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 3.45 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
DeviceNet-kompatibler Steckverbinder, Serie HR31
HIROSE ELECTRONIC
These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.
[Features]
· DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)
· Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.
· Snap-lock: The snap-lock feature creates a tactile click when mating.
· Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.
· Designed to allow for removal by ⌀1 mm pin when improperly wired.
· Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 1.10 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Rack- und Platten-Steckverbinder Serie QR / P1【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
Compact, high-density mounted, rectangular multipole rack/panel plug-in connector QR/P. Compact crimp terminals divided into power supply and signal use.
[Features]
· The terminals have smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
· The terminals are made compact by segregating according to those for power and those for signals.
· The housing internal pinout has pin 12 opposing pin 2 on one side, pins 8, 24 opposing pin 2 on both sides (total: 4 pins), and pin 32 opposing pin 3 on one side (total: 6 pins) with a greater distance of separation from other pins. These terminal pins feature a creepage distance that can adequately withstand high voltages. Therefore, the terminals can be used as power supply terminals.
· Additionally, a flame retardant material (UL9V-0) is used for the insulating material.
· Guide pins are metallic to withstand coupling impact.
· Installation to a panel or rack is achieved via a floating bush. Therefore, insertion and removal do not require the application of excessive force.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 3.15 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Rack- und Platten-Steckverbinder, Serie QR / P8
HIROSE ELECTRONIC
• Compared to the QR/P4 Series products with the same number of cores, dimensions are decreased by 20% through the use of a rectangular plug-in connection and multipolar rack and panel connector. • A terminal for power supplies with 2 poles on both sides is set up in a reinforced area of the guide pin of the housing.
[Features]
• Compared to conventional QR/P4 Series products with the same number of cores, these models have a small size width approximately 20% narrower.
• By positioning both sides of the 2-pole structure in the reinforced area of the guide pin of the housing, the design uses 5.3-mm pitches for a small size that is also durable enough to withstand high voltage, and can be used for power supplies.
• In addition, terminals for signals are positioned with a 2-mm pitch.
• The terminal for power supplies with 2 poles on both ends features holes that can be used for wire connections with AWG #20 - #24 wires.
• Other terminals for signals have holes that can be used for wire connections with AWG #24 - #28 wires.
· The terminals have stable contact pressure through point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
• The small design features guide pins and insulation joined in a single body shape.
• Mounting to the panel or the rack uses a stepped screw system to fix the product in a floating place, allowing for comfortable insertion and removal operations.
• This product has obtained UL, CSA, and TUV certifications.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.12 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Rack- und Platten-Steckverbinder, Serie QR / P【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
Plug-in connection rack/panel connector. Connects and disconnects the power supply and signal circuit between the unit and the rack. Crimp terminals have a shared ribbon shape form for both male and female models.
[Features]
· The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
• Through the utilization of a shared form for male and female terminals, wire connections have improved workability and the terminals themselves have some flexibility.
• For each number of pins, the terminal position inside the housing puts some distance between the other terminals at the 2 opposite pins on both sides (4 pins total), and this distance ensure sufficient durability to withstand high voltage, so these products can be used for power supplies.
• In addition, the insulation is a flame retardant material (UL9V-0).
• Guide pins are made of metal for the durability to withstand coupling shocks.
• Products mount to the panel or rack fixed in place through a floating bushing system, allowing for comfortable insertion and removal operations.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.42 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Quadratischer Multi-Stift-Steckverbinder (SUMICON) Serie 1600【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
The SUMICON 1600 series of rectangular multi-pin connectors are built using an original Hirose Electric design. These connectors can be used for a variety of different applications based on the combination of connector unit and case employed.
[Features]
· The same nine versions that are available in the 1300 series are available here, with the numbers of pins equal to 8, 12, 16, 20, 24, 28, 34, 45, or 60.
· Connector units are available in soldering, wrapping, or crimping types.
· Available accessories include C cases, CA cases, CBA cases, ST stoppers, STA stoppers, STB stoppers, and others. Combining connectors with these accessories opens up a wide range of possible applications.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 1.26 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
DN-Steckverbinder für kleine, flache Schnittstellen
HIROSE ELECTRONIC
This small, multi-pin rectangular connector was developed to support the miniaturization of electronic devices, and thinner devices in particular
[Features]
· The terminal's wire connector is arrayed in a 2.54 mm grid that makes it easy to design circuits on a printed circuit board.
· The structure of the terminal is based on the manufacturer's SM series (D-sub connectors). This gives the terminal dependable quality.
· The single-action lock mechanism provides excellent operability.
· The cover case is designed to be thin and compact and features a low profile in order to meet the needs of high-density mounting. Mounting with 17.78 mm (700 mils) between circuit boards is possible.
· The cover case is made of an aluminum die casting offering good electromagnetic shielding characteristics. Combined with the connector's metal shell, the above configuration ensures that noise is reduced.
· The dip connector includes a snap (circuit board temporary joint) bracket.
· Pressure Connecting type supports connection of two wire types, AWG 26 and 28, via pressure welding, for use with standard 1.27-mm pitch cables.
· Crimping type can be used to perform crimping of AWG 26 to 28 wiring.
· Depending on the application, cable can be extracted in either the vertical or horizontal direction.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 3.55 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie Han-Modular: Verschiedene Module【2 Stk. pro Packung】
HARTING
It is possible to save space used by connectors by selecting the modules to suit the operating environment (Models are separated using "-" rather than spaces).- Mengenrabatt
› Jetzt konfigurierenab∗ ： 9.99 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Serieller E / A-Steckverbinder mit 2,00 mm Rastermaß
MOLEX
A Molex 2.0 mm pitch connector for external relay connection.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 7.94 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
CD-Crimp-Ausführung zur gemeinsamen Nutzung, 10 A / 50 bis 250 V, Einsatz
ILME
CD, general purpose crimped type, 10A / 50 - 250 V, Insert
[Features]
・CD general purpose crimped type.
・10A/50 - 250V.
▪ Insert- Mengenrabatt
› Jetzt konfigurierenab∗ ： 3.44 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
CDA / CDC-Crimp- und Schraubenausführung zur gemeinsamen Nutzung, 16 A / 250 V, Einsatz
ILME
CDA/CDC, Common use screw type and crimp type, 16A / 250V, insert
[Features]
・CDA/CDC.
・General-use screw type, crimp type.
▪ 16A / 250V insert- Mengenrabatt
› Jetzt konfigurierenab∗ ： 18.21 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
CD-Crimp-Ausführung für hohe Dichte, 10 A / 250 V, Einsatz
ILME
CDD, high density crimped type, 10A / 250V, insert
[Features]
・CDD.
・High density crimped type.
▪ 10A / 250V.
▪ Insert- Mengenrabatt
› Jetzt konfigurierenab∗ ： 12.96 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
CQE-Crimp-Ausführung zur gemeinsamen Nutzung, 16A / 500 V, Einsatz
ILME
CQE, general purpose crimped type, 16A / 500V, insert
[Features]
・CQ.
・E general purpose crimp type.
▪ 16A / 500V insert- Mengenrabatt
› Jetzt konfigurierenab∗ ： 15.02 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
CX entspricht dem Starkstrom-Multiformateinsatz
ILME
[Merkmale] CX, hochstromtauglicher kombinierter Einsatz, Crimpanschluss. Bitte prüfen Sie vor der Bestellung den Stecker und die Buchse. [Anwendung] Geeignet für den Anschluss von Kabeln.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 18.88 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Einzeldraht-Crimp-Buchse – XG5 (Einzeldraht-Crimp-Buchse)
OMRON
[Features]
・A discrete wire crimped type has been added to the MIL connector series.
・ The XG5N-U socket with lock, which is unique to Omron, can be inserted and removed with one hand and securely locked.
・ Saves up to 24% (approximately) space (compared to XG4A).- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.79 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| CAD |
| ab∗ |
| Minimum Lieferzeit |
| Spezifikationen |
| Connector Shape |
| A· B· C |
| D· E· F |
| G·H·I |
| J·K·L |
| M·N·O |
| P· Q· R |
| S· T· U |
| Number |
| Applicable pin/contact |
| Number Of Cores |
| Application |
| Allowable Current(A) |
| Allowable Voltage(V) |
| Wire connection method |
| Connection direction |
| Protection function (environmentally resistant) |
| Representative Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | HIROSE ELECTRONIC | ILME | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | ILME | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | JAPAN AVIATION ELECTRONICS(JAE) | HARTING | ILME | MISUMI | MISUMI | MISUMI | WEIDMÜLLER | WEIDMÜLLER | HONDA TSUSHIN KOGYO | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HARTING | MOLEX | ILME | ILME | ILME | ILME | ILME | OMRON |
| Artikelserie | Platine-zu-Kabel-Steckverbinder mit 1,25 mm Rastermaß – Serie DF13【1-10,000 Stk. pro Packung】 | Platine-zu-Kabel-Steckverbinder (1 mm Rastermaß) , unterstützt Serie LVDS – FX15 | D-Sub-Steckverbinder (Crimp-Verdrahtung) – Serie CD【1-100 Stk. pro Packung】 | Misumi, Waterproof, E-Model Connector (Crimp Wire Connection) | Misumi, Waterproof, DD-Model Connector (Crimp Wire Connection) | Platine-zu-Kabel-Steckverbinder mit 2,5 mm Rastermaß, Seitenverriegelung, Serie HNC | Steckverbinder / Diskreter Anschlussdraht, Baureihe DF1E (Raster 2,5 mm)【1-100 Stk. pro Packung】 | Platine-in-Platine-zu-Kabel-Steckverbinder mit 2 mm Rastermaß, Serie DF4 | Rack- und Platten-Steckverbinder Serie QR / P1【1-100 Stk. pro Packung】 | Rack- und Platten-Steckverbinder, Serie QR / P【1-100 Stk. pro Packung】 | Quadratischer Multi-Stift-Steckverbinder (SUMICON) Serie 1600【1-100 Stk. pro Packung】 | CD-Crimp-Ausführung zur gemeinsamen Nutzung, 10 A / 50 bis 250 V, Einsatz | CDA / CDC-Crimp- und Schraubenausführung zur gemeinsamen Nutzung, 16 A / 250 V, Einsatz | CQE-Crimp-Ausführung zur gemeinsamen Nutzung, 16A / 500 V, Einsatz | |||||||||||||||||||||||||||
| CAD |
|
|
| ||||||||||||||||||||||||||||||||||||||
| ab∗ | 0.12 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.78 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.25 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.06 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.20 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.77 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.14 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.09 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.55 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.86 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.78 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.36 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.75 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.12 € *Stückpreis Standardkonfiguration Mengenrabatt | 24.87 € *Stückpreis Standardkonfiguration Mengenrabatt | 16.97 € *Stückpreis Standardkonfiguration | 5.89 € *Stückpreis Standardkonfiguration | 2.10 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.00 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.09 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.26 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.02 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.04 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.66 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.62 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.57 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.45 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.10 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.15 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.12 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.42 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.26 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.55 € *Stückpreis Standardkonfiguration Mengenrabatt | 9.99 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.94 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.44 € *Stückpreis Standardkonfiguration Mengenrabatt | 18.21 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.96 € *Stückpreis Standardkonfiguration Mengenrabatt | 15.02 € *Stückpreis Standardkonfiguration Mengenrabatt | 18.88 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.79 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit | Versand am selben Tag | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 4 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage |
| Spezifikationen |
|
|
| ||||||||||||||||||||||||||||||||||||||
| Connector Shape | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch |
| A· B· C | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D· E· F | Sonstige | - | Sonstige | Sonstige | Sonstige | - | Sonstige | Sonstige | Dsub | Dsub / Sonstige | - | - | - | - | - | - | - | - | Sonstige | - | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - |
| G·H·I | - | - | - | - | - | - | - | - | - | - | Für Hochleistungsanwendungen | - | Für Hochleistungsanwendungen | Für Hochleistungsanwendungen | Für Hochleistungsanwendungen | Sonstige | Sonstige | - | - | Sonstige | - | - | - | - | - | - | Sonstige | Sonstige | - | - | - | - | - | Für Hochleistungsanwendungen | - | - | - | - | - | - | - |
| J·K·L | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| M·N·O | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | MR | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| P· Q· R | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | Sonstige | Sonstige | - | - | - | - | - | - | - | - | - | - |
| S· T· U | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - |
| Applicable pin/contact | Buchse | Stecker / Buchse | Buchse | Stecker / Buchse | Stecker | Stecker / Buchse | Buchse | Buchse | Stecker / Buchse | Stecker / Buchse | Stecker / Buchse | Stecker / Buchse | Stecker / Buchse | Stecker / Buchse | Stecker | Stecker / Buchse | Buchse | Stecker / Buchse | Buchse | Buchse | Stecker / Buchse | Stecker / Buchse | Stecker | Stecker / Buchse | Buchse | Buchse | - | Buchse | Stecker / Buchse | Stecker / Buchse | Stecker / Buchse / Kombination aus Stecker/Buchse | Stecker / Buchse | Stecker | - | Stecker / Buchse | Stecker / Buchse | Stecker / Buchse | Stecker / Buchse | Stecker / Buchse | Stecker / Buchse | Buchse |
| Number Of Cores | 2 ～ 40 | 5 ～ 12 | - | 4 ～ 32 | 31 ～ 51 | 1 ～ 25 | 8 ～ 20 | 10 ～ 50 | 9 ～ 37 | 9 ～ 50 | 7 ～ 12 | 6 ～ 48 | 6 ～ 24 | 24 ～ 72 | 25 | 32 ～ 46 | 5 | 8 ～ 50 | 4 ～ 10 | 2 ～ 15 | 2 ～ 15 | - | - | 2 ～ 15 | - | - | 20 ～ 60 | 5 | 12 ～ 32 | 8 ～ 12 | 4 ～ 8 | 12 ～ 16 | 26 | 6 ～ 17 | 6 | 7 ～ 64 | 10 ～ 32 | 38 ～ 108 | 64 ～ 92 | 32 ～ 42 | 10 ～ 64 |
| Application | Kabelanschluss | Kabelanschluss | - | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | - | - | Plattenmontage | Kabelanschluss | Kabelanschluss | Kabelanschluss / Plattenmontage | Kabelanschluss | Für PCB | Kabelanschluss | - | - | - | Kabelanschluss | Plattenmontage / Sonstige | Plattenmontage | Plattenmontage / Sonstige | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss |
| Allowable Current(A) | 1 | 10 ～ 40 | 8 | 0.5 ～ 2 | 0.5 | 4 ～ 200 | 1 | 1 | 3 | - | 10 | 16 | 16 | 10 | 10 | 16 | 16 | 3 | 1 | 3 | 1 ～ 3 | 0.5 ～ 3 | 3 | 3 | 5 | 5 ～ 7 | - | 10 ～ 12 | 3 ～ 13 | 2 ～ 3 | 7 ～ 13 | 3 | 3 | 10 ～ 16 | 1.5 | 10 | 16 | 10 | 16 | 16 ～ 40 | 3 |
| Allowable Voltage(V) | AC 150 | 400 ～ 690 | AC / DC 500 | 250 VAC | AC100 | 50 ～ 1000 | AC100 | AC100 | AC350 | - | 400 ～ 600 | 500 | 500 ～ 600 | 250 ～ 600 | 250 ～ 600 | 500 | 400 | AC 300 | AC 150 | 250 VAC | 250 VAC | 250 VAC | 250 VAC | 250 VAC | 500 | AC 300 | - | AC 250, DC 350 | AC 250, AC 125 | AC 300, AC 30 | AC 600, AC 250 | - | 200 VAC | 160 ～ 500 | 125 | 50 ～ 250 | 250 | 250 | 500 | 400 ～ 690 | 250 VAC |
| Wire connection method | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp |
| Connection direction | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | - | - | Gerade | - | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | - | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | - |
| Protection function (environmentally resistant) | - | - | - | - | - | - | - | - | - | N/A | Verfügbar | - | Verfügbar | Verfügbar | Verfügbar | N/A | N/A | N/A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Representative Standard | - | UL / CUL / CCC / CSA | UL / CUL | UL / CSA | - | UL / CUL / CCC / CSA | - | - | - | - | UL / CSA | UL / CSA | CE / UL | CE / UL | CE / UL / CSA | UL / CSA | - | - | - | - | UL / CUL | UL / CSA | - | UL / CSA | - | UL / CSA | UL | - | UL / TUV / CSA | UL / TUV / CSA | UL / TUV / CSA | - | - | - | - | UL / CCC / CSA | UL / CCC / CSA | UL / CCC / CSA | UL / CSA | UL / CCC / CSA | - |
Loading...
Filtern nach:
Lagerbestand
-
- Nur Lagerteile anzeigen
-
Connector Shape
- Quadratisch
- Sonstige
-
A· B· C
- Sonstige
-
D· E· F
- Dsub
- FCN
- Sonstige
-
G·H·I
- Für Hochleistungsanwendungen
- Sonstige
-
J·K·L
- Sonstige
-
M·N·O
- MR
- MIL
- Sonstige
-
P· Q· R
- Sonstige
-
S· T· U
- Sonstige
-
Number
- Sonstige
-
Applicable pin/contact
- Stecker
- Buchse
- Kombination aus Stecker/Buchse
- Sonstige
-
Number Of Cores
-
Application
-
Allowable Current(A)
-
Allowable Voltage(V)
- 5
- DC 12
- 12 VDC - 230 VAC
- 17.5
- 24
- 25
- 50
- AC 50
- 72
- 100
- AC100
- 120 V AC
- 125
- AC125
- 150
- AC 150
- 160
- 200 VAC
- 230/400
- 250
- 250 VAC
- AC 250, AC 125
- AC 250, DC 350
- 300
- AC300
- AC 300
- AC 300, AC 30
- AC 300, AC 250
- 320
- AC350
- 400
- AC 400
- 400/400 V (Leistungs-/Steuerungsbereich)
- 400/690
- 400/690 V (Leiter-Erde/Leiter/Leiter)
- 400/690 V(Leiter-Erde/Leiter-Leiter)
- 500
- AC500
- AC / DC 500
- 550
- 600
- AC 600, AC 250
- 630
- 690
- 690/160 V (Leistungs-/Steuerungsbereich)
- 830
- 830/400 V (Leistungs-/Steuerungsbereich)
- 1000
- 1550
- AC / DC 3000
- 3100
-
Wire connection method
- Lötmittel
- Crimp
- Pressschweißen
- Befestigung mit Schrauben
- Sonstige
-
Connection direction
- Gerade
- Winkel
- Sonstige
-
Protection function (environmentally resistant)
-
Representative Standard
Marke
-
- HIROSE ELECTRONIC (22)
- ILME (8)
- HARTING (2)
- WEIDMÜLLER (2)
- HONDA TSUSHIN KOGYO (1)
- JAPAN AVIATION ELECTRONICS(JAE) (1)
- MOLEX (1)
- OMRON (1)
- BKL ELECTRONIC (0)
- KEL (0)
- FINDER (0)
- UNIVER (0)
- FISCHER ELEKTRONIK (0)
- PROVERTHA (0)
- FUJITSU COMPONENT (0)
- IFM (0)
- NEUTRIK (0)
- TE CONNECTIVITY (0)
- LUMBERG (0)
- AMPHENOL ICC (0)
- HELLERMANN TYTON (0)
- CONNFLY (0)
- PTR (0)
- DECA (0)
- BINDER (0)
- SOURIAU (0)
- EDAC (0)
- CONEC (0)
- LAPP (0)
- WAGO (0)
- ECON CONNECT (0)
- TRU COMPONENTS (0)
- PHOENIX CONTACT (0)
- HIRSCHMANN (0)
- FUJIKURA (DDK) (0)
- MH CONNECTORS (0)
- ASSMANN WSW (0)
- VOGT VERBINDUNGSTECHNIK (0)
CAD Format
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Rechteckstecker
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.