- Aus technischen Gründen ist eine Kreditkartenzahlung temporär nicht möglich. Wir bitten etwaige Unannehmlichkeiten zu entschuldigen.
Schraubwerkzeuge（Screw Types：Meter）
Suche durch Präzisierung der Kategorie der unteren Klasse
Handgewindebohrer
Spiralgewindebohrer
Punktgewindebohrer
Rollgewindebohrer
Gewindebohrer für Rohre
Gewindeschneider
Gewindeschneidwerkzeuge
Matrizen
Windeisen
Bearbeitungs-/Abnehmwerkzeuge
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit
-
- Empfehlung
Modell A Hahnserie, Punkthahn A-POT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
- Mengenrabatt
ab∗ ： 15.94 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
- Empfehlung
Hartmetallspitze für Stahl von extrem hoher Härte UH-CT
YAMAWA MFG
[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.
- Mengenrabatt
ab∗ ： 84.73 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 7.00 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 16.63 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Punkthahn-Serie V-Beschichtung V-POT
OSG
Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping
- Mengenrabatt
ab∗ ： 17.33 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Spiralgewindebohrer-Serie, für Aluminium EX-AL-SFT
OSG
Ideal for tapping blind holes in non-ferrous metals such as aluminum and its alloys and die-casting, etc.
- Mengenrabatt
ab∗ ： 8.59 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
High-Speed Steel Hand Tap【10 Stk. pro Packung】
MISUMI
Limited special price is available for the standard sizes
- Mengenrabatt
ab∗ ： 24.54 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Spiralgewindebohrer, für Edelstahl EX-SUS-SFT
OSG
Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.
- Mengenrabatt
ab∗ ： 8.81 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Planet Fräser-Serie MC – Planet Fräser PNGT
OSG
If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.
ab∗ ： 211.79 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Muttergewindebohrer-Serie Muttergewindebohrer NT
OSG
Mainly used for tapping nuts. The threaded length and extended shank portion are designed for good workability with nuts, allowing continuous machining until the shank portion is completely filled with stacked up nuts.
- Mengenrabatt
ab∗ ： 22.33 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 12.11 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
TiN Coated High-Speed Steel Spiral Tap【1-5 Stk. pro Packung】
MISUMI
The high-precision toothed 1.5P type for blind hole drilling and long shank type that's ideal in the deep threading of workpieces are also available
- Mengenrabatt
ab∗ ： 13.09 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
High-Speed Steel Point Tap【10 Stk. pro Packung】
MISUMI
Limited special price is available for the standard sizes
- Mengenrabatt
ab∗ ： 41.31 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Hahnserie für Wendeplattenschrauben-Punkthahn EX-HL-POT
OSG
Used for thread tapping of female threads by inserting the insert (helical coil) into a through hole
- Mengenrabatt
ab∗ ： 13.95 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision female threading of aluminum and aluminum alloy.
- Mengenrabatt
ab∗ ： 12.15 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 12.51 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Handgewindebohrer-Serie für Druckgießmaschinen EX-DC-HT
OSG
Ideal for aluminum alloy casting, aluminum alloy die casting, zinc alloy die casting, etc.
- Mengenrabatt
ab∗ ： 7.88 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Handgewindebohrer Serie Hartmetall Gewindebohrer OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
ab∗ ： 60.78 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Punkthahn-Serie für allgemeine Verwendung EX-POT
OSG
For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the way
- Mengenrabatt
ab∗ ： 7.45 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Nutlose Entleerungshahnserie VP neue Rollen, kurze Schraube VP-NRTS
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
- Mengenrabatt
ab∗ ： 19.52 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Nutlose Entleerungshahnserie für nichteisenhaltige Legierungen B-NRT
OSG
Suitable for metals such as aluminum, zinc, and copper and non-ferrous alloys of these materials.
- Mengenrabatt
ab∗ ： 9.31 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 13.81 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
H Serie Trockenbearbeitung Spiralgewindebohrer für Aluminiumguss/Aluminiumdruckguss HDASP
YAMAWA MFG
Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Suitable for blind holes in aluminum castings, for both longitudinal and transverse machining.
- Mengenrabatt
ab∗ ： 25.73 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 51.84 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Feste Matrize für D-Metrikschrauben
YAMAWA MFG
[Features]
· It is a solid die with improved runout accuracy. High-speed tool steel (HSS) is used to achieve stable processing.
[Applications]
· Work materials: Iron, light metal.
· For male threading.- Mengenrabatt
ab∗ ： 41.50 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
Threading cutters that enable the high-speed stable processing are available at special prices
- Mengenrabatt
ab∗ ： 86.20 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads
MISUMI
The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.
- Mengenrabatt
ab∗ ： 179.41 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
TS Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
TS coating type of the popular threading cutter
- Mengenrabatt
ab∗ ： 115.08 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Stk. pro Packung】
MISUMI
Supports all work materials from general steel to difficult-to-cut materials
- Mengenrabatt
ab∗ ： 35.13 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
High-Speed Steel Spiral Tap【10 Stk. pro Packung】
MISUMI
Limited special price is available for the standard sizes
- Mengenrabatt
ab∗ ： 47.42 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
TiN Coated High-Speed Steel Point Tap【1-5 Stk. pro Packung】
MISUMI
Limited special price is available for the standard sizes
- Mengenrabatt
ab∗ ： 12.64 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 23.73 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
MT Series High-Speed Steel Spiral Tap
MISUMI
[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.- Mengenrabatt
ab∗ ： 9.01 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
NACHI(FUJIKOSHI)
From general steel to difficult-to-cut materials, this coated tap allows high-speed, high-efficiency threading of blind holes.
[Features]
· A tap that adopts powdered high-speed steel with excellent wear resistance and has a TiN coated surface.
· It has a stable life using high-speed, high-precision threading.
· Special relief prevents over-cutting due to excessive advancement of the tap.
[Applications]
· High-speed, high-efficiency threading of through holes on materials ranging from general steel to difficult-to-cut materials.ab∗ ： 18.44 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 43.56 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Punkthahn-Serie HR-Beschichtung für Ni-Basis ultrahitzebeständige Legierung WHR-NI-POT
OSG
The application of an HR coating with a high melt sticking resistance to nickel-base alloys achieves a long life even on age hardened nickel-base alloys (40 to 45 HRC)
ab∗ ： 21.93 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Spiralgewindebohrer, Allgemeine Nutzung EX-SFT
OSG
Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.
- Mengenrabatt
ab∗ ： 7.97 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Spiralgewindebohrer, Hochgeschwindigkeits-Synchronisierungshahn HS-SFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.
- Mengenrabatt
ab∗ ： 27.40 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Handgewindebohrer V-Beschichtung Pulver HSS (für Stahl mit hoher Härte) V-XPM-HT
OSG
Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 42 to 52 HRC. In order to maximize the properties of the base material, V coating with excellent abrasion resistance has been applied to the surface.
ab∗ ： 26.47 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Handgewindebohrer Serie Hartmetall Gewindebohrer langer Schaft LT-OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
ab∗ ： 88.83 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Handgewindebohrer Serie High-Speed-Gewindebohrer mit Öleinfüllverschluss HS-O-OTT
OSG
Excellent performance for high speed tapping and mass production of cast iron/aluminum alloy castings
ab∗ ： 124.04 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Nutlose Entleerungshahnserie X Performer S-XPF
OSG
There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.- Mengenrabatt
ab∗ ： 19.66 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Runde Matrize für Messgerät Schraube
TRUSCO NAKAYAMA
[Features]
· Dimensional adjustments can be made with the adjustment screw provided.
· This can also be used to modify screw threads.
· For 25 mm diameter round die.
[Applications]
· Work materials: Iron, light metal.
· For male threading.
· Correction of coarse screw threads.ab∗ ： 25.21 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 15.80 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 7.22 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||
| Warenzeichen | OSG | YAMAWA MFG | OSG | SKC | OSG | OSG | MISUMI | OSG | OSG | OSG | SKC | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | SKC | YAMAWA MFG | LIGHTSEIKI | YAMAWA MFG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | TRUSCO NAKAYAMA | ISHIHASHI | SKC |
| Artikelserie | TiN Coated High-Speed Steel Spiral Tap【1-5 Stk. pro Packung】 | Nutlose Entleerungshahnserie VP neue Rollen, kurze Schraube VP-NRTS | Nutlose Entleerungshahnserie für nichteisenhaltige Legierungen B-NRT | H Serie Trockenbearbeitung Spiralgewindebohrer für Aluminiumguss/Aluminiumdruckguss HDASP | TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads | TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads | TS Coated Carbide Threading Cutter, for Internal Metric Threads | Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Stk. pro Packung】 | Punkthahn-Serie HR-Beschichtung für Ni-Basis ultrahitzebeständige Legierung WHR-NI-POT | Spiralgewindebohrer, Hochgeschwindigkeits-Synchronisierungshahn HS-SFT | Handgewindebohrer V-Beschichtung Pulver HSS (für Stahl mit hoher Härte) V-XPM-HT | Handgewindebohrer Serie Hartmetall Gewindebohrer langer Schaft LT-OTT | Handgewindebohrer Serie High-Speed-Gewindebohrer mit Öleinfüllverschluss HS-O-OTT | ||||||||||||||||||||||||||||||||
| ab∗ | 15.94 € *Stückpreis Standardkonfiguration Mengenrabatt | 84.73 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.00 € *Stückpreis Standardkonfiguration Mengenrabatt | 16.63 € *Stückpreis Standardkonfiguration | 17.33 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.59 € *Stückpreis Standardkonfiguration Mengenrabatt | 24.54 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.81 € *Stückpreis Standardkonfiguration Mengenrabatt | 211.79 € *Stückpreis Standardkonfiguration | 22.33 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.11 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.09 € *Stückpreis Standardkonfiguration Mengenrabatt | 41.31 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.95 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.15 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.51 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.88 € *Stückpreis Standardkonfiguration Mengenrabatt | 60.78 € *Stückpreis Standardkonfiguration | 7.45 € *Stückpreis Standardkonfiguration Mengenrabatt | 19.52 € *Stückpreis Standardkonfiguration Mengenrabatt | 9.31 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.81 € *Stückpreis Standardkonfiguration | 25.73 € *Stückpreis Standardkonfiguration Mengenrabatt | 51.84 € *Stückpreis Standardkonfiguration | 41.50 € *Stückpreis Standardkonfiguration Mengenrabatt | 86.20 € *Stückpreis Standardkonfiguration Mengenrabatt | 179.41 € *Stückpreis Standardkonfiguration Mengenrabatt | 115.08 € *Stückpreis Standardkonfiguration Mengenrabatt | 35.13 € *Stückpreis Standardkonfiguration Mengenrabatt | 47.42 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.64 € *Stückpreis Standardkonfiguration Mengenrabatt | 23.73 € *Stückpreis Standardkonfiguration Mengenrabatt | 9.01 € *Stückpreis Standardkonfiguration Mengenrabatt | 18.44 € *Stückpreis Standardkonfiguration | 43.56 € *Stückpreis Standardkonfiguration | 21.93 € *Stückpreis Standardkonfiguration | 7.97 € *Stückpreis Standardkonfiguration Mengenrabatt | 27.40 € *Stückpreis Standardkonfiguration Mengenrabatt | 26.47 € *Stückpreis Standardkonfiguration | 88.83 € *Stückpreis Standardkonfiguration | 124.04 € *Stückpreis Standardkonfiguration | 19.66 € *Stückpreis Standardkonfiguration Mengenrabatt | 25.21 € *Stückpreis Standardkonfiguration | 15.80 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.22 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 5 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 3 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | Versand am selben Tag | 3 Arbeitstage | 3 Arbeitstage | 4 Arbeitstage | 7 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 5 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 3 Arbeitstage | 5 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | Versand am selben Tag | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 3 Arbeitstage | 4 Arbeitstage |
| Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| Screw size (Nominal) | M1.4 ～ M24 | M2 ～ M12 | M1 ～ M100 | M6 ～ M33 | M3 ～ M24 | M2 ～ M12 | M3 ～ M10 | M2 ～ M42 | - | M2 ～ M39 | M2.6 ～ M12 | M3 ～ M10 | M2 ～ M12 | M3 ～ M12 | M2 ～ M6 | M3 ～ M12 | M1.4 ～ M20 | M1.4 ～ M24 | M1 ～ M48 | M1 ～ M2.6 | M1 ～ M20 | M3 ～ M48 | M6 ～ M20 | M4 ～ M14 | M1 ～ M30 | M3 ～ M20 | M2 ～ M12 | M3 ～ M12 | M2 ～ M12 | M2 ～ M12 | M3 ～ M10 | M3 ～ M10 | M2 ～ M24 | M2.6 ～ M24 | M3 ～ M12 | M3 ～ M12 | M1 ～ M56 | M3 ～ M14 | M3 ～ M12 | M3 ～ M24 | M6 ～ M12 | M1 ～ M45 | M2 ～ M16 | M3 ～ M24 | M2 ～ M120 |
| Pitch (P), Number of Threading(mm) | 0.25 ～ 3 | 0.4 ～ 1.75 | 0.25 ～ 6 | 0.75 ～ 2 | 0.5 ～ 3 | 0.4 ～ 1.75 | 0.5 ～ 1.5 | 0.4 ～ 4.5 | 1 ～ 3.5 | 0.4 ～ 4 | 0.45 ～ 1.75 | 0.5 ～ 1.5 | 0.4 ～ 1.75 | 0.5 ～ 1.75 | 0.4 ～ 1 | 0.5 ～ 1.75 | 0.3 ～ 2.5 | 0.3 ～ 3 | 0.25 ～ 5 | 0.25 ～ 0.45 | 0.25 ～ 2.5 | 0.5 ～ 5 | 1 ～ 1.75 | 0.7 ～ 2 | 0.25 ～ 3.5 | 0.5 ～ 2.5 | 0.4 ～ 1.75 | 0.5 ～ 1.75 | 0.4 ～ 1.75 | 0.4 ～ 1.75 | 0.5 ～ 1.5 | 0.5 ～ 1.5 | 0.4 ～ 3 | 0.45 ～ 3 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 0.25 ～ 5.5 | 0.5 ～ 2 | 0.5 ～ 1.75 | 0.5 ～ 3 | 1 ～ 1.75 | 0.2 ～ 4.5 | 0.4 ～ 2 | 0.5 ～ 3 | 0.25 ～ 4 |
| Chamfer threads (Lcf) | 5P | 5P | 1.5P ～ 9P | - | 5P | 2.5P | 1.5 P ～ 9 P | 2.5P ～ 3P | - | - | 5P | 1.5 P ～ 2.5 P | 5 P | 5P | 3P | 1.5P ～ 5P | 1.5P ～ 3P | 1.5P ～ 3P | 5P | 2P | 2P ～ 4P | - | 2.5P | - | - | - | - | - | 2.5 P | 2.5 P | 5 P | 1.5 P ～ 3 P | 2.5 P | 2.5P | 2.5P | 5P | 2.5P ～ 3P | 3P | 2.5P ～ 5P | 1.5P ～ 3P | 2P ～ 5P | 2P ～ 4P | - | - | 1.5P ～ 9P |
| Tool Material Type | Powder high-speed steel | Carbide | High-speed steel | - | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Cobalt HSS | High-speed steel | - | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | Powder high-speed steel | High-speed steel | - | Cobalt HSS | - | High-speed steel | Carbide | Carbide | Carbide | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Cobalt HSS | Alloy HSS | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Carbide | Vanadium High-Speed Steel | Powder high-speed steel / Vanadium High-Speed Steel | Alloy HSS | High-speed steel | - |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | High Hardness Steel (50-60 HRC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] | Nickel-based alloy (Inconel, etc.)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Quenched and tempered steel (45 to 55 HRC)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] |
| Tap Type | Point tap | Point tap | Hand Tap | Point tap | Point tap | Spiral Tap | Hand Tap | Spiral Tap | Thread cutter | Thread-cutting-related tool | Hand Tap | Spiral Tap | Point tap | Point tap | Spiral Tap | Hand Tap | Hand Tap | Hand Tap | Point tap | Roll tap | Roll tap | Spiral Tap | Spiral Tap | Modification/removal Tool | Die | Thread cutter | Thread cutter | Thread cutter | Spiral Tap | Spiral Tap | Point tap | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Point tap | Spiral Tap | Spiral Tap | Hand Tap | Hand Tap | Hand Tap | Roll tap | Die | Spiral Tap | Hand Tap |
| Hole type | For through hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | - | - | For blind hole | For through hole | For through hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For blind hole | For blind hole | - | For through hole / For blind hole | - | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole | For through hole / For blind hole | For blind hole | For blind hole | - | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | - | - |
| Coating Y/N | Available | Available | NA | - | Available | NA | NA | NA | Available | NA | - | Available | NA | NA | NA | NA | Available | NA | NA | Available | Available | - | Available | - | NA | Available | Available | Available | NA | NA | Available | NA | NA | Available | NA | Available | NA | Available | Available | NA | Available | Available | - | Available / NA | - |
| Coating Type | Other | TiAlN | Non-Coated | - | TiCN | Non-Coated | - | Non-Coated | TiN | Non-Coated | - | TiN | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiCN | TiN | - | TiCN | - | - | TiAlN | TiAlN | For High Hardness (Silicon Group) | - | - | TiN | - | Non-Coated | TiN | TiCN | Other | Non-Coated | TiN | TiCN | Non-Coated | TiAlN | TiCN | - | TiN / Non-Coated | - |
| Overall Length (L)(mm) | 34 ～ 120 | 40 ～ 82 | 30 ～ 250 | - | 46 ～ 120 | 40 ～ 82 | 46 ～ 75 | 40 ～ 175 | 90 ～ 210 | 80 ～ 340 | - | 46 ～ 150 | 40 ～ 82 | 48 ～ 90 | 40 ～ 62 | 100 ～ 200 | 34 ～ 105 | 34 ～ 120 | 30 ～ 185 | 30 ～ 44 | 30 ～ 105 | - | 62 ～ 105 | - | - | 57 ～ 115 | 58 ～ 73 | 48 ～ 74 | 40 ～ 82 | 40 ～ 82 | 46 ～ 150 | 46 ～ 75 | 40 ～ 120 | 44 ～ 120 | 57 ～ 111 | 46 ～ 82 | 30 ～ 205 | 46 ～ 88 | 46 ～ 82 | 100 ～ 150 | 100 | 30 ～ 220 | - | 46 ～ 120 | - |
Loading...
Konfigurieren
Stock
-
- Nur Lagerteile anzeigen
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTC-51
- CTG-42
- CTC-39
- CTG-36
- CTC-31
- CTG-28
- CTC-25
- CTG-22
- CTC-19
- CTG-16
- CTC-15
- No0UN
- No.0-80UNF
- NO.10
- No.10
- S0.1
- No.1-72UNF
- No.10-32UNF
- No.10-24UNC
- S0.2
- No.2-56UNC
- S0.3
- NO.4
- No.4
- S0.4
- No.4-40UNC
- S0.5
- No.5-40UNC
- No.6
- S0.6
- No.6-32UNC
- S0.7
- No.8
- S0.8
- No.8-32UNC
- S0.9
- 1
- 1UN
- 1UNS
- BC1
- G1
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PS1
- PT1
- R1
- Rc1
- Rp1
- S1
- W1
- 1´-12UNF
- 1´-11.5
- 1´-11
- 1′-11
- 1-8UNC
- 1´-8UNC
- 1"1/2U
- 1"1/2UN
- BSF1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- PS1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11.5
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4U
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PS1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11.5
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8U
- 1"1/8UN
- G1"1/8
- NPS1"1/8
- NPT1"1/8
- PS1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1"1/16U
- 1"1/16UN
- 1/2
- 1/2PF
- 1/2UN
- 1/2UNJ
- 1/2W
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF1/2
- PS1/2
- R1/2
- Rc1/2
- Rp1/2
- SM1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1"3/4U
- 1"3/4UN
- BSF1"3/4
- G1"3/4
- NPS1"3/4
- NPT1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1 3/4-8UN
- 1"3/8U
- 1"3/8UN
- BSF1"3/8
- G1"3/8
- PS1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1"3/16U
- 1"3/16UN
- 1/4
- 1/4UN
- 1/4UNJ
- 1/4W
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PS1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4-18
- 1/4W20
- 1"5/8U
- 1"5/8UN
- BSF1"5/8
- W1"5/8
- 1 5/8-8UN
- 1"5/16U
- 1"5/16UN
- M1～6
- 1"7/8UN
- BSF1"7/8
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- 1/8PT
- 1/8UN
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PS1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8-27
- 1/8-18
- 1/8SM44
- M1～10
- 1´11.5
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- W1/16
- 1/16-28
- 1/16-27
- M1.1
- M1.2
- S1.2
- BC1.37
- M1.4
- S1.4
- M1.5
- M1.6
- M1.7
- M1.8
- 2U
- 2UN
- BSF2
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- W2
- W/2
- 2´-11.5
- 2´-11
- 2′-11
- 2-8UN
- 2"1/2UN
- G2"1/2
- NPS2"1/2
- NPT2"1/2
- R2"1/2
- Rp2"1/2
- W2"1/2
- 2"1/4UN
- BSF2"1/4
- NPS2"1/4
- NPT2"1/4
- R2"1/4
- W2"1/4
- W2"1/8
- 2"3/4UN
- R2"3/4
- W2"3/4
- W2"3/8
- M2～4.5
- W2"7/8
- M2～8
- M2～10
- M2.2
- M2.3
- M2.5
- M2.6
- 3UN
- G3
- M3
- M3.0
- NPS3
- NPT3
- No3UN
- R3
- Rp3
- W3
- 3"1/2UN
- G3"1/2
- NPS3"1/2
- NPT3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF3/4
- PS3/4
- R3/4
- Rc3/4
- Rp3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- M3～5
- M3～6
- 3/8
- 3/8-UNJ
- 3/8UN
- 3/8UNJ
- 3/8W
- BC3/8
- G3/8
- M3~8
- M3～8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PS3/8
- PT3/8
- R3/8
- Rc3/8
- Rp3/8
- SM3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- PT3/8-19
- 3/8-18
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3～12
- 3/16UN
- SM3/16
- W3/16
- 3/16W24
- SM3/32
- W3/32
- M3.5
- 4M
- 4UN
- G4
- M4
- M4.0
- NPS4
- NPT4
- No4UN
- R4
- Rp4
- №4-40UNC
- W4"1/2
- M4～6
- M4～10
- M4～13
- M4～14
- M4.5
- CTV5
- M5
- M5.0
- No5UN
- TV5
- №5-40UNC
- 5/8UN
- G5/8
- NPS5/8
- NPT5/8
- PS5/8
- R5/8
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- 5/8W11
- M5～10
- M5 - M12
- M5～12
- M5～13
- 5/16
- 5/16UN
- 5/16UNJ
- 5/16W
- BC5/16
- SM5/16
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- 5/32UN
- W5/32
- M5.5
- 6UN
- M6
- M6.0
- No6UN
- No6UNJ
- W6
- №6-32UNC
- M6～20
- M6.5
- W6.8
- M7
- PG7
- W7
- 7/8UN
- G7/8
- NPS7/8
- NPT7/8
- PS7/8
- R7/8
- W7/8
- W"7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- 7/16UNJ
- SM7/16
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/32UN
- SM7/32
- W7/32
- M7.5
- 8UN
- CTV8
- M8
- M8.0
- No8UN
- No8UNJ
- TV8
- W8
- №8-32UNC
- M8~12
- M8.5
- M9
- PG9
- 9/16UN
- BC9/16
- UNF9/16
- W9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- W9.5
- W9.8
- 10UN
- M10
- M10.0
- No10UN
- No10UNJ
- TM10
- TR10
- TV10
- TW10
- W10
- №10-32UNF
- №10-24UNC
- M10～13
- M10～25
- M10～30
- M11
- PG11
- W11
- W11/16
- SM11/32
- SM11/64
- 11/64SM40
- M12
- M12.0
- M]12
- No12UN
- TM12
- TW12
- W12
- W12.5
- M13
- W13
- W13/16
- PG13.5
- W13.5
- W13.8
- M14
- M14.0
- TM14
- TW14
- W14
- M15
- W15
- W15/16
- SM15/64
- M16
- M16.0
- PG16
- TM16
- TR16
- TW16
- W16
- M17
- W17
- M18
- M18.0
- TM18
- TW18
- W18
- M19
- W19
- M19～32
- M19～33
- M19～38
- M19～42
- M20
- M20.0
- TM20
- TR20
- TW20
- W20
- W20.32
- M21
- PG21
- W21
- M22
- M22.0
- TM22
- TW22
- W22
- M23
- W23
- M24
- M24.0
- TM24
- TW24
- W24
- M25
- TM25
- TW25
- W25
- M25～50
- M25～60
- M25～70
- M25～72
- M26
- TM26
- TW26
- W26
- M27
- W27
- M28
- TM28
- TW28
- W28
- M29
- PG29
- W29
- M30
- TM30
- TW30
- W30
- M32
- TM32
- W32
- M33
- W33
- M34
- W34
- M35
- W35
- M36
- PG36
- TM36
- W36
- M37
- M38
- W38
- M39
- W39
- M40
- TM40
- W40
- M42
- PG42
- W42
- M42～120
- M43
- M44
- W44
- M45
- W45
- M46
- M48
- W48
- M50
- W50
- M52
- W52
- M54
- W54
- M55
- W55
- M56
- W56
- M58
- M60
- W60
- M62
- W62
- M64
- M65
- W65
- M68
- M70
- W70
- M72
- M75
- W75
- M76
- M78
- M80
- M82
- M85
- M90
- M95
- M100
- M110
- M115
- M120
- 06510X28R
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N150M
- 080153X19G
- 080153X19R
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.34
- 0.35
- 0.4
- 0.45
- 0.5
- 0.529
- 0.6
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.794
- 0.8
- 0.9
- 0.907
- 0.974
- 1
- 1.058
- 1.25
- 1.27
- 1.5
- 1.75
- 2
- 2.5
- 3
- 3 1/2
- 3.5
- 4
- 4 1/2
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 10、11、12、14、16、18、20、24F
- 11
- 11 1/2
- 11.5
- 12
- 13
- 14
- 16
- 18
- 19
- 20
- 24
- 26
- 27
- 28
- 30
- 32
- 36
- 40
- 44
- 48
- 56
- 60
- 64
- 72
- 80
-
Chamfer threads (Lcf)
-
Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- SKS
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Suchergebnisse durch Herstellerauswahl einschränken
-
- OSG (158)
- YAMAWA MFG (87)
- NACHI(FUJIKOSHI) (24)
- SKC (23)
- ISHIHASHI (21)
- TRUSCO NAKAYAMA (10)
- GUHRING (8)
- SANDVIK (8)
- TANOI MFG (6)
- HOZAN (4)
- NOGAJAPAN (3)
- RUKO (2)
- LIGHTSEIKI (1)
- ENGINEER (0)
- KANETEC (0)
- KO-KEN TOOL (0)
- MIERASEN (0)
- NEW STRONG (0)
- NIIGATA SEIKI (0)
- TSUBOSAN (0)
- SMATO (0)
- SK 11 (0)
- NS TOOL (0)
- EIKOSHA (0)
- RENNSTEIG (0)
- DOY FURNITURE (0)
- H & H (0)
- KUKKO (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Kategorien beziehen sich auf Schraubwerkzeuge
-
- Hartmetall-Schaftfräser
- HSS-Fräser
- Schaftfräsen-Wendeschneidplatte/Halter
- Schaftfräser mit individueller gerader Schneide
- Spezialfräsen
- Drehwerkzeuge
- Bohreinsätze
- Schraubwerkzeuge
- Räumwerkzeuge
- Fas-/Zentrierwerkzeuge
- Schneidwerkzeuge und Zubehör
- Stufenbohrer
- Lochsägen
- Schlüsselschneider
- Kernbohrer (Spitze)
- Magnetbohrmaschinen-Schneider
- Bohrspitzen für Elektrobohrer
- Schneidwerkzeuge für Holzbohrer
- Betonbohrer
Bezahlverfahren
MISUMISales area
Copyright © MISUMI Corporation All Rights Reserved.
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.