Nylon-Steckverbinder（Anwendung：Kabelanschluss Seite 2）

?* Informationen zur Lieferzeit und Preisen

• 

  Serie D5000

  TE CONNECTIVITY

  A D-5000 Series connector for use with equipment main power supply lines.
  
  [Features]
  · High-current contact: Utilizes a box-shaped contact concept that has high torsional strength based on the Dynamic Series heritage and track record.
  · By using the same kind of newly developed copper alloy in the D-3000 Series, these connectors have excellent elasticity and conductivity characteristics with reliable receptacles and contacts.
  · The silver-plated type D-5000α Series has also been added to cover even higher current ranges.
  · The contacts can be selected to match the application.
  · Sequential contact: Allows sequential coupling to initially ground charged static electricity prior to contact coupling.
  · The long tab was developed for sequential coupling of tab contacts.
  · By using this long tab in combination with the regular tab contacts, it is possible to construct a sequential connection environment.
  · High current tines (lead): This type of tine (lead) mounts to a circuit board.
  · A newly developed twin lead type.
  · This product secures a large joining area with PCBs. Therefore, this enables a reliable pattern and connector connection.
  · IP20 (finger safety protection): The reverse-mount type D-5300 is recommended for applications with live equipment components.
  · By using a housing that can house the equipment (panel side) receptacles and contacts, the equipment connector satisfies the IP20 standard.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.89 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Serie D1000

  TE CONNECTIVITY

  The D-1000 Series are the smallest connectors within the Dynamic Series range.
  
  [Features]
  [Supports a wide range of wires]
  · This connector offers an extensive range of wiring, and supports 30–18 AWG. The outer diameter of the wire coating is large at ⌀ 2.2 mm (when using the D-1200/D-1500 Series), which can also be used as standard on-board.
  [Crimp tool with interchangeable dies]
  · The die on this standard tool is interchangeable. This a single-handle system gives the die purchase for each range, which makes it possible to reduce lead time and minimize implementation costs.
  [A full Series lineup]
  · The 2.0-mm pitch D-1100 and 2.5-mm pitch D-1200 Series are available for selection depending on the wire sizes and the voltages that are used. The lineup includes a number of electrodes up to a maximum of 40 P.
  · The D-1500 Series lineup features 3.5-mm pitch products that are optimally suited for applications, such as bundling signal wires and branching power supplies.
  · The Series lineup includes different color versions in addition to the previous standard black color.
  · In addition to positively promoting the use of multiple electrodes of the same number, it also contributes to a reducing the amount of time required to assemble connectors.
  · The lineup includes more affordable tin plated products, as part of the terminal plating specifications, in addition to conventional products with standard gold plating.
  · Contact options support an extensive range of uses based on application, quality, and cost considerations.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.40 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Serie D2000

  TE CONNECTIVITY

  The D-2000 Series remains small while satisfying specifications for industrial equipment.
  
  [Features]
  Twist-resistant terminal and housing structure: The box shaped recessed contacts are twist-resistant. The housing slits also prevent diagonal mating. This contributes to increased reliability.
  Effective mating length: By securing a long and effective mating length, the demands of industrial equipment can be met with high reliability.
  Applicable wires: This product can be used with AWG18 wires that are widely used in the industrial equipment sector.
  · Lock filling: A distinct locking sound and vibration are transferred to the worker when mating the connector. This makes it possible to complete work without coupling errors (half-mating) even when working in low-visibility environments.
  · Keying: The keying (slit) in the housing is provided to prevent coupling errors by distinguishing X keys from Y keys. Additional key patterns can be created by using a keying plug.
  · Center locking format: When high-density signal line mountings on circuit boards are required, the footprint on the circuit board can be minimized by mounting narrow-pitch connectors.
  · Drawer type: The drawer type has been developed so that each side of the connector has a floating construction. This is as an application that is aimed toward meet the requirements of blind mate connections. The maximum number of pins for the Series is 50P. Using this connector unit-to-unit blind mate connections are possible.
  · Hybrid type: This type can house the signal lines in the D-2000 contacts and the power line in the D-3000 contacts. The D-2600 Series can bundle the signal and power lines into a single connector. This contributes to the footprint of the circuit board and improve maintainability.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.54 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Dynamisches HTS-Modul

  TE CONNECTIVITY

  [Features]
  · The Dynamic Series of connectors have been developed heavy duty waterproofing applications.
  · All Dynamic Series connectors are mountable from the inside of control panels to the panel exterior.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	1.84 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Mini-Universal-Mate-N-Lok-Steckverbinder

  TE CONNECTIVITY

  Small connector that facilitates high density wiring inside equipment.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.52 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  RITS-Steckverbindersystem【1-36 Stk. pro Packung】

  TE CONNECTIVITY

  A “click” sound can be heard when latching while in the smart lock configuration. A connector that lets you easily make connections simply by pushing up with a general purpose tool.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	1.94 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  CL-Steckverbinder【1-500 Stk. pro Packung】

  JST

  These are connectors that allow branching and short-circuit low resistance connections using simple tools such as pliers.
  
  [Features]
  ・ Insulation displacement connection is possible by simple operation.
  ・There is no need to strip the electrical wire sheathing when connecting.
  ・ No special tool is required. The internal contact (fork-shaped contact) is securely pressed against the electrical wire. The connection can be completed by simply clamping the connector body using pliers, etc.
  ・Superior insulation performance.
  ・Insulating the connecting section is not required.
  ・The pre-installed housing provides highly reliable insulating effectiveness.
  ・Mechanism for temporarily securing electrical wires.
  ・Includes a built-in mechanism for temporarily securing electrical wires to prevent wire-slip or connection errors when connecting wires.
  ・ Workability has been improved.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	1.14 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  EH-Steckverbinder【50-100 Stk. pro Packung】

  JST

  This connector has an ultra-thin design, in response to customers' needs for high-density mounting and increased freedom in circuit design of electronic equipment.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	2.53 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  XA-Steckverbinder (für Relaisverbindungen) 【1-10 Stk. pro Packung】

  JST

  A connector with 2.5-mm pitch and strong lock for combined use with relays and circuit boards.
  
  [Features]
  ・A 2.5-mm pitch relay connector compatible with preexisting XA sockets.
  ・In addition to being compatible with an extremely reliable retainer, this product can also be attached to panels.
  ・ Corresponds to preexisting XA sockets.
  ・Inner type contact lance.
  ・Compatible with Panel Mount.
  · A retainer.
  ・Strong Lock Mechanism.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.23 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Gehäuse Serie CL07【10 Stk. pro Packung】

  SUMIKO TEC

  A 5.8 mm pitch waterproof connector capable of handling large currents (max 10A). Three types of waterproof packing are available, providing waterproofing in a variety of sheath sizes. Waterproof packing required (sold separately). Parts with 3 cores or less (CL07D series) are waterproof; parts with 4 cores or more (CL07A series) are drip-proof.
  
  [Features]
  · A drip-proof connector used in environments where mist or droplets form on wires in refrigerated showcases, water heaters, etc.
  · Stable contacts provide for superior mechanical and electrical performance.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	5.67 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kabel-zu-Kabel-Steckverbindergehäuse mit 2,00 mm Rastermaß (51006)

  MOLEX

  This is a Molex single-row connector for low pin count. (Mating housing: 51005, conforming terminal: 50012)

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.57 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Draht-zu-Draht-Steckergehäuse mit 2,5 mm Rastermaß (51198)

  MOLEX

  [Features]
  • Housing 51103 for Molex fittings; can fit Mini-Locks.
  · Number of leads: 2 to 15 leads.
  • Housing lance.
  • Includes flanges for panel mounting.
  • Panel thickness: 0.8 - 2.0 mm compatible.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.16 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kabel-zu-Kabel-Steckverbindergehäuse mit 2,5 mm Rastermaß (51111)

  MOLEX

  A 2.5 mm pitch wire-to-wire nylon connector.
  [Features]
  · Retainer-compatible types available.
  [Applications]
  · Optimal for consumer devices such as signal, wire-to-board and wire-to-wire types.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.11 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kabel-zu-Kabel-Steckverbindergehäuse mit 2,5 mm Rastermaß (51112)

  MOLEX

  [Features]
  · A Molex wire-to-wire connector.
  Retainer-compatible types are also available (compatible housing: 51111, compatible terminal: 50398).
  Number of pins: 2 to 15.
  With panel-mounting tabs: 51112 ★ ★ 30.
  Without panel-mounting tabs: 51112 ★ ★ 10.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.17 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Auf Platinen montierbares 2,5-mm-Steckverbindergehäuse (51015)

  MOLEX

  [Features]
  · Molex wire mounted directly to the board (compatible with 51035 series housings (Applicable terminal: 50034).
  · Number of leads: 2 to 15 leads.
  • Low-profile type.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.09 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Auf Platinen montierbares 2,5-mm-Steckverbindergehäuse (51035)

  MOLEX

  [Features]
  · Molex wire mounted directly to the board (compatible with 51035 series housings (Applicable terminal: 50097).
  · Number of leads: 2 to 18 leads.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.36 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Auf Platinen montierbare 4,0-mm-Steckverbindergehäuse (51036)

  MOLEX

  [Features]
  · Molex wire mounted directly to the board (compatible with 51035 series housings (Applicable terminal: 50097).
  · Number of leads: 2 to 18 leads.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.12 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Mini-Fit-Relais-Klemmengehäuse mit 4,80 mm Rastermaß (5025, Stecker)

  MOLEX

  A 4.80 mm pitch wire-to-wire nylon connector.
  [Features]
  · Fully protected terminal with insulated housing walls.
  [Applications]
  · Optimal for consumer devices such as power and wire-to-wire types.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.26 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Minifit-Relais-Klemmengehäuse mit 4,80 mm Rastermaß (5025, Buchse)

  MOLEX

  Molex terminals are completely protected by the housing's insulation wall. (Mating housing: 5025Plig, conforming terminal: 5005)

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.17 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  MicroBlade™ Platinengehäuse mit 2,00 mm Rastermaß (51004)

  MOLEX

  A highly-reliable Molex product with a box type terminal and a straight and right angle flexible design. Friction lock type. Terminal (compatible terminal: 50011, mating wafers: 53014/ 53015/ 53025)

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.10 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  MicroClasp® Platine, Klemme, mit 2,0 mm Rastermaß (56134) 【9,000 Stk. pro Packung】

  MOLEX

  A space-saving Molex product that offers easier removal than other similar 2.00 mm (.079") and 2.50 mm (.098") pitch wire-to-circuit board connection systems. Angle type (compatible housings: 51242 / 51353 / 51382)

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	213.57 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  MicroClasp® Platine, Gehäuse, mit 2,0 mm Rastermaß (51242)

  MOLEX

  [Features]
  A space-saving Molex product that offers easier removal than other similar 2.00 mm (.079") and 2.50 mm (.098") pitch wire-to-circuit board connection systems. (Mating wafers: 57763, conforming terminal: 56134, conforming retainer: 55767.)

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.51 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  MicroClasp® Platine, Gehäuse, mit 2,0 mm Rastermaß (51382)

  MOLEX

  [Features]
  A space-saving Molex product that offers easier removal than other similar 2.00 mm (.079") and 2.50 mm (.098") pitch wire-to-circuit board connection systems. (Mating housing: 56134)

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.10 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Micro-Fit3.0™-Steckverbinder (43020)

  MOLEX

  A Molex 3.00 mm pitch connector. Available in a variety of fitting forms and poles, including wire-to-wire, wire-to-circuit board, and board-to-board types. Maximum rated current is 5.0 A, and we also have products compatible with other brands. A housing. (Mating housing: 43025)

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.61 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Micro-Fit 3.0-Steckverbinder (43640)

  MOLEX

  [Features]
  · Molex 3.00 mm pitch connector. Available in a variety of wire-to-wire, wire-to-board and board-to-board coupling configurations and number of pins. Maximum rated current: 5.0 A. Brand name compatible products are also available. (Compatible housing: 43645)

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.79 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Neues Mini-Fit-Steckergehäuse 5559 mit 4,2 mm Rastermaß

  MOLEX

  Nylon connector for wire-to-board and wire-to-wire connections.
  [Features]
  · Molex product.
  · Single-row and dual-row products available.
  · Connector for maximum rated current power of 9 A.
  · Compatible terminal: 5558.
  · Mating receptacle: 5557.
  [Applications]
  · Ideal for wire-to-board and wire-to-wire connections.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.56 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Mini-Fit Sr. Netzanschluss (42816)

  MOLEX

  A Molex 10.00 mm pitch wire-to-board, wire-to-wire connector. Maximum current: 50.0 A (2-circuit, applicable wire size: 8 AWG). (Compatible terminal: 42815, compatible housing: 42818)

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	1.48 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Mini-Fit Sr.™ Netzanschluss (42818)

  MOLEX

  Molex 10.00-mm pitch connector for wire-to-wire and wire-to-circuit board connections. Maximum current with 2 pole devices and appropriate wire size is 50.0 A for 8AWG. (Conforming terminal: 42817 mate housing: 42816).

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	1.15 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Mini-Lock™ Draht-zu-Platinen-Gehäuse mit Rastermaß 2,50 mm (51102)

  MOLEX

  Molex types are available in both straight and right angled types. Wire-to-wire optional parts are also available. This product has a high mating workability on the fitting guide wall. (Compatible terminal: 50351, mating wafers: 53375 / 53426)

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.06 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Mizu-P25™ wasserdichter Miniatur-Steckverbinder (52213)

  MOLEX

  A compact IP67 (international protection class) Molex wire-to-wire connector with a dust and water proof structure. (Compatible Terminal: 50148, Fitting Plug: 52266)

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	1.36 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Mizu-P25™ wasserdichter Miniatur-Steckverbinder (52266)

  MOLEX

  [Features]
  A compact IP67 (international protection class) Molex wire-to-wire connector with a dust and water proof structure. (Compatible terminal: 50147, Mating plug: 52213)

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	1.14 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gehäuse MX150 (19432)

  MOLEX

  Molex Products - Fitting Housing: 19433, Compatible Terminal: 19434.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	6.40 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gehäuse MX150 (19433)

  MOLEX

  [Features]
  Molex Fitting Housing: 19432, Compatible Terminal: 19431

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	11.56 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gehäuse MX150 (33471)

  MOLEX

  Molex compatible housing: 33481, compatible terminal: 33012

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	1.00 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gehäuse MX150 (33481)

  MOLEX

  Molex Products - Fitting Housing: 33471, Compatible Terminal: 33000

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.75 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gehäuse MX150 (33482)

  MOLEX

  Molex compatible housing: 33472, compatible terminals: 33000/33011

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	1.91 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  PanelMate™ Platinengehäuse mit 1,25 mm Rastermaß (51146)

  MOLEX

  A Molex 1.85 mm high, thin, low-profile type product. SMT type mounting with solder tabs. (Compatible terminal: 50641, compatible headers: 53779/53780/55063/55178)

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.64 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  PicoBlade™ Platinengehäuse mit 1,25 mm Rastermaß (51021)

  MOLEX

  A number of wire-to-circuit board and wire-to-wire optional extra Molex products are available. There are variations in the headers of both types: Surface mount type and through-hole type. (Mating plug: 51047)

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.08 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  PicoBlade™ Platinengehäuse mit 1,25 mm Rastermaß (51047)

  MOLEX

  A number of wire-to-circuit board and wire-to-wire optional extra Molex products are available. There are variations in the headers of both types: Surface mount type and through-hole type. (Mating housing: 51021, compatible terminals: 50125/ 50133)

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.08 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Sherlock™ Platinengehäuse mit 2,00 mm Rastermaß (35507)

  MOLEX

  A straight and light angled type single-row Molex connector for wire-to-circuit board connections. A wide lock latch with mating stability and good workability. Angle type (Mating wafers: 35362/ 35363, compatible terminal: 50212)

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.06 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  SL™ modulares Gehäuse (70066)

  MOLEX

  Molex 2.54-mm pitch wire-to-wire and wire-to-board connector, available in a range of options suitable for discrete wires, IDT and FFC cables. 1

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.20 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  SL™ modulares Gehäuse (70107)

  MOLEX

  A Molex 2.54 mm pitch connector for circuit board-to-wire connections. Available for discreet wires and all types of IDT/FFC cables. ②

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.49 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  SPOX™ Gehäuse（5195）

  MOLEX

  The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. (Mating housings: 5272/ 5273/ 5274/ 5096/ 53405/ 5271, compatible terminals: 5194/ 5225)

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.63 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  SPOX™ Gehäuse（5240）

  MOLEX

  The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. (Mating housing: 51191, conforming terminal: 5241)

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.56 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  SPOX™ Gehäuse（5264）

  MOLEX

  [Features]
  The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. (Mating housing: 5267/5268, Compatible terminal: 5263)

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	0.09 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

Loading...