Kühlmittelbedarf

?* Informationen zur Lieferzeit

• 

  „Dumbo-Düse für Kühl-Dumbo“ (kein Sockel, flexible Röhrchenluftdüse)

  FUSO SEIKI

  • Mengenrabatt

  ab∗ ：	48.18 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  „Air Jet“ (Kühlsystem-Hauptgerät)

  TRUSCO NAKAYAMA

  [Features]
  · Cooling air temperature can be lowered up to 31°C below outside temperature.
  · Since it is air-cooling, cutting fluid is not required.

  ab∗ ：	91.35 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Klemmensystem (Schlauch)【2 Stk. pro Packung】

  NIKKI

  [Features]
  · The mating between the joints is solid and it maintains orientation extremely well.
  · Features outstanding chemical resistance, heat resistance, and shock resistance.

  • Mengenrabatt

  ab∗ ：	14.70 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Düse für magnetisches Kühlmittel

  TRUSCO NAKAYAMA

  [Features]
  · Replacement nozzle for magnetic coolant and magnet-based coolant.
  · Round blow (R type) with flow adjustment nozzle (from 0, stepless).
  [Applications]
  · For blowing cutting chips in cutting work.

  ab∗ ：	30.90 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Belüftungsventil für den Betrieb

  FUSO SEIKI

  ab∗ ：	79.86 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Ölkühler Halbtrocken „Magic-Cut-and-Mist“-Standardsatz

  FUSO SEIKI

  ab∗ ：	79.59 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  „Cool Dumbo“ (flexible Röhrchenluftdüse)

  FUSO SEIKI

  ab∗ ：	116.46 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Point Fit (Düse)

  NIKKI

  [Features]
  · The angle of the spray outlet can be adjusted within a ±35° range.
  · Maintains its orientation better than resin nozzles even with a high flow rate.
  · A metal nozzle that can withstand relatively high hydraulic pressure for circulating the coolant liquid. Even at the maximum inclination angle (35°), the flow rate will not decrease.

  ab∗ ：	22.22 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Magnetische Düse (zur Aufnahme von Schneidflüssigkeit)

  TRUSCO NAKAYAMA

  [Features]
  · The powerful 800 N magnet makes it easy to install in any position.
  · The angle and direction of the nozzle are freely adjustable.
  · The additional Rc1/4 screw holes allow two nozzles to be used.
  · Two independent screw holes are available.
  [Applications]
  · For cutting fluid lubrication.

  ab∗ ：	72.57 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Magnet für Air Jet/Luftdüse

  TRUSCO NAKAYAMA

  [Features]
  · An ultra-strong ON/OFF small magnet of 320 N.
  · The bottom surface has V-shape processing (150°) and can adhere to not only flat surfaces but also cylindrical surfaces.
  · Equipped with three screw holes Rc1/4. Can also be used for cutting fluids.
  · Allows easy setting.
  · Grinding finished surface adsorption force is S20C and plate thickness is 200 mm.
  [Applications]
  · For cutting fluid lubrication.
  · Manifold with strong small magnet, for 1/4" nozzles.

  ab∗ ：	46.24 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  „Gelenkzange“ (für Kühlmittelbuchse)

  TRUSCO NAKAYAMA

  [Features]
  · Material adopts die-cast aluminum and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.
  [Applications]
  · Coolant liner connection.

  ab∗ ：	61.25 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Luftkühlung

  TOHIN SHOJI

  • Mengenrabatt

  ab∗ ：	341.01 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Öldüse-Bohrpinole (MT-Schaftbohrer)

  NIKKEN KOSAKUSHO

  [Features]
  · For Morse taper shank drills.
  · Equipped with four coolant injection nozzles along the drill groove.
  · The nozzle position is a variable type, so a perfect coolant effect is demonstrated.
  · No costly oil hole drill required, allowing unattended operation as well.

  ab∗ ：	86.92 €
  Minimum Lieferzeit ：	auf Anfrage

  *Stückpreis Standardkonfiguration

• 

  Öldüse-Bohrpinole (für Zylinderschaftbohrer)

  NIKKEN KOSAKUSHO

  [Features]
  · For straight shank drill.
  · Equipped with four coolant injection nozzles along the drill groove.
  · The nozzle position is a variable type, so a perfect coolant effect is demonstrated.
  · No costly oil hole drill required, allowing unattended operation as well.

  ab∗ ：	72.48 €
  Minimum Lieferzeit ：	auf Anfrage

  *Stückpreis Standardkonfiguration

• 

  Öldüse Byte-Pinole

  NIKKEN KOSAKUSHO

  [Features]
  · For commercially available boring tool bits.
  · With powerful ejection oil hole groove.
  · Complete coolant effects for hole drilling work.
  · The blade edge is not damaged since continuous strong pressure blows off the cutting chips.

  ab∗ ：	72.48 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Schlange

  FUSO SEIKI

  ab∗ ：	27.67 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Spezielles Montagewerkzeug für Klemmensystem

  NIKKI

  [Features]
  · Special tool for connecting the Nikki-made coolant system.

  ab∗ ：	63.38 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Point Fit (Düse)

  NIKKI

  [Features]
  · The angle of the spray outlet can be adjusted within a ±35° range.
  · Maintains its orientation better than resin nozzles even with a high flow rate.
  · A metal nozzle that can withstand relatively high hydraulic pressure for circulating the coolant liquid. Even at the maximum inclination angle (35°), the flow rate will not decrease.

  ab∗ ：	33.33 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Point Fit (Düse)

  NIKKI

  [Features]
  · The angle of the spray outlet can be adjusted within a ±35° range.
  · Maintains its orientation better than resin nozzles even with a high flow rate.
  · A metal nozzle that can withstand relatively high hydraulic pressure for circulating the coolant liquid. Even at the maximum inclination angle (35°), the flow rate will not decrease.

  ab∗ ：	34.16 €
  Minimum Lieferzeit ：	auf Anfrage

  *Stückpreis Standardkonfiguration

• 

  Point Fit (Düse)

  NIKKI

  [Features]
  · The angle of the spray outlet can be adjusted within a ±35° range.
  · Maintains its orientation better than resin nozzles even with a high flow rate.
  · A metal nozzle that can withstand relatively high hydraulic pressure for circulating the coolant liquid. Even at the maximum inclination angle (35°), the flow rate will not decrease.

  • Mengenrabatt

  ab∗ ：	34.76 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Point Fit (Düse)

  NIKKI

  [Features]
  · The angle of the spray outlet can be adjusted within a ±35° range.
  · Maintains its orientation better than resin nozzles even with a high flow rate.
  · A metal nozzle that can withstand relatively high hydraulic pressure for circulating the coolant liquid. Even at the maximum inclination angle (35°), the flow rate will not decrease.

  ab∗ ：	23.04 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Point Fit (Düse)

  NIKKI

  [Features]
  · The angle of the spray outlet can be adjusted within a ±35° range.
  · Maintains its orientation better than resin nozzles even with a high flow rate.
  · A metal nozzle that can withstand relatively high hydraulic pressure for circulating the coolant liquid. Even at the maximum inclination angle (35°), the flow rate will not decrease.

  ab∗ ：	23.63 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Point Fit (Düse)

  NIKKI

  [Features]
  · The angle of the spray outlet can be adjusted within a ±35° range.
  · Maintains its orientation better than resin nozzles even with a high flow rate.
  · A metal nozzle that can withstand relatively high hydraulic pressure for circulating the coolant liquid. Even at the maximum inclination angle (35°), the flow rate will not decrease.

  ab∗ ：	24.49 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Point Fit (Düse)

  NIKKI

  [Features]
  · The angle of the spray outlet can be adjusted within a ±35° range.
  · Maintains its orientation better than resin nozzles even with a high flow rate.
  · A metal nozzle that can withstand relatively high hydraulic pressure for circulating the coolant liquid. Even at the maximum inclination angle (35°), the flow rate will not decrease.

  ab∗ ：	26.55 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Point Fit (Düse)

  NIKKI

  [Features]
  · The angle of the spray outlet can be adjusted within a ±35° range.
  · Maintains its orientation better than resin nozzles even with a high flow rate.
  · A metal nozzle that can withstand relatively high hydraulic pressure for circulating the coolant liquid. Even at the maximum inclination angle (35°), the flow rate will not decrease.

  ab∗ ：	27.37 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Point Fit (Düse)

  NIKKI

  [Features]
  · The angle of the spray outlet can be adjusted within a ±35° range.
  · Maintains its orientation better than resin nozzles even with a high flow rate.
  · A metal nozzle that can withstand relatively high hydraulic pressure for circulating the coolant liquid. Even at the maximum inclination angle (35°), the flow rate will not decrease.

  ab∗ ：	28.31 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Klemmensystem (Schlauchset)【1-7 Stk. pro Packung】

  NIKKI

  [Features]
  · The mating between the joints is solid and it maintains orientation extremely well.

  • Mengenrabatt

  ab∗ ：	24.10 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Klemmensystem (Düse)【4 Stk. pro Packung】

  NIKKI

  [Features]
  · The mating between the joints is solid and it maintains orientation extremely well.
  · Features outstanding chemical resistance, heat resistance, and shock resistance.

  • Mengenrabatt

  ab∗ ：	7.77 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kühlmittelsystem (Stecker)【4 Stk. pro Packung】

  NIKKI

  [Features]
  · The mating between the joints is solid and it maintains orientation extremely well.
  · Features outstanding chemical resistance, heat resistance, and shock resistance.

  • Mengenrabatt

  ab∗ ：	8.65 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Magnetsockel-Kühlmittel

  TRUSCO NAKAYAMA

  [Features]
  · With its powerful 600 N magnet, the coolant piping is very useful for metalworking sites.
  [Applications]
  · For the piping of coolant nozzles.

  ab∗ ：	92.57 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Magnetsockel-Kühlmittel

  TRUSCO NAKAYAMA

  [Features]
  · With its powerful 600 N magnet, the coolant piping is very useful for metalworking sites.
  · The flexible fluid nozzle can be used in either liquid or gas.
  · Flow rate can be adjusted by rotating the nozzle tip. (0 to stepless)
  [Applications]
  · For cooling, drying, and cleaning in metal processing.

  ab∗ ：	140.76 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Magnetisches Kühlmittel

  TRUSCO NAKAYAMA

  [Features]
  · Powerful magnet enables easy coolant piping.
  [Applications]
  · For the piping of coolant nozzles.

  ab∗ ：	80.99 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Magnetisches Kühlmittel

  TRUSCO NAKAYAMA

  [Features]
  · Powerful magnet enables easy coolant piping.
  · The flexible fluid nozzle can be used in either liquid or gas.
  · Flow rate can be adjusted by rotating the nozzle tip. (0 to stepless)
  [Applications]
  · For cooling, drying, and cleaning in metal processing.

  ab∗ ：	117.84 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flexible Öldüse

  TRUSCO NAKAYAMA

  [Features]
  · The special processing extends the life of the blade tip and clearly finishes worked surfaces.
  · The tip of the nozzle does not tilt forward compared to a plastic one.
  [Applications]
  · For cutting, cooling, and lubrication nozzles.
  · It is attached to the machine tool body and used for lubrication and cooling.

  ab∗ ：	47.90 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Endkappe für Magnetsockel

  TRUSCO NAKAYAMA

  [Features]
  · Can be used to plug unnecessary holes in the magnet base coolant.
  [Applications]
  · 2-axis/3-axis - Bracket for stopping up unnecessary holes.

  ab∗ ：	2.38 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  "Air Jet" (1 Düsensatz)

  TRUSCO NAKAYAMA

  [Features]
  · It is a cooling method that does not use cutting fluid.
  · Cooling air temperature can be lowered up to 31°C below outside temperature.
  · Since no machine is used, there is no breakdown and maintenance is easy.
  · A cooling device for dry processing applying 'Vortex Theory'.
  [Applications]
  · For cooling the blade and workpiece during cutting process.

  ab∗ ：	106.62 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Ölspritze

  TRUSCO NAKAYAMA

  [Features]
  · This product is capable of washing chip powder and the like generated by machine tools such as CNC/CMC by feeding cutting oil of the machine from the circulating pump to the oil gun.
  [Applications]
  · Cleaning the inside of machine tools.

  ab∗ ：	46.78 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Ersatzdüse für Air Jet/Luftdüse

  TRUSCO NAKAYAMA

  [Features]
  · Has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance.

  ab∗ ：	19.62 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Schalldämpfer für Air Jet/Luftdüse

  TRUSCO NAKAYAMA

  [Features]
  · Reduction in ventilation rate is exceedingly low thanks to low resistance.
  · This product is made of a flame-retardant material.

  ab∗ ：	8.09 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  „Kühlmittelbuchse“ (Schlauch)【1-10 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.

  ab∗ ：	9.05 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  „Kühlmittelbuchse“ (Schlauch)

  TRUSCO NAKAYAMA

  [Features]
  · Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.

  ab∗ ：	67.20 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  „Kühlmittelbuchse“ (Schlauch-Kit)【5-7 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.

  ab∗ ：	17.63 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  „Kühlmittelbuchse“ (2-tlg. Set)【2 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.

  ab∗ ：	13.09 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  „Kühlmittelbuchse“ (gerollter Schlauch)

  TRUSCO NAKAYAMA

  [Features]
  · Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.

  ab∗ ：	399.32 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  „Kühlmittelbuchse“ (90°-Düse)【1-10 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.

  ab∗ ：	3.92 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...