Lieferzeit |
|
---|
?* Informationen zur Lieferzeit
Koaxialstecker Ausführung SMA, Serie DM
FUJIKURA (DDK)
[Features]
· The DM series of connectors has built in compliance with the SMA type (Sub Miniature Type A) as prescribed in MIL-PRF-39012.
· These small, light, and robust 50 Ω class connectors offer excellent high-frequency properties when compared to conventional coaxial connectors. The DM series is designed to support smaller and higher-frequency modern communication devices.
· Screw coupling is used as the connection method for secure connections.
· Compatible with SMA-type connectors.
· Three cable mounting methods are available, namely crimping, soldering, and clamping.
ab∗ : | 0.70 € |
---|---|
Minimum Lieferzeit : | 33 Arbeitstage |
*Stückpreis Standardkonfiguration
Koaxialstecker Ausführung 75 Ω SMB, Serie 27CP
FUJIKURA (DDK)
[Features]
· The 27CP series of connectors correspond to a 75 Ω version of the 27DP series of connectors (50 Ω type).
· This connector, which is representative of small 75 Ω connectors, is frequently used in applications such as interfaces inside devices.
· The push-on method makes it easy to connect or disconnect.
· This part is not compatible with the 27DP series.
Minimum Lieferzeit : | 4 Arbeitstage |
---|
Koaxialstecker Ausführung SMB, Serie 27DP
FUJIKURA (DDK)
Connectors are made to be compliant with the SMB type defined in MIL-PRF-39012. Can be used for miniaturization and increasing the density of communications equipment
[Features]
• The 27DP series correspond to connectors made to be compliant with the SMB (Sub-Miniature Type B) type defined in MIL-PRF-39012.
· A 50 Ω connector for fine cabling that enables miniaturization and increased density of communications equipment.
• The coupling mechanism is push-on, and cables are mounted by crimping or soldering.
ab∗ : | 7.16 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Serie 31 – BNC-isolierte Steckhülsen (Ausführung für Plattenmontage)
FUJIKURA (DDK)
[Features]
• These insulated receptacles are panel mounted and connected to BNC series (plug) connectors.
· Reliable insulation is achieved between the external conductor of the connector and the panel.
▪ The ground terminal is connected to the external conductor and integrated with the mold adjacent to the central conductor. Hence, it is easy to handle.
• The round-pin contact types (31-10-CF and 31-10-CAu-CF) are UL-listed (UL File No. E72124).
ab∗ : | 2.63 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Serie BNC-RD – BNC-isolierte Steckhülse (Ausführung für Montage auf Platine)
FUJIKURA (DDK)
[Features]
·This insulated receptacle is a printed circuit board mounting type that mates with the BNC series (plugs).
·Reliable insulation achieved between the external conductor of the connector and the panel.
▪ The ground terminal is connected to the external conductor and integrated with the mold adjacent to the central conductor. Hence, it is easy to handle.
·As a VA product, this receptacle's contact uses sound or shape (press contact).
·The receptacle can be mounted on a printed circuit board either vertically or horizontally.
·The height from the printed circuit board is low, at 14.0 mm when the receptacle is mounted horizontally on the printed circuit board.
· The product can be used in an extensive range of applications, including computers, communication devices, and medical devices.
ab∗ : | 0.70 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Serie BNC 75 – 75 ΩBNC-geformter Koaxialstecker
FUJIKURA (DDK)
These are the 75 Ω counterparts of the BNC series connectors (50 Ω). The bayonet lock system is easy to attach and remove.
[Features]
• The BNC75 series connectors are the 75-Ω counterparts of the BNC series (50 Ω).
• Interchangeable with the BNC series.
• The bayonet locking system is easy to attach and remove.
ab∗ : | 0.70 € |
---|---|
Minimum Lieferzeit : | 73 Arbeitstage |
*Stückpreis Standardkonfiguration
Serie BNC – Koaxialstecker Ausführung BNC
FUJIKURA (DDK)
[Features]
• BNC series connectors are used in a wide range of products as 50-Ω coaxial connectors.
• Compact and lightweight, these connectors are often used as interfaces, particularly for equipment that is frequently mounted and dismounted, thanks to their easily coupled and disengaged bayonet lock connection mechanism.
• If you use 75-Ω cables, use these connectors at frequencies of 200 MHz or less.
• When exceeding 200 MHz, use BNC75 series connectors.
• BNC and BNC75 series connectors are interchangeable.
Minimum Lieferzeit : | 4 Arbeitstage |
---|
Serie MMCX – ultrakompakte Koaxialstecker
FUJIKURA (DDK)
[Features]
• The MMCX series corresponds to push-on lock style connectors suitable for use with extremely fine coaxial cables. They are ideal when space is at a premium.
• Straight, right-angle, and SMT-mounted types are available.
• These connectors boast excellent frequency characteristics of approximately DC 6 GHz and a VSWR of 1.2 max.
ab∗ : | 0.70 € |
---|---|
Minimum Lieferzeit : | 73 Arbeitstage |
*Stückpreis Standardkonfiguration
Koaxialstecker Ausführung N, Serie N
FUJIKURA (DDK)
[Features]
• The N series are 50 Ù-type 7-mm coaxial connectors (inner diameter of outer conductor) with an excellent track record.
• A wide variety is offered to fit various types of cable.
(Note): This is not compatible with the NC series (75-Ω series), so please be careful.
Minimum Lieferzeit : | 4 Arbeitstage |
---|
SMB-Steckverbinder (kostengünstiges Bauteil) – Serie PSC
FUJIKURA (DDK)
[Features]
· This push-on coaxial connector is a small, lightweight product that provides compatibility with MIL standard SMB connectors.
· Uses press-molded parts to reduce costs.
· Usable frequency range is up to 4 GHz DC with a voltage standing wave ratio of 1.2 or lower.
· Mated height is 9 mm or lower from the circuit board.
· Both flexible and semi-flexible cables are supported.
ab∗ : | 0.70 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Kleiner Koaxialstecker –Serie PSD
FUJIKURA (DDK)
[Features]
· The PSD series is an MIL-STD-348A-compliant SMP series of small push-on lock coaxial connectors.
· There is little of the instability characteristic of the push-on type of connector at the time of fitting, and performance is stable even at high frequencies.
ab∗ : | 0.70 € |
---|---|
Minimum Lieferzeit : | 73 Arbeitstage |
*Stückpreis Standardkonfiguration
Koaxialstecker Ausführung 75 Ω SSMB, Serie SSMB75
FUJIKURA (DDK)
[Features]
· The SSMB75 series corresponds to a 75 Ω connector version of the SSMB series (50 Ω type).
· This ultra small push-on type 75 Ω connector was originally developed by DDK, and is frequently used for applications such as interfaces inside devices.
· The adoption of a closed entry structure protects this connector against prying.
· One to five series types are available for L-shaped receptacles (for use on printed circuit boards).
· Not compatible with the SSMB series.
ab∗ : | 0.70 € |
---|---|
Minimum Lieferzeit : | 73 Arbeitstage |
*Stückpreis Standardkonfiguration
Koaxialstecker Ausführung SSMB – Serie SSMB
FUJIKURA (DDK)
These coaxial connectors are ultra-low profile, push-on type connectors compliant with IEC-Pub.169-19.
[Features]
• Ultra-low profile, push-on type connectors made for compact, higher density communications equipment, these coaxial connectors are compliant with IEC-Pub.169-19.
• The height from the PCB when coupled is 6 mm or less (when SP and LR are coupled) or 11 mm or less (when LP and SP are coupled).
ab∗ : | 0.70 € |
---|---|
Minimum Lieferzeit : | 73 Arbeitstage |
*Stückpreis Standardkonfiguration
Koaxialstecker Ausführung TNC, Serie TNC
FUJIKURA (DDK)
[Features]
· The TNC Series connectors convert the BNC Series connectors to a screw-coupling method.
· The screw-coupling method is mechanically strong and resistant to external vibrations with negligible high-frequency leakage.
· The TNC Series conforms electrically and mechanically to the BNC Series.
· The recommended torque for tightening the coupling is 45–68.6 N⋅cm.
ab∗ : | 0.70 € |
---|---|
Minimum Lieferzeit : | 73 Arbeitstage |
*Stückpreis Standardkonfiguration
Serie 27 DS – Koaxialsteckverbinder Ausführung SMC
FUJIKURA (DDK)
These connectors are made to be compliant with the SMC type defined in MIL-PRF-39012. Applicable to miniaturization and high density of communication equipment
[Features]
· The 27DS series are connectors made to be compliant with the SMC (SubMiniature Type C) type defined in MIL-PRF-39012.
· This is a 50 Ω connector for a fine cable that is compatible with efforts to make communications equipment small and dense.
· We recommend tightening couplings to a torque of 24.5–35.3 Ncm.
ab∗ : | 22.82 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Warenzeichen |
---|
Artikelserie |
CAD |
ab∗ |
Minimum Lieferzeit : |
Steckerform |
A· B· C |
D· E· F |
G·H·I |
J·K·L |
M·N·O |
P· Q· R |
S· T· U |
V· W· X |
Anzahl |
paßender Sift / Kontakt |
Anzahl der Adern |
Anwendung |
Zulässiger Strom(A) |
Zulässige Spannung(V) |
Verdrahtungsverfahren |
Anschlussrichtung |
Schutzfunktion (umweltbeständig) |
Impedanz(Ω) |
Repräsentativer Standard |
Warenzeichen | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Artikelserie | Serie 31 – BNC-isolierte Steckhülsen (Ausführung für Plattenmontage) | Serie BNC-RD – BNC-isolierte Steckhülse (Ausführung für Montage auf Platine) | |||||||||||||
CAD |
| ||||||||||||||
ab∗ | 0.70 € *Stückpreis Standardkonfiguration Mengenrabatt | - Mengenrabatt | 7.16 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.63 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.70 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.70 € *Stückpreis Standardkonfiguration Mengenrabatt | - Mengenrabatt | 0.70 € *Stückpreis Standardkonfiguration Mengenrabatt | - Mengenrabatt | 0.70 € *Stückpreis Standardkonfiguration | 0.70 € *Stückpreis Standardkonfiguration | 0.70 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.70 € *Stückpreis Standardkonfiguration | 0.70 € *Stückpreis Standardkonfiguration | 22.82 € *Stückpreis Standardkonfiguration Mengenrabatt |
Minimum Lieferzeit : | 33 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 73 Arbeitstage | 4 Arbeitstage | 73 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 73 Arbeitstage | 73 Arbeitstage | 73 Arbeitstage | 73 Arbeitstage | 4 Arbeitstage |
Steckerform | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial |
A· B· C | - | - | - | - | Sonstige | Sonstige | BNC | - | - | - | - | - | - | - | - |
D· E· F | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
G·H·I | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
J·K·L | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
M·N·O | - | - | - | - | - | - | - | Sonstige | N | - | - | - | - | - | - |
P· Q· R | - | - | - | - | - | - | - | - | - | Sonstige | Sonstige | - | - | - | - |
S· T· U | - | - | - | - | - | - | - | - | - | - | - | Sonstige | Sonstige | Sonstige | - |
V· W· X | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Anzahl | - | Sonstige | Sonstige | Sonstige | - | - | - | - | - | - | - | - | - | - | Sonstige |
paßender Sift / Kontakt | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) |
Anzahl der Adern | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Anwendung | Kabelanschluss / Plattenmontagen | Kabelanschluss / Für Leiterplatten / Plattenmontagen | Kabelanschluss / Für Leiterplatten / Plattenmontagen | Plattenmontagen | Für Leiterplatten | Kabelanschluss / Plattenmontagen | Kabelanschluss / Plattenmontagen | Kabelanschluss / Für Leiterplatten | Kabelanschluss / Plattenmontagen | Kabelanschluss / Für Leiterplatten | Für Leiterplatten | Kabelanschluss / Für Leiterplatten | Kabelanschluss | Kabelanschluss / Plattenmontagen | Kabelanschluss / Für Leiterplatten / Plattenmontagen |
Zulässiger Strom(A) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Zulässige Spannung(V) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Verdrahtungsverfahren | Lötmittel / Crimp | Crimp | Lötmittel / Crimp | - | - | Lötmittel / Crimp | Lötmittel / Crimp | - | Lötmittel | - | - | Crimp | Crimp | Crimp | Crimp |
Anschlussrichtung | Gerade / Winkel | Gerade / Winkel | Gerade / Winkel | Gerade | Gerade / Winkel | Gerade | Gerade / Winkel | Gerade / Winkel | Gerade / Winkel | Gerade / Winkel | Winkel | Gerade / Winkel | Gerade / Winkel | Gerade | Gerade / Winkel |
Schutzfunktion (umweltbeständig) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Impedanz(Ω) | 50 | 75 | 50 | Sonstige | Sonstige | 75 | 50 | 50 | 50 | 50 | 50 | 75 | 50 | 50 | 50 |
Repräsentativer Standard | - | - | - | UL | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.